Biomedical subjects

I Eshkenazi

Publications and source records attributed to I Eshkenazi.

4 recordsLinked to original sources

PubMed2000

Immobilized parathion hydrolase: an amperometric sensor for parathion.

An amperometric enzyme biosensor for the direct measurement of parathion was developed. The biosensor is based on parathion hydrolase from Pseudomonas sp. isolated from contaminated soil. The enzyme, which was immobilized on a carbon electrode, catalyzes the hydrolysis of parathion to form p-nitrophenol, which was detected by its anodic oxidation. The enzymatic and electrochemical reactions were examined and optimized. Screen-printed electrodes and a microflow injection system provide the means to significantly reduce the volume of the detected samples. Pulsed techniques further increased the sensitivity of the measurement. The current signal was linearly related to the parathion concentration, and the detection limit was less than 1 ng/mL. The biosensor is rapid as well and can be used outdoors and indoors by a nonqualified person.

Aryldialkylphosphatase↗

PubMed2000

A micro flow injection electrochemical biosensor for organophosphorus pesticides.

We describe a disposable, amperometric micro flow injection electrochemical biosensor that can be applied to the identification and quantification of highly toxic organophosphorus (OP) compounds in the environment, on the spot and in a short time. The system traces very small quantities of OP by monitoring the enzymatic reaction of acetylcholine esterase (AChE) and its inhibition. The sensor is sensitive, rapid, small, inexpensive, disposable and can be operated by non-professional technicians. The electrochemical cell consists of screen-printed electrodes covered with an enzymatic membrane and placed in a home-made flow cell. The electrodes are connected to a computer-controlled potentiostat. We quantitatively detected the OP compound, dimethyl 2,2-dichlorovinyl phosphate (DDVP), by monitoring the OP induced decrease in enzymatic degradation of the substrate, acetylthiocholine chloride (ATCh), to thiocholine and acetic acid. Thiocholine reacts with hexacyanoferrate ion in the working solution and the reduction of [Fe(CN)6](-3) to [Fe(CN)6](-4) and its subsequent reoxidization by the electrode generates very sharp, rapid and reproducible electric signals. The ability to detect low quantities is extremely important when dealing with hazardous environmental pollutants.

Acetylcholinesterase↗

PubMed2000

A three-cascaded-enzymes biosensor to determine lactose concentration in raw milk.

The increasing demand for on-line measurement of milk composition directs science and industry to search for practical solutions, and biosensors may be a possibility. The specific objective of this work was to develop an electrochemical biosensor to determine lactose concentration in fresh raw milk. The sensor is based on serial reactions of three enzymes--beta-galactosidase, glucose oxidase, and horseradish peroxidase--immobilized on a glassy carbon electrode. The sequential enzymatic reactions increase the selectivity and sensitivity of the sensor. The sensor requires dilution of the raw milk and the addition of 5-aminosalicylic acid. Lactose concentrations in raw milk measured by the sensor were in good agreement with those measured by a reference laboratory using infrared technology. The results were obtained in milk samples that varied in fat and protein composition. From the results, we conclude that an electrochemical biosensor for determination of lactose concentration in fresh raw milk can be developed, and that the biosensor presented in this study maintained the qualities required for further development into an online sensor in the milking parlor.

Animals↗

PubMedDate not supplied

Amperometric biosensors based on microflow injection system.

Novel electrochemical cells based on a microflow system combined with amperometric enzyme electrodes were developed and served for quantitative determination of various compounds, such as organophosphates and lactose. The resulting biosensors are selective and efficient owing to immobilization of the sensing elements on the electrodes. The sensors are easy to operate, and the procedures are rapid, accurate, reproducible, and inexpensive, requiring neither special skills and training nor complicated instrumentation. The use of a microflow cell ensures the continuous flux of a new substrate, thus preventing the accumulation or adsorption of products to the electrode. Miniaturization of the sensor has two main advantages: (1) it is easy to carry and therefore can be used outdoors as well, and (2) it allows working with low volumes of compounds and reagents, which is highly important when dealing with hazardous compounds.

Acetylthiocholine↗