PubMed Health⌕ Search

Biomedical subjects

Igor L Moudrakovski

Publications and source records attributed to Igor L Moudrakovski.

12 recordsLinked to original sources
PubMed2007

(39)K NMR of solid potassium salts at 21 T: effect of quadrupolar and chemical shift tensors.

39K Solid State NMR spectra (static and magic angle spinning (MAS)) on a set of potassium salts measured at 21.14 T show that the chemical shift range for K(+) ions in diamagnetic salts is well in excess of 100 ppm contrary to previous assumptions that it was quite small. Inequivalent potassium sites in crystals can be resolved through differences in chemical shifts, with chemically similar sites showing differences of over 10 ppm. The quadrupolar coupling constants obtained from MAS and solid echo experiments on powders cover the range from zero for potassium in cubic environments in halides to over 3 MHz for the highly asymmetric sites in K2CO3. Although the quadrupolar effects generally dominate the 39K spectra, in several instances, we have observed subtle but significant contributions of chemical shift anisotropy with values up to 45 ppm, a first such observation. Careful analysis of static and MAS spectra allows the observation of the various chemical shift and quadrupole coupling tensor components as well as their relative orientations, thereby demonstrating that high-field 39K NMR spectroscopy in the solid state has a substantial sensitivity to the local environment with parameters that will be of considerable value in materials characterization and electronic structure studies.

Anisotropy↗
PubMed2006

Hydrate kinetics study in the presence of nonaqueous liquid by nuclear magnetic resonance spectroscopy and imaging.

The dynamics of methane hydrate growth and decomposition were studied by nuclear magnetic resonance (NMR) spectroscopy and imaging (MRI). Three well-known large molecule guest substances (LMGS) were used as structure H hydrate formers: 2,2-dimethylbutane (NH), methylcyclohexane (MCH), tert-butyl methyl ether (TBME). In addition, the impact of a non-hydrate former (n-heptane/nC7) was studied. The methane diffusion and hydrate growth were monitored by recording the 2H NMR spectra at 253 K and approximately 4.5 MPa for 20 h. The results revealed that methane diffuses faster in TBME and NH, slower in nC7, and slowest in MCH. The TBME system gives the fastest hydrate formation kinetics followed by NH, MCH, and nC7. The conversion of water into hydrate was also observed. The imaging study showed that TBME has a strong affinity toward ice, which is not the case for the NH and MCH systems. The degree of ice packing was also found to affect the LMGS distribution between ice particles. Highly packed ice increases the mass transfer resistance and hence limits the contact between LMGS and ice. It was also found that "temperature ramping" above the ice point improves the conversion significantly. Finally, hydrates were found to dissociate quickly within the first hour at atmospheric pressure and subsequently at a much slower rate. Methane dissolved in LMGS was also seen. The residual methane in hydrate phase and dissolved in LMGS phase explain the faster kinetics during hydrate re-formation.

Journal Article↗
PubMed2006

Micropores in crystalline dipeptides as seen from the crystal structure, He pycnometry, and 129Xe NMR spectroscopy.

Eight crystalline dipeptides were studied: AV (Ala-Val), VA (Val-Ala), AI (Ala-Ile), VV (Val-Val), IA (Ile-Ala), IV (Ile-Val), VI (Val-Ile), and LS (Leu-Ser) (all LL isomers). The first seven form an isostructural series (space group P6(1)), whereas LS has a different structure (P6(5)). All structures display H-bonded tubular assemblies of the dipeptide molecules resulting in open ultramicropores in the form of isolated one-dimensional (1D) channels. The total porosity of the materials ranges from 4 to 12% (micropore volume from 0.04 to 0.12 cm(3)/g). Calculations based on the crystal structures, He pycnometry, and solid-state (129)Xe NMR methods were used to obtain a comprehensive description of the geometry and properties of the micropores. The following order was established for the channel diameter: AV > VA > AI > VV > IA > IV > VI, with >5 A for AV and <4 A for VI; LS is close to AI. The observed sorption behavior cannot be described adequately based on the crystal structure and can only be understood if one takes into account the dynamics of the host matrix. The pores are chiral, with the center of the channel describing a right-handed helix (left-handed for LS). The following order was established for the channel helicity: VA > IA > IV > AV approximately AI approximately VV > VI > LS, with a helix diameter of approximately 2 A for VA, IA, and IV and approximately 1 A or less for the remaining dipeptides. A comparison of the dipeptides studied with other supramolecular materials is given and the potential for applications is discussed.

Crystallography, X-Ray↗
PubMed2005

Nuclear magnetic resonance studies of resorcinol-formaldehyde aerogels.

In this article, we report a detailed study of resorcinol-formaldehyde (RF) aerogels prepared under different processing conditions, [resorcinol]/[catalyst] (R/C) ratios in the starting sol-gel solutions, using continuous flow hyperpolarized (129)Xe NMR in combination with solid-state (13)C and two-dimensional wide-line separation (2D-WISE) NMR techniques. The degree of polymerization and the mobility of the cross-linking functional groups in RF aerogels are examined and correlated with the R/C ratios. The origin of different adsorption regions is evaluated using both coadsorption of chloroform and 2D EXSY (129)Xe NMR. A hierarchical set of Xe exchange processes in RF aerogels is found using 2D EXSY (129)Xe NMR. The exchange of Xe gas follows the sequence (from fastest to slowest): mesopores with free gas, gas in meso- and micropores, free gas with micropores, and, finally, among micropore sites. The volume-to-surface-area (V(g)/S) ratios for aerogels are measured for the first time without the use of geometric models. The V(g)/S parameter, which is related both to the geometry and the interconnectivity of the pore space, has been found to correlate strongly with the R/C ratio and exhibits an unusually large span: an increase in the R/C ratio from 50 to 500 results in about a 5-fold rise in V(g)/S.

Journal Article↗
PubMed2005

Distribution of gallium nanocrystals in Ga/MCM-41 mesocomposites by continuous-flow hyperpolarized 129Xe NMR spectroscopy.

The distribution of gallium nanocrystals in mesoporous MCM-41 host were analyzed by continuous-flow hyperpolarized 129Xe NMR spectroscopy. In contrast to unclear TEM images for the high metal contents, laser-polarized 129Xe probe can detect the whole distribution of gallium in the MCM-41 host. It is found that gallium nanocrystals are included in the mesochannels of MCM-41; a part of them also remains in the interparticle voids. The distribution of gallium metal in MCM-41 is heterogeneous. Not all the mesochannels host metallic gallium even at a high gallium loading of 65.1 wt %. Variable temperature measurements can provide information on the xenon adsorption parameters. This approach opens a sensitive way to probe the distribution of high content species in porous host materials.

Journal Article↗
PubMed2005

Tuning clathrate hydrates for hydrogen storage.

The storage of large quantities of hydrogen at safe pressures is a key factor in establishing a hydrogen-based economy. Previous strategies--where hydrogen has been bound chemically, adsorbed in materials with permanent void space or stored in hybrid materials that combine these elements--have problems arising from either technical considerations or materials cost. A recently reported clathrate hydrate of hydrogen exhibiting two different-sized cages does seem to meet the necessary storage requirements; however, the extreme pressures (approximately 2 kbar) required to produce the material make it impractical. The synthesis pressure can be decreased by filling the larger cavity with tetrahydrofuran (THF) to stabilize the material, but the potential storage capacity of the material is compromised with this approach. Here we report that hydrogen storage capacities in THF-containing binary-clathrate hydrates can be increased to approximately 4 wt% at modest pressures by tuning their composition to allow the hydrogen guests to enter both the larger and the smaller cages, while retaining low-pressure stability. The tuning mechanism is quite general and convenient, using water-soluble hydrate promoters and various small gaseous guests.

Journal Article↗
PubMed2005

Efficient recovery of CO2 from flue gas by clathrate hydrate formation in porous silica gels.

Thermodynamic measurements and NMR spectroscopic analysis were used to show that it is possible to recover CO2 from flue gas by forming a mixed hydrate that removes CO2 preferentially from CO2/N2 gas mixtures using water dispersed in the pores of silica gel. Kinetic studies with 1H NMR microimaging showed that the dispersed water in the silica gel pore system reacts readily with the gas, thus obviating the need for a stirred reactor and excess water. Hydrate phase equilibria for the ternary CO2-N2-water system in silica gel pores were measured, which show that the three-phase hydrate-water-rich liquid-vapor equilibrium curves were shifted to higher pressures at a specific temperature when the concentration of CO2 in the vapor phase decreased. 13C cross-polarization NMR spectral analysis and direct measurement of the CO2 content in the hydrate phase suggested that the mixed hydrate is structure I at gas compositions of more than 10 mol % CO2, and that the CO2 molecules occupy mainly the more abundant 5(12)6(2) cages. This makes it possible to achieve concentrations of more than 96 mol % CO2 gas in the product after three cycles of hydrate formation and dissociation. 1H NMR microimaging showed that hydrate yields of better than 85%, based on the amount of water, could be obtained in 1 h when a steady state was reached, although approximately 90% of this yield was achieved after approximately 20 min of reaction time.

Air Pollutants↗
PubMed2004

Distribution and modification of sorption sites in amphiphilic calixarene-based solid lipid nanoparticles from hyperpolarized 129Xe NMR spectroscopy.

The site distribution and accessibility in amphiphilic calixarenes-based solid lipid nanoparticles were determined as a function of lipid chain length using in situ 129Xe NMR spectroscopy with flowing hyperpolarized Xe gas. The study illustrates that host cavities in as-prepared materials are increasingly occluded by the lipid chain for compounds with chain lengths from C6 to C12 and are almost completely occluded for C14 and C16 chain lengths. Host cavities present at the surface of the particles are still accessible to small atoms (xenon) and organic molecules (methylene chloride, etc). The Xe spectra show that the accessible void space can be increased remarkably by exposure of the particle surface to suitably sized guest molecules that appear to displace the occluding hydrocarbon chains from the host cavities by competitive adsorption. This postsynthesis treatment thus modifies the state of self-assembly and improves sorption capability. The HP Xe NMR approach presented is suitable for small samples (a few milligrams) of SLNs, likely also for other biomaterials such as vesicles, model membranes, etc.

Journal Article↗
PubMed2003

Thermally programmable gas storage and release in single crystals of an organic van der Waals host.

A single crystal of a low density form of guest-free p-tert-butylcalix[4]arene can take up and release small guest molecules by controlling the temperature and pressure without changing the structure. Using NMR spectroscopy with flowing hyperpolarized xenon, we have shown that at room temperature access of xenon to the pore system is difficult, whereas it is relatively easy at 100 degrees C. There are good prospects for simple van der Waals materials such as the title material to be used as programmable zeolite mimics.

Journal Article↗