PubMed Health⌕ Search

Biomedical subjects

J E Wyatt

Publications and source records attributed to J E Wyatt.

10 recordsLinked to original sources

Co-elimination of mec and spa genes in Staphylococcus aureus and the effect of agr and protein A production on bacterial adherence to cell monolayers.

Phenotypic loss of protein A production was tested in six methicillin-resistant (McR) Staphylococcus aureus (MRSA) isolates and their isogenic methicillin-sensitive (McS) variants by a radiolabelled IgG-binding assay with washed cells and by Western blotting of supernates prepared from lysed washed cells. Genomic DNA was probed for homology with the protein A gene (spa) in EcoRI digests and for homology to the methicillin resistance gene (mec) in HindIII digests. The McS variants had lost homology with mec. An isogenic pair of McR and McS strains, and derivatives of S. aureus 8325-4 with site-specific mutations of the accessory gene regulator locus (agr) and spa, were tested for adherence to human peritoneal mesothelial cells in monolayer culture. The isogenic pair were also tested for adherence to HEp-2 and Vero cell monolayers in assays with 3H thymidine-labelled bacteria. McR isolates produced protein A which was absent from three strains that had become McS. This correlated with deletion of the spa locus. Spa homology, but reduced production of protein A, was retained in one McS strain which also showed reduced adherence to HEp-2, Vero and mesothelial cells (p < 0.05) compared with the parent McR strain. A spa mutation in strain 8325-4 did not significantly affect adherence to mesothelial cells but mutation in agr increased adherence significantly in both Spa+ and Spa- strains.

Animals↗

Adherence of Staphylococcus aureus to cell monolayers.

Adherence of four strains of Staphylococcus aureus to eukaryotic cell monolayers was assayed with [3H]-thymidine labelled bacterial cells and the results were analysed by non-parametric statistical tests. Adherence to primary (human mesothelial) and semi-continuous (human embryonic lung) cell monolayers was significantly better than to continuous cell lines (HEp2, HeLa and Vero). HEp2 cell monolayers provided the most reliable assay substrate of the continuous cell lines tested. Variation occurred between bacterial culture batches but the assay measured significant differences between adhesion levels of the strains and distinguished between high level (RN92, 8325-4) and low level (Wood46, ISP458) adhering strains. Adherence to different batches of cell monolayers also varied but relative adherence values for strains were similar and the ranking of strains according to adhesion values was unchanged. Potential adhesion mediators have been monitored for their effect on adhesion of a highly adherent strain (RN92) to HEp2 monolayers. Fibronectin, protein A and anti-protein A did not significantly affect adhesion. Lipoteichoic acid caused a significant inhibition of adhesion. With critical statistical analysis to accommodate inherent variations, this assay provides a useful model to study factors involved in adherence of Staph. aureus to eukaryotic cells.

Animals↗

A comparison of the adhesive properties and surface ultrastructure of the fibrillar Streptococcus sanguis 12 and an adhesion deficient non-fibrillar mutant 12 na.

Streptococcus sanguis 12 and a naturally occurring mutant, 12 na, were screened for their ultrastructure and adhesive properties in vitro. Negative staining showed that Strep. sanguis 12 carried three types of surface structure. The majority of cells carried long fibrils that in different batches ranged in length from 80 to 207 nm, and shorter fibrils which were 51.0 +/- 15.7 nm long. Both types of fibrils were primarily located at the poles of the cells. Occasionally cells were seen that carried fimbriae, which are structurally distinct from fibrils, and were 3-4 nm wide and less than 1.0 micron long. Strain 12 na carried no detectable surface structures. Ruthenium red staining revealed that both strains carried a loose, amorphous, extracellular polysaccharide layer attached to the cell wall. Streptococcus sanguis 12 na was 83% less adhesive than strain 12 in a saliva-coated hydroxyapatite assay, and 50% less adhesive in a buccal epithelial cell adhesion assay. In contrast, strain 12 na was more sensitive to aggregation by parotid saliva than strain 12, and both strains were equally aggregated by whole saliva. The cell surface hydrophobicity of the two strains was similar. Extraction of surface proteins by sodium lauroyl-sarcosinate followed by sodium dodecylsulphate polyacrylamide gel electrophoresis demonstrated that Strep. sanguis 12 expressed more high mol.wt proteins on its surface than strain 12 na. Using immunogold labelling, the fibrils of strain 12 labelled well with antiserum directed against the long fibrils, but so did the cell surfaces of both Strep. sanguis 12 and 12 na. High molecular weight proteins and cell surface fibrils may be associated with adhesion in this strain.

Bacterial Adhesion↗

A comparison of the adhesion, coaggregation and cell-surface hydrophobicity properties of fibrillar and fimbriate strains of Streptococcus salivarius.

Fibrillar and fimbriate strains of Streptococcus salivarius were compared for their ability to adhere to buccal epithelial cells and saliva-coated hydroxyapatite beads, and for their ability to coaggregate with Veillonella strains. The fibrillar Lancefield group K strains adhered statistically significantly better to both buccal epithelial cells and saliva-coated hydroxyapatite beads than the fimbriate strains, which lacked the Lancefield group K antigen. After 1 h the fibrillar strains coaggregated statistically significantly better than the fimbriate strains with V. parvula strain V1, but after 24 h, coaggregation both of fibrillar and of fimbriate strains reached approximately 90%. Freshly isolated Veillonella strains all coaggregated with the S. salivarius strains, but the percentage coaggregation varied considerably after 1 h depending on the Veillonella strain. Coaggregation was independent of the presence of Ca2+. S. salivarius strain HB-V5, a mutant of strain HB that had lost the Veillonella-binding protein, coaggregated weakly with V. parvula strain V1, but coaggregated very well with other wild-type veillonellae, suggesting the presence of an alternative mechanism for Veillonella-binding for strain HB. Fibrillar strains were, therefore, more adhesive to oral surfaces and coaggregated with veillonellae after 1 h better than the fimbriate S. salivarius strains. Both fibrillar and fimbriate strains were highly hydrophobic in the hexadecane-buffer partition assay.

Bacterial Adhesion↗

Lack of correlation between fibrils, hydrophobicity and adhesion for strains of Streptococcus sanguis biotypes I and II.

Fifteen strains of Streptococcus sanguis biotype I and eight strains of Streptococcus sanguis biotype II with peritrichous fibrils, tufts of fibrils or a mixture of fibrils and fimbriae on the cell surface, were tested for their ability to adhere to saliva coated spheroidal hydroxyapatite (S-SHA) in a radiolabelled assay. S. sanguis I strains adhered better than S. sanguis II strains and peritrichously fibrillar strains generally adhered better than tufted strains. There was no correlation between the density of fibrillation and adhesion. The only highly adherent strain of S. sanguis II carried fimbriae in addition to fibrils. No correlation was observed between cell surface hydrophobicity as measured by phase partitioning with hexadecane and adhesion to S-SHA.

Bacterial Adhesion↗

Effect of protease on cell surface structure, hydrophobicity and adhesion of tufted strains of Streptococcus sanguis biotypes I and II.

Protease treatment of S. sanguis biotype I strains (AKI and CR311) and S. sanguis biotype II strains (CN3410 and PSH1b) reduced cell surface hydrophobicity of all strains by up to 87.7% and reduced adhesion to saliva coated hydroxyapatite beads (S-SHA) by up to 90%. All four strains carried lateral tufts of fibrils of two lengths on the cells. Tuft fibrils and hydrophobicity were lost simultaneously from S. sanguis II CN3410 when these properties were monitored simultaneously over 3 h. A ruthenium red positive layer, 37 +/- 6 nm thick, outside the cell wall of S. sanguis I CR311 was more resistant than the tuft to protease digestion. After 2 h of protease treatment tuft fibrils of S. sanguis I AKI and 311 were gradually digested while still on the cells, whereas most of the tuft fibrils of S. sanguis II PSH1b remained apparently undamaged on the cells, and tuft fibrils of S. sanguis II CN3410 were removed intact from the cell surface and found in the supernatant.

Bacterial Adhesion↗

Aggregation of Streptococcus sanguis biotypes I and II by parotid saliva: a comparison between peritrichously fibrillar and tufted strains.

Twelve strains of Streptococcus sanguis biotype I and seven strains of Streptococcus sanguis biotype II carrying either peritrichous fibrils or tufts of fibrils, were examined for their susceptibility to aggregation by parotid saliva. Salivary aggregation was evaluated using a spectrophotometric measurement of sedimentation to assess clump size. A clear distinction emerged between structural sub-groups. Irrespective of biotype, strains carrying peritrichous fibrils aggregated strongly whilst tufted strains were little affected. The one strain with peritrichous fimbriae as well as fibrils, was not aggregated by saliva. Pre-treatment of two peritrichously fibrillar strains with parotid saliva reduced their ability to adhere to parotid saliva-coated hydroxyapatite, whereas adhesion of two tufted strains was not inhibited. Inhibition of adhesion may have been due to steric hindrance, but blocking of bacterial adhesins by saliva components could not be discounted.

Bacterial Adhesion↗

Surface structures (peritrichous fibrils and tufts of fibrils) found on Streptococcus sanguis strains may be related to their ability to coaggregate with other oral genera.

We screened 36 strains of Streptococcus sanguis biotype I and 8 strains of S. sanguis biotype II for the presence of surface structures and for their ability to coaggregate with Actinomyces viscosus, Actinomyces naeslundii, and Fusobacterium nucleatum. Negative staining under an electron microscope revealed detectable surface structures on all S. sanguis strains. The majority of strains (38 of 44) carried peritrichous fibrils, which have an irregular profile and no distinct width. They usually appeared as a fringe with a constant width around the cell. Strains selected for measurement had a fringe with an average length of 72.4 +/- 8.5 nm on biotype I strains and 51.6 +/- 3.3 nm on biotype II strains. Some fibrillar biotype I strains carried an additional, longer (158.7 +/- 33.1 nm) type of fibril projecting through the shorter fibrils. Fibrillar density was characteristic for each strain, ranging from very dense on all cells in a population to very sparse on a few cells in a population. A small group of six strains carried tufts of fibrils in a lateral or polar position on the cell. Either one or two lengths of fibril were present in the tuft depending on the strain. One strain carried both peritrichous fibrils and fimbriae. Fimbriae are flexible structures with a constant width (4.5 to 5.0 nm) all along their length but very variable lengths (less than or equal to 0.7 micron) on each cell. S. sanguis I and II both included strains with peritrichous fibrils and tufts of fibrils, but the mixed morphotype strain was confined to biotype II. Fibrils were present on cells at all stages throughout the growth cycle for the strains tested. Freshly isolated fibrillar strains coaggregated consistently well with A. viscosus and A. naeslundii, although some fibrillar reference strains lacked the ability. In addition, all tufted strains could not coaggregate, but the strains with the mixed morphotype coaggregated well. Coaggregation with F. nucleatum was very strong for the fibrillar strains, but less strong for the tufted strains. We discuss the possible correlation between S. sanguis surface structure and ability to coaggregate.

Cell Membrane↗