PubMed Health⌕ Search

Biomedical subjects

J F Esquivel

Publications and source records attributed to J F Esquivel.

12 recordsLinked to original sources

Citrus pollen retention by adult Helicoverpa zea (Lepidoptera: Noctuidae) after exposure to citrus blooms.

In previous migration studies, the presence of citrus pollen on adult Helicoverpa zea (Boddie), in conjunction with synoptic weather systems and 72-h backtrack trajectories, were used to identify source zones of migrants. However, data are lacking regarding the retention of citrus pollen for 72-h by H. zea adults. We exposed laboratory-reared and feral H. zea adults to citrus blooms for a 12-h period in laboratory and field studies and examined insects for the external presence of citrus pollen (i.e., marking) at 12-h intervals through 72 h. Citrus pollen marking was higher for females than males at the time of removal from citrus blooms. Fifteen to 100% of H. zea adults were marked with citrus pollen at 72 h after removal from citrus blooms. Pollen loads ranged from rare (< or = 10 pollen grains) to moderate (101 to 500 grains) during 1995; only rare and light (11 to 100 grains) pollen loads were detected during 1996. Citrus pollen marking of H. zea adults through 72 h after removal from citrus blooms has not been previously confirmed. These data provide evidence of H. zea using available blooming citrus groves in the absence of a host crop and will impact current perspectives regarding H. zea and host plant interactions and timing of pest management tactics.

Animals↗

Control of bias in randomized controlled trials published in prosthodontic journals.

STATEMENT OF PROBLEM: Randomized controlled trials (RCTs) have become the gold standard for evaluating the effectiveness of treatment interventions. If not properly controlled, bias in the design of trial methodology can affect the validity of the study results. PURPOSE: The purpose of this investigation was to assess the methodological quality of RCTs published in 3 prosthodontic journals over a 10-year period. MATERIAL AND METHODS: Issues of The International Journal of Prosthodontics, The Journal of Prosthetic Dentistry, and The Journal of Prosthodontics published between 1988 and 1997 were searched manually to identify RCTs. Specific inclusion and exclusion criteria were established to identify articles about studies that qualified as RCTs. Two independent reviewers evaluated all qualified RCTs on the basis of how potential sources of bias in the trial methodology were controlled. Three areas-control of bias at entry, control of bias in assessment of outcome, and control of bias after entry-were evaluated with a scheme developed through the Cochrane Collaboration. A score of 1 or 0 was assigned for each of the 3 potential sources of bias, with the maximum quality score for an RCT being 3 (good bias control) and the minimum 0 (poor control). Frequencies were calculated for each dimension of trial methodology and overall quality scores of the RCTs. RESULTS: Sixty-two RCTs were identified from 3631 articles screened. The method of randomization was explicit in only 47% of the RCTs. Forty percent of RCTs incorporated blinding in the assessment of outcome, and 76% accounted for all subjects at the end of the study. Overall quality scores revealed that only 16% of RCTs attempted to control bias in all 3 areas examined. Forty percent were deficient in 1 area, 34% were deficient in 2 areas, and 10% were deficient in all areas examined. CONCLUSION: The quality of RCTs published in prosthodontic journals may be improved by minimizing potential sources of bias and adequately reporting trial methodology.

Dental Research↗

Assessment of MEDLINE search strategies for randomized controlled trials in prosthodontics.

PURPOSE: The purpose of this study was to evaluate the sensitivity, specificity, and precision of MEDLINE search strategies for detecting randomized controlled trials (RCTs) in prosthodontics. MATERIALS AND METHODS: A list of RCTs was obtained by hand-searching the International Journal of Prosthodontics, Journal of Prosthetic Dentistry, and Journal of Prosthodontics published between 1988 and 1997. RCTs identified served as the "gold standard" with which different MEDLINE search strategies were compared. Subject headings, keywords, MEDLINE checktags, publication types, and combinations thereof were used, and their results were compared with the "gold standard". RESULTS: Sensitivity ranged from 9% to 67%, specificity was at least 96% for all searches, and precision ranged from 22% to 59%. The most productive searches were by publication type clinical trial and publication type randomized controlled trial. Combining search terms did not improve sensitivity for detecting RCTs published in prosthodontic journals (p > .10). CONCLUSION: These findings support the need for more detailed reporting of trial methodologies to facilitate accurate indexing of prosthodontic articles in MEDLINE.

Humans↗

Developing a register for randomized controlled trials in prosthodontics: results of a search from prosthodontic journals published in the United States.

STATEMENT OF PROBLEM: Treatment decisions are often made despite absence of evidence from well-conducted clinical trials. Conclusions about treatment efficacy derived from nonexperimental approaches often overestimate treatment effect. Randomized controlled trials (RCTs) provide the most reliable basis for evaluating effectiveness of treatment interventions. PURPOSE: This study attempted to identify and catalog RCTs in prosthodontic journals published in the United States as an initial step in creating a register of clinical trials that would be a resource in setting up systemic overviews of prosthodontic literature. METHODS: The International Journal of Prosthodontics, The Journal of Prosthetic Dentistry, and The Journal of Prosthodontics published between 1988 and 1997 were searched manually to identify clinical trials. Clinical trials had to meet the following criteria for inclusion in the register: the trial must involve human subjects, must include at least 2 treatment groups, and treatment group allocation must be randomized. RESULTS: A total of 3,631 articles in 196 journal issues were screened. Sixty-two articles (1.7%) met the minimum criteria for inclusion in the RCT register. CONCLUSION: Given the lack of randomized controlled trials in prosthodontic journals, a concerted effort by the organized prosthodontic community should be made to screen national and international journals and contribute to the development of a register of randomized controlled trials relevant to prosthodontics.

Dental Research↗

Selective-pressure single impression procedure for tooth-mucosa-supported removable partial dentures.

This article describes a method of making impressions for tooth-mucosa-supported removable partial dentures using a single impression procedure. Through the use of border-molded custom trays, selectively relieved, and application of pressure on residual ridge areas, the objectives of maximum tissue coverage and selective tissue placement of primary stress-bearing areas are fulfilled. With a single impression procedure, treatment time is reduced and laboratory errors commonly encountered with the altered cast impression technique can be minimized or eliminated.

Dental Impression Materials↗

Polyvinyl siloxane template aids in recontouring natural teeth opposing single dentures.

This article describes a procedure that provides proper reduction of natural teeth opposing complete dentures. By use of a polyvinyl siloxane prosthetic template, natural dentition can be reduced to a more favorable plane, which will facilitate denture construction. This procedure will eliminate the risk of arbitrary grinding and will minimize guesswork through guided intraoral reduction.

Dental Impression Materials↗

Repair of implant overdenture clip attachments: technical note.

A technique is described for repositioning the clip attachments of implant overdentures during repair or relining procedures using a direct method. During maintenance procedures, clip attachments must be repositioned correctly to prevent torquing of the bar and abutments and precautions taken to avoid locking the prosthesis to the undercut areas of the bar. This technique ensures proper positioning of the attachments and decreases the amount of polymerization shrinkage.

Dental Clasps↗

Simplifying the bead-brush technique.

This article describes a method of controlling monomer addition using the bead-brush technique. With the addition of a cotton pellet to the monomer, incorporation of liquid can adequately be controlled.

Acrylic Resins↗

Stable matrix for amalgam build-up.

A method is proposed of making amalgam build-ups for coronally debilitated teeth through the use of a stable matrix consisting of a disposable tray and polyvinylsiloxane occlusal registration material. For teeth with minimal remaining coronal tooth structure and/or the absence of adjacent teeth, this technique provides proper stabilization of the matrix band to permit adequate condensation of amalgam.

Dental Amalgam↗

Color stability of low-fusing porcelains for titanium.

The resistance to staining of two low-fusing porcelains (Procera and Duceratin) for use with titanium and one conventional feldspathic porcelain (Vita VMK 68) were examined visually according to a protocol similar to the ADA Specification No. 69. The color deviation was also quantified using a colorimeter. Forty samples of each product were prepared using manufacturer's instructions and the samples divided into two groups of 20. The samples of one group were immersed in methylene blue, and the control group in distilled water. Of the twenty samples from each group, ten were ground to remove the glaze. The color values for each sample were recorded prior to and after immersion in the staining medium. The color deviation value, Delta E, for each sample was calculated. Visually discernible stain was present on the unglazed samples of all three porcelain products immersed in methylene blue. No stain was visually detectable on the glazed samples or the unglazed samples immersed in distilled water for all three porcelain products. The objective evaluation confirmed that the unglazed porcelain products had statistically higher color deviation after immersion in methylene blue.

American Dental Association↗

The physical properties of low-fusing porcelains for titanium.

This study compared the firing shrinkages, flexural strengths, and chemical solubilities of two low-fusing porcelains formulated for use with titanium (Procera, Nobel Biocare, Göteborg, Sweden; and Duceratin, Degussa, Plainfield, NJ) to those of a conventional low-fusing feldspathic porcelain (Vita VMK 68, Vident, Baldwin Park, CA). Procera demonstrated the highest mean firing shrinkage and was significantly different from the other two porcelains. There were no significant differences among the porcelains in flexural strength and chemical solubility.

Analysis of Variance↗