Biomedical subjects
Publications and source records attributed to J A Doudna.
Structures of the ribosome and its two subunits have been determined by X-ray crystallography at resolutions sufficient to reveal interactions between RNA and protein in the subunits and orientations of substrates at the subunit interface in the intact ribosome.
Hepatitis C virus (HCV) contains an internal ribosome entry site (IRES) located in the 5' untranslated region of the genomic RNA that drives cap-independent initiation of translation of the viral message. The approximate secondary structure and minimum functional length of the HCV IRES are known, and extensive mutagenesis has established that nearly all secondary structural domains are critical for activity. However, the presence of an IRES RNA tertiary fold and its functional relevance have not been established. Using chemical and enzymatic probes of the HCV IRES RNA in solution, we show that the IRES adopts a unique three-dimensional structure at physiological salt concentrations in the absence of additional cofactors or the translation apparatus. Folding of the IRES involves cooperative uptake of magnesium and is driven primarily by charge neutralization. This tertiary structure contains at least two independently folded regions which closely correspond to putative binding sites for the 40 S ribosomal subunit and initiation factor 3 (eIF3). Point mutations that inhibit IRES folding also inhibit its function, suggesting that the IRES tertiary structure is essential for translation initiation activity. Chemical and enzymatic probing data and small-angle X-ray scattering (SAXS) experiments in solution show that upon folding, the IRES forms an extended structure in which functionally important loops are exposed. These results suggest that the 40 S ribosomal subunit and eIF3 bind an HCV IRES that is prefolded to spatially organize recognition domains.
Group I intron RNAs contain a core of highly conserved helices flanked by peripheral domains that stabilize the core structure. In the Tetrahymena group I ribozyme, the P4, P5, and P6 helices of the core pack tightly against a three-helix subdomain called P5abc. Chemical footprinting and the crystal structure of the Tetrahymena intron P4-P6 domain revealed that tertiary interactions between these two parts of the domain create an extensive solvent-inaccessible interface. We have examined the formation and stability of this tertiary interface by providing the P5abc segment in trans to a Tetrahymena ribozyme construct that lacks P5abc (EDeltaP5abc). Equilibrium gel shift experiments show that the affinity of the P5abc and EDeltaP5abc RNAs is exceptionally strong, with a Kd of approximately 100 pM at 10 mM MgCl2 (at 37 degrees C). Chemical and enzymatic footprinting shows that the RNAs are substantially folded prior to assembly of the complex. Solvent accessibility mapping reveals that, in the absence of P5abc, the intron RNA maintains a nativelike fold but its active-site helices are not tightly packed. Upon binding of P5abc, the catalytic core becomes more tightly packed through indirect effects of the tertiary interface formation. This two-component system facilitates quantitative examination of individual tertiary contacts that stabilize the folded intron.
The crystal structure of a genomic hepatitis delta virus (HDV) ribozyme 3' cleavage product predicts the existence of a 2 bp duplex, P1.1, that had not been previously identified in the HDV ribozymes. P1.1 consists of two canonical C-G base pairs stacked beneath the G.U wobble pair at the cleavage site and would appear to pull together critical structural elements of the ribozyme. P1.1 is the second stem of a second pseudoknot in the ribozyme, making the overall fold of the ribozyme a nested double pseudoknot. Sequence comparison suggests the potential for P1.1 and a similar fold in the antigenomic ribozyme. In this study, the base pairing requirements of P1.1 for cleavage activity were tested in both the genomic and antigenomic HDV ribozymes by mutagenesis. In both sequences, cleavage activity was severely reduced when mismatches were introduced into P1.1, but restored when alternative base pairing combinations were incorporated. Thus, P1.1 is an essential structural element required for cleavage of both the genomic and antigenomic HDV ribozymes and the model for the antigenomic ribozyme secondary structure should also be modified to include P1.1.
An RNA fold is the result of packing together two or more coaxial helical stacks. To date, four RNA folds have been determined at near-atomic resolution by X-ray crystallography: transfer RNA, the hammerhead ribozyme, the P4-P6 domain of the Tetrahymena group I intron, and the hepatitis delta virus ribozyme. All four folds result in RNAs that are considerably more compact than isolated A-form duplexes. These structures illustrate, to varying degrees, three modes of fold stabilization: association of complementary molecular surfaces, stabilization of close RNA packing by binding of cations, and stabilization through pseudoknotting.
The self-cleaving ribozyme of the hepatitis delta virus (HDV) is the only catalytic RNA known to be required for the viability of a human pathogen. We obtained crystals of a 72-nucleotide, self-cleaved form of the genomic HDV ribozyme that diffract X-rays to 2.3 A resolution by engineering the RNA to bind a small, basic protein without affecting ribozyme activity. The co-crystal structure shows that the compact catalytic core comprises five helical segments connected as an intricate nested double pseudoknot. The 5'-hydroxyl leaving group resulting from the self-scission reaction is buried deep within an active-site cleft produced by juxtaposition of the helices and five strand-crossovers, and is surrounded by biochemically important backbone and base functional groups in a manner reminiscent of protein enzymes.
A new crystal structure of a modified hammerhead ribozyme reveals an intermediate conformation that may explain discrepancies between previous structures and the required orientation of the labile bond in the ribozyme's active site.
Crystallization of RNA molecules other than simple oligonucleotide duplexes remains a challenging step in structure determination by X-ray crystallography. Subjecting biochemically, covalently and conformationally homogeneous target molecules to an exhaustive array of crystallization conditions is often insufficient to yield crystals large enough for X-ray data collection. Even when large RNA crystals are obtained, they often do not diffract X-rays to resolutions that would lead to biochemically informative structures. We reasoned that a well-folded RNA molecule would typically present a largely undifferentiated molecular surface dominated by the phosphate backbone. During crystal nucleation and growth, this might result in neighboring molecules packing subtly out of register, leading to premature crystal growth cessation and disorder. To overcome this problem, we have developed a crystallization module consisting of a normally intramolecular RNA-RNA interaction that is recruited to make an intermolecular crystal contact. The target RNA molecule is engineered to contain this module at sites that do not affect biochemical activity. The presence of the crystallization module appears to drive crystal growth, in the course of which other, non-designed contacts are made. We have employed the GAAA tetraloop/tetraloop receptor interaction successfully to crystallize numerous group II intron domain 5-domain 6, and hepatitis delta virus (HDV) ribozyme RNA constructs. The use of the module allows facile growth of large crystals, making it practical to screen a large number of crystal forms for favorable diffraction properties. The method has led to group II intron domain crystals that diffract X-radiation to 3.5 A resolution.
Metal ions are essential for the folding and activity of large catalytic RNAs. While divalent metal ions have been directly implicated in RNA tertiary structure formation, the role of monovalent ions has been largely unexplored. Here we report the first specific monovalent metal ion binding site within a catalytic RNA. As seen crystallographically, a potassium ion is coordinated immediately below AA platforms of the Tetrahymena ribozyme P4-P6 domain, including that within the tetraloop receptor. Interference and kinetic experiments demonstrate that potassium ion binding within the tetraloop receptor stabilizes the folding of the P4-P6 domain and enhances the activity of the Azoarcus group I intron. Since a monovalent ion binding site is integral to the tetraloop receptor, a tertiary structural motif that occurs frequently in RNA, monovalent metal ions are likely to participate in the folding and activity of a wide diversity of RNAs.
How do large RNA molecules find their active conformations among a universe of possible structures? Two recent studies reveal that RNA folding is a rapid and ordered process, with surprising similarities to protein folding mechanisms.
Explore the source record for details and available documents.
The active site of group I self-splicing introns occurs at the interface of two proposed structural domains. In the Tetrahymena intron, half of the catalytic core resides within the independently-folding P4-P6 domain while the other half belongs to a putative domain that includes helices P3, P7, P8, and P9 (P3-P9). To determine whether the P3-P9 region of the intron can also fold independently, we used Fe(II)-EDTA and dimethyl sulfate to probe the solvent accessibility of separate fragments of the Tetrahymena intron. These RNAs self-assemble into an active complex in trans, enabling analysis of their structural features both alone and within the complex. Our results show that while the P3-P9 region of the intron retains its secondary structure, most of the tertiary interactions within this region do not form stably in the absence of the P4-P6 domain. This indicates that the P4-P6 domain induces folding in the P3-P9 region, organizing the catalytic cleft between them. Thus the P4-P6 domain provides a scaffold for the folding of the Tetrahymena intron core.
Structured RNAs play an essential role in chromosome maintenance, RNA processing, protein biosynthesis, and protein transport. To understand RNA function in these diverse biological systems, the rules for RNA folding and recognition must be learned. Recent crystal structures of hammerhead ribozymes, a group I intron domain, and RNA duplexes provide new insights into the principles of RNA folding and function.
Structured RNA molecules play essential roles in RNA processing, chromosome maintenance and protein biosynthesis. RNA necessarily uses different strategies than proteins for folding and assembly of complex architectures. The RNA-folding problem is largely an issue of helical packing: how does RNA organize and pack short, double-helical segments to produce active sites and recognition motifs for proteins? Noncanonical base pairs, metal ions and 2'-hydroxyl groups are key elements in RNA higher-order structure formation.
RNAs, like proteins, readily form specific structures adapted for ligand binding and catalysis. Since they are composed of completely different chemical building blocks, however, RNAs and proteins necessarily use distinct strategies to assemble complex architectures. While burial of hydrophobic residues drives protein folding, the hydrophobic effect in RNA contributes primarily to the formation of secondary structure. To form tertiary structure, RNA must overcome electrostatic repulsions from the phosphate backbone. How do negatively charged double helices pack together to produce catalytic centers and ligand binding surfaces? Here, we review our understanding of the principles that underlie RNA folding based on the structural information currently available.
Large ribozymes require divalent metal ions to fold. We show here that the tertiary structure of the Tetrahymena group I intron P4-P6 domain nucleates around a magnesium ion core. In the domain crystal structure, five magnesium ions bind in a three-helix junction at the centre of the molecule. Single atom changes in any one of four magnesium sites in this three-helix junction destroy folding of the entire 160-nucleotide P4-P6 domain. The magnesium ion core may be the RNA counterpart to the protein hydrophobic core, burying parts of the RNA molecule in the native structure.
Explore the source record for details and available documents.
Explore the source record for details and available documents.