PubMed Health⌕ Search

Biomedical subjects

Ian Manners

Publications and source records attributed to Ian Manners.

At least 19 recordsLinked to original sources
PubMed2006

Homogeneous, titanocene-catalyzed dehydrocoupling of amine-borane adducts.

Transition metal catalysis represents a relatively unexplored but potentially useful route to form bonds between main group elements. Previous work in the area of amine-borane adduct dehydrocoupling has exclusively employed late transition metal (e.g., Rh) catalysts which were found to predominantly operate via a heterogeneous mechanism. Herein, we present a new, early transition-metal-catalyzed, homogeneous system which exhibits higher activity.

Journal Article↗
PubMed2006

Carbon nanotubes with small and tunable diameters from poly(ferrocenylsilane)-block-polysiloxane diblock copolymers.

Iron-containing nanostructures produced from various self-assembled poly(ferrocenylsilane)-block-polysiloxane thin films are catalytically active for the initiation and growth of high density, small diameter carbon nanotubes (CNTs). Moreover, the tube diameter and density can be tuned by adjusting the chain lengths of the block copolymer. Iron-containing nanostructures from poly(ferrocenylmethylethylsilane)-b-poly(methylvinylsiloxane) polymer with 25 repeat units of an iron-containing segment and 265 repeat units of a non-iron-containing segment are able to produce CNTs with diameters around or less than 1 nm. Lithographically selective growth of CNTs across a large surface area has been demonstrated using this polymer system. Under the same growth condition, it has been found that the yield of defect-free CNTs varies with the size of the catalytically active nanostructures, which are dictated by the chain lengths of the two blocks. This result indicates that, for a specific-sized catalyst nanocluster, a unique set of growth conditions is required for synthesizing high yield, defect-free CNTs. This finding further addresses the importance of using uniform-sized catalyst-containing nanostructures for consistently achieving high-yield and high-quality CNTs with a minimum number of defects and amount of amorphous carbon.

Journal Article↗
PubMed2006

Photocontrolled living polymerizations.

Living polymerizations involve the creation of polymer chains without significant irreversible chain transfer or chain termination. Such processes are widely used to access well-defined macromolecular materials with controlled architectures, such as block and star polymers. Although this concept was first realized for anionic polymerizations in the 1950s, many key recent advances have been made, most notably in the area of radical polymerization. Here, we report a living photopolymerization that involves photoexcited monomers. Exposure of metal-containing ferrocenophane monomers to Pyrex-filtered light from a mercury lamp (lambda>310 nm) or to bright sunlight in the presence of an anionic initiator leads to living polymerizations, in which the conversion and molecular weight of the resulting polymer can be controlled by the irradiation time. Photoirradiation selectively weakens the iron-cyclopentadienyl bond in the monomer, allowing the use of moderately basic and highly functional-group-tolerant initiators. The polymerization proceeds through attack of the initiator and propagating anion on the iron atom of the photoexcited monomer and, remarkably, the polymerization rate decreases with increasing temperature. Block copolymer formation is possible when the light source is alternately switched on and off in between sequential addition of different monomers, providing unprecedented, photocontrolled access to new types of functional polymers.

Journal Article↗
PubMed2006

Synthesis of ansa-[n]silacyclopentadienyl-cycloheptatrienyl-chromium complexes (n = 1, 2): novel precursors for polymers bearing chromium in the backbone.

Reaction of [(eta5-C5H4Li)(eta7-C7H6Li)Cr]tmeda with a variety of dialkyl(dichloro)silanes in aliphatic solvents afforded the corresponding [1]silatrochrocenophanes. Structural characterization by X-ray diffraction analysis of the [1]silatrochrocenophanes bearing Me2Si, (iPr)2Si, and silacyclobutane bridges revealed tilt angles alpha of 15.56(12) degrees , 15.8(1) degrees , and 16.33(17) degrees , respectively. Analogously, a [2]silatrochrocenophane (6) was prepared in excellent yield by reaction of [(eta5-C5H4Li)(eta7-C7H6Li)Cr]tmeda with 1,2-dichloro-1,1,2,2-tetramethyldisilane. This complex also was characterized structurally and exhibited a tilt angle alpha of 2.60(15) degrees. The [1]silatrochrocenophane bearing the Me2Si bridge underwent facile and regioselective carbon-silicon bond cleavage with [Pt(PEt3)4] to give a very high yield of an oxidative addition product. The ring-opening polymerization of these novel [1]silatrochrocenophanes afforded ring-opened chromium-based polymers.

Journal Article↗
PubMed2006

Metallopolymer-peptide conjugates: synthesis and self-assembly of polyferrocenylsilane graft and block copolymers containing a beta-sheet forming Gly-Ala-Gly-Ala tetrapeptide segment.

We describe the synthesis and self-assembly of two beta-sheet forming metallopolymer-peptide conjugates. The ability of the oligotetrapeptide sequence Gly-Ala-Gly-Ala (GAGA) to form antiparallel beta-sheets was retained in PFS-b-AGAG (PFS = polyferrocenylsilane) and PFS-g-AGAG conjugates with block and graft architectures, respectively. In the solid state, DSC experiments suggest a phase separation between the peptide and PFS domains. In toluene, PFS-b-AGAG interestingly forms a fibrous network which consists of a core containing the self-assembled antiparallel beta-sheet peptide and a corona of organometallic PFS. The self-assembly of the peptide into antiparallel beta-sheets is the driving force for the fiber formation, whereas PFS prevents uncontrolled lateral aggregation of the fibers. The use of an oligopeptide to self-assemble an otherwise random coiled organometallic polymer may be a useful strategy to enhance nanostructure formation. In the cases described here, the conjugates may be used to create nanopatterned ceramics, and the redox properties of the resulting supramolecular aggregates are of significant interest.

Molecular Conformation↗
PubMed2005

Phosphorescence quenching of dyes adsorbed to silica thin-layer chromatography plates.

We describe photoluminescence (PL) quenching experiments by oxygen for a series of transition metal dyes adsorbed to commercial silica thin-layer chromatography plates. These TLC plates have been used by others as rapidly responding PL pressure sensors. The quenching kinetics show interesting differences from the behavior of the same dyes adsorbed to the more well-defined surfaces of SBA-15 mesoporous silica particles adsorbed to a thin layer-by-layer polymer film as reported in Chem. Mater. 2005, 17, 3160. The pore size and the pore size distribution are much larger for the TLC silica than for the mesoporous silica. On the TLC silica, the dye PL decay profiles show smaller deviations from an exponential form. One sees larger differences between the intensity and lifetime Stern-Volmer plots, and most surprisingly, the dyes on the surface of the TLC silica are about three times more sensitive to quenching by oxygen.

Journal Article↗
PubMed2005

Reversible skeletal transmetalations of inorganic rings: isolation of aluminatophosphazenes, a zwitterionic phosphazene, and a donor-stabilized alumazine-phosphazene hybrid cation.

Synthesis of the cyclic aluminatophosphazene ring N(PCl2NMe)2AlMeCl (5) has been achieved via a skeletal transmetalation reaction between AlMe3 and the boratophosphazene N(PCl2NMe)2BCl2 (1). Reaction of 5 with various halogenated Lewis acids such as GaCl3 yielded the fully chlorinated aluminum heterocycle N(PCl2NMe)2AlCl2 (8) through a methyl-halogen exchange process. In contrast, treatment of 5 with excess AlMe3 resulted in complete methylation at aluminum to give N(PCl2NMe)2AlMe2 (6). Compound 5 was reacted with various Ag+ salts with weakly coordinating anions, including Ag[OSO2CF3], which afforded the triflate-substituted heterocycle N(PCl2NMe)2AlMe(OSO2CF3) (9). The reaction of 5 with Ag[BF4] surprisingly produced the previously known fluorinated boratophosphazene N(PCl2NMe)2BF2 (10). The transformation of 1 to 5 and then to 10 represents a rare, formally reversible, skeletal transmetalation process involving boron and aluminum. Treatment of 5 with Ag[PF6] led to the insertion of phosphorus in place of aluminum to form the novel zwitterionic fluorinated phosphorus(V) heterocycle N(PCl2NMe)2PF4 (11). The ethyl-substituted aluminatophosphazene N(PCl2NMe)2AlMeEt (14) reacted cleanly with a 1:1 mixture of [Ph3C][B(C6F5)4] and THF to give the novel donor-stabilized alumazine-phosphazene hybrid cation, [7.THF]+, as the [B(C6F5)4]- salt [N(PCl2NMe)2AlMe.THF][B(C6F5)4] (15).

Journal Article↗
PubMed2005

Block copolymers under periodic, strong three-dimensional confinement.

In this communication we study the influence of strong 3D confinement on the self-assembly of diblock copolymers containing a polyferrocenylsilane metallopolymer segment. Both silica colloidal crystals and silica inverse colloidal crystals, having nanometer-scale interconnected pore networks, are used as molds to direct the self-assembly. Unusual morphologies, such as concentric shells and branched lamellae, result from the interaction of the polymer with the high surface area topologically periodic templates.

Journal Article↗
PubMed2005

Rhodium-catalyzed dehydrocoupling of fluorinated phosphine-borane adducts: synthesis, characterization, and properties of cyclic and polymeric phosphinoboranes with electron-withdrawing substituents at phosphorus.

The dehydrocoupling of the fluorinated secondary phosphine-borane adduct R2PH.BH3 (R = p-CF3C6H4) at 60 degrees C is catalyzed by the rhodium complex [{Rh(mu-Cl)(1,5-cod)}2] to give the four-membered chain R2PH-BH2-R2P-BH3. A mixture of the cyclic trimer [R2P-BH2]3 and tetramer [R2P-BH2]4 was obtained from the same reaction at a more elevated temperature of 100 degrees C. The analogous rhodium-catalyzed dehydrocoupling of the primary phosphine-borane adduct RPH2.BH3 at 60 degrees C gave the high molecular weight polyphosphinoborane polymer [RPH-BH2]n (Mw = 56,170, PDI = 1.67). The molecular weight was investigated by gel permeation chromatography and the compound characterized by multinuclear NMR spectroscopy. Interestingly, the electron-withdrawing fluorinated aryl substituents have an important influence on the reactivity as the dehydrocoupling process occurred efficiently at the mildest temperatures observed for phosphine-borane adducts to date. Thin films of polymeric [RPH-BH2]n (R = p-CF3C6H4) have also been shown to function as effective negative-tone resists towards electron beam (e-beam) lithography (EBL). The resultant patterned bars were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM) and time-of-flight secondary ion mass spectrometry (TOF-SIMS).

Journal Article↗
PubMed2005

Photochemically and thermally tunable planar defects in colloidal photonic crystals.

We report a bottom-up synthesis of a photochemically and thermally active azobenzene-based polyelectrolyte multilayer (PEM) planar defect embedded in a colloidal photonic crystal (CPC). Both photoisomerization and thermal cycling lead to a precise tuning of an intragap transmitting state induced by the PEM structural defect.

Journal Article↗
PubMed2005

Redox-induced synthesis and encapsulation of metal nanoparticles in shell-cross-linked organometallic nanotubes.

A new approach to encapsulate silver nanoparticles inside block copolymer nanotubes is reported and involves an in situ redox reaction between a polyferrocenylsilane (PFS) inner wall and silver ions. Partial preoxidation of the PFS domains was found to be a key step for the efficient formation of one-dimensional arrays of silver nanoparticles confined within the nanotubes.

Ferrous Compounds↗
PubMed2005

Poisoning of heterogeneous, late transition metal dehydrocoupling catalysts by boranes and other group 13 hydrides.

Borane reagents are widely used as reductants for the generation of colloidal metals. When treated with a variety of heterogeneous catalysts such as colloidal Rh, Rh/Al2O3, and Rh(0) black, BH3.THF (THF = tetrahydrofuran) was found to generate H2 gas with the concomitant formation of a passivating boron layer on the surface of the Rh metal, thereby acting as a poison and rendering the catalyst inactive toward the dehydrocoupling of Me2NH.BH3. Analogous poisoning effects were also detected for (i) colloidal Rh treated with other species containing B-H bonds such as [HB-NH]3, or Ga-H bonds such as those present in GaH3.OEt2, (ii) colloidal Rh that was generated from Rh(I) and Rh(III) salts using borane or borohydrides as reductants, and (iii) for other metals such as Ru and Pd. In contrast, analogous poisoning effects were not detected for the catalytic hydrogenation of cyclohexene using Rh/Al2O3 or the Pd-catalyzed Suzuki cross-coupling of PhB(OH)2 and PhI. These results suggest that although this poisoning behavior is not a universal phenomenon, the observation that such boron layers are formed and surface passivation may exist needs to be carefully considered when borane reagents are used for the generation of metal colloids for catalytic or materials science applications.

Journal Article↗
PubMed2005

Ring-opening protonolysis of sila[1]ferrocenophanes as a route to stabilized silylium ions.

The ring-opening reactions of a series of sila[1]ferrocenophanes with protic acids of anions with various degrees of noncoordinating character have been explored. Ferrocenyl-substituted silyl triflates FcSiMe2OTf (5 a) and Fc(3)SiOTf (5 b) (Fc=(eta5-C5H4)Fe(eta5-C5H5)) were synthesized by means of HOTf-induced ring-opening protonolysis of strained sila[1]ferrocenophanes fcSiMe2 (3 a) and fcSiFc2 (3 b) (fc=(eta5-C5H4)2Fe). Reaction of 3 a and 3 b with HBF4 yielded fluorosubstituted ferrocenylsilanes FcSiMe2F (6 a) and Fc3SiF (6 b) and suggested the intermediacy of a highly reactive silylium ion capable of abstracting F- from the [BF4]- ion. Generation of the solvated silylium ions [FcSiMe2THF]+ (7a+), [Fc3SiTHF]+ (7b+) and [FcSiiPr2OEt2]+ (7c+) at low temperatures, by reaction of the corresponding sila[1]ferrocenophanes (3 a, 3 b, and fcSiiPr2 (3 c), respectively) with H(OEt2)(S)TFPB (S=Et2O or THF; TFPB=tetrakis[3,5-bis(trifluoromethyl)phenyl]borate) was monitored by using low-temperature 1H, 13C, and 29Si NMR spectroscopy. In situ reaction of 7a+, 7b+, and 7c+ with excess pyridine generated [FcSiMe2py]+ (8a+), [Fc3Sipy]+ (8b+), and [FcSiiPr2py]+ (8c+), respectively, as observed by 1H, 13C, and 29Si NMR spectroscopy. A preparative-scale reaction of 3 b with H(OEt2)(THF)TFPB at -60 degrees C and subsequent addition of excess pyridine gave isolable red crystals of 8b-[TFPB]CHCl3, which were characterized by 1H and 29Si NMR spectroscopy as well as by single-crystal X-ray diffraction.

Crystallography, X-Ray↗
PubMed2005

Highly metallized polymers: synthesis, characterization, and lithographic patterning of polyferrocenylsilanes with pendant cobalt, molybdenum, and nickel cluster substituents.

High molecular weight, soluble, air- and moisture-stable, highly metallized (>25 wt% metal) polyferrocenylsilanes (PFS) [Fe(eta-C5H4)2Si(Me){Co2(CO)6C2Ph}]n (Co-PFS), [Fe(eta-C5H4)2Si(Me){Mo2-Cp2(CO)4C2Ph}]n (Mo-PFS), and [Fe(eta-C5H4)2Si(Me){Ni2Cp2C2Ph}]n (Ni-PFS) containing pendant cobalt, molybdenum, and nickel clusters, respectively, have been prepared via macromolecular clusterization of an acetylide-substituted PFS [Fe(eta-C5H4)2Si(Me)C(triple bond)CPh]n with [Co(2)(CO)8], [{MoCp(CO)(2)}2], or [{NiCp(CO)}2]. The extent of clusterization achieved was in the range of 70-75%. All three highly metallized polymers were demonstrated to function as negative-tone resists in electron-beam lithography, while Co-PFS and Mo-PFS were successfully patterned by UV-photolithography, allowing the fabrication of micron-sized bars, dots, and lines. These studies suggest that the highly metallized polymers may be useful in the fabrication of patterned arrays of alloy nanoparticles for both materials science and catalytic applications.

Journal Article↗
PubMed2005

Tailoring photonic crystals with nanometer-scale precision using polyelectrolyte multilayers.

In this paper, we describe a rapid, accurate, and convenient method for postsynthetically tuning the optical properties of colloidal photonic crystals. High quality photonic crystal films are first synthesized and then coated iteratively with layers of water-soluble polyelectrolytes. The coating process results in nanometer-scale shifts in the photonic stop band, a process which has been monitored by theoretical modeling. The results suggest a fundamentally different, reproducible layering mechanism inside the confined spaces of the colloidal crystal where polyelectrolyte multilayers are less densely packed.

Letter↗