PubMed Health⌕ Search

Biomedical subjects

J Caldentey

Publications and source records attributed to J Caldentey.

At least 19 recordsLinked to original sources
PubMed2001

Solution structure of bacteriophage PRD1 vertex complex.

Bacteriophage PRD1 is a prototype of viruses with an internal membrane. The icosahedral capsid and major coat protein share structural similarity with the corresponding structures of adenovirus. The present study further explores similarities between these viruses, considering the 5-fold vertex assemblies. The vertex structure of bacteriophage PRD1 consists of proteins P2, P5, and P31. The vertex complex mediates host cell binding and controls double-stranded DNA delivery. Quaternary structures and interactions of purified spike proteins were studied by synchrotron radiation x-ray solution scattering. Low resolution models of the vertex proteins P5, P2, and P31 were reconstructed ab initio from the scattering data. Protein P5 is a long trimer that resembles the adenovirus spike protein pIV. The receptor-binding protein P2 is a 15.5-nm long, thin monomer and does not have an adenovirus counterpart. P31 forms a pentameric base with a maximum diameter of 8.5 nm, which is thinner than the adenovirus penton pIII. P5 further polymerize into a nonameric form ((P5(3))(3)). In the presence of P31, P5 associates into a P5(6):P31 complex. The constructed models of these assemblies provided support for a model of vertex assembly onto the virion. Although similar in overall architecture, clear differences between PRD1 and adenovirus spike assemblies have been revealed.

Bacteriophage PRD1↗
PubMed2000

Assembly of bacteriophage PRD1 spike complex: role of the multidomain protein P5.

The spike structure of bacteriophage PRD1 is comprised of proteins P2, P5, and P31. It resembles the corresponding receptor-binding structure of adenoviruses. We show that purified recombinant protein P5 is an elongated (30 x 2.7 nm; R(h) = 5.5 nm), multidomain trimer which can slowly associate into nonamers. Cleavage of the 340 amino acid long P5 with collagenase yields 2 fragments. The larger, 205 amino acid long C-terminal fragment appears to contain the residues responsible for the trimerization of the protein, whereas the smaller N-terminal part mediates the interaction of P5 with the pentameric vertex protein P31 (24 x 2.5 nm, R(h) = 4.2 nm). In addition, the presence of the N-terminal sequence is required for the formation of the P5 nonamer. The results presented here suggest that P5 and P31 form an elongated adaptor complex at the 5-fold vertexes of the virion which anchors the adsorption protein P2 (21 x 2.5 nm; R(h) = 4.1 nm). Our results also suggest that the P5 trimer forms a substantial part of the viral spike shaft that was previously thought to be composed exclusively of protein P2.

Amino Acid Motifs↗
PubMed2000

The assembly factor P17 from bacteriophage PRD1 interacts with positively charged lipid membranes.

The interactions of the assembly factor P17 of bacteriophage PRD1 with liposomes were investigated by static light scattering, fluorescence spectroscopy, and differential scanning calorimetry. Our data show that P17 binds to positively charged large unilamellar vesicles composed of the zwitterionic 1-palmitoyl-2-oleoyl-phosphatidylcholine and sphingosine, whereas only a weak interaction is evident for 1-palmitoyl-2-oleoyl-phosphatidylcholine vesicles. P17 does not bind to negatively charged membranes composed of 1-palmitoyl-2-oleoyl-phosphatidylglycerol and 1-palmitoyl-2-oleoyl-phosphatidylcholine. Our differential scanning calorimetry results reveal that P17 slightly perturbs the phase behaviour of neutral phosphatidylcholine and negatively charged multilamellar vesicles. In contrast, the phase transition temperature of positively charged dimyristoylphosphatidylcholine/sphingosine multilamellar vesicles (molar ratio 9 : 1, respectively) is increased by approximately 2.4 degrees C and the half width of the enthalpy peak broadened from 1.9 to 5.6 degrees C in the presence of P17 (protein : lipid molar ratio 1 : 47). Moreover, the enthalpy peak is asymmetrical, suggesting that lipid phase separation is induced by P17. Based on the far-UV CD spectra, the alpha-helicity of P17 increases upon binding to positively charged micelles composed of Triton X-100 and sphingosine. We propose that P17 can interact with positively charged lipid membranes and that this binding induces a structural change on P17 to a more tightly packed and ordered structure.

Calorimetry, Differential Scanning↗
PubMed1999

Bacteriophage PRD1 contains a labile receptor-binding structure at each vertex.

Bacteriophage PRD1 is a membrane-containing virus with an unexpected similarity to adenovirus. We mutagenized unassigned PRD1 genes to identify minor capsid proteins that could be structural or functional analogs to adenovirus proteins. We report here the identification of an amber mutant, sus525, in an essential PRD1 gene XXXI. The gene was cloned and the gene product was overexpressed and purified to near homogeneity. Analytical ultracentrifugation and gel filtration showed that P31 is a homopentamer of about 70 kDa. The protein was shown to be accessible on the virion surface and its absence in the sus525 particles led to the deficiency of two other viral coat proteins, protein P5 and the adsorption protein P2. Cryo-electron microscopy and image reconstruction of the sus525 particles indicate that these proteins are located on the capsid vertices, because in these particles the entire vertex structure was missing along with the peripentonal major capsid protein P3 trimers. Sus525 particles package DNA effectively but loose it upon purification. All of the PRD1 vertex structures are labile and potentially capable of mediating DNA delivery; this is in contrast to other dsDNA phages which employ a single vertex for packaging and delivery. We propose that this arises from a symmetry mismatch between protein P2 and the pentameric P31 in analogy to that between the adenovirus penton base and the receptor-binding spike.

Adenoviridae↗
PubMed1999

Analysis of the multimeric state of proteins by matrix assisted laser desorption/ionization mass spectrometry after cross-linking with glutaraldehyde.

We have undertaken a systematic study on the suitability of matrix-assisted laser desorption/ionization mass spectrometry to analyze and determine the multimericity of several proteins after cross-linking with glutaraldehyde. Using both commercially available proteins and others of viral origin currently being characterized in our laboratory, we studied the range of concentrations of cross-linker and protein for optimal analysis. Under the conditions developed during this study, we confirmed the multimeric states of three phage PRD1 structural proteins with monomeric masses ranging from 13.5 to 63 kDa. In addition, we addressed the question of the general applicability of the method by using it successfully to confirm the stoichiometry of the heptameric chaperonin GroEL, a bacterial protein with a mass well over 450 kDa.

Animals↗
PubMed1999

Purification and characterization of the assembly factor P17 of the lipid-containing bacteriophage PRD1.

Assembly factors, proteins assisting the formation of viral structures, have been found in many viral systems. The gene encoding the assembly factor P17 of bacteriophage PRD1 has been cloned and expressed in Escherichia coli. P17 acts late in phage assembly, after capsid protein folding and multimerization, and sorting of membrane proteins has occurred. P17 has been purified to near homogeneity. It is a tetrameric protein displaying a rather high heat stability. The protein is largely in an alpha-helical conformation and possesses a putative leucine zipper which is not essential for protein function, as judged by in vitro mutagenesis and complementation analysis. Although heating does not cause structural changes in the conformation of the protein, the dissociation of the tetramer into smaller units is evident as diminished self-quenching of the fluorescently labeled P17. Similarly, dissociation of the tetramer is also obtained by dialysis of the protein against 6-M guanidine hydrochloride (GdnHCl) or 1% SDS. The reassembly of these smaller units upon cooling is evident from resonance energy transfer.

Bacteriophages↗
PubMed1999

Stable packaging of phage PRD1 DNA requires adsorption protein P2, which binds to the IncP plasmid-encoded conjugative transfer complex.

The double-stranded DNA bacteriophage PRD1 uses an IncP plasmid-encoded conjugal transfer complex as a receptor. Plasmid functions in the PRD1 life cycle are restricted to phage adsorption and DNA entry. A single phage structural protein, P2, located at the fivefold capsid vertices, is responsible for PRD1 attachment to its host. The purified recombinant adsorption protein was judged to be monomeric by gel filtration, rate zonal centrifugation, analytical ultracentrifugation, and chemical cross-linking. It binds to its receptor with an apparent K(d) of 0.20 nM, and this binding prevents phage adsorption. P2-deficient particles are unstable and spontaneously release the DNA with concomitant formation of the tail-like structure originating from the phage membrane. We envisage the DNA to be packaged through one vertex, but the presence of P2 on the other vertices suggests a mechanism whereby the injection vertex is determined by P2 binding to the receptor.

Adsorption↗
PubMed1995

Genetic and biochemical characterization of the Lactobacillus delbrueckii subsp. lactis bacteriophage LL-H lysin.

LL-H, a virulent phage of Lactobacillus delbrueckii subsp. lactis, produces a peptidoglycan-degrading enzyme, Mur, that is effective on L. delbrueckii, Lactobacillus acidophilus, Lactobacillus helveticus, and Pediococcus damnosus cell walls. In this study, the LL-H gene mur was cloned into Escherichia coli, its nucleotide sequence was determined, and the enzyme produced in E. coli was purified and biochemically characterized. Mur was purified 112-fold by means of ammonium sulfate precipitation and cation-exchange chromatography. The cell wall-hydrolyzing activity was found to be associated with a 34-kDa protein. The C-terminal domain of Mur is not essential for catalytic activity since it can be removed without destroying the lytic activity. The N-terminal sequence of the purified lysin was identical to that deduced from the nucleotide sequence, but the first methionine is absent from the mature protein. The N-terminal part of this 297-amino-acid protein had homology with several Chalaropsis-type lysozymes. Reduction of purified and Mur-digested L. delbrueckii cell wall material with labeled NaB3H4 indicated that the enzyme is a muramidase. The temperature optimum of purified Mur is between 30 and 40 degrees C, and the pH optimum is around 5.0. The LL-H lysin Mur is stable at temperatures below 60 degrees C.

Amino Acid Sequence↗
PubMed1994

Gene XV of bacteriophage PRD1 encodes a lytic enzyme with muramidase activity.

Bacteriophage PRD1 is a lipid-containing virus that infects a variety of Gram-negative bacteria, including Escherichia coli. The phage lyses its host by virtue of a virally-encoded lytic enzyme, the synthesis of which has been assigned to gene XV on the basis of complementation analysis and experiments with mutant phages. We report here the cloning of gene XV into an expression plasmid and the purification of its product, protein P15, to near homogeneity. The purified protein P15, identified by N-terminal sequence analysis, showed a strong lytic activity against chloroform-treated Gram-negative cells. No activity against Gram-positive bacterial species could be detected. The pH optimum of the enzyme was between 7.0-8.0. Protein P15 was readily inactivated at temperatures above 4 degrees C, as well as by increasing the ionic strength of the buffers. The analysis of cell wall digests indicated that P15 is a glycosidase that cleaves the beta (1-4) linkage between N-acetylmuramic acid and N-acetylglucosamine, thus displaying muramidase activity.

Amino Acid Sequence↗
PubMed1993

In vitro replication of bacteriophage PRD1 DNA. Characterization of the protein-primed initiation site.

Bacteriophage PRD1 replicates its DNA by means of a protein-primed replication mechanism. Using single-stranded oligonucleotide templates carrying the sequence corresponding to the 25 first bases of the 3' end of PRD1 DNA, and Mg2+ as the activating metal ion of the phage DNA polymerase, we show that the fourth base from the 3' end of the template directs, by base complementarity, the dNMP to be linked to the phage terminal protein (TP) in the initiation reaction. This result suggests that phage PRD1 maintains its 3' end DNA sequences via a sliding-back mechanism. The single-stranded DNA templates could not be replicated by the PRD1 DNA polymerase, much in contrast to the natural TP-DNA. Nevertheless, the analysis of the transition products obtained with TP-DNA and origin-containing oligonucleotides suggests that sliding-back occurs stepwise, the fourth base being the directing position during the entire process.

Bacteriophages↗
PubMed1993

Overproduction, purification, and characterization of DNA-binding protein P19 of bacteriophage PRD1.

The early protein, P19, of bacteriophage PRD1 was purified after overexpression of the cloned gene, XIX, in Escherichia coli DH5 alpha cells. The purified protein binds as multimers to single-stranded DNA (ssDNA), and with a lower affinity to double-stranded DNA (dsDNA), without sequence-specificity. Two distinct P19-ssDNA complexes were discovered in gel- mobility-shift assays at different protein:DNA ratios. P19 was capable of fully protecting ssDNA against nuclease P1. Electron microscopy of protein P19-ssDNA complexes showed DNA molecules which were extensively coated with protein and whose contour length was clearly reduced by P19 binding. The results suggest that P19 binds to ssDNA with moderate cooperativity and are consistent with the DNA being wrapped around the P19 multimers.

Bacteriophages↗
PubMed1993

Dissociation of the lipid-containing bacteriophage PRD1: effects of heat, pH, and sodium dodecyl sulfate.

The double-stranded DNA bacteriophage PRD1 replicates in Escherichia coli and Salmonella typhimurium. It has an outer protein coat surrounding a membrane. The phage lipids are derived from the host, but the membrane proteins are of phage origin. In this investigation we studied the effects of heat, pH, and sodium dodecyl sulfate on the integrity of phage particles. Heat and high pH result in the release of the main coat protein, P3, as trimers, whereas treatment of phage particles with detergent results in the solubilization of the membrane. Our results enable a distinction to be made between the phage structural proteins that are embedded in the lipid bilayer and those that appear to be more loosely associated with the membrane.

Capsid↗
PubMed1992

The lytic enzyme of the Pseudomonas phage phi 6. Purification and biochemical characterization.

The lytic enzyme of the lipid-containing bacteriophage phi 6, protein P5, has been purified to apparent homogeneity from disrupted viral particles. The enzyme is a monomer with a molecular mass of approx. 24 kDa. The optimal pH for P5 activity is 8.5 and the protein is readily inactivated at temperatures above 20 degrees C. Protein P5 is active against several Gram-negative bacteria, but no activity against Gram-positive species was detected. Analysis of cell wall digests indicates that P5 is not a glycosidase, but an endopeptidase splitting the peptide bridge formed by meso-diaminopimelic acid and D-alanine.

Bacteriophage phi 6↗
PubMed1992

In vitro replication of bacteriophage PRD1 DNA. Metal activation of protein-primed initiation and DNA elongation.

Bacteriophage PRD1 replicates its DNA by means of a protein-primed replication mechanism. Compared to Mg2+, the use of Mn2+ as the metal activator of the phage DNA polymerase results in a great stimulation of the initiation reaction. The molecular basis of the observed stimulatory effect is an increase in the velocity of the reaction. The phage DNA polymerase is also able to catalyze the formation of the initiation complex in the absence of DNA template. Although the presence of Mn2+ does not affect either the polymerization activity or the processivity of the DNA polymerase, this metal is unable to activate the overall replication of the phage genome. This can be explained by a deleterious effect of Mn2+ on the 3'-5'-exonucleolytic and/or the strand-displacement activity, the latter being an intrinsic function of the viral DNA polymerase required for protein-primed DNA replication.

Bacteriophages↗
PubMed1991

Overexpression, purification, and characterization of Escherichia coli bacteriophage PRD1 DNA polymerase. In vitro synthesis of full-length PRD1 DNA with purified proteins.

The bacteriophage PRD1 DNA polymerase gene (gene I) has been cloned into the expression vector pPLH101 under the control of the lambda pL promoter. Tailoring of an efficient ribosome binding site in front of the gene by polymerase chain reaction led to a high level heat-inducible expression of the corresponding gene product (P1) in Escherichia coli cells. Expression was confirmed in vivo by complementation of phage PRD1 DNA polymerase gene mutants and in vitro by formation of the genome terminal protein P8-dGMP replication initiation complex. Expressed PRD1 DNA polymerase was purified to apparent homogeneity in an active form. DNA polymerase, 3'-5'-exonuclease, and P8-dGMP replication initiation complex formation activities cosedimented in glycerol gradient with a protein of 65 kDa, the size expected for PRD1 DNA polymerase. The DNA polymerase was active on DNase I-activated calf thymus DNA, poly(dA).oligo(dT) and poly(dA-dT) primer/templates as well as on native phage PRD1 genome. The 3'-5'-exonuclease activity was specific for single-stranded DNA and released mononucleotides. No 5'-3'-exonuclease activity was detected. The inhibitor/activator spectrum of the PRD1 DNA polymerase was also studied. An in vitro replication system with purified components for bacteriophage PRD1 was established. Formation of the P8-dGMP replication initiation complex was a prerequisite for phage DNA replication, which proceeded from the initiation complex and yielded genome length replication products.

Bacteriophages↗
PubMed1990

Characterization of a DNA binding protein of bacteriophage PRD1 involved in DNA replication.

Escherichia coli phage PRD1 protein P12, involved in PRD1 DNA replication in vivo, has been highly purified from E. coli cells harbouring a gene XII-containing plasmid. Protein P12 binds to single-stranded DNA as shown by gel retardation assays and nuclease protection experiments. Binding of protein P12 to single-stranded DNA increases about 14% the contour length of the DNA as revealed by electron microscopy. Binding to single-stranded DNA seems to be cooperative, and it is not sequence specific. Protein P12 also binds to double-stranded DNA although with an affinity 10 times lower than to single-stranded DNA. Using the in vitro phage phi 29 DNA replication system, it is shown that protein P12 stimulates the overall phi 29 DNA replication.

Coliphages↗
PubMed1989

Bacteriophage PRD1 terminal protein: expression of gene VIII in Escherichia coli and purification of the functional P8 product.

The gene VIII coding for the bacteriophage PRD1 terminal protein P8 has been cloned under the control of the lambda pL promoter. The recombinant plasmid thus obtained (pUSH20) was able to complement a mutation in the phage terminal-protein gene VIII. High expression of the cloned gene from this plasmid could be obtained by raising the growth temperature from 28 to 42 degrees C. This heat induction resulted in an increased synthesis of a protein of 30 kDa, the size expected for the P8 protein. When complemented with an extract of cells carrying the PRD1 DNA polymerase gene, the extract from the cells harboring the plasmid pUSH20 was able to form the P8-dGMP replication initiation complex. The PRD1 replication initiation reaction was optimized and used to detect the biological activity of the expressed terminal protein. Subsequently, P8 protein was purified to almost homogeneity and shown to be biologically functional after the various purification steps.

Bacteriophages↗