PubMed Health⌕ Search

Biomedical subjects

Ian Bennion

Publications and source records attributed to Ian Bennion.

At least 19 recordsLinked to original sources
PubMed2007

Dual-peak long-period fiber gratings with enhanced refractive index sensitivity by finely tailored mode dispersion that uses the light cladding etching technique.

We have experimentally investigated the mode dispersion property and refractive index sensitivity of dual-peak long-period fiber gratings (LPGs) that were sensitized by hydrofluoric acid (HF) etching. The nature of the coupled cladding modes close to the dispersion turning point makes the dual-peak LPGs ultrasensitive to cladding property, permitting a fine tailoring of the mode dispersion and index sensitivity by the light cladding etching method using HF acid of only 1% concentration. As an implementation of an optical biosensor, the etched device was used to detect the concentration of hemoglobin protein in a sugar solution, showing a sensitivity as high as 20 nm/1%.

Journal Article↗
PubMed2006

Dynamic two-axis curvature measurement using multicore fiber Bragg gratings interrogated by arrayed waveguide gratings.

We describe the use of arrayed waveguide gratings (AWGs) in the interrogation of fiber Bragg gratings (FBGs) for dynamic strain measurement. The ratiometric AWG output was calibrated in a static deflection experiment over a +/-200 microepsilon range. Dynamic strain measurement was demonstrated with a FBG in a conventional single-mode fiber mounted on the surface of a vibrating cantilever and on a piezoelectric actuator, giving a resolution of 0.5 microepsilon at 2.4 kHz. We present results of this technique extended to measure the dynamic differential strain between two FBG pairs within a multicore fiber. An arbitrary cantilever oscillation of the multicore fiber was determined from curvature measurements in two orthogonal axes at 1125 Hz with a resolution of 0.05 m(-1).

Journal Article↗
PubMed2006

Direct inscription of Bragg gratings in coated fibers by an infrared femtosecond laser.

Inscription of fiber Bragg gratings through the coating of a nonphotosensitized standard telecommunication fiber is demonstrated for what is believed to be the first time. Highly reflective gratings were produced by direct point-by-point writing with an infrared femtosecond laser. The length of the gratings presented ranged from 5 to 26 mm. The technique does not require a special coating, as standard coatings are transparent to infrared radiation. Inscription through the coating improves the mechanical strength of the processed segment of fiber.

Journal Article↗
PubMed2006

Optic sensors of high refractive-index responsivity and low thermal cross sensitivity that use fiber Bragg gratings of >80 degrees tilted structures.

For the first time to the authors' knowledge, fiber Bragg gratings (FBGs) with >80 degrees tilted structures have been fabricated and characterized. Their performance in sensing temperature, strain, and the surrounding medium's refractive index was investigated. In comparison with normal FBGs and long-period gratings (LPGs), >80 degrees tilted FBGs exhibit significantly higher refractive-index responsivity and lower thermal cross sensitivity. When the grating sensor was used to detect changes in refractive index, a responsivity as high as 340 nm/refractive-index unit near an index of 1.33 was demonstrated, which is three times higher than that of conventional LPGs.

Journal Article↗
PubMed2005

Strain and temperature sensitivity of a single-mode polymer optical fiber.

We have measured the optical phase sensitivity of fiber based on poly(methyl methacrylate) under near-single-mode conditions at 632.8 nm wavelength. The elongation sensitivity is 131 +/- 3 x 10(5) rad m(-1) and the temperature sensitivity is -212 +/- 26 rad m(-1) K(-1). These values are somewhat larger than those for silica fiber and are consistent with the values expected on the basis of the bulk polymer properties.

Journal Article↗
PubMed2005

Transverse load and orientation measurement with multicore fiber Bragg gratings.

We demonstrate the sensitivity of Bragg gratings in a multicore fiber to transverse load. The Bragg peaks are split because of stress-induced birefringence, the magnitude of which depends upon the load and grating position relative to the load axis. Experiments show that a set of gratings in a four-core fiber can measure a load axis angle to +/- 5 degrees and a load magnitude to +/- 15 N m(-1) up to 2500 N m(-1). We consider alternative designs of multicore fiber for optimal load sensing and compare experimental and modeled data.

Journal Article↗
PubMed2005

Strong long-period fiber gratings recorded at 352 nm.

We describe long-period grating inscription in hydrogenated telecom fibers by use of high-intensity femtosecond 352 nm laser pulses. We show that this technique allows us to fabricate high-quality 30 dB gratings of 300 microm period and 2 cm length by use of a three-photon absorption mechanism.

Journal Article↗
PubMed2005

Optically tunable chromatic dispersion controller with coupled-cavity etalon structure.

We propose and demonstrate a novel optically tunable dynamic dispersion-compensation device with coupled-cavity etalon structure. Experimentally, it was achieved with an all-fiber coupled-cavity etalon made in an Er/Yb codoped fiber pumped by a 980-nm laser diode. The dispersion was tuned from -300 to +400 ps/nm in the experiment. The potential advantages of such optically tunable dispersion compensators include fast response time and remotely controllable operation.

Journal Article↗
PubMed2005

High extinction ratio in-fiber polarizers based on 45 degree tilted fiber Bragg gratings.

We report a near-ideal in-fiber polarizer implemented by use of 45 degrees tilted fiber Bragg grating structures that are UV inscribed in hydrogenated Ge-doped fiber. We demonstrate a polarization-extinction ratio of 33 dB over a 100-nm operation range near 1550 nm. We further show an achievement of 99.5% degree of polarization for unpolarized light with these gratings. We also theoretically investigate tilted grating structures based on the Green's function calculation, therein revealing the unique polarization characteristics, which are in excellent agreement with experimental data.

Journal Article↗
PubMed2005

Simultaneous measurement of temperature and external refractive index by use of a hybrid grating in D fiber with enhanced sensitivity by HF etching.

We propose a dual-parameter optical sensor device achieved by UV inscription of a hybrid long-period grating-fiber Bragg grating structure in D fiber. The hybrid configuration permits the detection of the temperature from the latter's response and measurement of the external refractive index from the former's response. In addition, the host D fiber permits effective modification of the device's sensitivity by cladding etching. The grating sensor has been used to measure the concentrations of aqueous sugar solutions, demonstrating its potential capability to detect concentration changes as small as 0.01%.

Journal Article↗
PubMed2004

Bend sensors with direction recognition based on long-period gratings written in D-shaped fiber.

The curvature- or bend-sensing response of long-period gratings (LPGs) UV inscribed in D-shaped fiber has been investigated experimentally. Strong fiber-orientation dependence of the spectral response when such LPGs are subjected to bending at different directions has been observed and is shown to form the basis for a new class of single-device sensor with vector-sensing capability. Potential applications utilizing the linear response and unique bend-orientation characteristics of the devices are discussed.

Journal Article↗
PubMed2004

Differential birefringence in Bragg gratings in multicore fiber under transverse stress.

We present experimental measurements of the peak splitting of the reflection spectra of fiber Bragg gratings as a result of birefringence induced by transverse loading of a multicore fiber. Measurements show that the splitting is a function of the applied load and the direction of the load relative to the azimuth of the fiber. A model for calculating the stress in the fiber that is due to an applied load is in good agreement with our experimental observations.

Journal Article↗
PubMed2004

Quadratic behavior of fiber Bragg grating temperature coefficients.

We describe the characterization of the temperature and strain responses of fiber Bragg grating sensors by use of an interferometric interrogation technique to provide an absolute measurement of the grating wavelength. The fiber Bragg grating temperature response was found to be nonlinear over the temperature range -70 degrees C to 80 degrees C. The nonlinearity was observed to be a quadratic function of temperature, arising from the linear dependence on temperature of the thermo-optic coefficient of silica glass over this range, and is in good agreement with a theoretical model.

Journal Article↗
PubMed2004

Use of dual-grating sensors formed by different types of fiber Bragg gratings for simultaneous temperature and strain measurements.

We report on a systematic investigation of the dependence of both temperature and strain sensitivities on the fiber Bragg grating type, including the well-known Type I, Type IIA, and a new type that we have designated Type IA, using both hydrogen-free and hydrogenated B/Ge codoped fibres. We have identified distinct sensitivity characteristics for each grating type, and we have used them to implement a novel dual-grating, dual-parameter sensor device. Three dual-grating sensing schemes with different combinations of grating type have been constructed and compared, and that of a Type IA-Type IIA combination exhibits the best performance, which is also superior to that of previously reported grating-based structures. The characteristics of the measurement errors in such dual-grating sensor systems is also presented in detail.

Journal Article↗