PubMed Health⌕ Search

Biomedical subjects

I D Burdett

Publications and source records attributed to I D Burdett.

At least 19 recordsLinked to original sources
PubMed1990

Localization of two fibronectin-binding glycoproteins in rat liver and primary hepatocytes. Co-distribution in vitro of integrin (alpha 5 beta 1) and non-integrin (AGp110) receptors in cell-substratum adhesion sites.

We have compared the localization of integrin alpha 5 beta 1 and AGp110 (apical glycoprotein of Mr 110 x 10(3]] in rat liver parenchyma and in primary hepatocyte cultures. Integrin alpha 5 beta 1 is a heterodimeric fibronectin receptor. AGp110 is a newly described monomeric glycoprotein of the apical (bile canalicular) membrane domain of liver parenchyma that binds in an RGD-independent manner to fibronectin and mediates spreading of hepatocytes onto fibronectin-coated substrata. Using Western blotting of fractionated liver membranes and immunocytochemistry of liver sections at light- and electron-microscope levels, we have confirmed that AGp110 is a canalicular glycoprotein and have established that integrin is located in approximately equal proportions in the sinusoidal, lateral and canalicular membrane domains. In the canalicular surface domain both glycoproteins are associated with microvilli. Examination of immunolabelled primary hepatocytes spread on fibronectin-coated substrata by light and laser scanning confocal microscopy revealed colocalization of AGp110, integrin, actin and vinculin in substratum-attached microextensions at the periphery of the basal cell surface. Actin filaments that terminated at these cell processes originated from circular sub-cortical actin fibres. Interference reflection microscopy revealed focal adhesive contacts at the edge of the basal cell periphery at the same location where AGp110 and integrin were observed by immunofluorescence. In vitro, a proportion of the primary hepatocytes seeded onto fibronectin-coated substrata aggregated into colonies of several cells with intercellular contacts between neighbouring cells. Cell-substratum contacts containing integrin, AGp110, actin and vinculin followed the contours of these colonies in the same manner as they delineated the basal periphery of single, substratum-attached cells. We conclude that both integrin and AGp110 contribute to hepatocyte-fibronectin adhesive interactions and that intercellular adhesion and cooperation among hepatocytes in their response to fibronectin matrices leads to colony formation and morphological differentiation of parenchymal cell monolayers in vitro.

Actins↗
PubMed1988

Estimating the growth pattern of micro-organisms in distinct stages of the cell cycle.

Knowledge of the growth patterns of micro-organisms is required to understand how cell growth and division are controlled and co-ordinated in relation to mechanisms of wall assembly and chromosome duplication. Direct observation, e.g. by time-lapse studies, is usually limited in accuracy by the small size of the cells. Indirect methods have therefore been developed which give estimates of the growth patterns of cells, based on the analysis of distributions of cell size in populations in balanced exponential growth. Previously, we have compared such methods (Burdett & Kirkwood, 1983) and concluded that the most powerful approach is that proposed by Collins & Richmond (1962), in which growth rate is calculated as a function of cell size using size distributions of extant, separating and new-born cells. A limitation of this method has been, however, that it gives only an estimate for the average growth rate of cells at a given size, irrespective of the state of progress of individual cells through the cell cycle. In this paper, we describe an extension to the standard Collins-Richmond procedure which provides separate estimates for the growth pattern of cells in distinct stages of the cell cycle, and we illustrate the method in relation to growth of mononucleate, binucleate and septate cells of Bacillus subtilis. It is demonstrated that this three-stage analysis is clearly superior to the standard method, in that it provides more detailed and probably more realistic information. We also demonstrate how to assess the precision and accuracy of the estimated growth pattern. Generalization of the method to any number of stages and to multiple as well as binary fission is described.

Bacillus subtilis↗
PubMed1987

Structure and assembly of desmosome junctions: biosynthesis and turnover of the major desmosome components of Madin-Darby canine kidney cells in low calcium medium.

Neither stratifying (primary keratinocytes) nor simple (Madin-Darby canine kidney [MDCK] and Madin-Darby bovine kidney [MDBK]) epithelial cell types from desmosomes in low calcium medium (LCM; less than 0.1 mM), but they can be induced to do so by raising the calcium level to physiological concentrations (standard calcium medium [SCM], 2 mM). We have used polyclonal antisera to the major bovine epidermal desmosome components (greater than 100 kD) in a sensitive assay involving immunoprecipitation of the components from metabolically labeled MDCK cell monolayers to investigate the mechanism of calcium-induced desmosome formation. MDCK cells, whether cultured in LCM or SCM, were found to synthesize the desmosome protein, DPI and desmosome glycoproteins DGI and DGII/III with identical electrophoretic mobility, and also, where relevant, with similar carbohydrate addition/processing and proteolytic processing. The timings of these events and of transport of DGI to the cell surface were similar in low and high calcium. Although the rates of synthesis of the various desmosome components were also similar under both conditions, the glycoprotein turnover rates increased dramatically in cells cultured in LCM. The half-lives decreased by a factor of about 7 for DGI and 12 for DGII/III and, consistent with this, MDCK cells labeled for 48 h in SCM had three and six times the amount of DGI and DGII/III, respectively, as cells labeled for 48 h in LCM. The rate of turnover and the levels of DPI were changed in the same direction, but to much lesser extents. Possible mechanisms for the Ca2+-dependent control of desmosome formation are discussed in the light of this new evidence.

Animals↗
PubMed1986

Normal pole formation during total inhibition of wall synthesis of Bacillus subtilis.

Previous work has shown that the side wall of a Gram-positive rod is initially laid down as a compact layer inside the older wall. It is then stretched as it comes to bear tension due to the osmotic pressure inside the cell. If the polar wall is likewise capable of a degree of expansion, then no new murein need be added while the planar cross-wall splits and converts into two poles. In Bacillus subtilis mutant strain FJ6, which is deficient in autolytic enzymes, pole formation can be caused by addition of exogenous muramidase (10 micrograms hen egg white lysozyme ml-1 for 10 min at 35 degrees C). This strain grows as long filaments with many completed cross-walls, but enzymic treatment caused the formation of many new poles of normal morphology as judged by thin section electron microscopy. Fully separated poles of normal appearance were also found when more than 100 times the MIC (1 microgram ml-1) of vancomycin was added to block wall growth totally and rapidly 10 min before the addition of lysozyme. We conclude, therefore, that no new murein is needed in the conversion of the flat septum into poles and that the unstressed cross-wall is capable of the necessary expansion.

Bacillus subtilis↗
PubMed1986

Biophysics of pole formation of gram-positive rods.

During pole formation in Bacillus subtilis the inner and outer surfaces of the nascent pole are enlarged by almost exactly the same extent. This means that the stress is almost uniformly distributed throughout the polar wall. This differs from the situation in the cylindrical side wall, where most of the stress is exerted in the outer portions of the intact wall. Because the stress is shared more uniformly, the maximum strain in any part of the polar wall is reduced, compared with the maximum strain within the side wall. The lowered stress may account, in part, for the resistance of the polar wall to hydrolysis by autolytic enzymes under certain conditions. The shape of the newly completed pole is significantly different from the spherical shape that the hydrostatic pressure would tend to produce. It does, however, achieve the shape that maximizes the polar volume under the restrictions arising due to expansion along the circumference not being possible near the junction of cylindrical and polar wall.

Bacillus subtilis↗
PubMed1986

Growth kinetics of individual Bacillus subtilis cells and correlation with nucleoid extension.

The growth rate of individual cells of Bacillus subtilis (doubling time, 120 min) has been calculated by using a modification of the Collins-Richmond principle which allows the growth rate of mononucleate, binucleate, and septate cells to be calculated separately. The standard Collins-Richmond equation represents a weighted average of the growth rate calculated from these three major classes. Both approaches strongly suggest that the rate of length extension is exponential. By preparing critical-point-dried cells, in which major features of the cell such as nucleoids and cross-walls can be seen, it has also been possible to examine whether nucleoid extension is coupled to length extension. Growth rates for nucleoid movement are parallel to those of total length extension, except possibly in the case of septate cells. Furthermore, by calculating the growth rate of various portions of the cell surface, it appears likely that the limits of the site of cylindrical envelope assembly lie between the distal tips of the nucleoid; the old poles show zero growth rate. Coupling of nucleoid extension with increase of cell length is envisaged as occurring through an exponentially increasing number of DNA-surface attachment sites occupying most of the available surface.

Bacillus subtilis↗
PubMed1979

Electron microscope study of the rod-to-coccus shape change in a temperature-sensitive rod- mutant of Bacillus subtilis.

The changes in cell morphology of Bacillus subtilis rodB during a temperature shift from 20 to 42 degrees C, in the absence of added anions, are described. At 20 degrees C the organisms grow as rods but gradually become spherical in shape when placed at 42 degrees C. The shape change is initiated by an increase in diameter at the cell equator, resulting in a bulged morphology, which is further modified to the morphology of a coccus. This change may involve a modification of the pattern of normal cylindrical extension such that incorporation of newly synthesized wall leads only to increase in diameter, perhaps from a growth zone of limited extent. The pattern of surface growth was followed by reconstructing the sequence of cross wall formation and pole construction in rods grown at 20 degrees C and in organisms incubated at 42 degrees C for 75 and 150 min. In thin section, wall forming the septum and nascent poles can be distinguished from the surface distal to the division site by the presence of raised tears, perhaps analogous to the wall bands of streptococci. By using an analog rotation technique involving the three-dimensional reconstruction of cells by mathematical rotation of axial thin sections about their longitudinal axis, it is shown that the proportion of septal wall increases during the shape change. In the coccal forms, all surface growth may arise from septal growth sites.

Bacillus subtilis↗
PubMed1978

Negative staining of freeze-fractured envelopes of Escherichia coli K12.

Envelope fragments of E. coli K12 have been produced by freeze-fracturing "by hand" and negatively stained after thawing. The outer leaflet of the plasma membrane disintegrated upon thawing whereas the outer leaflet of the outer membrane did not. Negative staining revealed the following structural features on the outer membrane fragments: (i) "grooves" 4-6 nm wide, (ii) spherical particles 6-8 nm in diameter, (iii) "black dots" 3-8 nm in diameter. Treatment of cells with EDTA before freeze-fracturing caused dilation of grooves into holes eventually leading to fragmentation of the outer membrane. A mutant strain deficient in two outer membrane proteins fractured exclusively through the outer membrane. The outer leaflets so obtained disintegrated upon thawing similarly as observed for the outer leaflet of the plasma membrane.

Cell Membrane↗
PubMed1978

Signal to noise enhancement in a study of cell wall structure of Bacillus subtilis by interactive computation.

This paper describes a technique for obtaining values of the width and variation in optical density of sectioned bacterial cell walls by interactive computational methods. Background 'noise' prevents accurate determination of cell wall boundaries from the data in a single scan line but the noise may be suppressed by averaging several consecutive scan lines. although application of the technique is explained for sectioned bacterial cell walls, it is equally valid for similar situations where single line scans of electron micrographs are inadequate for precise determination of measurement.

Bacillus subtilis↗
PubMed1978

Study of pole assembly in Bacillus subtilis by computer reconstruction of septal growth zones seen in central, longitudinal thin sections of cells.

The septal growth of Bacillus subtilis 168/s has been studied by making a number of observations from thin sections of cells from exponentially growing cultures. The process was initiated by the formation of a new cross wall under a preexisting layer of cylindrical wall. An annular notch appeared to cut through the overlying wall and presumably allowed the cross wall to split into two layers of peripheral wall. During this initial notching process, two raised bands of wall material were produced which resembled those previously observed in morphological studies of Streptococcus faecalis. Through an improved fixation technique, it was possible to preserve the bands seen in B. subtilis to the extent that they were used as markers to study the subsequent stages of septal growth. These stages included (i) the continued displacement of the two bands from the cross wall (as the two nascent polar surfaces enlarged and as the diameter of the cross wall decreased), (ii) the closure of the cross wall, and (iii) the final severance of the common cross wall connection between two completed poles. To study this process in a more quantitative manner, three-dimensional reconstructions of the envelope observed between pairs of the raised bands were made from axial thin sections of cells. The process of reconstruction was based on a technique by which x, y coordinates were taken from thin sections and were rotated around the cell's central axis. These reconstructions were used to estimate the surface area or volume of the reconstructed zones or their parts. A round of septal growth was then simulated by arranging 118 reconstructions in order of increasing surface area or volume. The topology of the process was studied by noting how various measurements of septal thickness, length, surface area, and volume varied as a function of increasing septal zone size. This analysis was based on several assumptions, of which three of the most important are: (i) the bands produced by the initial notching process are markers which separate septal from cylindrical wall growth; (ii) a septal zone observed between pairs of bands is made up of two nascent poles and a single cross wall; and (iii) as septal zones develop in terms of relative age they increase in size (volume or surface area) or amount of wall. The data suggested that the S. faecalis model of surface growth (in which polar growth occurs through a regulated constrictive separation and expansion of a cross wall) also seems applicable to the pattern of septal growth observed here for B. subtilis. This was indicated from measurements which showed that increases in the size of nascent polar surfaces were correlated with decreases in cross wall diameter. An explanation of these observations may be that decreases in cross wall diameter were due to a progressive splitting of the cross wall that removed surface from the outer circumference of the cross wall and converted it into new polar surface. Calculations further suggested that if the poles of B. subtilis were made by this model a sizeable and variable increase in surface area of the cross wall would also be required to convert these separating cross wall layers into two curved polar structures. Measurements of wall thickness taken from various locations within septal zones indicated that while the thickness of the polar wall of B. subtilis was constant over its surface, the width of the cross wall varied considerably during a round of synthesis. Again, one of the simplest explanations compatible with these observations and those previously made in S. faecalis is that the B. subtilis cross wall is brought to a constant thickness (possibly by remodeling or precursor addition) before or during separation. Although most observations made from the reconstruction of the septal zones of B. subtilis may fit the S. faecalis model of surface growth, differences in the pattern of septal growth were seen when the two organisms were compared. These have been discussed in terms of differences in the regulation of their respective septal growth sites and basic mechanisms of wall assembly and modification.

Bacillus subtilis↗
PubMed1974

Septum formation in Escherichia coli: characterization of septal structure and the effects of antibiotics on cell division.

Septa can be demonstrated in sections of Escherichia coli strains B and B/r after fixation with acrolein and glutaraldehyde. The septum consists of an ingrowth of the cytoplasmic membrane and the mucopeptide layer; the outer membrane is excluded from the septum until the cells begin to separate. Mesosomes have also been observed. The septum is highly labile and, except in the chain-forming strains, E. coli D22 env A and CRT 97, not easily preserved by standard procedures. The labile nature of the septum may be due to the presence of autolysin(s) located at the presumptive division site. Blocking division by addition of ampicillin (2 to 5 mug/ml) to cells of E. coli B/r produces a bulge at the middle of the cells; bulge formation is stopped by addition of chloramphenicol. Cephalosporins also induce bulge formation but may stop cell elongation as well as division. Bulge formation, due to the presumed action of an autolysin(s), may be an initial step in the septation sequence when the mucopeptide is modified to allow construction of the septum. In a nonseptate filament-forming strain, PAT 84, which ceases to divide at 42 C, bulge formation only occurs in the presence of ampicillin at the time of a shift-down at 30 C or at 42 C in the presence of NaCl (0.25 to 0.34 M). Experiments with chloramphenicol suggest that the filaments are fully compartmentalized but fail to divide owing to the inactivation, rather than loss of synthesis, of an autolysin at 42 C.

Acrolein↗
PubMed1974

Electron microscope study of septum formation in Escherichia coli strains B and B-r during synchronous growth.

The formation of cell wall septa was monitored in Escherichia coli B and B/r during synchronous growth in glucose media at 37 C by means of electron microscopy. The visible events of septation comprised the following sequence, starting at about 30 min of incubation: (a) bleb formation of the outer membrane; (b) invagination of mucopeptide and cytoplasmic membrane (with associated mesosomes); the outer membrane is excluded from the septum; (c) formation of a cross-wall; (d) ingrowth of the outer membrane during cell separation. The septum is composed of a fold of cytoplasmic membrane plus mucopeptide, and the latter is a double structure, composed of two opposed lamellae separated by an electron-transparent gap. Experiments with chloramphenicol and nalidixic acid suggested that division could occur in the presence of these inhibitors once a round of deoxyribonucleic acid replication is completed. The initial stages of septation, as estimated by the potential of the cells to produce bulges in the presence of ampicillin, may involve the modification of mucopeptide by hydrolases at the end of the C period. Assembly of the septum may occur during the first half of the D period by means of precursors synthesized during the preceding C period.

Ampicillin↗