PubMed Health⌕ Search

Biomedical subjects

I K Reddy

Publications and source records attributed to I K Reddy.

At least 19 recordsLinked to original sources

Formulation and stability evaluation of ketoprofen sustained-release tablets prepared by fluid bed granulation with Carbopol 971P solution.

The objectives of the present study were: (1) to investigate the possibility of using a Carbopol polymeric solution as granulating agent by the fluid bed granulating process; (2) to select a suitable method of tabletting for sustaining the release of ketoprofen for 12 hr; (3) to perform stability studies according to International Committee on Harmonization (ICH) guidelines and photostability on ketoprofen SR tablets; (4) to study the influence of the storage conditions on release kinetics and melting endotherm of ketoprofen; and (5) to predict the shelf-life of the ketoprofen SR tablets. Tabletting ingredients were ketoprofen, anhydrous dicalcium phosphate, Carbopol 971P, talc, and magnesium stearate. Carbopol 971P solution (0.8% w/v) was used as a granulating solution in the fluid bed granulator. For comparative evaluation, tablets were also prepared by direct compression and wet granulation, and subjected to dissolution. Tablets prepared by fluid bed granulation technique were stored in incubators maintained at 37, 40, 50, and 60 degrees C, 40 degrees C/75% RH, 30 degrees C/60% RH, and 25 degrees C/60% RH, and in a light chamber with light intensity of 600 ft candle at 25 degrees C. Melting endotherms were obtained for the drug as well as the tablets during stability studies by differential scanning calorimetry. Tablets prepared by fluid bed granulation technique prolonged the release of ketoprofen better than tablets obtained by direct compression and wet granulation. Further, it complied with the requirements of ICH guidelines for stability testing. Higher temperature and humidity (40 +/- 2 degrees C/75% RH, 40 degrees C, 50 degrees C, and 60 degrees C) adversely affected the rate and extent of the dissolution. Ketoprofen SR tablets stored in amber-colored bottles demonstrated a good photostability for 6 months at 600 ft candle. The shelf-life of the formulation was predicted as 32 months.

Acrylic Resins↗

Polymethyacrylate based microparticulates of insulin for oral delivery: preparation and in vitro dissolution stability in the presence of enzyme inhibitors.

The purpose of this investigation was to (a) evaluate the coprecipitation technique for preparing microparticulates of insulin, (b) study the effect of variables such as addition of salts in the precipitating medium and ratio of polymeric solution to volume of precipitating medium on the dissolution and encapsulation efficiency of insulin microparticulates, and (c) evaluate the in-vitro enzymatic dissolution stability of insulin microparticulates in the presence of chicken ovomucoid (CkOVM) and duck ovomucoid (DkOVM) as inhibitors. Insulin dissolved in 0.01 N HCl was mixed with alcohol USP to get a final concentration of 32% v/v. Eudragit L100, a representative polymethyacrylate polymer, was then dissolved in this solution which was transferred to a beaker containing cold water with homogenization to obtain microparticulates. Dissolution studies were carried out in pH 6.8 phosphate buffer using a 100-ml conversion kit in a standard dissolution assembly. Dissolution stability of microparticulates was evaluated in the presence of 0.5 microM trypsin and 0.l microM chymotrypsin at various ratios of CkOVM and DkOVM. The results indicated that insulin microparticulates could be prepared using the coprecipitation technique with high encapsulation efficiency by proper selection of experimental conditions and amount of polymer. Presence of salts in the precipitating medium decreased the dissolution of insulin from the microparticulates. As the ratio of precipitating medium with respect to the polymeric solution was increased, the encapsulation efficiency increased. In dissolution stability experiments, insulin was not detected in the presence of enzymes alone. When CkOVM and DkOVM were incorporated, the stability of insulin increased significantly in a concentration dependent fashion.

Administration, Oral↗

Self-emulsifying drug delivery systems (SEDDS) of coenzyme Q10: formulation development and bioavailability assessment.

The goals of our investigations are to develop and characterize self-emulsifying drug delivery systems (SEDDS) of coenzyme Q10 (CoQ10), using polyglycolyzed glycerides (PGG) as emulsifiers and to evaluate their bioavailability in dogs. Solubility of CoQ10 was determined in various oils and surfactants. SEDDS consisted of oil, a surfactant and a cosurfactant. Four types of self-emulsifying formulations were prepared using two oils (Myvacet 9-45 and Captex-200), two emulsifiers (Labrafac CM-10 and Labrasol) and a cosurfactant (lauroglycol). In all the formulations, the level of CoQ10 was fixed at 5.66% w/w of the vehicle. The in vitro self-emulsification properties and droplet size analysis of these formulations upon their addition to water under mild agitation conditions were studied. Pseudo-ternary phase diagrams were constructed identifying the efficient self-emulsification region. From these studies, an optimized formulation was selected and its bioavailability was compared with a powder formulation in dogs. Medium chain oils and Myvacet 9-45 provided higher solubility than long chain oils. Efficient and better self-emulsification processes were observed for the systems containing Labrafac CM-10 than formulations containing Labrasol. Addition of a cosurfactant improved the spontaneity of self-emulsification. From these studies, an optimized formulation consisting of Myvacet 9-45 (40%), Labrasol (50%) and lauroglycol (10%) was selected for its bioavailability assessment. A two-fold increase in the bioavailability was observed for the self-emulsifying system compared to a powder formulation. SEDDS have improved the bioavailability of CoQ10 significantly. The data suggest the potential use of SEDDS to provide an efficient way of improving oral absorption of lipophilic drugs.

Animals↗

Novel site-specific chemical delivery system as a potential mydriatic agent: formation of phenylephrine in the iris-ciliary body from phenylephrone chemical delivery systems.

The objective of this study was to test the three novel ester derivatives of phenylephrone (isovaleryl, phenylacetyl, and pivalyl esters) as potential site-specific chemical delivery systems. The mydriatic effect and ocular distribution/metabolism of these compounds were studied by topical application to the eyes of normal rabbits. It was assumed that a reduction-hydrolysis sequence could produce the active phenylephrine in the iris-ciliary body tissues. All the derivatives showed a more pronounced mydriatic effect than that of phenylephrine, whereas phenylephrone was completely devoid of any mydriatic activity. Phenylacetyl ester was the most potent drug, with short duration of action, and showed maximum activity in the presence of 0.01% benzalkonium chloride without causing any visible irritation to the rabbit eye. Administration of the novel compounds to the eyes of the rabbits showed no traces of phenylephrine in the systemic circulation, contrary to topical administration of phenylephrine. Phenylephrone was detected in different compartments of the eye, whereas phenylephrine was present only in the iris-ciliary body tissues following administration of phenylacetyl ester. The conversion of phenylephrone esters to the active drug, phenylephrine, and thus their subsequent activity was dependent on the physicochemical characteristics of the drugs. The results suggest the potential use of phenylacetyl ester as a potent short-term mydriatic agent without systemic side effects.

Animals↗

Design, in vitro stability, and ocular hypotensive activity of t-butalone chemical delivery systems.

The objective of this work was to synthesize two bioreversible diacyl derivatives of t-butalone (chemical delivery systems), determine their chemical and in vitro stability, and investigate their potential use as topical antiglaucoma agents. The stability of these compounds was determined in isotonic phosphate buffers (pH range 5-8) and in selected biological media, including human whole blood, rabbit and rat blood, and the anterior segment tissues of rabbit. The ocular hypotensive activity of these compounds in unrestrained, normotensive albino rabbits was determined with a pneumatonometer. The two compounds were stable at lower pH. The stability decreased as the pH increased, suggesting their lability to base-catalyzed hydrolysis. These compounds exhibited significant differences in the hydrolytic rates in the whole blood among species examined (rat > rabbit > human). The observed rates of disappearance in different ocular tissues were indicative of relative enzyme activity in these media (iris-ciliary body > cornea > aqueous humor). The two compounds exhibited a significant ocular hypotensive activity (P < 0.01) at 2% dose level. The peak activity was found between 2 and 4 h, and the activity was maintained for 4.5 to 7 h. The dipivalyl derivative of t-butalone exhibited more pronounced decrease in intraocular pressure than that of diisovaleryl derivative. The present study suggests the possible use of diacyl derivatives of t-butalone as ocular hypotensive agents.

Animals↗

Intraocular pressure-lowering activity and in vivo disposition of dipivalyl terbutalone in rabbits.

The ocular hypotensive activity and in vivo disposition of dipivalyl terbutalone, a chemical delivery system for terbutaline, were investigated in the albino rabbit model. The dose-response relationship was assessed at drug concentrations ranging from 0.5 to 4% in normal saline. Intraocular pressure (IOP)-lowering activity of dipivalyl terbutalone was compared with epinephrine in equal concentrations. The in vivo disposition was investigated after topical administration of dipivalyl terbutalone at 4% dose level for which two metabolic products, terbutaline, and terbutalone, were monitored in different anterior segment tissues/fluid of albino rabbits, including corneal and iris-ciliary body homogenates and aqueous humor. The instillation of 0.5, 1, 2, and 4% solutions (1 drop of 50 microL) significantly decreased the IOP of normotensive rabbits in a dose-dependant manner. At the highest dose, the maximum reduction (5.6 +/- 0.65 mm Hg) was observed at 3 h. In a comparative efficacy study, dipivalyl terbutalone was found to be more effective than epinephrine. In the in vivo distribution after the topical administration of dipivalyl terbutalone, terbutaline was found only in the iris-ciliary body, whereas terbutalone was found in all parts of the eye studied. This work suggests the potential use of dipivalyl terbutalone as an antiglaucoma agent, representing a new chemical delivery system for terbutaline.

Administration, Topical↗

Transport studies of insulin across rat jejunum in the presence of chicken and duck ovomucoids.

Our aim was to evaluate the transport of insulin across rat jejunum in the presence of ovomucoids and to assess the effect of ovomucoids on intestinal tissue by studying the permeation of a lipophilic and a hydrophilic marker. Rat jejunal segments were mounted in a side-by-side diffusion chamber filled with Krebs bicarbonate buffer, bubbled with 95% O2/5% CO2 at a fixed flow rate and maintained at 37 degrees C. The permeation of insulin, a lipophilic marker ([7- 3H] testosterone) and a hydrophilic marker (D-[1- 14C] mannitol) was evaluated in the presence of 0.5-1.5 microM duck ovomucoid (DkOVM) or chicken ovomucoid (CkOVM). For stability and permeation of insulin in the presence of alpha-chymotrypsin, an enzyme-to-inhibitor ratio of 1:1 and 1:2 was used. In the absence of alpha-chymotrypsin, the permeability coefficient (Papp) of insulin at pH 7.4 was 0.922+/- 0.168 x 10(-7) cm s(-1), which decreased with increasing concentrations of DkOVM or CkOVM. Conversely, the permeation of the hydrophilic and lipophilic marker increased with increasing concentrations of CkOVM and DkOVM. In stability studies, the percentage of drug remaining was found to be 2-fold higher at the 1:2 ratio than with the 1:1 ratio of enzyme to inhibitor. This was in agreement with the 2-fold increase in flux values of insulin in the presence of alpha-chymotrypsin and DkOVM at the 1:2 ratio of enzyme to inhibitor. The decrease in permeation of insulin in ovomucoids was unexpected. Marker transport studies indicated that ovomucoids have the potential to modulate transcellular and paracellular permeability. The flux enhancement of insulin in the presence of alpha-chymotrypsin and DkOVM is encouraging. The use of ovomucoids offers potential to enhance oral delivery of insulin and warrants further investigation.

Animals↗

Long-term stability characterization of a controlled release gastrointestinal therapeutic system coated with a cellulose acetate pseudolatex.

The objective of the present study was to study the long term effects of storage of osmotically controlled gastrointestinal therapeutic system (GITS) in exaggerated conditions of temperature and humidity. Bilayered osmotic tablets were obtained with atenolol, Polyox N80, Carbopol 934P and magnesium stearate in one layer, and Polyox 303, Carbopol 974, sodium chloride and magnesium stearate in the other layer. A customized cellulose acetate (CA) pseudolatex was used to provide semipermeable housing around the tablet and an orifice was drilled into the drug layer to obtain the Atenolol GITS. The GITS were stored at 4 degrees C (refrigeration), 25 degrees C, 37 degrees C, 45 degrees C, 55 degrees C, 37 degrees C/11% RH, 37 degrees C/51% RH, and 37 degrees C/91% RH. Quantitative X-ray diffraction and dissolution studies were performed at regular intervals for one year. Aqueous CA polymeric film formation continued in GITS stored at higher temperature by gradual evaporation of moisture and coalescence of polymer. At lower temperatures atenolol crystallinity increased with time, but at higher temperatures the crystallinity was decreased. At higher humidity, a decrease in crystallinity was observed. A decrease in dissolution rate and extent was observed at higher temperature and higher humidity conditions. Exaggerated temperature and humidity conditions affected the dissolution profile by modifying the CA pseudolatex membrane and crystallinity of atenolol.

Adrenergic beta-Antagonists↗

Naproxen-Eudragit microspheres: screening of process and formulation variables for the preparation of extended release tablets.

The objectives of the present study were to screen the formulation and process variables for the preparation of extended release naproxen tablets with Eudragit L100-55. The tablets were prepared by compression of microspheres that were obtained by a coprecipitation technique. The process involved dissolution of naproxen and Eudragit L 100-55 in alcohol USP followed by the addition of an aqueous solution containing a surfactant and deaggregating agents. The mixture was stirred for a specified time period to obtain microspheres, which were filtered and air-dried to a constant weight. The microspheres were then compressed to obtain plain tablets with a diameter of 12 mm. A 7-factor 12-run Plackett-Burman screening design was employed to evaluate the main effects of homogenization time (X1), rate of water addition (X2), amount of polymer (X3), amount of precipitating solution (X4), concentration of electrolytes (X5), compression pressure (X6), and the concentration of lubricant (X7) on the rate of drug release. The response variable was cumulative percent of naproxen dissolved in 12 h in simulated intestinal fluid with constraints on responses that included percent yield, hardness, thickness, and the angle of repose. Mathematical relationship for percent of naproxen dissolved in 12 h (Y5) with various factors yielded the following polynomial equation; Y5 (% dissolved in 12 h) = 95.48 + 0.53 X1 + 3.51 X2 + 3.84 X3 - 3.80 X4 - 2.46 X5 - 2.90 X6 - 3.91 X7. The results showed that all the seven factors affected, with varying order, the release of naproxen from its compressed tablets.

Acrylic Resins↗

Analysis of ubidecarenone (CoQ10) aqueous samples using reversed phase liquid chromatography.

A novel method was developed for the quantitative determination of ubidecarenone (CoQ10) in aqueous media using non aqueous reversed phase liquid chromatography. Standards were prepared by melting the compound in Cremophor EL followed by dilution with distilled water. Samples were then analyzed by a Reverse Phase HPLC method using a Waters Novapak C18, 3.9 x 150 mm column. The mobile phase used was methanol: n-hexane (9:1) at a flow rate of 1.5 ml/min. Response of the detector to the analyte was linear (r: 0.999) over the range of 2.5-100 micrograms ml-1, with a limit of detection of 0.17 microgram ml-1. Acetone used to solubilize CoQ10 in the surfactant and Cremophor EL did not interfere with sample analysis. This method provided a convenient and alternative approach to the existing methods that require organic solvent extractions prior to analysis. Besides, this method enabled the separation of major photolytic decomposition products of CoQ10.

Chromatography, High Pressure Liquid↗

Honey, a prospective antibiotic: extraction, formulation, and stability.

Old and recent reports show that honey has beneficial effects on the skin as antiseptic for wounds, burns and ulcers and as a healing promoter. Many investigators confirmed the usefulness of honey in the treatment of skin infections as well as internal diseases. The factors behind these effects are not completely explained. The aim of this study is: a) to investigate the antimicrobial activity of crude honey, b) to separate the fractions responsible for its activity, c) to formulate the honey extract as semisolid dosage forms, d) to study its release, and e) to determine its stability. The results showed that the ethylacetate honey extract showed antibacterial, anticandida and antifungal effects at low concentration. The release of honey extract from different ointment bases was depending on the constituents of the base, and its stability was found to be temperature and base dependent.

Acetates↗

Captopril gastrointestinal therapeutic system coated with cellulose acetate pseudolatex: evaluation of main effects of several formulation variables.

Maintenance of constant drug levels in the body for those drugs that are used in management of hypertension is extremely beneficial. This can be successfully achieved by delivering the antihypertensives as osmotically-controlled drug-delivery system that essentially eliminates the influence of pH on the drug release. The main objective of this study was to evaluate the main effects of the formulation variables on the release of captopril from osmotically-controlled drug-delivery system coated with a custom-made cellulose acetate (CA) pseudolatex reported earlier. A secondary objective was to identify a suitable antioxidant for incorporating in the formulation as the drug undergoes metal-catalyzed oxidative degradation. The drug showed good stability (> or = 90% intact captopril) in solution in the presence of ascorbic acid for a period of 48 h. A seven-factor, 12-run Plackett-Burman screening design was employed to study the main effects of amounts of Polyox(R) N10 and N80, Carbopol(R) 934P and 974P, sodium chloride, orifice size, and % coating weight gain. The response variable was cumulative percent of drug released in 12 h, Y(3), with constraints on lag time Y(1) and time for 50% drug released Y(2)amount of sodium chloride (1.97).

Algorithms↗

Stability characterization of controlled release coprecipitates and solid dispersions.

The present study was conducted to determine the effects of ageing at exaggerated storage conditions on controlled release tablets prepared with indomethacin-Eudragit((R)) coprecipitates (CPs) and solid dispersions (SDs). CPs and SDs compressed as tablets were stored at -20, 4, 37, 45, 55, 37 degrees C/11% RH, 37 degrees C/51% RH and 37 degrees C/91% RH. The samples were analyzed over a period of six months for their dissolution, crystalline reversion and thermal changes. Samples stored at extremely low temperatures, higher temperatures and humidity conditions exhibited a significant decrease in dissolution rates. However, no significant change in the release rates was observed for samples stored at 4 degrees C. The degree of crystallinity increased over a period of time as confirmed by X-ray diffractometry. DSC data demonstrated that indomethacin exists in two polymorphic forms, Form I (mp 160-161 degrees C) and Form II (mp 153-154 degrees C). CPs showed an endotherm of Form I, whereas SDs showed a mixture of Form I and II.

Acrylic Resins↗

Permeability of chemical delivery systems across rabbit corneal (SIRC) cell line and isolated corneas: a comparative study.

The purpose of this study was to investigate the corneal permeability of phenylephrone chemical delivery systems (CDS) across isolated cornea and to evaluate the utility of the SIRC cell line (epithelial cells originating from rabbit cornea) as an in vitro model for predicting the ocular permeability. The effect of benzalkonium chloride (BAC) on the drug permeability through SIRC cell layers was also studied. The transport of phenylephrone CDS across the isolated cornea of the albino rabbit was measured at various pH values using a two-chamber glass diffusion cell, and the results were compared with the reported permeability values across SIRC cells of rabbit origin. Corneal membranes showed lower flux values for compounds, especially for hydrophilic compounds, than the SIRC cell line. A significant correlation was observed between the permeability coefficients through corneal membranes and SIRC cells. When the pH of the transport medium was increased, the permeability coefficients increased and lag times decreased in both in vitro models. Furthermore, both in vitro models showed significant correlation between permeability coefficients and lipophilicities of the drugs. The three esters, having higher lipophilic characteristics, showed higher permeability than phenylephrine HCl. The phenylacetyl ester of phenylephrone showed a three-fold increase in penetration across SIRC cell layers in the presence of 0.01% BAC. These results suggest that the use of SIRC cell layers can reasonably predict the permeability of ophthalmic drugs across corneal membranes.

Animals↗

Chirality and its implications in transdermal drug development.

Today more than 50% of marketed drugs are chiral. It has been well recognized that the stereochemistry of chiral drugs has a major influence on their pharmacological, pharmacokinetic, and toxicological actions. Studies on enantiomeric differences in the percutaneous permeation of chiral compounds have been actively pursued in recent years. Stratum corneum, the rate-limiting barrier in transdermal permeation, is made up of keratin and ceramide, which could potentially provide chiral environment. Transdermal delivery is often facilitated by the presence of penetration enhancers, which act primarily by altering the diffusion by disrupting the highly ordered membrane structure or by affecting the partitioning behavior of the diffusant molecules. Enantioselective permeation was observed with some chiral excipients including terpene enhancers. While studies on crystalline structures of pure enantiomers and racemates are helpful in understanding the basis for differentiation of physicochemical properties, prediction and control of permeability of enantiomers and racemates based on the physicochemical characteristics would be highly beneficial. The flux characteristics of enantiomers and racemates appear to be dependent upon their thermodynamic properties. Such analyses have a predictive value and are useful in the transdermal drug product development of chiral molecules. While the decision to market either an individual enantiomer or racemate lies strictly under the control of the sponsors, the guidance of the Food and Drug Administration is very helpful. This review presents an overview of the skin structure and transport and a concise review of enantioselective permeation with or without chiral enhancers. Regulatory perspectives on chiral drug product development are also discussed.

Administration, Cutaneous↗

Effect of chiral enhancers on the permeability of optically active and racemic metoprolol across hairless mouse skin.

The stratum corneum, the rate-limiting barrier in transdermal drug delivery, is chiral in nature and enantiomers behave differently with respect to their transport across the skin, resulting in enantioselective permeation. The permeation characteristics of individual enantiomers of metoprolol free base (MB) were investigated using hairless mouse skin. The influence of chiral permeation enhancers, l-menthol and (+/-)-linalool, on the permeation of MB was also investigated. In the absence of enhancers, the permeation profiles of R- and S-MB from donor solutions containing either RS-MB or pure enantiomers are comparable (p < 0. 05). In presence of enhancers, l-menthol and (+/-)-linalool, the flux values were increased 2.4- to 3.0-fold, respectively, and the permeation profiles of R- and S-MB from donor solutions containing RS-MB are comparable (p < 0.05). However, when donor vehicle contains pure enantiomers, the permeation enhancing effect of l-menthol on S-MB was significantly higher (by 25%) than on R-MB (p < 0.05). Further, in presence of l-menthol, the flux of S-MB from donor solution containing pure S-MB was 35% higher than the flux of RS-MB from racemate. No such effect was seen with (+/-)-linalool. In all the investigations, no enantiomeric inversion was observed during the permeation process. The lag times were shorter in the case of l-menthol compared with (+/-)-linalool.

Administration, Cutaneous↗

Permeability characteristics of novel mydriatic agents using an in vitro cell culture model that utilizes SIRC rabbit corneal cells.

The purpose of this study was to evaluate the permeability characteristics of a previously reported in vitro corneal model that utilizes SIRC rabbbit corneal cells and to investigate the permeability of three novel esters of phenylephrone chemical delivery systems (CDS) under different pH conditions using this in vitro model. The SIRC rabbit corneal cell line was grown on transwell polycarbonate membranes, and the barrier properties were assessed by measuring transepithelial electrical resistance (TEER) using a voltohmmeter. The permeabilities of esters of phenylephrone CDS across the SIRC cell layers were measured over a pH range 4.0-7. 4. The esters tested include phenylacetyl (1), isovaleryl (2), and pivalyl (3). The SIRC rabbit corneal cell line, when grown on permeable filters, formed tight monolayers of high electrical resistance with TEER values increasing from 71.6 +/- 20.8 Omega.cm2 at day 3 in culture to 2233.42 +/- 15.2 Omega.cm2 at day 8 in culture and remained constant through day 14 in culture. The transepithelial permeability coefficients (Papp) at pH 7.4 ranged from 0.58 x 10(-6) cm/s for the hydrophilic marker, mannitol, to 43. 5 x 10(-6) cm/s for the most lipophilic molecule, testosterone. The Papp at pH 7.4 for phenylephrine was 4.21 x 10(-6) cm/s. The Papp values and the lag times of the three esters of phenylephrone were pH dependent. The Papp for 1, 2, and 3 at pH 7.4 were 14.76 x 10(-6), 13.19 x 10(-6), and 12.86 x 10(-6) cm/s, respectively and the permeabilities decreased at conditions below pH 7.4. The lag times at pH 7.4 were 0.10, 0.17, and 0.12 h for 1, 2, and 3, respectively, and the values increased at lower pH conditions. The TEER values of SIRC cell line observed at day 8 to day 14 in the present investigation are similar to the resistance value reported for rabbit cornea (2 kOmega.cm2). All the esters showed significantly (p < 0.05) higher permeabilities than phenylephrine at pH 7.4. The rate and extent of transport of the drugs across the cell layers were influenced by the fraction of ionized and un-ionized species and the intrinsic partition coefficient of the drug. The results indicate that the permeability of ophthalmic drugs through ocular membranes may be predicted by measuring the permeability through the new in vitro cell culture model.

Adrenergic alpha-Agonists↗

Cataplasm-based controlled drug delivery: development and optimization of a novel formulation.

The objective of the present study was to study the formulation variables involved in the development of a novel plasterlike preparation (cataplasm) and to optimize important formulation variables with an aim to maximize the in vitro release of the drug with minimum lag time. Cataplasm was prepared by dispersing a model drug (ibuprofen), humectant (glycerol), adhesive (Indopol H100), polymer (Carbopol C934P) with other formulation ingredients in a beaker with an open-blade impeller. The paste was cast on a nonocclusive backing membrane and dried overnight. The diffusion of the model drug was studied across a cellulosic membrane using Franz's diffusion cells. The amounts of three formulation variables, carbopol (X1), glycerol (X2), and indopol (X3) were studied at three levels, and a face-centered cubic design was used to maximize the flux. An optimization procedure for maximum flux and minimum lag time predicted a flux of 97.22 mcg/cm2/hr at X1 (2% w/w), X2 (11.75% w/w), and X3 (6%, w/w). An experimental patch prepared with the above concentrations yielded a flux of 90.7 mcg/cm2/hr.

Acrylic Resins↗