PubMed Health⌕ Search

Biomedical subjects

I B Mandell

Publications and source records attributed to I B Mandell.

12 recordsLinked to original sources
PubMed2006

Association of a single nucleotide polymorphism in the calpastatin gene with carcass and meat quality traits of beef cattle.

Calpastatin (CAST) is a naturally occurring protein that inhibits the normal tenderization of meat as it ages postmortem. A SNP was identified in the CAST gene (a G to C substitution) and genotyped on crossbred commercially fed heifers (n = 163), steers (n = 226), and bulls (n = 61) from beef feedlots, and steers (n = 178) from a University of Guelph feeding trial. The association of the CAST SNP with carcass and meat quality traits was studied. Carcass traits included fat, lean, and bone yield; grade fat; LM area; and HCW. Meat quality traits included marbling grade; i.m. fat content of LM; tenderness evaluation of LM (Warner-Bratzler shear force) at 2, 7, 14, and 21 d of postmortem aging; and tenderness evaluation of semitendinosus muscle at 7 d of postmortem aging. The mixed model used in the analyses included fixed effects of CAST genotype, sex, slaughter group, and breed composition (linear covariate); sire was a random effect. For the analysis of shear force, i.m. fat content of LM was also included in the model as a linear covariate. Shear force measures were analyzed within days of postmortem aging and by repeated measures analysis. The CAST SNP allele C was more frequent (63%) in the crossbred population than allele G. The CAST SNP was associated with shear force across days of postmortem aging (P = 0.005); genotype CC yielded beef that was more tender than GG (-0.32 kg +/- 0.13), and CG had intermediate tenderness. The corresponding average allele substitution effect (G to C substitution) was also highly significant (-0.15 +/- 0.05 kg, P = 0.002). A lower percentage of unacceptably tough steaks (shear force > 5.7 kg) at 2 and 7 d postmortem was associated with an increasing number of C alleles (P < or = 0.05). At 7 d postmortem, the percentage of unacceptably tough steaks decreased by 24 and 35%, respectively, for animals carrying 1 and 2 copies of the C allele relative to animals with no C alleles. However, genotype CC had a greater fat yield (+1.44 +/- 0.56%; P = 0.037) than genotype GG, with a corresponding allele substitution effect of 0.67 +/- 0.27% (P = 0.015). Therefore, the CAST SNP allele C was associated with increased LM tenderness across days of postmortem aging and, importantly for the beef industry, had a significant reduction in the percentage of steaks rated unacceptably tough by consumers based on an assumed threshold level.

Animals↗
PubMed2006

Genetic correlations between live yearling bull and steer carcass traits adjusted to different slaughter end points. 1. Carcass lean percentage.

We studied genetic relationships between age-constant live yearling beef bull growth and ultrasound traits and steer carcass traits with dissected steer carcass lean percentage adjusted to slaughter age-, HCW-, fat depth-, and marbling score-constant end points. Three measures of steer carcass lean percentage were used. Blue Tag lean percentage (BTLean) was predicted from HCW, fat depth, and LM area measurements. Ruler lean percentage (RulerLean) was predicted from carcass fat depth and LM depth and width measurements. Dissected lean percentage (DissLean) was based on dissection of the 10-11-12th rib section. Both BTLean (h2 = 0.30 to 0.44) and DissLean (h2 = 0.34 to 0.39) were more heritable than RulerLean (h2 = 0.05 to 0.14) at all end points. Genetic correlations among DissLean and RulerLean (rg = 0.61 to 0.70), DissLean and BTLean (rg = 0.56 to 0.72), and BTLean and RulerLean (rg = 0.59 to 0.90) indicated that these traits were not genetically identical. Adjusting Diss-Lean to different end points changed the magnitude, but generally not the direction, of genetic correlations with indicator traits. Ultrasound scan-age-constant live yearling bull lean percentage estimates were heritable (h2 = 0.26 to 0.42) and genetically correlated with each other (rg = 0.68 to 0.99) but had greater correlations with DissLean at slaughter age (rg = 0.24 to 0.48) and HCW (rg = 0.16 to 0.40) end points than at fat depth (rg = -0.08 to 0.13) and marbling score (rg = 0.02 to 0.11) end points. Scan-age-constant yearling bull ultrasound fat depth also had stronger correlations with DissLean at slaughter age (rg = -0.34) and HCW (rg = -0.25) than at fat depth (rg = -0.02) and marbling score (rg = -0.03) end points. Yearling bull scan-age-constant ultrasound LM area was positively correlated with DissLean at all endpoints (rg = 0.11 to 0.23). Genetic correlations between yearling bull LM method 1 width (rg = 0.38 to 0.56) and method 2 depth (rg = -0.17 to -0.38) measurements with DissLean suggested that LM shape may be a valuable addition to genetic improvement programs for carcass lean percentage at slaughter age, HCW, and fat depth constant end points. At all end points, steer carcass fat depth (rg = -0.60 to -0.64) and LM area (rg = 0.48 to 0.59) had stronger associations with DissLean than did corresponding live yearling bull measurements. Improved methods that combine live ultrasound and carcass traits would be beneficial for evaluating carcass lean percentage at fat depth or marbling score end points.

Adipose Tissue↗
PubMed2006

Genetic correlations between live yearling bull and steer carcass traits adjusted to different slaughter end points. 2. Carcass fat partitioning.

Partial carcass dissection data from 1,031 finished crossbred beef steers were used to calculate heritabilities and genetic correlations among subcutaneous, intermuscular, and body cavity fat percentage and marbling score adjusted to slaughter age-, HCW-, fat depth-, and marbling score-constant endpoints. Genetic correlations were also calculated among these fat partitions with live growth and ultrasound traits evaluated in yearling beef bulls (n = 2,172) and steer carcass measurements. Heritabilities of the different fat partitions ranged from 0.22 (marbling score-constant body cavity fat) to 0.46 (HCW-constant marbling score). Genetic correlations between subcutaneous fat and intermuscular fat (rg = 0.16 to 0.32) and between intermuscular fat and body cavity fat (rg = 0.38 to 0.50) were more highly associated than subcutaneous fat and body cavity fat (rg = -0.08 to 0.05), indicating that fat depots are not under identical genetic control. Adjusting fat depots to different end points affected the magnitude but usually not the sign of the genetic correlations. Bull postweaning gain was associated with intermuscular (-0.24 to -0.35), body cavity (-0.24 to -0.29), and marbling fat (-0.24 to -0.39) in steers. Bull hip height was associated with body cavity (-0.20 to -0.29) and marbling fat (-0.20 to -0.47) in steers. Bull ultrasound fat depth was associated with subcutaneous (0.11 to 0.29), intermuscular (0.05 to 0.36), body cavity (0.27 to 0.49), and marbling fat (0.27 to 0.73) in steers. Bull ultrasound intramuscular fat percentage was associated with subcutaneous (-0.22 to -0.44) and intermuscular fat (-0.06 to 0.31) in steers. Bull ultrasound LM area was associated with body cavity (-0.25 to -0.31) and marbling fat (-0.25 to -0.30) in steers. Ultrasound LM width measurements were negatively correlated with subcutaneous fat (rg = -0.09 to -0.18), intermuscular fat (rg = -0.53 to -0.61), body cavity fat (rg = -0.63 to -0.69), and marbling score (rg = -0.75 to -0.87) at slaughter age-, HCW-, and fat depth-constant endpoints; correlations were generally lower at a marbling score-constant end point (rg = 0.07 to -0.49). Ultrasound indicator traits measured in seedstock may be useful in altering fat partitioning in commercial beef carcasses.

Adipose Tissue↗
PubMed2005

Association of single nucleotide polymorphisms in the leptin gene with carcass and meat quality traits of beef cattle.

Studies with different populations are required to properly characterize the robustness of associations of polymorphisms in candidate genes with economically important traits across beef cattle populations before this sort of genetic information can be used efficiently in breeding and management decisions. The objective of this study was to evaluate the association of previously reported SNP in the bovine leptin gene with carcass and meat quality traits from a large sample of crossbred beef cattle. Five SNP (UASMS1, UASMS2, UASMS3, E2JW, and E2FB) were genotyped on 1,111 crossbred bulls, heifers, and steers. The measured traits included fat, lean, and bone yield (%) by partial rib dissection, grade fat, LM area, HCW, quality grade, LM i.m. fat, and tenderness evaluation of LM and semitendinosus muscle. Only four SNP were analyzed (UASMS1, UASMS2, E2JW, and E2FB), because UASMS1 and UASMS3 were completely linked. A uni-variate mixed-inheritance animal model was used to evaluate the association of either genotypes or haplo-types with the traits. The two leptin exon 2 SNP were associated with fat and lean yield and grade fat (E2JW, P < 0.01; E2FB, P < 0.05), and they interacted in their effect on LM tenderness (P < 0.01). The leptin promoter SNP were either not associated with any of the traits (UASMS2) or with fat yield only (UASMS1). Three haplotypes (TCAC, CCAT, TTAC) were at high frequency in the population (88%) and had similar effects on all the traits. Compared with the common haplotypes, one haplotype (CCTT) showed a significantly different effect on fat and lean yield and grade fat (P < 0.01), and one haplotype (TTTT) had a different effect on LM tenderness (P < 0.03). Therefore, important associations between SNP within the leptin gene with lean yield, fatness (fat yield and subcutaneous fat), and tenderness were detected. Results confirm some of the previously reported associations, but diverge with respect to others, showing that further efforts are required to validate some prospective associations.

Adipose Tissue↗
PubMed2001

Breed effects on growth performance, carcass characteristics, fatty acid composition, and palatability attributes in finishing steers.

Crossbred steers (n = 136) were used to assess breed differences in growth performance, carcass characteristics, fatty acid composition (total lipids and phospholipids), and palatability attributes of longissimus muscle. A multiple regression model was applied to crossbreeding data to estimate genetic differences between Simmental and Red Angus at the same level of backfat finish (10 mm). Simmental spent 71 more (P < 0.001) days on feed to acquire the same degree of backfat thickness as Red Angus, had heavier (P < 0.001) slaughter weights, larger (P = 0.002) longissimus muscle area, and increased (P = 0.023) lean yield. Average daily gain did not differ (P = 0.297) between breeds. Simmental were less (P = 0.012) efficient in converting feed to gain than Red Angus. Generally, there were few breed differences in palatability attributes for longissimus and semitendinosus muscles, with the exception of increased (P < 0.05) beef flavor scores for Simmental beef vs Red Angus beef across both muscles. For total lipids, concentrations of myristoleic acid (14:1), palmitoleic acid (16:1), and vaccenic acid (18:1n-7), along with n-6 to n-3 fatty acid (n-6:n-3) ratio, were greater (P < 0.05) in Simmental than Red Angus. In contrast, concentrations of margaric acid (17:0), eicosapentaenoic acid (20:5n-3), and total n-3 polyunsaturated fatty acids (n-3 PUFA) were greater (P < 0.05) in Red Angus than Simmental. For phospholipids, Simmental had lower (P < 0.05) amounts of 20:5n-3, docosahexaenoic acid (22:6n-3), and n-3 PUFA, with a greater (P = 0.017) n-6:n-3 ratio. Activity of delta9-desaturase enzyme in the conversion of palmitic acid (16:0) to 16:1 was greater (P = 0.001) in total lipids from Simmental as compared with Red Angus. A genetic basis for fatty acid differences is suggested, although the biological and practical significance needs to be demonstrated.

Animals↗
PubMed2000

Technical note: covariance adjustment in beef cattle research.

In randomized experiments, analysis of covariance is used to increase precision of treatment comparisons. However, for factors that are observational (e.g., breed) or for covariates measured after treatments are applied, it may not be biologically meaningful to calculate treatment means adjusted to a common value of the covariate. For example, in beef cattle trials, it may not be meaningful to compare hot carcass weights of medium- and large-framed breeds adjusted to a common weaning weight because the breeds have naturally different mean weights at weaning. If done, this would typically result in an undesirable downward adjustment of mean carcass weight for the large-framed breed and upward adjustment of the mean carcass weight for the small-framed breed. However, it is desirable to evaluate the mean carcass weight for two diets, adjusted to a common weaning weight. Because of randomization, the expected weaning weights of animals on the two diets are equal and hence the only effect of covariance adjustment is to increase precision of the diet comparison. This paper presents the statistical methodology for estimating covariance adjusted means (termed partially adjusted means) when the levels of some of the factors are compared at a common value of the covariate but the levels of other factors are compared at differing values of the covariate. The methodology is extended to include several covariates, several factors, and arbitrary interactions among covariates, among factors, and between factors and covariates. These methods can be implemented using existing statistical software for linear models. Data are presented from an experiment in which hot carcass weight was recorded for beef cattle. Analyses of these data illustrate that adjusted means, partially adjusted means, and unadjusted means may differ substantially in magnitude, significance, and in the ranking of treatments.

Analysis of Variance↗
PubMed1998

Effects of forage vs grain feeding on carcass characteristics, fatty acid composition, and beef quality in Limousin-cross steers when time on feed is controlled.

Limousin-cross steers (n=135; 258+/-26 kg) were used to compare forage vs grain feeding on carcass composition and palatability attributes of beef when time on feed was controlled. Diets included a 95% alfalfa silage ration (AS) or a 68% high-moisture corn, 25% alfalfa silage ration (HMC). These were incorporated into six treatments to allow comparisons of end points based on similar days on feed or backfat finish. Dietary treatments included 1) HMC (4 mm), or cattle allowed ad libitum intake of HMC until slaughter at 4 mm ultrasound backfat; 2) AS (HMC-4), or cattle allowed ad libitum intake of AS until slaughter, regardless of finish, when HMC (4 mm) cattle were slaughtered; 3) AS (4 mm), or cattle allowed ad libitum intake of AS until slaughter at 4 mm backfat; 4) HMC (AS-4), or cattle allowed ad libitum intake of HMC until slaughter, regardless of finish, when AS (4 mm) cattle achieved 4 mm backfat; 5) HMC (RES), or cattle fed HMC at restricted intakes until slaughter at 4 mm backfat with feed offered at 75% of intake achieved by HMC (4 mm) and HMC (AS-4) cattle; and 6) AS (8 mm) or cattle allowed ad libitum intake of AS ration until slaughter at 8 mm backfat. Grain feeding generally increased (P < .01) ADG, carcass weight, grade fat, and intramuscular fat content when compared with forage feeding at similar times on feed. Palatability attributes of ribeye roasts and ground beef were generally unaffected (P > .10) by diet with the exception of slightly less beef flavor and more off-flavor in forage-fed vs grain-fed beef. Higher (P < .01) concentrations of linolenic acid and lower (P < .10) concentrations of oleic acid in forage-fed beef may be partially responsible for diet differences in flavor.

Adipose Tissue↗
PubMed1997

Effects of fish meal in beef cattle diets on growth performance, carcass characteristics, and fatty acid composition of longissimus muscle.

We investigated the effects of fish meal (FM) in beef cattle diets on growth performance, carcass characteristics, and fatty acid (FA) composition of longissimus muscle in 63 yearling steers (335 +/- 23 kg). High-moisture corn and alfalfa silage diets were supplemented with either a corn gluten/blood meal mixture or FM at 10% of the diet. Fish meal contained (as-is basis) 5.87 g/kg eicosapentaenoic acid (EPA) and 9.84 g/kg docosahexaenoic acid (DHA). Seven strategies were developed to feed either a control diet (no FM) or diets containing 5 or 10% FM with FM fed for either 56, 112, or 168 d before slaughter. Average daily gain and feed efficiency were not affected (P > .10) by FM feeding but DMI decreased. Within FM diets, cattle fed 5% FM consumed more (P < .01) DM and gained more (P < .02) than cattle fed 10% FM. Carcass traits were not affected (P > .05) by feeding strategy except for fatter (P < .05) and lower (P < .06) yielding carcasses in cattle fed 5 vs 10% FM diets. Fish meal feeding increased (P < .01) concentrations of (n-3) FA, including EPA and DHA, and decreased (P < .05) concentrations of arachidonic acid. Increasing the amount of dietary FM further increased (P < .01) concentrations of EPA and DHA and decreased (P < .05) concentrations of (n-6) FA. We estimate that a 114-g steak from cattle fed 10% FM would supply 35 to 90% of the current average daily intake of EPA and DHA in North America. The results indicate that FM may have a role in niche marketing of beef provided that eating quality is not compromised.

Animals↗
PubMed1995

The determination and correlation of reproductive parameters of performance-tested Hereford and Simmental bulls.

Purebred Hereford and Simmental bulls (n = 120), managed similarly to bulls in the Ontario Bull Evaluation Program, were evaluated for reproductive parameters. Four diets, equivalent except for the form of dietary fiber, were fed in a growth performance trial. Diet had no direct effect (P > 0.10) on any of the reproductive variables examined. Of the 117 bulls that had complete breeding soundness evaluations, 75% were classified as satisfactory potential breeders, 24% as questionable potential breeders and 1% as unsatisfactory potential breeders. The 2 breeds were significantly different (P < 0.05) for several end of test parameters. When controlling for age and weight differences, Herefords had a higher backfat thickness, smaller scrotal circumference, lower paired testicular weight and lower epididymal weight. Semen morphology and motility did not differ (P > 0.10) between the breeds. When examining simple correlations, scrotal circumference was highly correlated with paired testicular weight, moderately correlated with epididymal weight, daily sperm production and extragonadal sperm reserves, and negatively correlated with backfat thickness. Scrotal circumference was not related to backfat thickness when controlling for breed effects. The degree of germinal epithelium loss was moderately and negatively correlated with the percentage of spermatozoa with normal morphology and progressive motility, epididymal sperm reserves and epididymal weight, but was not correlated with scrotal circumference.

Journal Article↗
PubMed1992

Effects of source and level of dietary neutral detergent fiber on feed intake, ruminal fermentation, ruminal digestion in situ, and total tract digestion in beef cattle fed pelleted concentrates with or without supplemental roughage.

The effects of source and level of dietary NDF on intake, ruminal digestion in situ, ruminal fermentation, and total tract digestion were evaluated in Hereford steers using a replicated 5 x 5 Latin square design. Diets contained 62 to 64% TDN and included 1) 80% control concentrate (contained pelleted ground grains) and 20% timothy hay (traditional diet), 2) 80% control concentrate and 20% alfalfa cubes, 3) 90% control concentrate and 10% cubes, 4) a completely pelleted diet using corn cobs as the primary NDF source, and 5) 80% textured (rolled instead of ground grains) concentrate and 20% hay. Dry matter intake differed (P less than .05) between the traditional and cube diets due to limited acceptance of alfalfa cubes. Increased (P less than .05) ruminal osmolality, total VFA, and NH3 N and lower (P less than .01) ruminal pH in steers fed corn cob and cube diets relative to steers fed the traditional diet were due to preferential consumption of concentrate over supplemental roughage and the resultant rapid fermentation of concentrates. Potentially degradable DM in the traditional diet exceeded (P less than .06) all other diets, resulting in the increased (P less than .10) extent of DM disappearance despite a slower (P less than .05) rate of DM disappearance. Rate of NDF disappearance and all in situ starch disappearance parameters were similar between the traditional, corn cob, and cube diets. All ruminal digestion parameters involving NDF disappearance were similar between hay diets and between cube diets, whereas rate and extent of starch disappearance differed (P less than .05) between hay diets. Although formulation of diets with different sources of dietary NDF did not affect total tract digestion of nutrients, nutrient availability and ruminal fermentation were altered due to dietary differences in sources of dietary NDF and preferential selection of feedstuffs by steers.

Ammonia↗
PubMed1992

Effects of source of dietary neutral detergent fiber on chewing behavior in beef cattle fed pelleted concentrates with or without supplemental roughage.

Ten 394-kg, ruminally fistulated Hereford steers were used in a replicated 5 x 5 Latin square design to evaluate the effects of source and level of dietary NDF on chewing activities during eating and rumination. Diets contained 62 to 64% TDN and included 1) 80% pelleted concentrate (control; contained ground grains, fibrous byproducts, molasses, and protein, vitamin, and mineral supplements; 36% NDF, 16% CP) and 20% long timothy hay (67% NDF, 8% CP), 2) 80% control concentrate and 20% alfalfa cubes (56% NDF, 15% CP), 3) 90% control concentrate and 10% alfalfa cubes, 4) a completely pelleted diet using corn cobs as the primary NDF source (40% NDF, 17% CP), and 5) 80% textured (coarse instead of ground grains; 42% NDF, 15% CP) concentrate and 20% hay. Diets were formulated to be similar in NDF content, and dietary protein satisfied NRC recommendations. Chewing during eating did not differ (P greater than .10) between diets containing supplemental roughage but decreased (P less than .001) with the corn cob diet. Rumination chewing decreased (P less than .001) with the corn cob and cube diets. The number of chews per day during eating corrected for NDF intake/BW.75 decreased (P less than .05) in the corn cob diet. Rumination periods and duration increased and latency before rumination decreased in hay diets. Steers fed the corn cob diet tended to be more (P less than .10) consistent in time spent eating across 4-h intervals than steers fed the traditional diet. Replacement of long hay with the completely pelleted corn cob diet decreased rumination activity.

Animal Feed↗