Biomedical subjects

J Benavente

Publications and source records attributed to J Benavente.

At least 19 recordsLinked to original sources

PubMed2006

Early steps in avian reovirus morphogenesis.

Avian reoviruses are important pathogens that may cause considerable economic losses in poultry farming. Their genome expresses at least eight structural and four nonstructural proteins, three of them encoded by the S1 gene. These viruses enter cells by receptor-mediated endocytosis, and acidification of virus-containing endosomes is necessary for the virus to uncoat and release transcriptionally active cores into the cytosol. Avian reoviruses replicate within cytoplasmic inclusions of globular morphology, termed viral factories, which are not microtubule-associated, and which are formed by the nonstructural protein muNS. This protein also mediates the association of some viral proteins (but not of others) with inclusions, suggesting that the recruitment of viral proteins into avian reovirus factories has specificity. Avian reovirus morphogenesis is a complex and temporally controlled process that takes place exclusively within viral factories of infected cells. Core assembly takes place within the first 30 min after the synthesis of their protein components, and fully formed cores are then coated by outer-capsid polypeptides over the next 30 min to generate mature infectious reovirions. Based on data from avian reovirus studies and on results reported for other members of the Reoviridae family, we present a model for avian reovirus gene expression and morphogenesis.

Animals↗

PubMed2005

Modification of active and porous sublayers of aged polyamide/polysulfone composite membranes due to HNO3 treatment: effect of treatment time.

Changes in electrical and transport parameters for aged composite polyamide/polysulfone membrane samples (PAC) and their porous support layers (PSU) as a result of chemical treatment (immersion in 1 M HNO3 solution) at four different times (12 h < or = t < or = 72 h) have been obtained. Salt permeability, ion transport number, and membrane electrical resistance for the treated samples were determined from salt diffusion, membrane potential, and impedance spectroscopy measurements, which were carried out with the membranes in contact with NaCl solutions at different concentrations and compared with those determined for fresh and aged nontreated samples. Results show the strong effect of aging on membrane parameters, particularly the decrease in salt permeability (P(s)) and the increase in membrane electrical resistance (R(m)), while ion transport number is hardly affected by aging, chemical treatment, or treatment time. Results show how the compaction of the porous structure causes by aging (dried membrane matrix structure) can be partially reduced by HNO3 treatment, and they also allow the estimation of 24-h treatment as the optimum time (higher salt permeability and lower membrane electrical resistance), mainly for the polysulfone support layer. The use of equivalent circuits in the analysis of impedance spectroscopy data allows separate estimation of the electrical resistance associated with each sublayer of the composite PAC membrane samples. On the other hand, chemical changes in the active top layer of the PAC membrane (polyamide active layer) were obtained from XPS analysis, which show some modifications in the atomic concentration percentages of the polyamide characteristic elements as a result of acidic treatment time, which are more significant after 72-h acidic immersion.

Journal Article↗

PubMed2005

Modification of polysulfone membranes with polyethylene glycol and lignosulfate: electrical characterization by impedance spectroscopy measurements.

Two sets of composite membranes having an asymmetric sulfonated polysulfone membrane as support layer have been obtained and electrically characterized (membranes SPS-PEG and PA-LIGS). The skin layer of the membrane SPS-PEG contains different percentages of polyethylene glycol in the casting solution (5, 25, 40, and 60 wt%), while lignosulfonate was used for manufacturing PA-LIGS membranes (5, 10, 20, and 40 wt%). Membrane electrical characterization was done by means of impedance spectroscopy (IS) measurements, which were carried out with the membranes in contact with NaCl solutions at different concentrations (10(-3) < or = c(M) < or = 5x10(-2)). Electrical resistance and equivalent capacitance of the different membrane samples were determined from IS plots by using equivalent circuits as models. Results show a clear decrease in the membrane electrical resistance as a result of both polysulfone sulfonation and the increase of the concentration of modifying substances, although a kind of limit concentration was obtained for both polyethylene glycol and lignosulfonate (40 and 20%, respectively). Results also show a decrease of around 90% in electrical resistance due to polysulfone sulfonation, while the value of the dielectric constant (hydrated state) clearly increases.

Electric Impedance↗

PubMed2004

Effect of age and chemical treatments on characteristic parameters for active and porous sublayers of polymeric composite membranes.

Changes in the transport parameters and the chemical nature of the surface of composite polyamide/polysulfone membranes due to both aging and treatment with chemical products (HCl, H(3)NO, and NaOH) have been considered. Hydraulic and salt permeability were obtained from water flow and salt diffusion measurements, respectively, and their values seem to indicate a modification in the structural parameters (porosity/thickness) of aging samples, while HCl and HNO(3) treatments will act in the opposite way. Chemical modifications in the membrane surfaces were studied by X-ray photoelectron spectroscopy (XPS), which mainly show the effect of H(3)NO and HCl on the polyamide active layer of the membranes (polyamide oxidation), but no chemical damage for that sublayer. Electrical characterization of both sublayers of the composite membranes were determined from impedance spectroscopy (IS) measurements using equivalent circuits as models, and these results indicate: (i) a strong increase of the membrane electrical resistance as a consequence of aging, mainly that associated with the active sublayer (30 times higher for an old sample than for a fresh one) and treatment with NaOH; (ii) the reduction of this effect when the samples were treated with HCl and HNO(3) solutions. Changes in the values of the electrical resistance of the composite membranes are in agreement with those obtained for permeabilities, but the electrical parameter also allows the determination of the contribution of each sublayer.

Journal Article↗

PubMed2003

Assessment of urban and industrial contamination levels in the bay of Cádiz, SW Spain.

Measuring the amount of pollution is of particular importance in assessing the quality and general condition of an ecosystem. In this paper, some of the results obtained as a consequence of the specific agreement between the Environmental Agency (Consejería de Medio Ambiente, Junta de Andalucía) and the University of Cadiz to assess the environmental condition of the marine bottom and waters are showed. Physical and chemical analyses in water and sediments were undertaken at various sampling sites close to urban and industrial locations. Later on, these results were studied under statistical analysis to reveal any possible relationships between the parameters employed, and to identify any analogous behaviour between the sampling sites. Physical-chemical data revealed that sediments and waters analysed were moderately contaminated and, in addition, no great differences were found between in rising and ebbing tide conditions. Finally, considering only the pollution level, from the cluster analysis of sediments two major groups appear, one of which corresponded to those sites located in the outer bay, and the other to those situated in the inner bay. However, number 6 and 14 sampling sites cannot be associated to those groups due to be related to points with important local discharges.

Cities↗

PubMed2002

Effect of hydration of polyamide membranes on the surface electrokinetic parameters: surface characterization by x-ray photoelectronic spectroscopy and atomic force microscopy.

The surface and the solid/liquid interface of two polyamide membranes, one experimental (B0) and one commercial (NF45), have been characterized by X-ray photoelectronic spectroscopy (XPS), atomic force microscopy (AFM), and zeta potential, respectively. The surface roughness, determined by AFM data analysis, is different for the two membranes, and results show that the commercial NF45 membrane presents a much lower roughness than the experimental B0 membrane. XPS data indicate that the surface of membrane NF45 is similar to that of pure polyamide, while membrane B0 contains a considerable amount of impurities. The homogeneity in depth of both membranes was also studied by determining the composition profile at different analysis angles. Streaming potential along the membrane surface or tangential streaming potential (TSP) measurements with NaCl solutions at different concentrations were carried out with both membranes to determine the zeta potential and the electrokinetic surface charge density, and a correlation between membrane surface and interface parameters is made. Some differences in atomic concentrations of membrane surface elements and X-ray photoelectronic spectra of the samples used in TSP measurements and after a drying process at 90 degrees C for 24 h can be observed when they are compared with those for fresh membranes. Electrokinetic parameters for membrane NF45 (TSP, zeta potential, and surface electrokinetic charge density) obtained from three different series of measurements strongly decrease as a result of membrane use, but for membrane B0 they are practically independent of the number of measurements. This difference in the electrokinetic behavior of the two membranes has been related to the hydration process of the surface for each sample studied by XPS and AFM.

Journal Article↗

PubMed2002

Electrochemical characterization of an asymmetric nanofiltration membrane with NaCl and KCl solutions: influence of membrane asymmetry on transport parameters.

Electrochemical characterization of a nanofiltration asymmetric membrane was carried out by measuring membrane potential, salt diffusion, and electrical parameters (membrane electrical resistance and capacitance) with the membrane in contact with NaCl and KCl solutions at different concentrations (10(-3)< or =c(M)< or =5 x 10(-2)). From these experiments characteristic parameters such as the effective concentration of charge in the membrane, ionic transport numbers, and salt and ionic permeabilities across the membrane were determined. Membrane electrical resistance and capacitance were obtained from impedance spectroscopy (IS) measurements by using equivalent circuits as models. This technique allows the determination of the electrical contribution associated with each sublayer; then, assuming that the dense sublayer behaves as a plane capacitor, its thickness can be estimated from the capacitance value. The influence of membrane asymmetry on transport parameters have been studied by carrying out measurements for the two opposite external conditions. Results show that membrane asymmetry strongly affects membrane potential, which is attributed to the Donnan exclusion when the solutions in contact with the dense layer have concentrations lower than the membrane fixed charge (X(ef) approximately -0.004 M), but for the reversal experimental condition (high concentration in contact with the membrane dense sublayer) the membrane potential is practically similar to the solution diffusion potential. The comparison of results obtained for both electrolytes agrees with the higher conductivity of KCl solutions. On the other hand, the influence of diffusion layers at the membrane/solution interfaces in salt permeation was also studied by measuring salt diffusion at a given NaCl concentration gradient but at five different solutions stirring rates.

Journal Article↗

PubMed2002

A comparison of electrochemical and electrokinetic parameters determined for cellophane membranes in contact with NaCl and NaNO3 solutions.

Electrochemical and electrokinetic characterizations of cellophane membrane samples have been carried out by measuring membrane potential, salt diffusion, and tangential streaming potential, which allow the determination of different characteristic membrane parameters. Experiments were made with the membrane samples in contact with NaCl and NaNO(3) solutions at different concentrations and under different external conditions (concentration gradients), in order to obtain differences in transport and membrane characteristic parameters, depending on the electrolyte considered. Salt permeability across the membrane, which was obtained from diffusion measurements, is about twice as high for NaCl solutions as for NaNO(3) solutions, which is attributed to the different sizes of the electrolytes. Membrane potential measurements keeping the concentration ratio constant (C(1)/C(2)=2) were used to determine both the effective fixed charge concentration in the membrane, X(f), and the average value of transport numbers, t(i); taking into account these values, concentration dependence of membrane potential under a different external condition (C(1)=cte=0.01 M, 5 x 10(-3)< or =C(M)< or =5 x 10(-2)) was predicted. Results show that cellophane membrane behaves as a weak cation-exchange membrane and its permselectivity to cations is practically independent of the electrolyte considered. From electrokinetic results, assuming a Langmuir-type adsorption of anions on the cellophane surface, the number of accessible sites per surface unit was obtained, which is higher for Cl(-) than for NO(3)(-), in agreement with the small radii of chlorine ions; however, no significant differences in the specific adsorption free energy were found (DeltaG(Nacl)=-22.0 x 10(3) J/mol) and (DeltaG(NaNO(3))=-23.2 x 10(3) J/mol).

Journal Article↗

PubMed2001

The avian reovirus genome segment S1 is a functionally tricistronic gene that expresses one structural and two nonstructural proteins in infected cells.

The avian reovirus S1 gene contains three partially overlapping, out-of-phase open reading frames (ORFs) that the highly conserved in all avian reovirus strains examined to date. The three S1 ORFs of the avian reovirus strain S1133 were individually expressed in bacterial cells, and their purified translation products used as antigens to raise specific polyclonal antibodies. With these antibodies we were able to demonstrate that all three S1 ORFs from different avian reovirus strains are translatable in infected cells. Proteins p10 and p17, which are specified by ORF1 and ORF2, respectively, are nonstructural proteins which associate with cell membranes, whereas ORF3 directs the synthesis of protein sigma C, a structural oligomeric protein responsible for cell attachment. While intracellular synthesis of protein sigma C was demonstrated a long time ago and that of protein p10 was reported recently, this is the first time that expression of the S1 ORF2 has been demonstrated experimentally. Thus, the previously reported coding capacity of the avian reovirus genome is now expanded to 14 proteins, of which ten are structural (lambda A, lambda B, lambda C, microA, microB, microBC, microBN, sigma A, sigma B, and sigma C) and four are nonstructural (microNS, sigma NS, p17, and p10). Finally, protein p10, but not p17 or sigma C, induces cell-cell fusion when transiently expressed in mammalian cells, supporting a previously published observation that the polypeptide encoded by the S1 ORF1 plays an important role in the syncytial phenotype displayed by avian reoviruses.

Animals↗

PubMed2000

Oligomerization and cell-binding properties of the avian reovirus cell-attachment protein sigmaC.

Avian reovirus protein sigmaC, the viral cell-attachment protein, is a minor component of the outer-capsid shell of the viral particle that is synthesized in small amounts in infected cells. We cloned the sigmaC-encoding ORF in vector pIL-2f, expressed it in Escherichia coli, and partially purified the resulting recombinant protein from inclusion bodies. Rabbit polyclonal antibodies raised against the recombinant protein specifically recognized the viral polypeptide in ELISA, immunoprecipitation, and Western blotting. To study the oligomerization capacity and cell-binding affinity of protein sigmaC, the sigmaC-encoding ORF was also expressed in chicken embryo fibroblasts (CEFs) and in reticulocyte lysates. In all three systems protein sigmaC is expressed as a multimer with identical electrophoretic mobility to the naturally occurring protein. Cell-binding experiments show that both in vitro and in vivo expressed protein sigmaC display affinity for CEF receptors, and this property is exclusively associated with the oligomeric form of the protein. The fact that incubation of CEF cells with the recombinant protein expressed in bacterial cells completely blocks the binding of purified reovirions indicates both that binding of this protein to cells is specific and saturable, and that reovirions and protein sigmaC bind to the same class of cell receptor. Saturation binding experiments, performed with the recombinant protein expressed in E. coli and with purified reovirions, showed that the number of cellular receptor sites (CRSs) for avian reovirus S1133 is 1.8 x 10(4) per CEF cell, whereas the number of cellular receptor units (CRUs) for sigmaC is 2.2 x 10(5) per CEF cell. These results are consistent with previous reports on the binding of mammalian reoviruses.

Animals↗

PubMed2000

Optimal conditions for the growth, purification and storage of the avian reovirus S1133.

In spite of their importance as avian pathogens causing important losses in poultry farming, the biochemistry of avian reoviruses has been little investigated. In order to facilitate the handling of these agents in the laboratory, a study was carried out to establish the best conditions both for growing the avian reovirus S1133 in primary cultures of chicken embryo fibroblasts and for purification and storage of viral suspensions. The results indicate that the conditions used currently for the manipulation of mammalian reoviruses are not always the best for handling their avian counterparts. In particular, avian reoviruses are much less stable than mammalian reoviruses, and specific conditions for the purification and storage of avian reoviruses therefore should be used. Furthermore, the instability of avian reovirions may have important implications for the life cycle and pathogenesis of the virus within the animal host.

Animals↗

PubMed2000

Possible involvement of the double-stranded RNA-binding core protein sigmaA in the resistance of avian reovirus to interferon.

Treatment of primary cultures of chicken embryo fibroblasts with a recombinant chicken alpha/beta interferon (rcIFN) induces an antiviral state that causes a strong inhibition of vaccinia virus and vesicular stomatitis virus replication but has no effect on avian reovirus S1133 replication. The fact that avian reovirus polypeptides are synthesized normally in rcIFN-treated cells prompted us to investigate whether this virus expresses factors that interfere with the activation and/or the activity of the IFN-induced, double-stranded RNA (dsRNA)-dependent enzymes. Our results demonstrate that extracts of avian-reovirus-infected cells, but not those of uninfected cells, are able to relieve the translation-inhibitory activity of dsRNA in reticulocyte lysates, by blocking the activation of the dsRNA-dependent enzymes. In addition, our results show that protein sigmaA, an S1133 core polypeptide, binds to dsRNA in an irreversible manner and that clearing this protein from extracts of infected cells abolishes their protranslational capacity. Taken together, our results raise the interesting possibility that protein sigmaA antagonizes the IFN-induced cellular response against avian reovirus by blocking the intracellular activation of enzyme pathways dependent on dsRNA, as has been suggested for several other viral dsRNA-binding proteins.

Animals↗

PubMed1999

A new double-stranded RNA mycovirus from Botrytis cinerea.

A simple double-stranded RNA mycovirus was detected in a wild-type Botrytis cinerea 55k strain. The virus was located in the fungus cytoplasm as free particles of approximately 28 nm in diameter. The mycovirus possesses a single double-stranded genome segment of 1.8 kilobase pairs (kbp) encapsidated within an isometric protein coat whose main structural component is a polypeptide of 68 kDa. Cells infected with this virus showed an important degree of cellular degeneration.

Botrytis↗

PubMed1998

[Metanephric adenoma. A new embryonal tumor of the kidney].

Metanephric adenoma is a kidney tumour first identified in 1988 and classified within the group of nephroblastic tumours. It is described as a benign tumour with no capacity to become malignant or metastatic, predominant in women in a 2:1 ratio relative to men, and which can develop at any point in life. In most cases, it is incidentally found as a result of an abdominal ultrasound study for signs and symptoms unrelated to the kidney. Less commonly it presents with pain, polycythemia, haematuria or palpable mass. The key radiologic sign is calcification, which occurs in a statistically higher proportion than in any other renal neoplasia. From the pathoanatomical point of view, the tumour consists of small acinus separated by acellular stroma resembling the hamartomatous elements of nephroblastomatosis and Wilms' tumour. This paper contributes one case of metanephric adenoma, the first one in the national literature.

Adenoma↗

PubMed1997

Permeabilization of mammalian cells to proteins: poliovirus 2A(pro) as a probe to analyze entry of proteins into cells.

Two hybrid protein molecules containing the poliovirus protease 2A (MBP-2A(pro)) (maltose-binding protein-2A(pro) and MBP-Pseudomonas exotoxin A-2A(pro)) have been constructed and purified. Both hybrid proteins efficiently cleave the translation initiation factor eIF-4G when they are co-internalized into cells with adenovirus particles. Almost no intact eIF-4G can be detected in cells incubated with these proteins following this method. Reovirus infectious subviral particles also promote the delivery of MBP-2A(pro) into cells, although less efficiently than adenovirus particles. None of the other methods employed to permeabilize cells to MBP-2A(pro) achieves the degree of eIF-4G cleavage observed with adenovirus particles. By comparison about 30% of cells electroporated with MBP-2A(pro) still contain intact eIF-4G. More drastic electroporation conditions lead to a significant decrease of cell survival. Osmotic lysis of pinocytic vesicles resulted in 30% of the eIF-4G being cleaved in cells treated in suspension. Delivery of MBP-2A(pro) by pH-sensitive liposomes leads to poor hydrolysis of eIF-4G. Taken together our results indicate that permeabilization of cells with adenovirus particles is the most efficient method for introducing MBP-2A(pro) into cells.

ADP Ribose Transferases↗

PubMed1997

Protein architecture of avian reovirus S1133 and identification of the cell attachment protein.

There are a number of discrepancies in the literature regarding the protein composition of the avian reoviruses. The present study demonstrates that avian reovirus S1133 contains at least 10 proteins (lambdaA, lambdaB, lambdaC, muA, muB, muBC, muBN, sigmaA, sigmaB, and sigmaC). Polypeptides muB, muBC, muBN, sigmaB, and sigmaC are components of the outer capsid layer of the virus, while lambdaA, lambdaB, muA, and sigmaA are core polypeptides. Protein lambdaC is a component of both layers, extending from the inner core to the outer capsid. The minor outer-capsid polypeptide sigmaC is shown to be the cell attachment protein, since it is the only viral polypeptide present in extracts of S1133-infected cells that binds specifically to chicken embryo fibroblasts; furthermore, its binding to avian cells was competitively inhibited by S1133 reovirions but not by mammalian reovirions. Our results also show that sigmaC is an oligomeric protein both in the virion and free in the cytoplasm, and preliminary results suggest that the multimer is made up of three monomeric units.

Animals↗

PubMed1996

The entry of reovirus into L cells is dependent on vacuolar proton-ATPase activity.

Inhibitors of vacuolar proton-ATPase activity (5 microM bafilomycin A1 or 50 nM concanamycin A) prevented infection by reovirus particles but not by infectious subviral particles (ISVPs). Neither compound affected virus attachment or internalization. However, both compounds potently blocked cleavage of the viral protein mu 1C. Finally, both reovirus particles and ISVPs efficiently translocated the toxin alpha-sarcin to the cytosol during virus entry. Bafilomycin A1 blocked translocation of alpha-sarcin by reovirus particles but not by ISVPs.

Animals↗

PubMed1996

Intracellular posttranslational modifications of S1133 avian reovirus proteins.

Avian reovirus S1133 specifies at least 10 primary translation products, eight of which are present in the viral particle and two of which are nonstructural proteins. In the work presented here, we studied the covalent modifications undergone by these translation products in the infected cell. The structural polypeptide mu2 was shown to be intracellularly modified by both myristoylation and proteolysis. The site-specific cleavage of mu2 yielded a large carboxy-terminal fragment and a myristoylated approximately 5,500-Mr peptide corresponding to the amino terminus. Both mu2 and its cleavage products were found to be structural components of the reovirion. Most avian reovirus proteins were found to be glycosylated and to have a blocking group at the amino terminus. In contrast to the mammalian reovirus system, none of the avian reovirus polypeptides was found to incorporate phosphorus during infection. Our results add to current understanding of the similarities and differences between avian and mammalian reoviruses.

Amino Acid Sequence↗