PubMed Health⌕ Search

Biomedical subjects

J F McCord

Publications and source records attributed to J F McCord.

At least 19 recordsLinked to original sources

Interventions for replacing missing teeth: denture chewing surface designs in edentulous people.

BACKGROUND: When constructing complete dentures for edentulous patients, ultimately patient satisfaction is key. Complete dentures can be produced with different types of occlusal schemes (chewing surfaces) and it is widely accepted that the occlusal scheme for complete dentures has a direct influence upon their success. OBJECTIVES: To assess the relative effectiveness of differing occlusal schemes for complete dentures with regard to patient satisfaction. The null hypothesis is that there is no difference in terms of patient satisfaction between different designs of chewing surfaces for complete dentures. SEARCH STRATEGY: Several electronic databases were searched in order to identify relevant trials: Cochrane Oral Health Group Trials Register, Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library, Issue 2, 2004), MEDLINE (1966 to week 2 April 2004), OLDMEDLINE (1953 to 1965), EMBASE (1980 to week 16 2004),Zetoc (1993 to December 2003), SIGLE (1980 to December 2003), SCI (Science Citation Index) (1945 to 04 April 2004 ). Reference lists of identified, relevant trials and review articles were scanned. Unpublished data were sought through personal contact with experts in the field. There was no language restriction. SELECTION CRITERIA: Randomised or quasi-randomised controlled clinical trials (RCTs), recruiting edentulous adults, and comparing complete dentures produced with different occlusal schemes with regard to patient satisfaction and masticatory function. DATA COLLECTION AND ANALYSIS: The quality assessment of the included trials was undertaken independently and in duplicate by two reviewers based initially on what was written in the articles. Data were extracted by two reviewers independently. Disagreements were discussed and a third reviewer consulted as necessary. Authors were contacted for clarification or missing information. Data were excluded until further clarification if agreement could not be reached. MAIN RESULTS: 1076 titles and abstracts were identified through the electronic searches. Thirteen trials were thought to be potentially relevant. Ten of these studies were subsequently excluded following further analysis. Two trials require further information from the author before being considered eligible for inclusion. Only one cross-over trial (n = 30), comparing lingualised teeth and zero-degree teeth, fully met the review's inclusion criteria. Twenty patients preferred the lingualised denture, five the zero-degree denture and five patients had no preference. There was a statistically significant difference in favour of the lingualised denture with an odds ratio of 10 (95% confidence interval 2.04 to 48.96). AUTHORS' CONCLUSIONS: There is weak evidence that it may be advantageous, for dentists providing a complete denture service, to prescribe prosthetic posterior teeth with cusps to improve patient satisfaction compared to providing cuspless teeth. However, this conclusion may only be made tentatively until further well conducted trials comparing different occlusal schemes for complete dentures are undertaken.

Adult↗

The quality of dental casts used in crown and bridgework.

OBJECTIVE: To assess the quality of dental casts used in crown and bridge construction. DESIGN: Observational cross-sectional study of dental casts. SETTING: Commercial dental laboratories and a university dental hospital laboratory in the UK. MATERIALS AND METHODS: A sample (n = 150) of working and opposing casts used for crown and bridgework prescribed by general dental practices and a dental hospital were sampled from two commercial dental laboratories and an 'on-site' university dental hospital laboratory respectively. A simple '3 point' assessment scale of quality (good, fair and poor) was used to categorise the casts depending on the clarity of reproduction of soft and hard tissues. RESULTS: The quality of opposing casts used for articulation purposes was significantly better (P<0.001) than that of the working casts. In addition it was found that for working casts the quality in the preparation area(s) was significantly better (p<0.001) than that in areas remote from preparation(s) in the same arch. In general, the quality of casts in the incisal or occlusal surfaces was better than the buccal and lingual surfaces. CONCLUSIONS: This study has demonstrated that variation exists in the quality of casts used in crown and bridgework, specifically those used in the construction of indirect restorations and also those used for articulation purposes. This study highlights the need for clinicians to exercise continued vigilance with crown and bridge impressions, and casts, particularly in areas away from the prepared teeth.

Analysis of Variance↗

An evaluation of the surface changes in PMMA biomaterial formulations as a result of toothbrush/dentifrice abrasion.

OBJECTIVES: The objective of this study was to evaluate the abrasion resistance and surface roughness of two injection-molded poly(methylmethacrylate) denture base materials (SR-Ivocap 'Plus', Ipsyl 60 RV), and also one compression-molded material (Trevalon). A fourth group of specimens (prepared from Trevalon using the injection-molding procedure) was compared to the compression-molded specimens. METHODS: Ten specimens were prepared according to manufacturers' instructions. An experiment involving toothbrush and dentifrice abrasion was performed on all specimens from each of the materials and the cumulative percentage weight-loss was calculated after 100,000 brush strokes. A series of surface roughness profile measurements were also obtained from each specimen within the groups. The data were analysed by using the Kolmogorov-Smirnov test. A level of significance of 0.017 was set in order to adjust for multiple comparisons between the three sets of materials. RESULTS: There was found to be no statistically significant difference between the three groups of materials in terms of percentage weight-loss, and no statistically significant difference between the Trevalon specimens when injection-molded or compression-molded. In terms of surface roughness, however, SR-Ivocap 'Plus' recorded the lowest surface roughness profile of the three groups. It was found that there was a statistically significant difference (P<0.017) between this material and Ipsyl RV 60 (producing the highest roughness), and compression-molded Trevalon. Furthermore, there was found to be no statistically significant difference between injection-molded and compression-molded specimens of Trevalon with regard to surface texture. SIGNIFICANCE: From a clinical standpoint, the surface roughness results suggest SR-Ivocap 'Plus' to be the material most likely to produce the least suitable substrate for the accumulation of denture plaque.

Acrylic Resins↗

What do patients expect from complete dentures?

OBJECTIVES: An investigation was undertaken with the aim of determining whether patients wearing complete dentures in dental hospital (DH) and dental practice (DP) had different expectations from their dentures, together with their requirements for information about denture construction and oral and denture care. METHODS: A total of 214 edentulous patients, with a mean age of 69 years, from DP (125) and DH (89) participated in the questionnaire-based study. A valid questionnaire (P-DEQ) was constructed which demonstrated good test-retest reliability (Cronbach's alpha 0.86). The P-DEQ sought to determine how patients responded to a series of questions related to what dentists are urged to achieve with complete dentures. The questions covered not only what might be termed "normative" expectations but also patients' perceived needs for further information about the stages of prosthodontic treatment and oral or denture care. RESULTS: Significant differences (p< or =0.001) emerged between the two groups; 82% of the DH group thought it essential that their dentures caused no pain compared with 59% of the DP group; for "absence of slackness" (DH 87%; DP 65%), and "good bite" (DH 82%; DP 55%). No significant differences emerged for the other parameters investigated, but both groups had high expectations for ease of chewing, speech, and good appearance. Differences (p<0.05) between the groups also emerged with respect to the demand for more information regarding the stages involved in denture construction (DH 57%, DP 76%) and how to care for dentures (DH 75%, DP 89%). Large proportions of patients from both groups would prefer to have more information about the selection of teeth (71% DH, 72% DP), and how to care for their mouths (84% DH, 86% DP), but there were no differences between the groups in these parameters. CONCLUSIONS: Most patient expectations appear to equate with the normative view expressed in standard prosthodontic texts. However, expectations may differ not only between individuals but also between patient groups managed in teaching hospital and DP settings. Edentulous patients also need information regarding the stages involved in denture construction and how to care for their mouths and dentures. This may have implications for the management of edentulous patients in DP and dental hospital.

Aged↗

Embracing change.

Explore the source record for details and available documents.

Attitude to Health↗

Research in dental practice: a 'SWOT' analysis.

Most dental treatment, in most countries, is carried out in general dental practice. There is therefore a potential wealth of research material, although clinical evaluations have generally been carried out on hospital-based patients. Many types of research, such as clinical evaluations and assessments of new materials, may be appropriate to dental practice. Principal problems are that dental practices are established to treat patients efficiently and to provide an income for the staff of the practice. Time spent on research therefore cannot be used for patient treatment, so there are cost implications. Critics of practice-based research have commented on the lack of calibration of operative diagnoses and other variables; however, this variability is the stuff of dental practice, the real-world situation. Many of the difficulties in carrying out research in dental practice may be overcome. For the enlightened, it may be possible to turn observations based on the volume of treatment carried out in practice into robust, clinically related and relevant research projects based in the real world of dental practice.

Attitude of Health Personnel↗

Variations in tooth preparations for resin-bonded all-ceramic crowns in general dental practice.

OBJECTIVE: To investigate variations in tooth preparations for resin-bonded all-ceramic crowns (RBCs) in general dental practice (GDP). DESIGN: Laboratory-based retrospective analysis of dies for RBCs. SETTING: General dental practices in the UK and Ireland (2000). METHODS: A sample (n = 132) of laboratory models containing 180 tooth preparations for RBCs, featuring work from different general dental practitioners was obtained from four commercial dental laboratories. Aspects of the preparations were quantified and compared with accepted criteria defined following a review of the literature. RESULTS: The teeth found to be most frequently prepared for RBCs were maxillary incisors (41%). Margin positions were variably positioned with 29% of the preparations on the buccal aspect having subgingival margins. There were many tooth preparation dies for low fusing RBCs (47%) and Chameleon Fortress RBCs (62%) demonstrating overpreparation in the mesiodistal plane. The majority of the margins (84% buccally and 79% lingually) of the dies examined exhibited appropriate shoulder or chamfer finishes. Of the Chameleon Fortress preparations analysed, 86% had been underprepared occlusally. 42% of the teeth had been prepared with no regard to tooth morphology and demonstrated just one plane of reduction. The majority (93%) of the clinicians failed to provide any information regarding the shade of the prepared tooth stump. CONCLUSIONS: On the evidence of this survey of this sample of general dental practitioners' work, it was found that relevant guidelines for the preparations of RBCs are not being fully adhered to.

Crowns↗

Good occlusal practice in removable prosthodontics.

The loss of teeth may result in patients experiencing problems of a functional, aesthetic and psychological nature. This section addresses the very important subject of occlusal considerations for partial and complete dentures. The occlusion is particularly important given the bearing that occlusal factors have, especially on edentulous patients.

Alveolar Process↗

Specific clinical problem areas.

In this final article of the series, the clinical and technical aspects of a range of similar forms of immediate prosthesis are discussed. Similarly, copy denture and reline/rebase procedures are detailed.

Dental Prosthesis, Implant-Supported↗

Technical aspects of complete denture construction.

This article deals with technical aspects of complete dentures as well as the importance of good communication between the clinician and the technician. The objectives for technicians for each component are discussed.

Communication↗