PubMed Health⌕ Search

Biomedical subjects

J Damborský

Publications and source records attributed to J Damborský.

At least 19 recordsLinked to original sources

Identification of protein fold and catalytic residues of gamma-hexachlorocyclohexane dehydrochlorinase LinA.

gamma-Hexachlorocyclohexane dehydrochlorinase (LinA) is a unique dehydrochlorinase that has no homologous sequence at the amino acid-sequence level and for which the evolutionary origin is unknown. We here propose that LinA is a member of a novel structural superfamily of proteins containing scytalone dehydratase, 3-oxo-Delta(5)-steroid isomerase, nuclear transport factor 2, and the beta-subunit of naphthalene dioxygenase-all known structures with different functions. The catalytic and the active site residues of LinA are predicted on the basis of its homology model. Nine mutants that carry substitutions of the proposed catalytic residues were constructed by site-directed mutagenesis. In addition to these, eight mutants that have a potential to make contact with the substrate were prepared by site-directed mutagenesis. These mutants were expressed in Escherichia coli, and their activities in crude extract were evaluated. Most of the features of the LinA mutants could be explained on the basis of the present LinA model, indicating its validity. We conclude that LinA catalyzes the proton abstraction via the catalytic dyad H73-D25 by a similar mechanism as described for scytalone dehydratase. The results suggest that LinA and scytalone dehydratase evolved from a common ancestor. LinA may have evolved from an enzyme showing a dehydratase activity.

Amino Acid Sequence↗

Comparative binding energy analysis of the substrate specificity of haloalkane dehalogenase from Xanthobacter autotrophicus GJ10.

Comparative binding energy (COMBINE) analysis was conducted for 18 substrates of the haloalkane dehalogenase from Xanthobacter autotrophicus GJ10 (DhlA): 1-chlorobutane, 1-chlorohexane, dichloromethane, 1,2-dichloroethane, 1,2-dichloropropane, 2-chloroethanol, epichlorohydrine, 2-chloroacetonitrile, 2-chloroacetamide, and their brominated analogues. The purpose of the COMBINE analysis was to identify the amino acid residues determining the substrate specificity of the haloalkane dehalogenase. This knowledge is essential for the tailoring of this enzyme for biotechnological applications. Complexes of the enzyme with these substrates were modeled and then refined by molecular mechanics energy minimization. The intermolecular enzyme-substrate energy was decomposed into residue-wise van der Waals and electrostatic contributions and complemented by surface area dependent and electrostatic desolvation terms. Partial least-squares projection to latent structures analysis was then used to establish relationships between the energy contributions and the experimental apparent dissociation constants. A model containing van der Waals and electrostatic intermolecular interaction energy contributions calculated using the AMBER force field explained 91% (73% cross-validated) of the quantitative variance in the apparent dissociation constants. A model based on van der Waals intermolecular contributions from AMBER and electrostatic interactions derived from the Poisson-Boltzmann equation explained 93% (74% cross-validated) of the quantitative variance. COMBINE models predicted correctly the change in apparent dissociation constants upon single-point mutation of DhlA for six enzyme-substrate complexes. The amino acid residues contributing most significantly to the substrate specificity of DhlA were identified; they include Asp124, Trp125, Phe164, Phe172, Trp175, Phe222, Pro223, and Leu263. These residues are suitable targets for modification by site-directed mutagenesis.

Binding Sites↗

Biochemical characterization of broad-specificity enzymes using multivariate experimental design and a colorimetric microplate assay: characterization of the haloalkane dehalogenase mutants.

The pH indicator dye-based colorimetric method and multivariate experimental design were used for the systematic biochemical characterization of the broad-specificity enzymes haloalkane dehalogenases. Halogenated compounds for characterization of the enzymes were selected using Principal Component Analysis. The substrates were characterised by 24 physico-chemical and structural descriptors. Thirty-four substrates were selected for testing out of 194 halogenated compounds. Relative activities determined using the optimised colorimetric microplate assay were validated against the catalytic constants determined by gas chromatography. The applicability of the assay was tested with F151L, F154L and F169L mutants of the haloalkane dehalogenase from Sphingomonas paucimobilis UT26.

Colorimetry↗

Plectin repeats and modules: strategic cysteines and their presumed impact on cytolinker functions.

Plectin, a member of the cytolinkers protein family, plays a crucial role in cells as a stabilizing element of cells against mechanical stress. Its absence results in muscular dystrophy, skin blistering, and signs of neuropathy. The C-terminal domain of plectin contains several highly homologous repeat domains that also occur in other cytolinkers. Secondary structure analysis revealed that the building block of these domains, the PLEC repeat, is similar to the ankyrin repeat. We present a model that attempts to explain how the C-terminal domain, which comprises approximately 1900 amino acid, could be stabilized to maintain its structural integrity even under extensive mechanical stress. In this model, larger solenoid modules formed from PLEC repeats can be disulfide-bridged via conserved cysteines. Our hypothesis suggests that this process could be mediated by cytoplasmic NOS-generated products, such as the radical peroxynitrite. Reinforcement of molecular structure would provide a rationale why during exercising or physical stress radicals are formed without necessarily being deleterious. This article contains supplementary material that may be viewed at the BioEssays website at http://www.interscience.wiley.com/jpages/0265-9247/suppmat/23/v23_11.1064.html.

Amino Acid Sequence↗

Insights into the functional architecture of the catalytic center of a maize beta-glucosidase Zm-p60.1.

The maize (Zea mays) beta-glucosidase Zm-p60.1 has been implicated in regulation of plant development by the targeted release of free cytokinins from cytokinin-O-glucosides, their inactive storage forms. The crystal structure of the wild-type enzyme was solved at 2.05-A resolution, allowing molecular docking analysis to be conducted. This indicated that the enzyme specificity toward substrates with aryl aglycones is determined by aglycone aromatic system stacking with W373, and interactions with edges of F193, F200, and F461 located opposite W373 in a slot-like aglycone-binding site. These aglycone-active site interactions recently were hypothesized to determine substrate specificity in inactive enzyme substrate complexes of ZM-Glu1, an allozyme of Zm-p60.1. Here, we test this hypothesis by kinetic analysis of F193I/Y/W mutants. The decreased K(m) of all mutants confirmed the involvement of F193 in determining enzyme affinity toward substrates with an aromatic aglycone. It was unexpected that a 30-fold decrease in k(cat) was found in F193I mutant compared with the wild type. Kinetic analysis and computer modeling demonstrated that the F193-aglycone-W373 interaction not only contributes to aglycone recognition as hypothesized previously but also codetermines catalytic rate by fixing the glucosidic bond in an orientation favorable for attack by the catalytic pair, E186 and E401. The catalytic pair, assigned initially by their location in the structure, was confirmed by kinetic analysis of E186D/Q and E401D/Q mutants. It was unexpected that the E401D as well as C205S and C211S mutations dramatically impaired the assembly of a catalysis-competent homodimer, suggesting novel links between the active site structure and dimer formation.

Amino Acid Sequence↗

Structure-specificity relationships for haloalkane dehalogenases.

A structural analysis of the substrate specificity of hydrolytic dehalogenases originating from three different bacterial isolates has been performed using the multiple computer-automated structure evaluation methodology. This methodology identifies structural fragments in substrate molecules that either activate or deactivate biological processes. The analysis presented in this contribution is based on newly measured dehalogenation data combined with data from the literature (91 substrates). The enzymes under study represent different specificity classes of haloalkane dehalogenases (haloalkane dehalogenase from Xanthobacter autotrophicus GJ10, Rhodococcus erythropolis Y2, and Sphingomonas paucimobilis UT26). Three sets of structural rules have been identified to explain their substrate specificity and to predict activity for untested substrates. Predictions of activity and inactivity based on the structural rules from this analysis were provided for those compounds that were not yet tested experimentally. Predictions were also made for the compounds with available experimental data not used for the model construction (i.e., the external validation set). Correct predictions were obtained for 28 of 30 compounds in the validation set. Incorrect predictions were noted for two substrates outside the chemical domain of the set of compounds for which the structural rules were generated. A mechanistic interpretation of the structural rules generated provided a fundamental understanding of the structure-specificity relationships for the family of haloalkane dehalogenases.

Biodegradation, Environmental↗

Reaction mechanism and stereochemistry of gamma-hexachlorocyclohexane dehydrochlorinase LinA.

gamma-Hexachlorocyclohexane dehydrochlorinase (LinA) catalyzes the initial steps in the biotransformation of the important insecticide gamma-hexachlorocyclohexane (gamma-HCH) by the soil bacterium Sphingomonas paucimobilis UT26. Stereochemical analysis of the reaction products formed during conversion of gamma-HCH by LinA was investigated by GC-MS, NMR, CD, and molecular modeling. The NMR spectra of 1,3,4,5,6-pentachlorocyclohexene (PCCH) produced from gamma-HCH using either enzymatic dehydrochlorination or alkaline dehydrochlorination were compared and found to be identical. Both enantiomers present in the racemate of synthetic gamma-PCCH were converted by LinA, each at a different rate. 1,2,4-trichlorobenzene (1,2,4-TCB) was detected as the only product of the biotransformation of biosynthetic gamma-PCCH. 1,2,4-TCB and 1,2,3-TCB were identified as the dehydrochlorination products of racemic gamma-PCCH. delta-PCCH was detected as the only product of dehydrochlorination of delta-HCH. LinA requires the presence of a 1,2-biaxial HCl pair on a substrate molecule. LinA enantiotopologically differentiates two 1,2-biaxial HCl pairs present on gamma-HCH and gives rise to a single PCCH enantiomer 1,3(R),4(S),5(S),6(R)-PCCH. Furthermore, LinA enantiomerically differentiates 1,3(S),4(R),5(R),6(S)-PCCH and 1,3(R),4(S),5(S),6(R)-PCCH. The proposed mechanism of enzymatic biotransformation of gamma-HCH to 1,2,4-TCB by LinA consists of two 1,2-anti conformationally dependent dehydrochlorinations followed by 1,4-anti dehydrochlorination.

Bacterial Proteins↗

Crystal structure of the haloalkane dehalogenase from Sphingomonas paucimobilis UT26.

The haloalkane dehalogenase from Sphingomonas paucimobilis UT26 (LinB) is the enzyme involved in the degradation of the important environmental pollutant gamma-hexachlorocyclohexane. The enzyme hydrolyzes a broad range of halogenated cyclic and aliphatic compounds. Here, we present the 1.58 A crystal structure of LinB and the 2.0 A structure of LinB with 1,3-propanediol, a product of debromination of 1,3-dibromopropane, in the active site of the enzyme. The enzyme belongs to the alpha/beta hydrolase family and contains a catalytic triad (Asp108, His272, and Glu132) in the lipase-like topological arrangement previously proposed from mutagenesis experiments. The LinB structure was compared with the structures of haloalkane dehalogenase from Xanthobacter autotrophicus GJ10 and from Rhodococcus sp. and the structural features involved in the adaptation toward xenobiotic substrates were identified. The arrangement and composition of the alpha-helices in the cap domain results in the differences in the size and shape of the active-site cavity and the entrance tunnel. This is the major determinant of the substrate specificity of this haloalkane dehalogenase.

Binding Sites↗

Determination of haloalkane dehalogenase activity by capillary zone electrophoresis.

A new sensitive method has been developed for the determination of haloalkane dehalogenase activity. The enzymatic reactions were carried out directly in thermostatted autosampler vials and the formation of product - bromide or chloride ions - was monitored by sequential capillary zone electrophoresis runs. The determinations were performed in a 75 microm fused-silica capillary using 5 mM chromate, 0.5 mM tetradecyltrimethylammonium bromide (pH 8.4) as a background electrolyte, separation voltage 15 kV (negative polarity) and indirect detection at sample wavelength 315 nm, reference wavelength 375 nm for brominated and chlorinated substrates, respectively 0.1 M beta-alanine-HCl (pH 3.50) as a background electrolyte, separation voltage 18 kV (negative polarity) and direct detection at 200 nm for brominated substrates. The temperature of capillary was in both cases 25 degrees C. The method is rapid, can be automated, and requires only small amount of enzyme preparation and substrate.

Electrophoresis, Capillary↗

Effect of the carbon source on assessment of degrading bacteria with the spread-plating technique during in situ bioremediation.

Spread-plating belongs to traditional microbiological methods employed for quantification of subsurface microflora during bioremediation projects in the Czechia. Concentration of degrading organisms is estimated from the number of colonies grown on agar plates supplied with contaminant as the sole carbon source. The data obtained during in situ bioremediation of the Dacice site contaminated by cutting oil suggests that changes in the composition of the carbon source in the subsurface may cause a discrepancy between laboratory data and situation in subsurface.

Bacteria↗

Molecular characterization of the Thermomonospora curvata aglA gene encoding a thermotolerant alpha-1,4-glucosidase.

The cloning, sequencing and structural characterization of a gene encoding a thermostable alpha-1,4-glucosidase from Thermomonospora curvata is described. DNA sequence analysis revealed four open reading frames designated aglA, aglR, aglE and aglF. The aglA gene encodes a thermostable alpha-1,4-glucosidase from T. curvata and is situated between two genes, aglR and aglE. Genes aglA, aglE and aglF are transcribed in the same direction, while aglR is transcribed in the opposite direction. By comparing the amino acid sequence of the alpha-1,4-glucosidase from T. curvata with other alpha-glucanases, it appears that the enzyme is a member of the alpha-amylase family. The proteins of this family have an (alpha/beta)8 barrel super secondary structure. The topology of the alpha-1,4-glucosidase was predicted by computer-assisted analysis. The topology of the secondary structures of the alpha-1,4-glucosidase resembles the structure of barley alpha-amylase, but the primary structure resembles most closely the oligo-1,6-glucosidase from Bacillus cereus. Putative catalytic residues (D221, E281 and D343) and calcium binding residues (N116, E179, D191, H224 or G225) are proposed.

Actinomycetales↗

TRITON: in silico construction of protein mutants and prediction of their activities.

MOTIVATION: One of the objectives of protein engineering is to propose and construct modified proteins with improved activity for the substrate of interest. Systematic computational investigation of many protein variants requires the preparation and handling of a large number of data files. The type of the data generated during the modelling of protein variants and the estimation of their activities offers the possibility of process automatization. RESULTS: The graphical program TRITON has been developed for modelling protein mutants and assessment of their activities. Protein mutants are modelled from the wild type structure by homology modelling using the external program MODELLER. Chemical reactions taking place in the mutants active site are modelled using the semi-empirical quantum mechanic program MOPAC. Semi-quantitative predictions of mutants activities can be achieved by evaluating the changes in energies of the system and partial atomic charges of active site residues during the reaction. The program TRITON offers graphical tools for the preparation of the input data files, for calculation and for the analysis of the generated output data. AVAILABILITY: The program TRITON can run under operating systems IRIX, Linux and NetBSD. The software is available at http://www.chemi.muni.cz/lbsd/triton.ht ml.

Binding Sites↗

Dehalogenation of haloalkanes by Mycobacterium tuberculosis H37Rv and other mycobacteria.

Haloalkane dehalogenases convert haloalkanes to their corresponding alcohols by a hydrolytic mechanism. To date, various haloalkane dehalogenases have been isolated from bacteria colonizing environments that are contaminated with halogenated compounds. A search of current databases with the sequences of these known haloalkane dehalogenases revealed the presence of three different genes encoding putative haloalkane dehalogenases in the genome of the human parasite Mycobacterium tuberculosis H37Rv. The ability of M. tuberculosis and several other mycobacterial strains to dehalogenate haloaliphatic compounds was therefore studied. Intact cells of M. tuberculosis H37Rv were found to dehalogenate 1-chlorobutane, 1-chlorodecane, 1-bromobutane, and 1,2-dibromoethane. Nine isolates of mycobacteria from clinical material and four strains from a collection of microorganisms were found to be capable of dehalogenating 1,2-dibromoethane. Crude extracts prepared from two of these strains, Mycobacterium avium MU1 and Mycobacterium smegmatis CCM 4622, showed broad substrate specificity toward a number of halogenated substrates. Dehalogenase activity in the absence of oxygen and the identification of primary alcohols as the products of the reaction suggest a hydrolytic dehalogenation mechanism. The presence of dehalogenases in bacterial isolates from clinical material, including the species colonizing both animal tissues and free environment, indicates a possible role of parasitic microorganisms in the distribution of degradation genes in the environment.

Alkanes↗

Identification of the catalytic triad in the haloalkane dehalogenase from Sphingomonas paucimobilis UT26.

The haloalkane dehalogenase from Sphingomonas paucimobilis UT26 (LinB) is the enzyme involved in the gamma-hexachlorocyclohexane degradation. This enzyme hydrolyses a broad range of halogenated aliphatic compounds via an alkyl-enzyme intermediate. LinB is believed to belong to the family of alpha/beta-hydrolases which employ a catalytic triad, i.e. nucleophile-histidine-acid, during the catalytic reaction. The position of the catalytic triad within the sequence of LinB was probed by a site-directed mutagenesis. The catalytic triad residues of the haloalkane dehalogenase LinB are proposed to be D108, H272 and E132. The topological location of the catalytic acid (E132) is after the beta-strand six which corresponds to the location of catalytic acid in the pancreatic lipase, but not in the haloalkane dehalogenase of Xanthobacter autotrophicus GJ10 which contains the catalytic acid after the beta-strand seven.

Binding Sites↗

Construction and characterization of histidine-tagged haloalkane dehalogenase (LinB) of a new substrate class from a gamma-hexachlorocyclohexane-degrading bacterium, Sphingomonas paucimobilis UT26.

The linB gene product (LinB), which is involved in the degradation of gamma-hexachlorocyclohexane in Sphingomonas paucimobilis UT26, is a member of haloalkane dehalogenases with a broad range of substrate specificity. Elucidation of the factors determining its substrate specificity is of interest. Aiming to facilitate purification of recombinant LinB protein for site-directed mutagenesis analysis, a 6-histidyl tail was added to the C-terminus of LinB. The His-tagged LinB was specifically bound with Ni-NTA resin in the buffer containing 10 mM imidazole. After elution with 500 mM imidazole, quantitative recovery of protein occurred. The steady-state kinetic parameters of the His-tagged LinB for four substrates were in good agreement with that of wild-type recombinant LinB. Although the His-tagged LinB expressed in an average of 80% of the activity of the wild type LinB for 10 different substrates, the decrease was very similar for different substrates with the standard deviation of 5.5%. The small activity reduction is independent of the substrate shape, size, or number of substituents, indicating that the His-tagged LinB can be used for further mutagenesis studies. To confirm the suitability of this system for mutagenesis studies, two mutant proteins with substitution in putative halide binding residues (W109 and F151) were constructed, purified, and tested for activity. As expected, complete loss in activity of W109L and sustained activity of F151W were observed.

Base Sequence↗

Tetrachloroethene-dehalogenating bacteria.

Tetrachloroethene is a frequent groundwater contaminant often persisting in the subsurface environments. It is recalcitrant under aerobic conditions because it is in a highly oxidized state and is not readily susceptible to oxidation. Nevertheless, at least 15 organisms from different metabolic groups, viz. halorespirators (9), acetogens (2), methanogens (3) and facultative anaerobes (2), that are able to metabolize tetrachloroethene have been isolated as axenic cultures to-date. Some of these organisms couple dehalo-genation to energy conservation and utilize tetrachloroethene as the only source of energy while others dehalogenate tetrachloroethene fortuitously. Halorespiring organisms (halorespirators) utilize halogenated organic compounds as electron acceptors in an anaerobic respiratory process. Different organisms exhibit differences in the final products of tetrachloroethene dehalogenation, some strains convert tetrachloroethene to trichloroethene only, while others also carry out consecutive dehalogenation to dichloroethenes and vinyl chloride. Thus far, only a single organism, 'Dehalococcoides ethenogenes' strain 195, has been isolated which dechlorinates tetrachloroethene all the way down to ethylene. The majority of tetrachloroethene-dehalogenating organisms have been isolated only in the past few years and several of them, i.e., Dehalobacter restrictus, Desulfitobacterium dehalogenans, 'Dehalococcoides ethenogenes', 'Dehalospirillum multivorans', Desulfuromonas chloroethenica, and Desulfomonile tiedjei, are representatives of new taxonomic groups. This contribution summarizes the available information regarding the axenic cultures of the tetrachloroethene-dehalogenating bacteria. The present knowledge about the isolation of these organisms, their physiological characteristics, morphology, taxonomy and their ability to dechlorinate tetrachloroethene is presented to facilitate a comprehensive comparison.

Bacteria↗

Analysis of the reaction mechanism and substrate specificity of haloalkane dehalogenases by sequential and structural comparisons.

Haloalkane dehalogenases catalyse environmentally important dehalogenation reactions. These microbial enzymes represent objects of interest for protein engineering studies, attempting to improve their catalytic efficiency or broaden their substrate specificity towards environmental pollutants. This paper presents the results of a comparative study of haloalkane dehalogenases originating from different organisms. Protein sequences and the models of tertiary structures of haloalkane dehalogenases were compared to investigate the protein fold, reaction mechanism and substrate specificity of these enzymes. Haloalkane dehalogenases contain the structural motifs of alpha/beta-hydrolases and epoxidases within their sequences. They contain a catalytic triad with two different topological arrangements. The presence of a structurally conserved oxyanion hole suggests the two-step reaction mechanism previously described for haloalkane dehalogenase from Xanthobacter autotrophicus GJ10. The differences in substrate specificity of haloalkane dehalogenases originating from different species might be related to the size and geometry of an active site and its entrance and the efficiency of the transition state and halide ion stabilization by active site residues. Structurally conserved motifs identified within the sequences can be used for the design of specific primers for the experimental screening of haloalkane dehalogenases. Those amino acids which were predicted to be functionally important represent possible targets for future site-directed mutagenesis experiments.

Amino Acid Sequence↗

Quantitative structure-function and structure-stability relationships of purposely modified proteins.

Quantitative structure-function relationships (QSFR) and quantitative structure-stability relationships (QSSR) analyses are described here. The objective of these analyses is to investigate and quantitatively describe the effect of the changes in structure of protein on its function or stability. During the analysis, the structural and physico-chemical properties of the amino acid residues are related to activity or stability data derived for the group of proteins containing systematic substitutions at certain positions. Four examples of the application of these analyses on the data obtained with proteins modified by site-directed mutagenesis experiments are provided. Structure-function relationships were studied for 15 mutants in position 172 of the haloalkane dehalogenase and 19 mutants in position 222 of the subtilisin, while the structure-stability relationships were investigated for 13 mutants in position 157 of phage T4 lysozyme and 18 mutants in position 49 of alpha-subunits tryptophan synthase. A total of 402 molecular descriptors derived from AAindex database were used to quantify amino acid properties and the multivariate statistical technique--partial least squares projections to latent structures--was used to identify those of them which are important for explanation of the activity and stability data. Quantitative models were developed and internally validated for every data set. The possibilities for further development of both analyses and their application for predictive and analytical purposes in protein engineering research are discussed.

Glutamic Acid↗