PubMed Health⌕ Search

Biomedical subjects

Hung Ton-That

Publications and source records attributed to Hung Ton-That.

14 recordsLinked to original sources
PubMed2026

A two-factor authentication mechanism licenses pilins for pilus assembly in gram-positive bacteria.

Gram-positive bacteria display virulence-associated pili that facilitate adhesion and biofilm formation. These pili are covalently polymerized by class C sortase enzymes, which selectively recognize their cognate pilin substrates amid numerous cell wall sorting signal (CWSS)-bearing proteins. The molecular basis for this stringent substrate specificity has remained unclear. Here, we develop a rapid, quantitative fluorescence-activated cell sorting assay to monitor pilus assembly in Corynebacterium diphtheriae, enabling high-throughput analysis of SpaA pilin and SrtA sortase variants. Using this platform, together with molecular modeling and dynamics simulations, we show that SrtA engages nearly the entire SpaA CWSS to form a membrane-embedded complex that incorporates not only the LPXTG motif but also its connector and transmembrane helix elements. Formation of this interface displaces an inhibitory active-site lid and activates the enzyme to load the pilin substrate. Systematic CWSS swapping experiments and deep mutational scanning further support this model, demonstrating that noncognate pilins are excluded because they fail to form the required interface. Conversely, SrtA variants with an artificially unlatched lid bypass the need for this interface, indicating that membrane-driven complex formation is important for substrate licensing. Together, these findings define a "two-factor authentication" mechanism for pilus assembly in gram-positive bacteria: class C sortases first verify pilin identity by forming a membrane-embedded interface that activates the enzyme, then they recognize the LPXTG motif to initiate loading and crosslinking. This work provides a unified molecular framework for selective pilin incorporation in gram-positive bacteria and identifies potential vulnerabilities in the licensing machinery that may be exploited therapeutically.

Fimbriae, Bacterial↗
PubMed2006

Type III pilus of corynebacteria: Pilus length is determined by the level of its major pilin subunit.

Multiple pilus gene clusters have been identified in several gram-positive bacterial genomes sequenced to date, including the Actinomycetales, clostridia, streptococci, and corynebacteria. The genome of Corynebacterium diphtheriae contains three pilus gene clusters, two of which have been previously characterized. Here, we report the characterization of the third pilus encoded by the spaHIG cluster. By using electron microscopy and biochemical analysis, we demonstrate that SpaH forms the pilus shaft, while SpaI decorates the structure and SpaG is largely located at the pilus tip. The assembly of the SpaHIG pilus requires a specific sortase located within the spaHIG pilus gene cluster. Deletion of genes specific for the synthesis and polymerization of the other two pilus types does not affect the SpaHIG pilus. Moreover, SpaH but not SpaI or SpaG is essential for the formation of the filament. When expressed under the control of an inducible promoter, the amount of the SpaH pilin regulates pilus length; no pili are assembled from an SpaH precursor that has an alanine in place of the conserved lysine of the SpaH pilin motif. Thus, the spaHIG pilus gene cluster encodes a pilus structure that is independently assembled and antigenically distinct from other pili of C. diphtheriae. We incorporate these findings in a model of sortase-mediated pilus assembly that may be applicable to many gram-positive pathogens.

Bacterial Proteins↗
PubMed2006

Assembly of distinct pilus structures on the surface of Corynebacterium diphtheriae.

Different surface organelles contribute to specific interactions of a pathogen with host tissues or infectious partners. Multiple pilus gene clusters potentially encoding different surface structures have been identified in several gram-positive bacterial genomes sequenced to date, including actinomycetales, clostridia, corynebacteria, and streptococci. Corynebacterium diphtheriae has been shown to assemble a pilus structure, with sortase SrtA essential for the assembly of a major subunit SpaA and two minor proteins, SpaB and SpaC. We report here the characterization of a second pilus consisting of SpaD, SpaE, and SpaF, of which SpaD and SpaE form the pilus shaft and SpaF may be located at the pilus tip. The structure of the SpaDEF pilus contains no SpaABC pilins as detected by immunoelectron microscopy. Neither deletion of spaA nor sortase srtA abolishes SpaDEF pilus formation. The assembly of the SpaDEF pilus requires specific sortases located within the SpaDEF pilus gene cluster. Although either sortase SrtB or SrtC is sufficient to polymerize SpaDF, the incorporation of SpaE into the SpaD pili requires sortase SrtB. In addition, an alanine in place of the lysine of the SpaD pilin motif abrogates pilus polymerization. Thus, SpaD, SpaE, and SpaF constitute a different pilus structure that is independently assembled and morphologically distinct from the SpaABC pili and possibly other pili of C. diphtheriae.

ATP-Binding Cassette Transporters↗
PubMed2005

Bacillus anthracis sortase A (SrtA) anchors LPXTG motif-containing surface proteins to the cell wall envelope.

Cell wall-anchored surface proteins of gram-positive pathogens play important roles during the establishment of many infectious diseases, but the contributions of surface proteins to the pathogenesis of anthrax have not yet been revealed. Cell wall anchoring in Staphylococcus aureus occurs by a transpeptidation mechanism requiring surface proteins with C-terminal sorting signals as well as sortase enzymes. The genome sequence of Bacillus anthracis encodes three sortase genes and eleven surface proteins with different types of cell wall sorting signals. Purified B. anthracis sortase A cleaved peptides encompassing LPXTG motif-type sorting signals between the threonine (T) and the glycine (G) residues in vitro. Sortase A activity could be inhibited by thiol-reactive reagents, similar to staphylococcal sortases. B. anthracis parent strain Sterne 34F(2), but not variants lacking the srtA gene, anchored the collagen-binding MSCRAMM (microbial surface components recognizing adhesive matrix molecules) BasC (BA5258/BAS4884) to the bacterial cell wall. These results suggest that B. anthracis SrtA anchors surface proteins bearing LPXTG motif sorting signals to the cell wall envelope of vegetative bacilli.

Amino Acid Motifs↗
PubMed2004

Protein sorting to the cell wall envelope of Gram-positive bacteria.

The covalent anchoring of surface proteins to the cell wall envelope of Gram-positive bacteria occurs by a universal mechanism requiring sortases, extracellular transpeptidases that are positioned in the plasma membrane. Surface protein precursors are first initiated into the secretory pathway of Gram-positive bacteria via N-terminal signal peptides. C-terminal sorting signals of surface proteins, bearing an LPXTG motif or other recognition sequences, provide for sortase-mediated cleavage and acyl enzyme formation, a thioester linkage between the active site cysteine residue of sortase and the C-terminal carboxyl group of cleaved surface proteins. During cell wall anchoring, sortase acyl enzymes are resolved by the nucleophilic attack of peptidoglycan substrates, resulting in amide bond formation between the C-terminal end of surface proteins and peptidoglycan cross-bridges within the bacterial cell wall envelope. The genomes of Gram-positive bacteria encode multiple sortase genes. Recent evidence suggests that sortase enzymes catalyze protein anchoring reactions of multiple different substrate classes with different sorting signal motif sequences, protein linkage to unique cell wall anchor structures as well as protein polymerization leading to the formation of pili on the surface of Gram-positive bacteria.

Aminoacyltransferases↗
PubMed2004

Anchoring of surface proteins to the cell wall of Staphylococcus aureus. A conserved arginine residue is required for efficient catalysis of sortase A.

Surface proteins of Staphylococcus aureus are anchored to the cell wall envelope by a mechanism requiring a C-terminal sorting signal with an LPXTG motif. Sortase A cleaves surface proteins between the threonine (T) and the glycine (G) residues of the LPXTG motif and catalyzes the formation of an amide bond between the carboxyl group of threonine at the C-terminal end of polypeptides and the amino group of pentaglycine cross-bridges of cell wall peptidoglycan. Previous work showed that Cys(184) and His(120) of sortase A are absolutely essential for catalysis; however an active site thiolateimidazolium ion pair may not be formed. The three-dimensional crystal structure of sortase A revealed that Arg(197) is located in close proximity to both the active site Cys(184) and the scissile peptide bond between threonine and glycine. We show here that substitution of Arg(197) with alanine, lysine, or histidine severely reduced sortase A function both in vivo and in vitro, whereas Asn(98), which had earlier been implicated in hydrogen bonding to His(120), was found to be dispensable for catalysis. As the structural proximity of Arg(197) and Cys(184) is conserved in sortase enzymes and as ionization of the Cys(184) sulfhydryl group seems required for sortase activity, we propose that Arg(197) may function as a base, facilitating thiolate formation during sortase-mediated cleavage and transpeptidation reactions.

Aminoacyltransferases↗
PubMed2004

Crystal structures of Staphylococcus aureus sortase A and its substrate complex.

The cell wall envelope of staphylococci and other Gram-positive pathogens is coated with surface proteins that interact with human host tissues. Surface proteins of Staphylococcus aureus are covalently linked to the cell wall envelope by a mechanism requiring C-terminal sorting signals with an LPXTG motif. Sortase (SrtA) cleaves surface proteins between the threonine (T) and the glycine (G) of the LPXTG motif and catalyzes the formation of an amide bond between threonine at the C-terminal end of polypeptides and cell wall cross-bridges. The active site architecture and catalytic mechanism of sortase A has hitherto not been revealed. Here we present the crystal structures of native SrtA, of an active site mutant of SrtA, and of the mutant SrtA complexed with its substrate LPETG peptide and describe the substrate binding pocket of the enzyme. Highly conserved proline (P) and threonine (T) residues of the LPXTG motif are held in position by hydrophobic contacts, whereas the glutamic acid residue (E) at the X position points out into the solvent. The scissile T-G peptide bond is positioned between the active site Cys(184) and Arg(197) residues and at a greater distance from the imidazolium side chain of His(120). All three residues, His(120), Cys(184), and Arg(197), are conserved in sortase enzymes from Gram-positive bacteria. Comparison of the active sites of S. aureus sortase A and sortase B provides insight into substrate specificity and suggests a universal sortase-catalyzed mechanism of bacterial surface protein anchoring in Gram-positive bacteria.

Amino Acid Motifs↗
PubMed2004

Sortases and pilin elements involved in pilus assembly of Corynebacterium diphtheriae.

Corynebacterium diphtheriae SpaA pili are composed of three pilin subunits, SpaA, SpaB and SpaC. SpaA, the major pilin protein, is distributed uniformly along the pilus shaft, whereas SpaB is observed at regular intervals, and SpaC seems to be positioned at the pilus tip. Pilus assembly in C. diphtheriae requires the pilin motif and the C-terminal sorting signal of SpaA, and is proposed to occur by a mechanism of ordered cross-linking, whereby pilin-specific sortase enzymes cleave precursor proteins at sorting signals and involve the side-chain amino groups of pilin motif sequences to generate covalent linkages between pilin subunits. We show here that two elements of SpaA pilin precursor, the pilin motif and the sorting signal, are together sufficient to promote the polymerization of an otherwise secreted protein by a process requiring the function of the sortase A gene (srtA). Five other sortase genes are dispensable for SpaA pilus assembly. Further, the incorporation of SpaB into SpaA pili requires a glutamic acid residue within the E box motif of SpaA, a feature that is found to be conserved in other Gram-positive pathogens that encode sortase and pilin subunit genes with sorting signals and pilin motifs. When the main fimbrial subunit of Actinomyces naeslundii type I fimbriae, FimA, is expressed in corynebacteria, C. diphtheriae strain NCTC13129 polymerized FimA to form short fibres. Although C. diphtheriae does not depend on other actinomycetal genes for FimA polymerization, this process involves the pilin motif and the sorting signal of FimA as well as corynebacterial sortase D (SrtD). Thus, pilus assembly in Gram-positive bacteria seems to occur by a universal mechanism of ordered cross-linking of precursor proteins, the multiple conserved features of which are recognized by designated sortase enzymes.

Amino Acid Sequence↗
PubMed2003

Assembly of pili on the surface of Corynebacterium diphtheriae.

Pili of Gram-negative pathogens are formed from pilin precursor molecules by non-covalent association within the outer membrane envelope. Gram-positive microbes employ the cell wall peptidoglycan as a surface organelle for the covalent attachment of proteins, however, an assembly pathway for pili has not yet been revealed. We show here that pili of Corynebacterium diphtheriae are composed of three pilin subunits, SpaA, SpaB and SpaC. SpaA, the major pilin protein, is distributed uniformly along the pilus shaft, whereas SpaB is observed at regular intervals and SpaC seems positioned at the pilus tip. Assembled pili are released from the bacterial surface by treatment with murein hydrolase, suggesting that the pilus fibres may be anchored to the cell wall envelope. All three pilin subunit proteins are synthesized as precursors carrying N-terminal signal peptides and C-terminal sorting signals. Some, but not all, of the six sortase genes encoded in the genome of C. diphtheriae are required for precursor processing, pilus assembly or cell wall envelope attachment. Pilus assembly is proposed to occur by a mechanism of ordered cross-linking, whereby pilin-specific sortase enzymes cleave precursor proteins at sorting signals and involve the side chain amino groups of pilin motif sequences to generate links between pilin subunits. This covalent tethering of adjacent pilin subunits appears to have evolved in many Gram-positive pathogens that encode sortase and pilin subunit genes with sorting signals and pilin motifs.

Adhesins, Bacterial↗
PubMed2002

Anchoring of surface proteins to the cell wall of Staphylococcus aureus. III. Lipid II is an in vivo peptidoglycan substrate for sortase-catalyzed surface protein anchoring.

Surface proteins of Staphylococcus aureus are anchored to the cell wall peptidoglycan by a mechanism requiring a C-terminal sorting signal with an LPXTG motif. Surface proteins are first synthesized in the bacterial cytoplasm and then transported across the cytoplasmic membrane. Cleavage of the N-terminal signal peptide of the cytoplasmic surface protein P1 precursor generates the extracellular P2 species, which is the substrate for the cell wall anchoring reaction. Sortase, a membrane-anchored transpeptidase, cleaves P2 between the threonine (T) and the glycine (G) of the LPXTG motif and catalyzes the formation of an amide bond between the carboxyl group of threonine and the amino group of cell wall cross-bridges. We have used metabolic labeling of staphylococcal cultures with [(32)P]phosphoric acid to reveal a P3 intermediate. The (32)P-label of immunoprecipitated surface protein is removed by treatment with lysostaphin, a glycyl-glycine endopeptidase that separates the cell wall anchor structure. Furthermore, the appearance of P3 is prevented in the absence of sortase or by the inhibition of cell wall synthesis. (32)P-Labeled cell wall anchor species bind to nisin, an antibiotic that is known to form a complex with lipid II. Thus, it appears that the P3 intermediate represents surface protein linked to the lipid II peptidoglycan precursor. The data support a model whereby lipid II-linked polypeptides are incorporated into the growing peptidoglycan via the transpeptidation and transglycosylation reactions of cell wall synthesis, generating mature cell wall-linked surface protein.

Amino Acid Sequence↗
PubMed2002

An iron-regulated sortase anchors a class of surface protein during Staphylococcus aureus pathogenesis.

Sortase (SrtA), an enzyme that anchors surface proteins to the cell wall of Gram-positive bacteria, cleaves sorting signals at the LPXTG motif. We have identified a second sortase (SrtB) in the Gram-positive pathogen Staphylococcus aureus that is required for anchoring of a surface protein with a NPQTN motif. Purified SrtB cleaves NPQTN-bearing peptides in vitro, and a srtB mutant is defective in the persistence of animal infections. srtB is part of an iron-regulated locus called iron-responsive surface determinants (isd), which also contains a ferrichrome transporter and surface proteins with NPQTN and LPXTG motifs. Cell wall-anchored surface proteins and the isd locus seem involved in a novel mechanism of iron acquisition that is important for bacterial pathogenesis.

Alleles↗
PubMed2001

Anchoring of surface proteins to the cell wall of Staphylococcus aureus. Cysteine 184 and histidine 120 of sortase form a thiolate-imidazolium ion pair for catalysis.

Surface proteins of Staphylococcus aureus are anchored to the cell wall peptidoglycan by a mechanism requiring a C-terminal sorting signal with a LPXTG motif. Sortase cleaves polypeptides between the threonine and the glycine of the LPXTG motif. The carboxyl group of threonine is subsequently amide-linked to the amino group of peptidoglycan cross-bridges. The three-dimensional structure of sortase revealed the close proximity of the catalytic site residue cysteine 184 with histidine 120; however, no structural evidence for a thiolate-imidazolium ion pair could be detected. We report that alanine substitution of either cysteine 184 or histidine 120 abolishes in vivo and in vitro sorting reactions. Further, alanine substitution of tryptophan 194, a residue that is in close proximity of histidine 120, reduces the transpeptidase activity of sortase. These results suggest a model whereby sortase forms a thiolate-imidazolium ion pair for the catalysis of its transpeptidation reaction and that the position of tryptophan 194 assists in the formation of this ion pair.

Alanine↗