Biomedical subjects

Ijad Madisch

Publications and source records attributed to Ijad Madisch.

7 recordsLinked to original sources

PubMed2007

Comparison of hydrogels in the in vivo formation of tissue-engineered bone using mesenchymal stem cells and beta-tricalcium phosphate.

Availability of grafts and morbidity at the donor site limit autologous transplantation in patients requiring bone reconstruction. A tissue-engineering approach can overcome these limitations by producing bone-like tissue of custom shape and size from isolated cells. Several hydrogels facilitate osteogenesis on porous scaffolds; however, the relative suitability of various hydrogels has not been rigorously assessed. Fibrin glue, alginate, and collagen I hydrogels were mixed with swine bone marrow-derived differentiated mesenchymal stem cells (MSCs), applied to 3-dimensionally printed porous beta-tricalcium phosphate (beta-TCP) scaffolds and implanted subcutaneously in nude mice. Although noninvasive assessment of osteogenesis in 3 dimensions is desirable for monitoring new bone formation in vivo, correlations with traditional histological and mechanical testing need to be established. High-resolution volumetric computed tomography (VCT) scanning, histological examination, biomechanical compression testing, and osteonectin (ON) expression were performed on excised scaffolds after 1, 2, 4, and 6 weeks of subcutaneous implantation in mice. Statistical correlation analyses were performed between radiological density, stiffness, and ON expression. Use of collagen I as a hydrogel carrier produced superior bone formation at 6 weeks, as demonstrated using VCT scanning with densities similar to native bone and the highest compression values. Continued contribution of the seeded MSCs was demonstrated using swine-specific messenger ribonucleic acid probes. Radiological density values correlated closely with the results of histological and biomechanical testing and ON expression. High-resolution VCT is a promising method for monitoring osteogenesis.

Animals↗

PubMed2006

An outbreak of epidemic keratoconjunctivitis caused by a new intermediate adenovirus 22/H8 identified by molecular typing.

In a 4-week period, 12 patients contracted adenoviral keratoconjunctivitis. Eight of these patients had visited the same ophthalmologist's practice before onset of symptoms. Adenovirus was detected in swab specimens obtained from 9 patients. Sequence-based typing of 2 isolates revealed type 22/H8. This is, to our knowledge, the first report of a keratoconjunctivitis outbreak caused by an intermediate adenovirus type 22/H8.

Adenoviridae↗

PubMed2006

A rapid quantitative PCR-based assay for testing antiviral agents against human adenoviruses demonstrates type specific differences in ribavirin activity.

Human adenovirus (HAdV) infections are increasingly frequent and potentially fatal as a disseminated disease in highly immunocompromised patients. Determining the in vitro sensitivity of HAdV to antiviral agents is not an easy task because HAdV CPE reduction assays are difficult to interpret and may take more than 1 week. We developed a phenotypic assay for testing the antiviral activity during the first round of replication using HAdV DNA concentration as an objective readout within 30 h. After evaluating the assay with cidofovir, we focused on determining the antiviral of ribavirin against different HAdV serotypes because clinical response of HAdV infections towards ribavirin treatment varied considerably. Several HAdV prototypes (1, 2, 5, 11, 31, 34, 48) associated with disseminated infections and clinical isolates were tested. Predominating HAdV of species C were more sensitive to ribavirin (HAdV-2 and -5: EC(50)<10 microM, EC(99) 111 and 104 microM, respectively) than HAdV of other species, for example HAdV-31 (EC(50) 56 microM, EC(99)>500 microM). Differential ribavirin sensitivity of HAdV types may contribute to the variable outcome of ribavirin therapy. Rapid screening of antiviral agents with the rapid qPCR-based assay against a multitude of HAdV serotypes may also facilitate development of future antiviral agents.

Adenovirus Infections, Human↗

PubMed2006

Molecular identification of adenovirus sequences: a rapid scheme for early typing of human adenoviruses in diagnostic samples of immunocompetent and immunodeficient patients.

Precise typing of human adenoviruses (HAdV) is fundamental for epidemiology and the detection of infection chains. As only few of the 51 adenovirus types are associated with life- threatening disseminated diseases in immunodeficient patients, detection of one of these types may have prognostic value and lead to immediate therapeutic intervention. A recently published molecular typing scheme consisting of two steps (sequencing of a generic PCR product closely adjacent to loop 1 of the main neutralization determinant epsilon, and for species HAdV-B, -C, and -D the sequencing of loop 2 [Madisch et al., 2005]) was applied to 119 clinical samples. HAdV DNA was typed unequivocally even in cases of culture negative samples, for example in immunodeficient patients before HAdV causes high virus loads and disseminated disease. Direct typing results demonstrated the predominance of HAdV-1, -2, -5, and -31 in immunodeficient patients suggesting the significance of the persistence of these viruses for the pathogenesis of disseminated disease. In contrast, HAdV-3 predominated in immunocompetent patients and cocirculation of four subtypes was demonstrated. Typing of samples from a conjunctivitis outbreak in multiple military barracks demonstrated various HAdV types (2, 4, 8, 19) and not the suspected unique adenovirus etiology. This suggests that our molecular typing scheme will be also useful for epidemiological investigations. In conclusion, our two-step molecular typing system will permit the precise and rapid typing of clinical HAdV isolates and even of HAdV DNA in clinical samples without the need of time-consuming virus isolation prior to typing.

Adenoviridae↗

PubMed2005

Hydrogel-beta-TCP scaffolds and stem cells for tissue engineering bone.

Trabecular bone is a material of choice for reconstruction after trauma and tumor resection and for correction of congenital defects. Autologous bone grafts are available in limited shapes and sizes; significant donor site morbidity is another major disadvantage to this approach. To overcome these limitations, we used a tissue engineering approach to create bone replacements in vitro, combining bone-marrow-derived differentiated mesenchymal stem cells (MSCs) suspended in hydrogels and 3-dimensionally printed (3DP) porous scaffolds made of beta-tricalcium-phosphate (beta-TCP). The scaffolds provided support for the formation of bone tissue in collagen I, fibrin, alginate, and pluronic F127 hydrogels during culturing in oscillating and rotating dynamic conditions. Histological evaluation including toluidine blue, alkaline phosphatase, and von Kossa staining was done at 1, 2, 4, and 6 weeks. Radiographic evaluation and high-resolution volumetric CT (VCT) scanning, expression of bone-specific genes and biomechanical compression testing were performed at 6 weeks. Both culture conditions resulted in similar bone tissue formation. Histologically collagen I and fibrin hydrogels specimens had superior bone tissue, although radiopacities were detected only in collagen I samples. VCT scan revealed density values in all but the Pluronic F127 samples, with Houndsfield unit values comparable to native bone in collagen I and fibrin glue samples. Expression of bone-specific genes was significantly higher in the collagen I samples. Pluronic F127 hydrogel did not support formation of bone tissue. All samples cultured in dynamic oscillating conditions had slightly higher mechanical strength than under rotating conditions. Bone tissue can be successfully formed in vitro using constructs comprised of collagen I hydrogel, MSCs, and porous beta-TCP scaffolds.

Alginates↗

PubMed2005

Phylogenetic analysis of the main neutralization and hemagglutination determinants of all human adenovirus prototypes as a basis for molecular classification and taxonomy.

Human adenoviruses (HAdV) are responsible for a wide spectrum of diseases. The neutralization epsilon determinant (loops 1 and 2) and the hemagglutination gamma determinant are relevant for the taxonomy of HAdV. Precise type identification of HAdV prototypes is crucial for detection of infection chains and epidemiology. epsilon and gamma determinant sequences of all 51 HAdV were generated to propose molecular classification criteria. Phylogenetic analysis of epsilon determinant sequences demonstrated sufficient genetic divergence for molecular classification, with the exception of HAdV-15 and HAdV-29, which also cannot be differentiated by classical cross-neutralization. Precise sequence divergence criteria for typing (<2.5% from loop 2 prototype sequence and <2.4% from loop 1 sequence) were deduced from phylogenetic analysis. These criteria may also facilitate identification of new HAdV prototypes. Fiber knob (gamma determinant) phylogeny indicated a two-step model of species evolution and multiple intraspecies recombination events in the origin of HAdV prototypes. HAdV-29 was identified as a recombination variant of HAdV-15 (epsilon determinant) and a speculative, not-yet-isolated HAdV prototype (gamma determinant). Subanalysis of molecular evolution in hypervariable regions 1 to 6 of the epsilon determinant indicated different selective pressures in subclusters of species HAdV-D. Additionally, gamma determinant phylogenetic analysis demonstrated that HAdV-8 did not cluster with -19 and -37 in spite of their having the same tissue tropism. The phylogeny of HAdV-E4 suggested origination by interspecies recombination between HAdV-B (hexon) and HAdV-C (fiber), as in simian adenovirus 25, indicating additional zoonotic transfer. In conclusion, molecular classification by systematic sequence analysis of immunogenic determinants yields new insights into HAdV phylogeny and evolution.

Adenovirus Infections, Human↗

PubMedDate not supplied

Inherently 3-dimensional method for measurement of computed tomographic resolution anisotropy.

OBJECTIVE: Current techniques to measure computed tomography (CT) spatial resolution use separate methods for in-plane and out-of-plane directions. The growing use of near-isotropic voxel size necessitates a new single method that inherently measures resolution in any direction. METHOD: We introduce a method using a set of numerous glass microspheres suspended in a small volume from which a mean sphere image is constructed. Projecting asymptotes after imaging different microsphere sets with decreasing diameters provides an inherently 3-dimensional measure of spatial resolution and anisotropy. We apply the method to both a flat-panel and multidetector CT scanner. RESULTS: The full-width at half-maximum from line profiles through mean sphere in transverse directions corresponds to known microsphere diameters. Increased longitudinal full-width at half-maximum corresponds to known anisotropy, which is larger for a multidetector CT scanner than for a flat-panel CT scanner. CONCLUSIONS: A new single method to measure CT resolution is inherently isotropic.

Anisotropy↗