PubMed Health⌕ Search

Biomedical subjects

J B Dressman

Publications and source records attributed to J B Dressman.

At least 19 recordsLinked to original sources
PubMed2007

Biowaiver monographs for immediate release solid oral dosage forms: isoniazid.

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing isoniazid as the only active pharmaceutical ingredient (API) are reviewed. Isoniazid's solubility and permeability characteristics according to the Biopharmaceutics Classification System (BCS), as well as its therapeutic use and therapeutic index, its pharmacokinetic properties, data related to the possibility of excipient interactions and reported BE/bioavailability (BA) problems were taken into consideration. Isoniazid is "highly soluble" but data on its oral absorption and permeability are inconclusive, suggesting this API to be on the borderline of BCS Class I and III. For a number of excipients, an interaction with the permeability is extreme unlikely, but lactose and other deoxidizing saccharides can form condensation products with isoniazid, which may be less permeable than the free API. A biowaiver is recommended for IR solid oral drug products containing isoniazid as the sole API, provided that the test product meets the WHO requirements for "very rapidly dissolving" and contains only the excipients commonly used in isoniazid products, as listed in this article. Lactose and/or other deoxidizing saccharides containing formulations should be subjected to an in vivo BE study.

Biological Availability↗
PubMed2007

Biowaiver monographs for immediate release solid oral dosage forms: prednisolone.

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing prednisolone are reviewed. Data on its solubility, oral absorption, and permeability are not totally conclusive, but strongly suggest a BCS Class 1 classification. Prednisolone's therapeutic indications and therapeutic index, pharmacokinetics, and the possibility of excipient interactions were also taken into consideration. Available evidence indicates that a biowaiver for IR solid oral dosage forms formulated with the excipients tabulated in this article would be unlikely to expose patients to undue risks.

Administration, Oral↗
PubMed2006

Review of global regulations concerning biowaivers for immediate release solid oral dosage forms.

The regulations with respect to biowaivers for immediate release (IR) solid oral dosage forms in the USA, the EU, Japan and from the World Health Organization (WHO) are summarized and compared. Two case studies are presented, one from our own files and one from the open literature, showing the similarities and the differences among the qualification requirements of the four systems. The regulatory experience gained up to now is reviewed and expected future trends are discussed.

Administration, Oral↗
PubMed2006

Biowaiver monographs for immediate release solid oral dosage forms: acetaminophen (paracetamol).

Literature data are reviewed on the properties of acetaminophen (paracetamol) related to the biopharmaceutics classification system (BCS). According to the current BCS criteria, acetaminophen is BCS Class III compound. Differences in composition seldom, if ever, have an effect on the extent of absorption. However, some studies show differences in rate of absorption between brands and formulations. In particular, sodium bicarbonate, present in some drug products, was reported to give an increase in the rate of absorption, probably caused by an effect on gastric emptying. In view of Marketing Authorizations (MAs) given in a number of countries to acetaminophen drug products with rapid onset of action, it is concluded that differences in rate of absorption were considered therapeutically not relevant by the Health Authorities. Moreover, in view of its therapeutic use, its wide therapeutic index and its uncomplicated pharmacokinetic properties, in vitro dissolution data collected according to the relevant Guidances can be safely used for declaring bioequivalence (BE) of two acetaminophen formulations. Therefore, accepting a biowaiver for immediate release (IR) acetaminophen solid oral drug products is considered scientifically justified, if the test product contains only those excipients reported in this paper in their usual amounts and the test product is rapidly dissolving, as well as the test product fulfils the criterion of similarity of dissolution profiles to the reference product.

Acetaminophen↗
PubMed2006

Biowaiver monographs for immediate release solid oral dosage forms: cimetidine.

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing cimetidine are reviewed. According to the current Biopharmaceutics Classification System (BCS), cimetidine would be assigned to Class III. Cimetidine's therapeutic use and therapeutic index, its pharmacokinetic properties, data related to the possibility of excipient interactions, and reported BE/bioavailability (BA) problems were also taken into consideration. On the basis of the overall evidence, a biowaiver can be recommended for cimetidine IR products, provided that the test product contains only those excipients reported in this paper in their usual amounts, and that the test and the comparator drug products both are "rapidly dissolving" as per BCS.

Administration, Oral↗
PubMed2006

Biowaiver monographs for immediate release solid oral dosage forms: amitriptyline hydrochloride.

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing amitriptyline hydrochloride are reviewed. Its therapeutic uses, its pharmacokinetic properties, the possibility of excipient interactions and reported BE/bioavailability (BA) problems are also taken into consideration. Literature data indicates that amitriptyline hydrochloride is a highly permeable active pharmaceutical ingredient (API). Data on the solubility according to the current Biopharmaceutics Classification System (BCS) were not fully available and consequently amitriptyline hydrochloride could not be definitively assigned to either BCS Class I or BCS Class II. But all evidence taken together, a biowaiver can currently be recommended provided that IR tablets are formulated with excipients used in existing approved products and that the dissolution meets the criteria defined in the Guidances.

Administration, Oral↗
PubMed2005

Comparison of a miniaturized shake-flask solubility method with automated potentiometric acid/base titrations and calculated solubilities.

Solubility is one of the most important parameters for lead selection and optimization during drug discovery. Its determination should therefore take place as early as possible in the process. Because of the large numbers of compounds involved and the very low amounts of each compound available in the early development stage, it is highly desirable to measure the solubility with as little compound as possible and to be able to improve the throughput of the methods used. In this work, a miniaturized shake-flask method was developed and the solubility results were compared with those measured by semiautomated potentiometric acid/base titrations and computational methods for 21 poorly soluble compounds with solubilities mostly in the range 0.03-30 microg/mL. The potentiometric method is very economical (approximately 100 microg of a poorly soluble compound is needed) and is able to create a pH/solubility profile with one single determination, but is limited to ionizable compounds. The miniaturized shake-flask method can be used for all compounds and a wide variety of media. Its precision and throughput proved superior to the potentiometric method for very poorly soluble compounds. Up to 20 compounds a week can be studied with one set-up. Calculated solubility data seem to be sufficient for a first estimate of the solubility, but they cannot currently be used as a substitute for experimental measurements at key decision points in the development process.

Algorithms↗
PubMed2005

Biowaiver monographs for immediate release solid oral dosage forms: ranitidine hydrochloride.

Literature and experimental data relevant to the decision to allow a waiver of in vivo bioequivalence testing for the approval of immediate release (IR) solid oral dosage forms containing ranitidine hydrochloride are reviewed. According to the current Biopharmaceutics Classification System (BCS), ranitidine hydrochloride should be assigned to Class III. However, based on its therapeutic and therapeutic index, pharmacokinetic properties and data related to the possibility of excipient interactions, a biowaiver can be recommended for IR solid oral dosage forms that are rapidly dissolving and contain only those excipients as reported in this study.

Administration, Oral↗
PubMed2005

Biowaiver monographs for immediate release solid oral dosage forms: ibuprofen.

Literature data are reviewed on the properties of ibuprofen related to the biopharmaceutics classification system (BCS). Ibuprofen was assessed to be a BCS class II drug. Differences in composition and/or manufacturing procedures were reported to have an effect on the rate, but not the extent of absorption; such differences are likely to be detectable by comparative in vitro dissolution tests. Also in view of its therapeutic use, its wide therapeutic index and uncomplicated pharmacokinetic properties, a biowaiver for immediate release (IR) ibuprofen solid oral drug products is scientifically justified, provided that the test product contains only those excipients reported in this paper in their usual amounts, the dosage form is rapidly dissolving (85% in 30 min or less) in buffer pH 6.8 and the test product also exhibits similar dissolution profiles to the reference product in buffer pH 1.2, 4.5, and 6.8.

Administration, Oral↗
PubMed2005

Enteric-coated cholylsarcosine microgranules for the treatment of short bowel syndrome.

Cholylsarcosine (CS) is a semisynthetic bile salt that may be useful in bile salt replacement therapy of short bowel syndrome (SBS). In SBS the bile salt pool becomes depleted, disturbing the uptake of dietary lipids and resulting in weight loss. Previous studies showed that CS in a simple capsule formulation of 1.5-12 g day(-1) can increase the uptake of lipids but often results in gastric irritation. In this work a microgranule dosage form was developed to protect the gastric mucosa while facilitating rapid generation of CS levels in the duodenum. CS microgranules were produced by wet granulation and coated with Eudragit L30D-55 in a fluidized-bed coater. The in-vitro dissolution rate of CS from the microgranules was investigated with USP apparatus under fasted- and fed-state conditions. CS release was delayed under simulated gastric conditions (pH 1.2 and 4.5) but was very fast at higher pH values (5.5, 5.8 and 6.5) more typical of the duodenum. In a pilot clinical trial, four patients received 4 g CS with meals (1.5 g with lunch, 2.5 g with dinner) for 1 week. The parameters investigated were fat absorption coefficient (FAC%), serum beta-carotene level and faecal weight. Although study numbers were too small to achieve statistical significance, the serum beta-carotene level and FAC% increased in the three patients who completed the trial. As expected, the fecal weight did not change. The results indicate that the CS microgranules are promising for the treatment of the intraluminal bile salt deficiency in patients with SBS.

Adult↗
PubMed2004

In vivo evaluation of a novel pH- and time-based multiunit colonic drug delivery system.

BACKGROUND: Targeted drug delivery to the colon is important for topical treatment of inflammatory bowel diseases. Established targeting systems predominantly focus on either pH- or time-dependent release, or bacterial degradation. AIM: To perform a three-phase, crossover design trial evaluating a novel combined pH- and time-based multiunit delivery system. METHODS: Twelve healthy male volunteers each received 200 mg of caffeine as either uncoated immediate release tablets, coated pellets with pH-dependent rapid release (EUDRAGIT FS 30D), and pellets with pH- and time-based release (inner layer EUDRAGIT RL/RS 30D; outer layer EUDRAGIT FS 30D). Orocecal transit time was measured using lactose-[13C]ureide. Serum concentrations of caffeine were measured by high-performance liquid chromatography. RESULTS: In contrast to the uncoated tablet, both coated systems reached the ileocecal region almost at the same time (3.19 +/- 0.71 and 3.33 +/- 0.81 h). Serum caffeine profiles were significantly prolonged for the pH and time delivery system compared with the pH-only based system (median tmax 12.0 vs. 5.5 h; P < 0.001). This was further reflected by a lower Cmax value and a lower area under the curve within 24 h after application. CONCLUSION: Compared with the conventional delivery systems, drug release from the new dosage form may offer a new dimension for the oral treatment of mid to distal ulcerative colitis.

Administration, Oral↗
PubMed2001

Influence of physicochemical properties on dissolution of drugs in the gastrointestinal tract.

The rate-limiting step to absorption of drugs from the gastrointestinal (GI) tract is often dissolution from the dosage form. Consideration of the Noyes-Whitney dissolution model shows that drug diffusivity, solubility in the gastrointestinal contents, the surface area of the solid wetted by the lumenal fluids and the GI hydrodynamics all play a role in determining the in vivo dissolution rate. Solubility in the GI contents is determined by aqueous solubility, crystalline form, drug lipophilicity, solubilization by native surfactants and co-ingested foodstuffs, and pK(a) in relation to the GI pH profile. Compounds with aqueous solubilities lower than 100 microg/ml often present dissolution limitations to absorption. The dose:solubility ratio of the drug provides an estimate of the volume of fluids required to dissolve an individual dose, and when this volume exceeds 1 l, dissolution is often problematic. The surface area of a drug available for dissolution depends on the particle size of the solid and its ability to be wetted by lumenal fluids. Other physiological factors that can play a role in dissolution include the viscosity of the lumenal contents, through its effect on the diffusivity, and mixing and flow patterns within the gut. In order to better predict in vivo dissolution of drugs, dissolution tests which more adequately simulate the physiological conditions are needed.

Animals↗
PubMed2001

A new 5-aminosalicylic acid multi-unit dosage form for the therapy of ulcerative colitis.

The aim of the present study was to develop a multi-unit dosage form containing 5-aminosalicylic acid (5-ASA) for the treatment of ulcerative colitis (UC), optimised on the basis of recent studies indicating that UC patients have higher intestinal pH than was previously thought to be the case. Pellets with a drug content of 77.4% were prepared by a granulation and spheronization process and then coated with a new pH sensitive poly(meth)acrylate copolymer (Eudragit((R)) FS 30D) to achieve site specific drug release close to the ileocecal valve. Dissolution tests were carried out in a paddle dissolution apparatus in media simulating pH conditions at various locations in the gastrointestinal tract. The pellets released rapidly at pH values above 7.5. Between 6.8 and 7.2 drug release was found to be zero order, while at pH 6.5 and below no release occurred. In a biorelevant medium which simulates the fasting proximal small intestine fluid it was shown that neither surfactants (sodium taurocholate and lecithin) nor changes in ionic strength trigger drug release. Compared to 5-ASA pellets coated with the well established Eudragit((R)) S, and to currently marketed products licensed for the treatment of UC, the multi-unit dosage form coated with the new polymer exhibited an in vitro dissolution profile more appropriate to the pH profile of the ileum and the colon observed in UC patients.

Acrylates↗
PubMed2001

Biorelevant dissolution testing to predict the plasma profile of lipophilic drugs after oral administration.

PURPOSE: To quantitatively compare in vitro dissolution data in biorelevant and compendial media, to investigate whether in vitro differences are reflected in the simulated plasma profile and to specify under which circumstances prediction of the plasma profile of orally administered lipophilic drugs can be achieved. METHODS: Previously published dissolution data from seven products of four lipophilic drugs were compared using the first order model, the RRSBW distribution, and a model based on the Noyes-Whitney theory. Simulated plasma profiles were then obtained using a model-dependent approach. Simulated and observed plasma profiles were compared with the difference factor, f1. RESULTS: No model consistently provided the best fit to the in vitro data, which varied significantly with medium composition. Prediction of the plasma profile was possible (9.6 < or = f1 < or = 34.2) in seven out of eleven cases. CONCLUSIONS: Although prediction of the plasma profile of lipophilic drugs solely on the basis of in vitro data remains an ambitious target, this study shows that the plasma profile of a lipophilic drug can be predicted with appropriate in vitro dissolution data, provided that the absolute bioavailability of the drug is known and the drug has dissolution limited absorption.

Adamantane↗
PubMed2000

In vitro-in vivo correlations for lipophilic, poorly water-soluble drugs.

Although several routes of administration can be considered for new drug entities, the most popular remains the oral route. To predict the in vivo performance of a drug after oral administration from in vivo data, it is essential that the limiting factor to absorption can be modelled in vitro. In the case of BCS class II drugs dissolution is rate-limiting to absorption, so the use of biorelevant dissolution tests can be used to predict differences in bioavailability among different formulations and dosing conditions. To achieve an a priori correlation, the composition, volume and hydrodynamics of the contents in the gastrointestinal lumen following administration of the dosage form must be accurately simulated. Four media have been chosen/developed to model composition of the gastric and intestinal contents before and after meal intake. These are SGF, milk, FASSIF and FeSSIF, which model fasted and fed state conditions in the stomach and small intestine respectively. Using these media, excellent correlations have been obtained with the following poorly soluble drugs: danazol, ketoconazole, atovaquone and troglitazone. In all cases, fed vs. fasted state effects can be predicted from dissolution data and, where several formulations were available for testing, dissolution tests could also be used to determine which would have the best in vivo performance.

Administration, Oral↗
PubMed2000

Dissolution testing as a prognostic tool for oral drug absorption: dissolution behavior of glibenclamide.

PURPOSE: The dissolution behavior of two commercially available glibenclamide formulations was tested in various media. The aim of the study was to investigate whether the use of biorelevant dissolution media (BDM) would be advantageous over the use of standard media for predicting the in vivo performance of the two formulations. METHODS: The dissolution tests were performed using USP 23 apparatus 2. Conventional buffers and USP media were compared with two BDM containing different amounts of lecithin and sodium taurocholate. RESULTS: The dissolution of two drug powders was highly dependent on wetting, particle size, pH, and the composition of the medium used. In addition, the dissolution behavior of the two glibenclamide formulations showed differences in all media tested. The dissolution results of the two formulations were compared with those from an in vivo bioequivalence study undertaken by the central quality control laboratory of the German pharmacists (ZL). The bioequivalence criterion set by the ZL requires more than 80% drug release within 10 minutes. Results in FaSSIF, one of the BDMs, met the ZL criterion and this medium was also able to discriminate between the two formulations. This was not the case for the other media tested. CONCLUSIONS: The study indicates that BDM are better able to discriminate between glibenclamide formulations than standard dissolution media.

Administration, Oral↗
PubMed1999

Longitudinal versus radial effects of hydroxypropylmethylcellulose on gastrointestinal glucose absorption in dogs.

Many water soluble fibers have been shown to favorably affect the postprandial glucose profile in humans. Hydroxypropylmethylcellulose (HPMC), a fiber which has been shown to increase glucose tolerance in dogs and noninsulin dependent diabetics, was chosen to study the luminal interactions which mediate this effect. The ability of HPMC to influence upper gastrointestinal (GI) viscosity, transit, and water flux of 5% and 20% glucose solutions was studied in five female dogs fistulated at the proximal duodenum and/or midjejunum. HPMC elevated intraluminal viscosity, with a linear relationship existing between input and luminal viscosity. The ability to modify intraluminal viscosity was greater for isoosmotic (5%) glucose solutions than for hyperosmotic (20%) glucose solutions. HPMC also modified the transit profile of isoosmotic (5%) glucose solutions at midgut by both increasing the lag times before the onset of chyme recovery from 5.5+/-3.1 min to 9-55 min (depending on the viscosity of the administered solution) and decreasing the first-order transit rate constants from 0.115+/-0.07 min-1 to 0.014-0.035 min-1. By contrast, the transit profile of hyperosmotic (20%) glucose solutions was not significantly affected. Net cumulative water flux across the gut wall was not significantly affected in either case by the presence of HPMC. These results, in combination with the amount of glucose recovered from midgut fistula, suggest that following the administration of glucose solutions, HPMC effects on blood glucose levels are mediated by mechanisms which relate to the increased intraluminal viscosity but vary according to the input glucose load. For isoosmotic glucose loads, both the decreased upper GI transit rate and hindered radial movement play a role. Although HPMC modifies glucose absorption from hyperosmotic solutions, this study shows that luminal effects occurring before midgut are modest.

Animals↗