Biomedical subjects

Hyoung-Joon Jin

Publications and source records attributed to Hyoung-Joon Jin.

9 recordsLinked to original sources

PubMed2006

Electrospun silk-BMP-2 scaffolds for bone tissue engineering.

Silk fibroin fiber scaffolds containing bone morphogenetic protein 2 (BMP-2) and/or nanoparticles of hydroxyapatite (nHAP) prepared via electrospinning were used for in vitro bone formation from human bone marrow-derived mesenchymal stem cells (hMSCs). BMP-2 survived the aqueous-based electrospinnig process in bioactive form. hMSCs were cultured for up to 31 days under static conditions in osteogenic media on the scaffolds (silk/PEO/BMP-2, silk/PEO/nHAP, silk/PEO/nHAP/BMP-2) and controls (silk/PEO, silk/PEO extracted). Electrospun silk fibroin-based scaffolds supported hMSC growth and differentiation toward osteogenic outcomes. The scaffolds with the co-processed BMP-2 supported higher calcium deposition and enhanced transcript levels of bone-specific markers than in the controls, indicating that these nanofibrous electrospun silk scaffolds were an efficient delivery system for BMP-2. X-ray diffraction (XRD) analysis revealed that the apatite formed on the silk fibroin/BMP-2 scaffolds had higher crystallinity than on the silk fibroin scaffold controls. In addition, nHAP particles were incorporated into the electrospun fibrous scaffolds during processing and improved bone formation. The coexistence of BMP-2 and nHAP in the electrospun silk fibroin fibers resulted in the highest calcium deposition and upregulation of BMP-2 transcript levels when compared with the other systems. The results suggest that electrospun silk-fibroin-based scaffolds are potential candidates for bone tissue engineering. Furthermore, the mild aqueous process required to spin the fibers offers an important option for delivery of labile cytokines and other components into the system.

Adult↗

PubMed2006

Electrically conductive bacterial cellulose by incorporation of carbon nanotubes.

Electrically conducting polymeric membranes were prepared by incorporating multiwalled carbon nanotubes (MWCNTs) into bacterial cellulose pellicles produced by Gluconacetobacter xylinum. The MWCNTs were dispersed in a surfactant (cationic cetyl trimethylammonium bromide) solution, and cellulose pellicles were dipped into the solution for 6, 12, and 24 h. The surfactants were then extracted in pure water and dried. Electron microscopy showed that the individual MWCNTs were strongly adhered to the surface and the inside of the cellulose pellicle. The conductivity of the MWCNTs-incorporated cellulose pellicle, as measured by a four-probe at room temperature, was 1.4 x 10(-1) S/cm, based on the total cross-sectional area (approximately 9.6 wt % of MWCNTs). This suggests that the MWCNTs were incorporated uniformly and densely into the pellicles.

Cations↗

PubMed2004

Human bone marrow stromal cell responses on electrospun silk fibroin mats.

Fibers with nanoscale diameters provide benefits due to high surface area for biomaterial scaffolds. In this study electrospun silk fibroin-based fibers with average diameter 700+/-50 nm were prepared from aqueous regenerated silkworm silk solutions. Adhesion, spreading and proliferation of human bone marrow stromal cells (BMSCs) on these silk matrices was studied. Scanning electron microscopy (SEM) and MTT analyses demonstrated that the electrospun silk matrices supported BMSC attachment and proliferation over 14 days in culture similar to native silk fibroin (approximately 15 microm fiber diameter) matrices. The ability of electrospun silk matrices to support BMSC attachment, spreading and growth in vitro, combined with a biocompatibility and biodegradable properties of the silk protein matrix, suggest potential use of these biomaterial matrices as scaffolds for tissue engineering.

Adolescent↗

PubMed2003

Mechanism of silk processing in insects and spiders.

Silk spinning by insects and spiders leads to the formation of fibres that exhibit high strength and toughness. The lack of understanding of the protein processing in silk glands has prevented the recapitulation of these properties in vitro from reconstituted or genetically engineered silks. Here we report the identification of emulsion formation and micellar structures from aqueous solutions of reconstituted silkworm silk fibroin as a first step in the process to control water and protein-protein interactions. The sizes (100-200 nm diameter) of these structures could be predicted from hydrophobicity plots of silk protein primary sequence. These micelles subsequently aggregated into larger 'globules' and gel-like states as the concentration of silk fibroin increased, while maintaining solubility owing to the hydrophilic regions of the protein interspersed among the larger hydrophobic regions. Upon physical shearing or stretching structural transitions, increased birefringence and morphological alignment were demonstrated, indicating that this process mimics the behaviour of similar native silk proteins in vivo. Final morphological features of these silk materials are similar to those observed in native silkworm fibres.

Animals↗

PubMedDate not supplied

Electrospinning Bombyx mori silk with poly(ethylene oxide).

Electrospinning for the formation of nanoscale diameter fibers has been explored for high-performance filters and biomaterial scaffolds for vascular grafts or wound dressings. Fibers with nanoscale diameters provide benefits due to high surface area. In the present study we explore electrospinning for protein-based biomaterials to fabricate scaffolds and membranes from regenerated silkworm silk, Bombyx mori, solutions. To improve processability of the protein solution, poly(ethylene oxide) (PEO) with molecular weight of 900,000 was blended with the silk fibroin. A variety of compositions of the silk/PEO aqueous blends were successfully electrospun. The morphology of the fibers was characterized using high-resolution scanning electron microscopy. Fiber diameters were uniform and less than 800 nm. The composition was estimated by X-ray photoelectron spectroscopy to characterize silk/PEO surface content. Aqueous-based electrospining of silk and silk/PEO blends provides potentially useful options for the fabrication of biomaterial scaffolds based on this unique fibrous protein.

Animals↗

PubMedDate not supplied

X-ray evidence for a "super"-secondary structure in silk fibers.

X-ray studies on degummed B. mori silk fibers and on hydrogels prepared under a variety of conditions reveal moderately small angle reflections. These reflections are often highly oriented and are correlated to silk II lattice reflections. A superstructure can explain these features. Silk fibroin hydrogels were monitored as they dried to form the silk II structure. The silk II wide angle and moderately small angle patterns obtained from dried hydrogels and silk fibers are identical. The "superstructure" reflections at moderately small angle (3-7 nm) were first to appear, followed by the "intersheet" spacing, and then the remainder of the silk II wide angle scattering pattern. Thus, any superstructure hypothesized for the hydrogels (and for Silk II in fibers) must be both stable in a highly hydrated environment and must convert to silk II with little large scale diffusion. A folded structure, similar to amyloids and cross-beta-sheets but with much longer beta-strand stems, is proposed for silk II in fibers.

Animals↗

PubMedDate not supplied

Porous 3-D scaffolds from regenerated silk fibroin.

Three fabrication techniques, freeze-drying, salt leaching and gas foaming, were used to form porous three-dimensional silk biomaterial matrixes. Matrixes were characterized for morphological and functional properties related to processing method and conditions. The porosity of the salt leached scaffolds varied between 84 and 98% with a compressive strength up to 175 +/- 3 KPa, and the gas foamed scaffolds had porosities of 87-97% and compressive strength up to 280 +/- 4 KPa. The freeze-dried scaffolds were prepared at different freezing temperatures (-80 and -20 degrees C) and subsequently treated with different concentrations (15 and 25%) and hydrophilicity alcohols. The porosity of these scaffolds was up to 99%, and the maximum compressive strength was 30 +/- 2 KPa. Changes in silk fibroin structure during processing to form the 3D matrixes were determined by FT-IR and XrD. The salt leached and gas foaming techniques produced scaffolds with a useful combination of high compressive strength, interconnected pores, and pore sizes greater than 100 microns in diameter. The results suggest that silk-based 3D matrixes can be formed for utility in biomaterial applications.

Animals↗

PubMedDate not supplied

Biomaterial films of Bombyx mori silk fibroin with poly(ethylene oxide).

Phase separation into controllable patterned microstructures was observed for Bombyx mori silkworm silk and poly(ethylene oxide) (PEO) (900000 g/mol) blends cast from solution. The evolution of the microstructures with increasing PEO volume fraction is strikingly similar to the progression of phases and microstructures observed with surfactants. The chemically patterned materials obtained provide engineerable biomaterial surfaces with predictable microscale features which can be used to create topographically patterned or chemically functionalized biomaterials. Solution blending was used to incorporate water-soluble PEO into silk to enhance elasticity and hydrophilicity. The sizes of the globule fibroin phase ranged from 2.1 +/- 0.5 to 18.2 +/- 2.1 microm depending on the ratio of silk/PEO. Optical microscopy and SEM analysis confirmed the micro-phase separation between PEO and silk. Surface properties were determined by XPS and contact angle. Methanol can be used to control the conformational transition of silk fibroin to the insoluble beta-sheet state. Subsequentially, the PEO can be easily extracted from the films with water to generate silk matrixes with definable porosity and enhanced surface roughness. These blend films formed from two biocompatible polymers provide potential new biomaterials for tissue engineering scaffolds.

Animals↗

PubMedDate not supplied

Structure and properties of silk hydrogels.

Control of silk fibroin concentration in aqueous solutions via osmotic stress was studied to assess relationships to gel formation and structural, morphological, and functional (mechanical) changes associated with this process. Environmental factors potentially important in the in vivo processing of aqueous silk fibroin were also studied to determine their contributions to this process. Gelation of silk fibroin aqueous solutions was affected by temperature, Ca(2+), pH, and poly(ethylene oxide) (PEO). Gelation time decreased with increase in protein concentration, decrease in pH, increase in temperature, addition of Ca(2+), and addition of PEO. No change of gelation time was observed with the addition of K(+). Upon gelation, a random coil structure of the silk fibroin was transformed into a beta-sheet structure. Hydrogels with fibroin concentrations >4 wt % exhibited network and spongelike structures on the basis of scanning electron microscopy. Pore sizes of the freeze-dried hydrogels were smaller as the silk fibroin concentration or gelation temperature was increased. Freeze-dried hydrogels formed in the presence of Ca(2+) exhibited larger pores as the concentration of this ion was increased. Mechanical compressive strength and modulus of the hydrogels increased with increase in protein concentration and gelation temperature. The results of these studies provide insight into the sol-gel transitions that silk fibroin undergoes in glands during aqueous processing while also providing important insight in the in vitro processing of these proteins into useful new materials.

Hydrogel, Polyethylene Glycol Dimethacrylate↗