Biomedical subjects

J C H Zeegers

Publications and source records attributed to J C H Zeegers.

4 recordsLinked to original sources

PubMed2005

An aeroacoustically driven thermoacoustic heat pump.

The mean flow of gas in a pipe past a cavity can excite the resonant acoustic modes of the cavity--much like blowing across the top of a bottle. The periodic shedding of vortices from the leading edge of the mouth of the cavity feeds energy into the acoustic modes which, in turn, affect the shedding of the next vortex. This so-called aeroacoustic whistle can excite very high amplitude acoustic standing waves within a cavity defined by coaxial side branches closed at their ends. The amplitude of these standing waves can easily be 20% of the ambient pressure at optimal gas flow rates and ambient pressures within the main pipe. A standing wave thermoacoustic heat pump is a device which utilizes the in-phase pressure and displacement oscillations to pump heat across a porous medium thereby establishing, or maintaining, a temperature gradient. Experimental results of a combined system of aeroacoustic sound source and a simple thermoacoustic stack will be presented.

Journal Article↗

PubMed2005

Acoustic power measurements of a damped aeroacoustically driven resonator.

Strong self-sustained acoustic oscillations may occur in a gas pipe network under certain gas flow velocities within the network. The pipe network under consideration consists of a main pipe, with a variable mean airflow, with two closed coaxial side branches of variable but equal length joined to the main pipe. Coupling between resonant acoustic standing waves and instabilities of the shear layers separating the flow in the main pipe from the stagnant gas in the closed side branches leads to strong acoustic oscillations at a frequency corresponding to the half-wavelength acoustic mode defined by the total side-branch length. An acoustic damper consisting of a variable acoustic resistance and compliance is used to dissipate power from the resonating mode. The response of the aeroacoustically driven resonator to variable damping will be examined for different fluid flow regimes as well as side-branch geometries.

Journal Article↗

PubMed2002

The optimal stack spacing for thermoacoustic refrigeration.

The characteristic pore dimension in the stack is an important parameter in the design of thermoacoustic refrigerators. A quantitative experimental investigation into the effect of the pore dimensions on the performance of thermoacoustic devices is reported. Parallel-plate stacks with a plate spacing varying between 0.15 and 0.7 mm are manufactured and measured. The performance measurements show that a plate spacing in the stack of 0.25 mm (2.5 deltak) is optimum for the cooling power. A spacing of 0.4 mm (4 deltak) leads to the lowest temperature. The optimum spacing for the performance is about 0.3 mm (3 deltak). It is concluded that a plate spacing in the stack of about three times the penetration depth should be optimal (3 deltak) for thermoacoustic refrigeration.

Journal Article↗

PubMed2002

Prandtl number and thermoacoustic refrigerators.

From kinetic gas theory, it is known that the Prandtl number for hard-sphere monatomic gases is 2/3. Lower values can be realized using gas mixtures of heavy and light monatomic gases. Prandtl numbers varying between 0.2 and 0.67 are obtained by using gas mixtures of helium-argon, helium-krypton, and helium-xenon. This paper presents the results of an experimental investigation into the effect of Prandtl number on the performance of a thermoacoustic refrigerator using gas mixtures. The measurements show that the performance of the refrigerator improves as the Prandtl number decreases. The lowest Prandtl number of 0.2, obtained with a mixture containing 30% xenon, leads to a coefficient of performance relative to Carnot which is 70% higher than with pure helium.

Journal Article↗