PubMed Health⌕ Search

Biomedical subjects

Ipsita Roy

Publications and source records attributed to Ipsita Roy.

At least 19 recordsLinked to original sources
PubMed2006

Leveraging protein purification strategies in proteomics.

The proteomic studies, although, tend to be analytical in nature, yet many strategies of preparative protein purification can be usefully employed in such studies. This review points out the importance of purification techniques which are capable of dealing with samples which are suspensions rather than clear solution, e.g. aqueous two phase partitioning, three phase partitioning, expanded bed chromatography, etc. The review also outlines the potential of non-chromatographic techniques in dealing with fractionation of proteomes. Separation protocols which can deal with post-translationally modified (PTM) proteins are also considered.

Chromatography, Affinity↗
PubMed2006

Polyhydroxyalkanoates in Gram-positive bacteria: insights from the genera Bacillus and Streptomyces.

Gram-positive bacteria, notably Bacillus and Streptomyces, have been used extensively in industry. However, these microorganisms have not yet been exploited for the production of the biodegradable polymers, polyhydroxyalkanoates (PHAs). Although PHAs have many potential applications, the cost of production means that medical applications are currently the main area of use. Gram-negative bacteria, currently the only commercial source of PHAs, have lipopolysaccharides (LPS) which co-purify with the PHAs and cause immunogenic reactions. On the other hand, Gram- positive bacteria lack LPS, a positive feature which justifies intensive investigation into their production of PHAs. This review summarizes currently available knowledge on PHA production by Gram- positive bacteria especially Bacillus and Streptomyces. We hope that this will form the basis of further research into developing either or both as a source of PHAs for medical applications.

Acyltransferases↗
PubMed2006

Enhancing the synthetic utility of aldolase antibody 38C2.

Three-phase partitioning (TPP) treated aldolase antibody 38C2 was evaluated for aldol reaction between p-nitrobenzaldehyde and acetone to give 4-(4'-nitrophenyl)-4-hydroxy-2-butanone. While TPP-treated 38C2 transformed 65% of p-nitrobenzaldehyde, the untreated 38C2 gave only 24% transformation in 18 h at 25 degrees C. However, since TPP-treated 38C2 also gave an additional (unidentified) product, its synthetic utility was limited. Crosslinked aggregate of 38C2, however, gave the biocatalyst which gave a single product and could be reused at 40 degrees C five times without loss of activity.

Acetone↗
PubMed2006

Polyhydroxyalkanoate (PHA)/inorganic phase composites for tissue engineering applications.

Polyhydroxyalkanoates are emerging as a class of biodegradable polymers for applications in tissue engineering. Members of the polyhydroxyalkanoates family encompass a wide variety of materials, from hard and brittle materials to soft and elastomeric. Over the years, efforts have been made to extend the group of polyhydroxyalkanoates and to investigate their use in numerous biomedical applications, such as sutures, cardiovascular patches, wound dressings, guided tissue repair/regeneration devices, and tissue engineering scaffolds. Along with the development of polyhydroxyalkanoates, researchers have looked into the possibility of designing composites in combination with inorganic phases to further improve the mechanical properties, rate of degradation, and also impart bioactivity. Poly(3-hydroxybutyrate), poly(3-hydroxybutyrate-co-3-hydroxyvalerate), and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) are some of the polymers which have been studied extensively to fabricate composites in combination with hydroxyapatite, bioactive glass, and glass-ceramic fillers or coatings. This paper reviews international research carried out toward development of polyhydroxyalkanoates/inorganic phase composites in terms of systems investigated, microstructures, properties achieved, and applications, with special focus on tissue engineering scaffolds. A comparison between different composite systems developed in the past few years is presented. The paper also addresses the prospect of potential further development of polyhydroxyalkanoates/inorganic phase composites with optimized microstructure and properties for improved tissue engineering scaffolds.

Absorbable Implants↗
PubMed2005

One-step purification and characterization of an alkaline protease from haloalkaliphilic Bacillus sp.

An alkaline protease producer haloalkaliphilic bacteria (isolate Vel) was isolated from west coast of India. It was related to Bacillus pseudofirmus on the basis of 16S r RNA gene sequencing, lipid profile and other biochemical properties. The protease secreted by this bacteria was purified 10-fold with 82% yield by a single step method on Phenyl Sepharose 6 Fast Flow column. The apparent molecular mass based on the sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) was estimated to be 29 000 Da. The Km and Vmax towards caseinolytic activity were found to be 2 mg ml(-1) and 289.8 microg min(-1), respectively. The enzyme was active over the pH range of 8.5-12.0, the optimum being 10-11.0. The purified enzyme when kept at 45 degrees C and 50 degrees C for 40 min retained 92% and 85% protease activity, respectively. Effect of NaCl concentration on protease activity showed that the enzyme was slightly inhibited with high concentration of salt. The proteolytic activity was inhibited by PMSF, suggesting that the enzyme may belong to serine type protease. Interestingly, the activity was slightly enhanced with SDS (0.1%) and Triton X-100 (0.1%) but remained unaffected by Tween 80 (0.1%). The activity was affected by metal ions to varying extent. While Mn2+, Zn2+ and Mg2+ had no significant effect on protease activity, the enzyme was activated with Ca2+ (1 mM) and Cu2+ (5 mM). The stability of the enzyme in the presence of detergent components and surfactants is particularly attractive for its application in detergent industries.

Bacillus↗
PubMed2005

Purification and characterization of a solvent stable protease from Pseudomonas aeruginosa PseA.

A solvent tolerant Pseudomonas aeruginosa PseA strain was isolated from soil. It secreted a novel alkaline protease, which was stable and active in the presence of range of organic solvents, thus potentially useful for catalysis in non-aqueous media. The protease was purified 11.6-fold with 60% recovery by combination of ion exchange and hydrophobic interaction chromatography using Q-Sepharose and Phenyl Sepharose 6 Fast Flow matrix, respectively. The apparent molecular mass based on the sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) was estimated to be 35,000 Da. The enzyme was stable in the pH range of 6.0-9.0, the optimum being 8.0. The Km and Vmax towards caseinolytic activity were found to be 2.7 mg/ml and 3 micromol/min, respectively. The protease was most active at 60 degrees C and characterized as a metalloprotease because of its sensitivity to EDTA and 1,10-phenanthroline. It was tested positive for elastase activity towards elastin-orcein, thus appears to be an elastase, which is known as pseudolysin in other strains of P. aeruginosa. The protease withstands range of detergents, surfactants and solvents. It is stable and active in all the solvents having log P above 3.2, at least up to 72 h. These two properties make it an ideal choice for applications in detergent formulations and enzymatic peptide synthesis.

Bacterial Proteins↗
PubMed2005

Detection of native peptides as potent inhibitors of enzymes. Crystal structure of the complex formed between treated bovine alpha-chymotrypsin and an autocatalytically produced fragment, IIe-Val-Asn-Gly-Glu-Glu-Ala-Val-Pro-Gly-Ser-Trp-Pro-Trp, at 2.2 angstroms resolution.

Chymotrypsin is a prominent member of the family of serine proteases. The present studies demonstrate the presence of a native fragment containing 14 residues from Ile16 to Trp29 in alpha-chymotrypsin that binds to chymotrypsin at the active site with an exceptionally high affinity of 2.7 +/- 0.3 x 10(-11) M and thus works as a highly potent competitive inhibitor. The commercially available alpha-chymotrypsin was processed through a three phase partitioning system (TPP). The treated enzyme showed considerably enhanced activity. The 14 residue fragment was produced by autodigestion of a TPP-treated alpha-chymotrypsin during a long crystallization process that lasted more than four months. The treated enzyme was purified and kept for crystallization using vapour the diffusion method at 295 K. Twenty milligrams of lyophilized protein were dissolved in 1 mL of 25 mM sodium acetate buffer, pH 4.8. It was equilibrated against the same buffer containing 1.2 M ammonium sulfate. The rectangular crystals of small dimensions of 0.24 x 0.15 x 0.10 mm(3) were obtained. The X-ray intensity data were collected at 2.2 angstroms resolution and the structure was refined to an R-factor of 0.192. An extra electron density was observed at the binding site of alpha-chymotrypsin, which was readily interpreted as a 14 residue fragment of alpha-chymotrypsin corresponding to Ile-Val-Asn-Gly-Glu-Glu-Ala-Val-Pro-Gly-Ser-Trp-Pro-Trp(16-29). The electron density for the eight residues of the C-terminus, i.e. Ala22-Trp29, which were completely buried in the binding cleft of the enzyme, was of excellent quality and all the side chains of these eight residues were clearly modeled into it. However, the remaining six residues from the N-terminus, Ile16-Glu21 were poorly defined although the backbone density was good. There was a continuous electron density at 3.0 sigma between the active site Ser195 Ogamma and the carbonyl carbon atom of Trp29 of the fragment. The final refined coordinates showed a distance of 1.35 angstroms between Ser195 Ogamma and Trp29 C indicating the presence of a covalent linkage between the enzyme and the native fragment. This meant that the enzyme formed an acyl intermediate with the autodigested fragment Ile16-Trp29. In addition to the O-C covalent bond, there were several hydrogen bonds and hydrophobic interactions between the enzyme and the native fragment. The fragment showed a high complementarity with the binding site of alpha-chymotrypsin and the buried part of the fragment matched excellently with the corresponding buried part of Turkey ovomucoid inhibitor of alpha-chymotrypsin.

Amino Acid Sequence↗
PubMed2004

Simultaneous refolding/purification of xylanase with a microwave treated smart polymer.

Affinity precipitation with a smart polymer, Eudragit S-100 (a methyl methacrylate polymer), was exploited for simultaneous refolding and purification of xylanase. Affinity precipitation consisted of this reversibly soluble-insoluble polymer-binding xylanase selectively. The complex was precipitated by lowering the pH and xylanase was eluted off the polymer using 1 M NaCl. For refolding experiments, the commercial preparation of Aspergillus niger xylanase was denatured with 8 M urea. Addition of microwave irradiated Eudragit S-100 and affinity precipitation led to recovery of 96% enzyme activity by refolding. Simultaneously, the enzyme was purified 45 times. Thermally inactivated preparation, when subjected to similar steps, led to 95% recovery of enzyme activity with 42-fold purification. The strategy has the potential for recovering pure proteins in active forms from overexpressed proteins, which generally form inclusion bodies in E. coli.

Affinity Labels↗
PubMed2004

Three-phase partitioning for simultaneous renaturation and partial purification of Aspergillus niger xylanase.

Three-phase partitioning (TPP) is carried out by mixing ammonium sulfate and t-butanol to obtain organic phase, interfacial precipitate and aqueous phase. It is shown that TPP of an 8 M urea/100 mM dithiothreitol-denatured xylanase preparation resulted in simultaneous renaturation and purification. This integrated novel approach gave recovery of 93% enzyme activity with 21-fold purification. The implications of this in the context of recovering activity from inclusion bodies are discussed.

Aspergillus niger↗
PubMed2004

Obtaining higher transesterification rates with subtilisin Carlsberg in nonaqueous media.

Three phase partitioning (protein precipitate obtained as an interfacial layer between lower aqueous and upper t-butanol phases, formed by the addition of ammonium sulphate and t-butanol to the aqueous solution of protein) followed by lyophilization in the presence of two-component excipient resulted in 400-480x increases in transesterification activity of lyophilized powders of subtilisin Carlsberg, depending on the solvent. The three phase partitioned enzyme, 'dried' by washing with butanol, gave 3-4x higher rates (depending on the solvent used) than the enzyme preparation dried by lyophilization in the presence of two-component excipient system.

Catalysis↗
PubMed2004

Smart biocatalysts: design and applications.

Smart materials respond to chemical or physical changes in their environment in a predictable fashion. One class of such materials are smart polymers which can be used to design reversibly soluble-insoluble biocatalysts. One important advantage of such soluble polymer enzyme conjugates is in bioconversion of macromolecular or insoluble substrates. In addition, they share the advantage of reusability with conventional immobilized enzymes. Stimuli that are used to "recover" smart polymer - enzyme conjugates for reuse include changes in pH, temperature, ionic strength and addition of chemical species like calcium. In addition to these, enzymes linked to photoresponsive polymers have also been described in the literature. Both adsorption and covalent coupling have been used to create such polymer conjugates. End-group conjugation and site-specific conjugation are recently described strategies to obtain biocatalysts with better designs for solving mass transfer constraints. Some important applications of such smart biocatalysts are hydrolysis of starch, cellulose and proteins. Work has also been carried out on hydrolysis of pectins and xylans. All the above applications involve hydrolysis and are hence carried out in aqueous media. For synthetic applications such as synthesis of peptides, some photoresponsive polymers linked to proteases have recently been described.

Biological Products↗
PubMed2004

Freeze-drying of proteins: some emerging concerns.

Freeze-drying (lyophilization) removes water from a frozen sample by sublimation and desorption. It can be viewed as a three-step process consisting of freezing, primary drying and secondary drying. While cryoprotectants can protect the protein from denaturation during early stages, lyoprotectants are needed to prevent protein inactivation during drying. The structural changes as a result of freeze-drying have been investigated, especially by FTIR (Fourier-transform IR) spectroscopy. In general, drying results in a decrease of alpha-helix and random structure and an increase in beta-sheet structure. In the case of basic fibroblast growth factor and gamma-interferon, enhanced FTIR showed large conformational changes and aggregation during freeze-drying, which could be prevented by using sucrose as a lyoprotectant. It is now well established that structural changes during freeze-drying are responsible for low activity of freeze-dried powders in nearly anhydrous media. Strategies such as salt activation can give 'activated' enzyme powders, e.g. salt-activated thermolysin-catalysed regioselective acylation of taxol to give a more soluble derivative for therapeutic use. In the presence of moisture, freeze-dried proteins can undergo disulphide interchange and other reactions which lead to inactivation. Such molecular changes during storage have been described for human insulin, tetanus toxoid and interleukin-2. Some successful preventive strategies in these cases have also been mentioned as illustrations. Finally, it is emphasized that freeze-drying is not an innocuous process and needs to be understood and used carefully.

Crystallization↗
PubMed2004

A smart bioconjugate of trypsin with alginate.

Alginate is a polymer of guluronic acid and mannuronic acid residues and is an inexpensive, nontoxic polysaccharide of marine origin. Trypsin was immobilized noncovalently on alginate with 100% retention of activity. The enzyme did not leach off the polymer even in the presence of 0.01 M HCl and Triton X-100 (0.2% vv(-1)). The V(max)/K(m) values did not change significantly on immobilization. There was 22% loss of activity in first cycle of pH change and after that the conjugate could be reused upto 4 precipitation cycles without any further loss of activity. This smart bioconjugate was also found to have better operational stability in the presence of casein than free enzyme. Fluorescence studies were carried out to probe structural changes upon immobilization.

Alginates↗
PubMed2004

Enzymes in organic media. Forms, functions and applications.

Enzyme catalysis in low water containing organic solvents is finding an increasing number of applications in diverse areas. This review focuses on some aspects which have not been reviewed elsewhere. Different strategies for obtaining higher activity and stability in such media are described. In this context, the damaging role of lyophilization and the means of overcoming such effects are discussed. Ultrasonication and microwave assistance are two emerging approaches for enhancing reaction rates in low water media. Control of water activity and medium engineering are two crucial approaches in optimization of catalytic behaviour in nonaqueous enzymology. Organometallics and synthesis/modification of polymers are two areas where nonaqueous enzymology can play a greater role in the coming years. The greater understanding of enzyme behaviour in nonaqueous media is expected to lead to larger and even more diverse kinds of applications.

Catalysis↗
PubMed2003

kappa-Carrageenan as a new smart macroaffinity ligand for the purification of pullulanase.

kappa-Carrageenan is a polysaccharide from red seaweed which gets precipitated by K+ ions and dissolves again in water. This smart, K(+)-responsive polymer was found to selectively bind pullulanase activity from Bacillus acidopullulyticus. Gel filtration on Sephadex G-200 showed the formation of the polymer-pullulanase complex at the pre-precipitation stage. On the other hand, phospholipase D, an enzyme which did not co-precipitate with kappa-carrageenan, did not form any complex with the polymer. Thus, K+ ions could be used to selectively precipitate the pullulanase activity. Then, 92% enzyme activity could be eluted with 1 M maltose solution. The single step protocol resulted in 50-fold purification, with a single band on sodium dodecylsulfate-polyacrylamide gel electrophoresis.

Affinity Labels↗
PubMed2003

5-Aminolevulinic acid synthase: mechanism, mutations and medicine.

5-Aminolevulinic acid synthase (ALAS), the first enzyme of the heme biosynthesis pathway, catalyses the pyridoxal 5'-phosphate-dependent condensation between glycine and succinyl-CoA to yield 5-aminolevulinic acid (5-amino-4-oxopentanoate). A three-dimensional structural model of Rhodobacter spheroides ALAS has been constructed and used to identify amino acid residues at the active site that are likely to be important for the recognition of glycine, the only amino acid substrate. Several residues have been investigated by site-directed mutagenesis and enzyme variants have been generated that are able to use alanine, serine or threonine. A three-dimensional structure model of 5-aminolevulinic acid synthase from human erythrocytes (ALAS 2) has also been constructed and used to map a range of naturally occurring human mutants that give rise to X-linked sideroblastic anemia. A number of these anemias respond favourably to vitamin B(6) (pyridoxine) therapy, whereas others are either partially responsive or completely refractory. Detailed investigations with selected human mutants have highlighted the importance of arginine-517 that is implicated in glycine carboxyl group binding.

5-Aminolevulinate Synthetase↗