Biomedical subjects

J B Heymann

Publications and source records attributed to J B Heymann.

At least 19 recordsLinked to original sources

PubMed2001

Capsid structure of Kaposi's sarcoma-associated herpesvirus, a gammaherpesvirus, compared to those of an alphaherpesvirus, herpes simplex virus type 1, and a betaherpesvirus, cytomegalovirus.

The capsid of Kaposi's sarcoma-associated herpesvirus (KSHV) was visualized at 24-A resolution by cryoelectron microscopy. Despite limited sequence similarity between corresponding capsid proteins, KSHV has the same T=16 triangulation number and much the same capsid architecture as herpes simplex virus (HSV) and cytomegalovirus (CMV). Its capsomers are hexamers and pentamers of the major capsid protein, forming a shell with a flat, close-packed, inner surface (the "floor") and chimney-like external protrusions. Overlying the floor at trigonal positions are (alpha beta(2)) heterotrimers called triplexes. The floor structure is well conserved over all three viruses, and the most variable capsid features reside on the outer surface, i.e., in the shapes of the protrusions and triplexes, in which KSHV resembles CMV and differs from HSV. Major capsid protein sequences from the three subfamilies have some similarity, which is closer between KSHV and CMV than between either virus and HSV. The triplex proteins are less highly conserved, but sequence analysis identifies relatively conserved tracts. In alphaherpesviruses, the alpha-subunit (VP19c in HSV) has a 100-residue N-terminal extension and an insertion near the C terminus. The small basic capsid protein sequences are highly divergent: whereas the HSV and CMV proteins bind only to hexons, difference mapping suggests that the KSHV protein, ORF65, binds around the tips of both hexons and pentons.

Amino Acid Sequence↗

PubMed2000

Structural determinants of water permeation through aquaporin-1.

Human red cell AQP1 is the first functionally defined member of the aquaporin family of membrane water channels. Here we describe an atomic model of AQP1 at 3.8A resolution from electron crystallographic data. Multiple highly conserved amino-acid residues stabilize the novel fold of AQP1. The aqueous pathway is lined with conserved hydrophobic residues that permit rapid water transport, whereas the water selectivity is due to a constriction of the pore diameter to about 3 A over a span of one residue. The atomic model provides a possible molecular explanation to a longstanding puzzle in physiology-how membranes can be freely permeable to water but impermeable to protons.

Amino Acid Sequence↗

PubMed2000

Atomic force microscopy of native purple membrane.

Atomic force microscopy (AFM) allows the observation of surface structures of purple membrane (PM) in buffer solution with subnanometer resolution. This offers the possibility to classify the major conformations of the native bacteriorhodopsin (BR) surfaces and to map the variability of individual polypeptide loops connecting transmembrane alpha-helices of BR. The position, the variability and the flexibility of these loops depend on the packing arrangement of BR molecules in the lipid bilayer with significant differences observed between the trigonal and orthorhombic crystal forms. Cleavage of the Schiff base bond leads to a disassembly of the trigonal PM crystal, which is restored by regenerating the bleached PM. The combination of single molecule AFM imaging and single molecule force-spectroscopy provides an unique insight into the interactions between individual BR molecules and the PM, and between secondary structure elements within BR.

Bacteriorhodopsins↗

PubMed2000

The fold of human aquaporin 1.

The fold of human aquaporin 1 is determined from cryo-electron microscopic data at 4.5 A resolution. The monomeric structure consists of two transmembrane triple helices arranged around a pseudo-2-fold axis connected by a long flexible extracellular loop. Each triplet contains between its second and third helix a functional loop containing the highly conserved fingerprint NPA motif. These functional loops are assumed to fold inwards between the two triplets, thereby forming the heart of the water channel. The helix topology was determined from the directionality pattern of each of the six transmembrane helices with respect to the membrane, together with constraints defined by the sequence and atomic force microscopy data. The directionality of the helices was determined by collecting the best-fitting orientations resulting from a search through the three-dimensional experimental map for a large number of alpha-helical fragments. Tests on cryo-electron crystallographic bacteriorhodopsin data suggest that our method is generally applicable to determine the topology of helical proteins for which only medium-resolution electron microscopy data are available.

Aquaporin 1↗

PubMed2000

Conformations of the rhodopsin third cytoplasmic loop grafted onto bacteriorhodopsin.

BACKGROUND: The third cytoplasmic loop of rhodopsin (Rho EF) is important in signal transduction from the retinal in rhodopsin to its G protein, transducin. This loop also interacts with rhodopsin kinase, which phosphorylates light-activated rhodopsin, and arrestin, which displaces transducin from light-activated phosphorylated rhodopsin. RESULTS: We replaced eight residues of the EF loop of bacteriorhodopsin (BR) with 24 residues from the third cytoplasmic loop of bovine Rho EF. The surfaces of purple membrane containing the mutant BR (called IIIN) were imaged by atomic force microscopy (AFM) under physiological conditions to a resolution of 0.5-0.7 nm. The crystallinity and extracellular surface of IIIN were not perturbed, and the cytoplasmic surface of IIIN increased in height compared with BR, consistent with the larger loop. Ten residues of Rho EF were excised by V8 protease, revealing helices E and F in the AFM topographs. Rho EF was modeled onto the BR structure, and the envelope derived from the AFM data of IIIN was used to select probable models. CONCLUSIONS: A likely conformation of Rho EF involves some extension of helices E and F, with the tip of the loop lying over helix C and projecting towards the C terminus. This is consistent with mutagenesis data showing the TTQ transducin-binding motif close to loop CD, and cysteine cross-linking data indicating the C-terminal part of Rho EF to be close to the CD loop.

Amino Acid Sequence↗

PubMed2000

Structural clues in the sequences of the aquaporins.

The large number of sequences available for the aquaporin family represents a valuable source of information to incorporate into three-dimensional structure determination. Phylogenetic analysis was used to define type sequences to avoid extreme over-representation of some subfamilies, and as a measure of the quality of multiple sequence alignment. Inspection of the sequence alignment suggested eight conserved segments that define the core architecture of six transmembrane helices and two functional loops, B and E, projecting into the plane of the membrane. The sum of the core segments and the minimum lengths of the interlinking loops constitute the 208 residues necessary to satisfy the aquaporin architecture. Analysis of hydrophobic and conservation periodicity and of correlated mutations across the alignment indicated the likely assignment and orientation of the helices in the bilayer. This assignment is examined with respect to the structure of the erythrocyte aquaporin 1 determined by electron crystallography. The aquaporin 1 tetramer is described as three rings of helices, each ring with a different exposure to the lipid environment. The sequence analysis clearly suggests that two helices are exposed along their whole lengths, two helices are exposed only at their N termini, and two helices are not exposed to lipid. It is further proposed that, besides loops B and E, the highly conserved motifs on helices 1 and 4, ExxxTxxF/L, could line the water channel.

Amino Acid Sequence↗

PubMed1999

Charting the surfaces of the purple membrane.

The preponderance of structural data of the purple membrane from X-ray diffraction (XRD), electron crystallography (EC), and atomic force microscopy (AFM) allows us to ask questions about the structure of bacteriorhodopsin itself, as well as about the information derived from the different techniques. The transmembrane helices of bacteriorhodopsin are quite similar in both EC and XRD models. In contrast, the loops at the surfaces of the purple membrane show the highest variability between the atomic models, comparable to the height variance measured by AFM. The excellent agreement of the AFM topographs with the atomic models from XRD builds confidence in the results. Small technical difficulties in EC lead to poorer resolution of the loop structures, although the combination of atomic models with AFM surfaces allows clear interpretation of the extent and flexibility of the loop structures. While XRD remains the premier technique to determine very-high-resolution structures, EC offers a method to determine loop structures unhindered by three-dimensional crystal contacts, and AFM provides information about surface structures and their flexibility under physiological conditions.

Amino Acid Motifs↗

PubMed1999

The structure of aquaporin-1 at 4.5-A resolution reveals short alpha-helices in the center of the monomer.

Aquaporin-1 is a water channel found in mammalian red blood cells that is responsible for high water permeability of its membrane. Our electron crystallographic analysis of the three-dimensional structure of aquaporin-1 at 4.5-A resolution confirms the previous finding that each subunit consists of a right-handed bundle of six highly tilted transmembrane helices that surround a central X-shaped structure. In our new potential map, the rod-like densities for the transmembrane helices show helically arranged protrusions, indicating the positions of side chains. Thus, in addition to the six transmembrane helices, observation of helically arranged side-chain densities allowed the identification of two short alpha-helices representing the two branches of the central X-shaped structure that extend to the extracellular and cytoplasmic membrane surfaces. The other two branches are believed to be loops connecting the short alpha-helix to a neighboring transmembrane helix. A pore found close to the center of the aquaporin-1 monomer is suggested to be the course of water flow with implications for the water selectivity.

Aquaporin 1↗

PubMed1999

Organising multi-dimensional biological image information: the BioImage Database.

Nowadays it is possible to unravel complex information at all levels of cellular organization by obtaining multi-dimensional image information. At the macromolecular level, three-dimensional (3D) electron microscopy, together with other techniques, is able to reach resolutions at the nanometer or subnanometer level. The information is delivered in the form of 3D volumes containing samples of a given function, for example, the electron density distribution within a given macromolecule. The same situation happens at the cellular level with the new forms of light microscopy, particularly confocal microscopy, all of which produce biological 3D volume information. Furthermore, it is possible to record sequences of images over time (videos), as well as sequences of volumes, bringing key information on the dynamics of living biological systems. It is in this context that work on BioImage started two years ago, and that its first version is now presented here. In essence, BioImage is a database specifically designed to contain multi-dimensional images, perform queries and interactively work with the resulting multi-dimensional information on the World Wide Web, as well as accomplish the required cross-database links. Two sister home pages of BioImage can be accessed at http://www. bioimage.org and http://www-embl.bioimage.org

Bacterial Proteins↗

PubMed1998

Progress on the structure and function of aquaporin 1.

Life exists in water as universal solvent, and cells need to deal with its influx and efflux. Nature has accomplished the almost impossible, creating membrane channels with both a high flux and a high specificity for water. The first water channel was discovered in red blood cell membranes. Today known as aquaporin-1, this channel was found to be closely related to the major integral protein (MIP)1 of the eye lens. Cloning and sequencing of numerous related proteins of the MIP family revealed the widespread occurrence of such channels, suggesting an essential physiological function. Their structures hold the clues to the remarkable water channel activity, as well as to the arrangement of transmembrane segments in general. Recent medium-resolution three-dimensional electron microscopic studies determined a tetrameric complex with six tilted transmembrane helices per monomer. The helices within each monomer surround a central density formed by two interhelical loops implicated by mutagenesis in the water channel function. A combination of sequence analysis and assignment of the observed densities to predicted helices provides a basis for speculation on the nature of the water course through the protein. In particular, four highly conserved polar residues, E142-N192-N76-E17, are proposed to form a chain of key groups involved in the pathway of water flow through the channel.

Animals↗

PubMed1998

2D crystallization of membrane proteins: rationales and examples.

The difficulty in crystallizing channel proteins in three dimensions limits the use of X-ray crystallography in solving their structures. In contrast, the amphiphilic character of integral membrane proteins promotes their integration into artificial lipid bilayers. Protein-protein interactions may lead to ordering of the proteins within the lipid bilayer into two-dimensional crystals that are amenable to structural studies by electron crystallography and atomic force microscopy. While reconstitution of membrane proteins with lipids is readily achieved, the mechanisms for crystal formation during or after reconstitution are not well understood. The nature of the detergent and lipid as well as pH and counter-ions is known to influence the crystal type and quality. Protein-protein interactions may also promote crystal stacking and aggregation of the sheet-like crystals, posing problems in data collection. Although highly promising, the number of well-studied examples is still too small to draw conclusions that would be applicable to any membrane protein of interest. Here we discuss parameters influencing the outcome of two-dimensional crystallization trials using prominent examples of channel protein crystals and highlight areas where further improvements to crystallization protocols can be made.

Bacterial Proteins↗

PubMed1997

The three-dimensional structure of aquaporin-1.

The entry and exit of water from cells is a fundamental process of life. Recognition of the high water permeability of red blood cells led to the proposal that specialized water pores exist in the plasma membrane. Expression in Xenopus oocytes and functional studies of an erythrocyte integral membrane protein of relative molecular mass 28,000, identified it as the mercury-sensitive water channel, aquaporin-1 (AQP1). Many related proteins, all belonging to the major intrinsic protein (MIP) family, are found throughout nature. AQP1 is a homotetramer containing four independent aqueous channels. When reconstituted into lipid bilayers, the protein forms two-dimensional lattices with a unit cell containing two tetramers in opposite orientation. Here we present the three-dimensional structure of AQP1 determined at 6A resolution by cryo-electron microscopy. Each AQP1 monomer has six tilted, bilayer-spanning alpha-helices which form a right-handed bundle surrounding a central density. These results, together with functional studies, provide a model that identifies the aqueous pore in the AQP1 molecule and indicates the organization of the tetrameric complex in the membrane.

Animals↗

PubMed1997

Electron and atomic force microscopy of membrane proteins.

Electron crystallography is becoming a powerful tool for the resolution of membrane protein structures. The past year has seen the production of a bacteriorhodopsin model at 3.5 A and the structure of aquaporin 1 approaching atomic resolution. Determination of surface topographies of 2D crystals using the atomic force microscope is similarly advancing to a level that reveals submolecular details. As the latter is operated in solution, membrane proteins can be observed at work.

Aquaporin 1↗

PubMed1996

Characterization of electrostatic and nonelectrostatic components of protein--membrane binding interactions.

A general method was developed to determine the thermodynamic parameters for the interaction of protein with membranes. Protein intrinsic tryptophan fluorescence was quenched by titration with large unilamellar vesicles containing 9,10-dibrominated distearoylphosphatidylcholine (Br4-DSPC) or a small amount of trinitrophenylphosphatidylethanolamine (TNP-PE), Binding was modeled as a bimolecular reaction of free protein with a unit of "n" lipid molecules and a dissociation constant, Kd. The contribution of residual fluorescence and light scattering could be eliminated by using the second derivative of the titration function as the basis for calculations. For the binding of C-terminal channel domain polypeptides(178-190 residues) of the colicin El ion channel, n=50-60 and Kd=2-3 nM at pH 4, ionic strength, I=0.12 M, and anionic lipid content = 40% (surface potential, psi o =-30 mV), conditions for which the protein has high activity. Values of n = 95 and 210 for the binding of a C-terminal 293-residue colicin fragment and the 522 residue intact colicin E1 molecule scale qualitatively according to the increase in molecular size. General methods are presented to distinguish the electrostatic (delta G el) and nonelectrostatic (delta G nel) components of the total delta G for binding. Using Br4DSPC as the quencher, the binding of the channel polypeptide, P178, was characterized by delta G approximately -9.8 kcal/mol, and delta G el approximately -7.0 kcal/mol, and delta G el= -2.8 kcal/mol (psi o = -30 mV). Using TNP-PE as the quencher, similar values of delta G approximately -9.3 to -9.9 kcal/mol were determined, a somewhat smaller value for delta G nel approximately -5.0 kcal/mol, and a correspondingly larger value for deltaGnel approximately -4.9 kcal/mol. The existence of a delta G nel component of this magnitude may distinguish proteins that have the potential to insert into the membrane.

Colicins↗

PubMed1996

Membrane binding of the colicin E1 channel: activity requires an electrostatic interaction of intermediate magnitude.

In vitro channel activity of the C-terminal colicin E1 channel polypeptide under conditions of variable electrostatic interaction with synthetic lipid membranes showed distinct maxima with respect to pH and membrane surface potential. The membrane binding energy was determined from fluorescence quenching of the intrinsic tryptophans of the channel polypeptide by liposomes containing N-trinitrophenyl-phosphatidylethanolamine. Maximum in vitro colicin channel activity correlated with an intermediate magnitude of the electrostatic interaction. For conditions associated with maximum activity (40% anionic lipid, I = 0.12 M, pH 4.0), the free energy of binding was delta G approximately -9 kcal/mol, with nonelectrostatic and electrostatic components, delta Gnel approximately -5 kcal/mol and delta Gel approximately -4 kcal/mol, and an effective binding charge of +7 at pH 4.0. Binding of the channel polypeptide to negative membranes at pH 8 is minimal, whereas initial binding at pH 4 followed by a shift to pH 8 causes only 3-10% reversal of binding, implying that it is kinetically trapped, probably by a hydrophobic interaction. It was inferred that membrane binding and insertion involves an initial electrostatic interaction responsible for concentration and binding to the membrane surface. This is followed by insertion into the bilayer driven by hydrophobic forces, which are countered in the case of excessive electrostatic binding.

Binding Sites↗

PubMed1995

Structure-function of the channel-forming colicins.

The channel-forming colicins are plasmid-encoded bacteriocins that kill E. coli and related cells and whose mode of action is of interest in related problems of protein import and toxicology. Colicins parasitize metabolite receptors in the outer membrane and translocate across the periplasm with the aid of the Tol or Ton protein systems. X-ray structure data for the channel domain and colicin are available. Residues have been identified that affect the channel ion selectivity and particular helices implicated in channel structure and in conformational changes required for binding or insertion of the channel into the membrane. Unique aspects of the colicin channel system are the involvement of protein import in the gating process, the existence of multiple open and closed states, and the existence and action of an immunity protein that involves specific intramembrane helix-helix interactions with transmembrane helices of the colicin channel-forming domains.

Amino Acid Sequence↗

PubMed1994

Characterization of the chloroplast cytochrome b6f complex as a structural and functional dimer.

Size analysis of the cytochrome b6f complex by FPLC Superose-12 chromatography and Blue Native PAGE indicated a predominantly dimeric component with M(r) = (1.9-2.5) x 10(5). The true dimer molecular weight including bound lipid, but not detergent, was estimated to be 2.3 x 10(5). Size and shape analysis by negative-stain single-particle electron microscopy indicated that the preparation of dimeric complexes contains a major population that has a protein cross section 40% larger than the monomer, binds more negative stain, and has a geometry with a distinct 2-fold axis of symmetry compared to the monomeric complex. The dimeric species is more stable at higher ionic strength with respect to conversion to the monomeric species. SDS-PAGE of monomer and dimer preparations indicated that both contain the four major polypeptides in approximately equal stoichiometry and also contain the petG M(r) 4000 subunit. One bound chlorophyll a per monomer, part of the bound lipid, is present in monomer and dimer. The in vitro electron-transport activity (decyl-PQH2-->PC-ferricyanide) of the separated dimer was comparable to that of the isolated b6f complex and was 4-5-fold greater than that of the monomer preparation, whose activity could be attributed to residual dimer. No difference in the properties of the dimer and monomer was detected by SDS-PAGE or redox difference spectrophotometry that could account for the difference in activities. However, the concentration of the Rieske [2Fe-2S] center was found by EPR analysis of the gy = 1.90 signal to be lower in the monomer fraction by a factor of 3.5 relative to the dimer.(ABSTRACT TRUNCATED AT 250 WORDS)

Biopolymers↗

PubMed1994

Structural aspects of the cytochrome b6f complex; structure of the lumen-side domain of cytochrome f.

The following findings concerning the structure of the cytochrome b6f complex and its component polypeptides, cyt b6, subunit IV and cytochrome f subunit are discussed: (1) Comparison of the amino acid sequences of 13 and 16 cytochrome b6 and subunit IV polypeptides, respectively, led to (a) reconsideration of the helix lengths and probable interface regions, (b) identification of two likely surface-seeking helices in cyt b6 and one in SU IV, and (c) documentation of a high degree of sequence invariance compared to the mitochondrial cytochrome. The extent of identity is particularly high (88% for conserved and pseudoconserved residues) in the segments of cyt b6 predicted to be extrinsic on the n-side of the membrane. (2) The intramembrane attractive forces between trans-membrane helices that normally stabilize the packing of integral membrane proteins are relatively weak. (3) The complex isolated in dimeric form has been visualized, along with isolated monomer, by electron microscopy. The isolated dimer is much more active than the monomer, is the major form of the complex isolated and purified from chloroplasts, and is inferred to be a functional form in the membrane. (4) The isolated cyt b6f complex contains one molecule of chlorophyll a. (5) The structure of the 252 residue lumen-side domain of cytochrome f isolated from turnip chloroplasts has been solved by X-ray diffraction analysis to a resolution of 2.3 A.

Amino Acid Sequence↗