Biomedical subjects

I A Abrikosov

Publications and source records attributed to I A Abrikosov.

11 recordsLinked to original sources

PubMed2005

Beating the miscibility barrier between iron group elements and magnesium by high-pressure alloying.

Iron and magnesium are almost immiscible at ambient pressure. The low solubility of Mg in Fe is due to a very large size mismatch between the alloy components. However, the compressibility of Mg is much higher than that of Fe, and therefore the difference in atomic sizes between elements decreases dramatically with pressure. Based on the predictions of ab initio calculations, we demonstrate in a series of experiments in a multianvil apparatus and in electrically and laser-heated diamond anvil cells that high pressure promotes solubility of magnesium in iron. At the megabar pressure range, more than 10 at. % of Mg can dissolve in Fe and then the alloy can be quenched to ambient conditions. A generality of the concept of high-pressure alloying between immiscible elements is demonstrated by its application to two other Fe group elements, Co and Ni.

Journal Article↗

PubMed2005

Vanishing magnetic interactions in ferromagnetic thin films.

We have used element-specific hysteresis measurements, based on the x-ray magnetic circular dichroism technique, to investigate magnetic trilayer structures composed of Fe and Ni layers. Within a critical regime we have discovered a class of structures in which the exchange interaction, the mechanism responsible for the macroscopic magnetism, can become vanishingly small. The experimental observations are supported by first principles theory and are explained as arising from a cancellation of several competing magnetic interactions. Hence, we have discovered a system with a novel exchange interaction between magnetic layers in direct contact that replaces the conventional exchange interaction in ferromagnets.

Journal Article↗

PubMed2004

Auger energy shifts in fcc AgPd random alloys from complete screening picture and experiment.

We extend the complete screening picture to ab initio calculations of Auger kinetic energy and Auger parameter shifts in metallic alloys. Experimental measurements of the L(3)M(4,5)M(4,5) Auger transition in fcc AgPd random alloys are compared with first-principles calculations and the results are in excellent agreement for both the Ag and Pd Auger shifts over the whole concentration range. We discuss the Auger kinetic energy shifts in terms of single-hole states for the 2p(3/2) core level and double-hole states for the 3d(5/2) level.

Journal Article↗

PubMed2004

On the sharpness of the interfaces in metallic multilayers.

We show that the three most relevant magnetic properties (magnetic moment, critical temperature, and interlayer exchange coupling) of metallic multilayers can be reproduced with good accuracy by first principles theory, provided that the picture of atomically sharp interfaces is abandoned and one allows instead for both interface alloying and interface roughness. The interface of a metallic multilayer (exemplified by the Fe/V system) is demonstrated to, at best, have interdiffusion essentially over two to three atomic layers on each side of the interface. Our conclusions are the result of combining experimental work with theoretical modeling, and we argue that this approach is the best avenue to obtain accurate information about the interface quality of metallic multilayers.

Journal Article↗

PubMed2003

Iron-silica interaction at extreme conditions and the electrically conducting layer at the base of Earth's mantle.

The boundary between the Earth's metallic core and its silicate mantle is characterized by strong lateral heterogeneity and sharp changes in density, seismic wave velocities, electrical conductivity and chemical composition. To investigate the composition and properties of the lowermost mantle, an understanding of the chemical reactions that take place between liquid iron and the complex Mg-Fe-Si-Al-oxides of the Earth's lower mantle is first required. Here we present a study of the interaction between iron and silica (SiO2) in electrically and laser-heated diamond anvil cells. In a multianvil apparatus at pressures up to 140 GPa and temperatures over 3,800 K we simulate conditions down to the core-mantle boundary. At high temperature and pressures below 40 GPa, iron and silica react to form iron oxide and an iron-silicon alloy, with up to 5 wt% silicon. At pressures of 85-140 GPa, however, iron and SiO2 do not react and iron-silicon alloys dissociate into almost pure iron and a CsCl-structured (B2) FeSi compound. Our experiments suggest that a metallic silicon-rich B2 phase, produced at the core-mantle boundary (owing to reactions between iron and silicate), could accumulate at the boundary between the mantle and core and explain the anomalously high electrical conductivity of this region.

Journal Article↗

PubMed2003

Antisite-defect-induced surface segregation in ordered NiPt alloy.

By means of first principles simulations we demonstrate that tiny deviations from stoichiometry in the bulk composition of the NiPt-L1(0) ordered alloy have a great impact on the atomic configuration of the (111) surface. We predict that at T=600 K the (111) surface of the Ni51Pt49 and Ni50Pt50 alloys corresponds to the (111) truncation of the bulk L1(0) ordered structure. However, the (111) surface of the nickel deficient Ni49Pt51 alloy is strongly enriched by Pt and should exhibit the pattern of the 2x2 structure. Such a drastic change in the segregation behavior is due to the presence of different antisite defects in the Ni- and Pt-rich alloys and is a manifestation of the so-called off-stoichiometric effect.

Journal Article↗

PubMed2002

Quantum origin of the oxygen storage capability of ceria.

The microscopic mechanism behind the extraordinary ability of ceria to store, release, and transport oxygen is explained on the basis of first-principles quantum mechanical simulations. The oxygen-vacancy formation energy in ceria is calculated for different local environments. The reversible CeO2-Ce2O3 reduction transition associated with oxygen-vacancy formation and migration is shown to be directly coupled with the quantum process of electron localization.

Journal Article↗

PubMed2002

Defect-induced magnetic structure in (Ga(1)-(x)Mn(x))As.

We show that magnetic structures involving partial disorder of local magnetic moments on the Mn atoms in (Ga(1)-(x)Mn(x))As lower the total energy, compared to the case of perfect ferromagnetic ordering, when As defects on the Ga sublattice are present. Such magnetic structures are found to be stable for a range of concentrations of As antisites, and this result accounts for the observed magnetic moments and critical temperatures in (Ga(1)-(x)Mn(x))As. We propose an explanation for the stabilization of the partially disordered magnetic structures and conclude that the magnetization and critical temperatures should increase substantially by reducing the number of As antisite defects.

Journal Article↗

PubMed2001

Valence-band hybridization and core level shifts in random Ag-Pd alloys.

First-principles calculations of the core-level binding energy shifts (CLS) for 3d inner-core electrons of Ag and Pd in fcc Ag-Pd alloy were carried out within the complete screening picture, which includes both initial and final state effects. These alloys show remarkable CLS that have the same sign for both alloy components, in contradiction to what would be expected from the potential model for core electron energies. We show that the main contribution to the core-level shift is due to the intra-atomic charge redistribution, which is related to the hybridization between the valence electron states of the alloy components. There is also a large contribution to the CLS from the core-hole relaxation energy.

Journal Article↗

PubMed2001

Anisotropic lattice distortions in random alloys from first-principles theory.

Within the framework of the exact muffin-tin orbitals (EMTO) theory we have developed a new method to calculate the total energy for random substitutional alloys. The problem of disorder is treated within the coherent potential approximation (CPA), and the total energy is obtained using the full charge density (FCD) technique. The FCD-EMTO-CPA method is suitable for determination of energy changes due to anisotropic lattice distortions in random alloys. In particular, we calculate the elastic constants of the Cu-rich face centered cubic Cu-Zn alloys ( alpha-brass) and optimize the c/a ratio for the hexagonal Zn-rich alloys for both the epsilon and eta phases.

Journal Article↗

PubMed2001

Pressure-induced Invar effect in Fe-Ni alloys.

We have measured the pressure-volume (P-V) relations for cubic iron-nickel alloys for three different compositions: Fe 0.64Ni (0.36), Fe 0.55Ni (0.45), and Fe 0.20Ni (0.80). It is observed that for a certain pressure range the bulk modulus does not change or can even decrease to some minimum value, after which it begins to increase under still higher pressure. In our experiment, we observe for the first time a new effect, namely, that the Fe-Ni alloys with high Ni concentrations, which show positive thermal expansion at ambient pressure, become Invar system upon compression over a certain pressure range.

Journal Article↗