Biomedical subjects

Hyun Joon Kong

Publications and source records attributed to Hyun Joon Kong.

9 recordsLinked to original sources

PubMed2007

Nanoscale cell adhesion ligand presentation regulates nonviral gene delivery and expression.

It is hypothesized that the nanoscale organization of cell adhesion ligands in a synthetic ECM regulates nonviral gene delivery. This hypothesis was examined with pre-osteoblasts cultured on substrates which present varied density and spacing of synthetic adhesion ligands. The levels of gene transfer and expression were increased with the density of adhesion ligands, but decreased with the spacing of ligands, due to changes in the cell growth rate. This study provides a material-based control point on the nanometer scale for nonviral gene based therapies.

Cell Adhesion↗

PubMed2006

Quantifying the relation between adhesion ligand-receptor bond formation and cell phenotype.

One of the fundamental interactions in cell biology is the binding of cell receptors to adhesion ligands, and many aspects of cell behavior are believed to be regulated by the number of these bonds that form. Unfortunately, a lack of methods to quantify bond formation, especially for cells in 3D cultures or tissues, has precluded direct probing of this assumption. We now demonstrate that a FRET technique can be used to quantify the number of bonds formed between cellular receptors and synthetic adhesion oligopeptides coupled to an artificial extracellular matrix. Similar quantitative relations were found between bond number and the proliferation and differentiation of MC3T3-E1 preosteoblasts and C2C12 myoblasts, although the relation was distinct for each cell type. This approach to understanding 3D cell-extracellular matrix interactions will allow one to both predict cell behavior and to use bond number as a fundamental design criteria for synthetic extracellular matrices.

Animals↗

PubMed2006

Alginate hydrogels as biomaterials.

[Image: see text] Alginate hydrogels are proving to have a wide applicability as biomaterials. They have been used as scaffolds for tissue engineering, as delivery vehicles for drugs, and as model extracellular matrices for basic biological studies. These applications require tight control of a number of material properties including mechanical stiffness, swelling, degradation, cell attachment, and binding or release of bioactive molecules. Control over these properties can be achieved by chemical or physical modifications of the polysaccharide itself or the gels formed from alginate. The utility of these modified alginate gels as biomaterials has been demonstrated in a number of in vitro and in vivo studies.Micro-CT images of bone-like constructs that result from transplantation of osteoblasts on gels that degrade over a time frame of several months leading to improved bone formation.

Alginates↗

PubMed2005

Non-viral gene delivery regulated by stiffness of cell adhesion substrates.

Non-viral gene vectors are commonly used for gene therapy owing to safety concerns with viral vectors. However, non-viral vectors are plagued by low levels of gene transfection and cellular expression. Current efforts to improve the efficiency of non-viral gene delivery are focused on manipulations of the delivery vector, whereas the influence of the cellular environment in DNA uptake is often ignored. The mechanical properties (for example, rigidity) of the substrate to which a cell adheres have been found to mediate many aspects of cell function including proliferation, migration and differentiation, and this suggests that the mechanics of the adhesion substrate may regulate a cell's ability to uptake exogeneous signalling molecules. In this report, we present a critical role for the rigidity of the cell adhesion substrate on the level of gene transfer and expression. The mechanism relates to material control over cell proliferation, and was investigated using a fluorescent resonance energy transfer (FRET) technique. This study provides a new material-based control point for non-viral gene therapy.

3T3 Cells↗

PubMed2005

FRET measurements of cell-traction forces and nano-scale clustering of adhesion ligands varied by substrate stiffness.

The mechanical properties of cell adhesion substrates regulate cell phenotype, but the mechanism of this relation is currently unclear. It may involve the magnitude of traction force applied by the cell, and/or the ability of the cells to rearrange the cell adhesion molecules presented from the material. In this study, we describe a FRET technique that can be used to evaluate the mechanics of cell-material interactions at the molecular level and simultaneously quantify the cell-based nanoscale rearrangement of the material itself. We found that these events depended on the mechanical rigidity of the adhesion substrate. Furthermore, both the proliferation and differentiation of preosteoblasts (MC3T3-E1) correlated to the magnitude of force that cells generate to cluster the cell adhesion ligands, but not the extent of ligand clustering. Together, these data demonstrate the utility of FRET in analyzing cell-material interactions, and suggest that regulation of phenotype with substrate stiffness is related to alterations in cellular traction forces.

3T3 Cells↗

PubMed2004

Tracheal reconstruction using tissue-engineered cartilage.

OBJECTIVES: To determine whether rabbit cartilage can be tissue engineered using a polyglycolic acid (PGA) construct composed of PGA mesh, autologous chondrocytes, and alginate covalently linked with the cell adhesion sequence arginine-glycine-aspartic acid (RGD), and to investigate the feasibility of reconstructing tracheal defects using the PGA construct in conjunction with a bioabsorbable intratracheal stent. METHODS: Nineteen New Zealand White rabbits were used. Nine rabbits underwent subcutaneous implantation of 3 different PGA construct combinations: (1) PGA, autologous chondrocytes, and RGD-modified alginate; (2) PGA, autologous chondrocytes, and unmodified alginate; and (3) PGA and RGD-modified alginate. The remaining 10 animals underwent anterior tracheal reconstruction using fascia lata grafts and the complete PGA construct (PGA, autologous chondrocytes, and RGD-modified alginate). At the time of tracheal reconstruction, a poly-l-lactic acid intratracheal stent was placed in 5 of these latter animals. Rates of tracheal stenosis and mortality were compared with those of historical control animals. Histologic analysis was performed on the PGA constructs. RESULTS: In the subcutaneous implants, the PGA constructs made with chondrocytes (with and without RGD) demonstrated mature cartilage formation in 7 (78%) of the 9 animals. No cartilage was seen in PGA constructs made without chondrocytes. Two of the 10 animals that underwent tracheal reconstruction with the complete PGA construct survived to 20 weeks and demonstrated patent airways, 1 with a stent and 1 without a stent (80% overall mortality). Histologic analysis showed mature cartilage formation at the tracheal reconstruction site. Historical control animals that underwent reconstruction with fascia lata alone demonstrated the lowest overall mortality. CONCLUSIONS: Cartilage can be tissue engineered in rabbits using PGA mesh embedded with alginate-encapsulated autologous chondrocytes. It is also possible to reconstruct tracheal defects with this method of cartilage engineering, although the mortality rate in this study is high.

Alginates↗

PubMed2003

Designing alginate hydrogels to maintain viability of immobilized cells.

Hydrogel-forming materials have been widely utilized as an immobilization matrix and transport vehicle for cells. Success in these applications is dependent upon maintaining cell viability through the gel preparation process. We hypothesized that the high viscosity of pre-gelled solutions typically used in these applications may decrease cell viability due to the high shear forces required to mix cells with these solutions. Further, we proposed this harmful effect could be mediated by decreasing the molecular weight (Mw) of the polymer used to form the gel, while maintaining its gel-forming ability. To investigate this hypothesis, alginate was used as model system, as this copolymer consists of cross-linkable guluronic acid (G) blocks and non-cross-linkable blocks. Decreasing the Mw of alginate using irradiation (e.g., irradiating at dose of 2 Mrad) decreased the low shear viscosity of 2% (w/w) pre-gelled solutions from 1000 to 4 cP, while maintaining high elastic moduli, once cross-linked to form a gel. Importantly, the immobilization of cells with these polymer hydrogels increased cell viability from 40% to 70%, as compared to using high Mw polymer chains to form the gels. Furthermore, the solids concentration of gels formed with the low Mw alginate could be raised to further increase the moduli of gels without significantly deteriorating the viability of immobilized cells. This was likely due to the limited increase in the viscosity of these solutions. This material design approach may be useful with a variety of synthetic or naturally occurring block copolymers used to immobilize cells.

Alginates↗

PubMed2003

The effects of poly(ethyleneimine) (PEI) molecular weight on reinforcement of alginate hydrogels.

Alginate hydrogels are widely used for cell encapsulation and transplantation, and they are frequently surface reinforced with secondary polymers to enhance their mechanical rigidity and stability. We hypothesized that the molecular weight (MW) of the polymer utilized to reinforce alginate would be an important factor in their stability, particularly when the gel network was homogeneously reinforced with the polymer. This hypothesis was investigated with alginate hydrogels cross-linked with Ca2+, and reinforced throughout the bulk of the gel with poly(ethyleneimine) (PEI) having different MWs. Interactions between the two polymers became significant following gelation, leading to higher elastic moduli (E) than gels with no PEI. The decrease in E of gels incubated in isotonic salt solutions over time, utilized as an indication of gel break down, was ameliorated with an increase in the MW of the PEI. In addition, the dependencies of the moduli and viscoelasticity on the temperature also became smaller with the use of high MW PEI. This is likely due to the limited mobility of high MW PEI, leading to a higher energy for dissociation. The stable interactions between the alginate and PEI prevented alterations of the pore structure in the gels, and slowed the deterioration of gel properties even under continuous agitation in a bioreactor. The results of this study will likely be useful in designing alginate encapsulation strategies for various applications.

Alginates↗

PubMedDate not supplied

Controlling rigidity and degradation of alginate hydrogels via molecular weight distribution.

The mechanical rigidity and degradation rate of hydrogels utilized as cell transplantation vehicles have been regarded as critical factors in new tissue formation. However, conventional approaches to accelerate the degradation rate of gels deteriorate their function as a mechanical support in parallel. We hypothesized that adjusting the molecular weight distribution of polymers that are hydrolytically labile but capable of forming gels would allow one to alter the degradation rate of the gels over a broad range, while limiting the range of their elastic moduli (E). We investigated this hypothesis with binary alginate hydrogels formed from both ionically and covalently cross-linked partially oxidized (1% uronic acid residues), low [molecular weight (MW) approximately 60,000 g/mol] and high MW alginates (MW approximately 120,000 g/mol) in order to examine the utility of this approach with various cross-linking strategies. Increasing the fraction of low MW alginates to 0.50 maintained a value of E similar to that for the high MW alginate gels but led to faster degradation, irrespective of the cross-linking mode. This result was attributed to a faster separation between cross-linked domains upon chain breakages for the low MW alginates, coupled with their faster chain scission than the high MW alginates. The more rapidly degrading oxidized binary hydrogels facilitated the formation of new bone tissues from transplanted bone marrow stromal cells, as compared with the nonoxidized high MW hydrogels. The results of these studies will be useful for controlling the physical properties of a broad array of hydrogel-forming polymers.

Alginates↗