PubMed Health⌕ Search

Biomedical subjects

J Feldmann

Publications and source records attributed to J Feldmann.

At least 19 recordsLinked to original sources

Increase in rice grain arsenic for regions of Bangladesh irrigating paddies with elevated arsenic in groundwaters.

Concern has been raised by Bangladeshi and international scientists about elevated levels of arsenic in Bengali food, particularly in rice grain. This is the first inclusive food market-basket survey from Bangladesh, which addresses the speciation and concentration of arsenic in rice, vegetables, pulses, and spices. Three hundred thirty aman and boro rice, 94 vegetables, and 50 pulse and spice samples were analyzed for total arsenic, using inductivity coupled plasma mass spectrometry (ICP-MS). The districts with the highest mean arsenic rice grain levels were all from southwestern Bangladesh: Faridpur (boro) 0.51 > Satkhira (boro) 0.38 > Satkhira (aman) 0.36 > Chuadanga (boro) 0.32 > Meherpur (boro) 0.29 microg As g(-1). The vast majority of food ingested arsenic in Bangladesh diets was found to be inorganic; with the predominant species detected in Bangladesh rice being arsenite (AsIII) or arsenate (AsV) with dimethyl arsinic acid (DMAV) being a minor component. Vegetables, pulses, and spices are less important to total arsenic intake than water and rice. Predicted inorganic arsenic intake from rice is modeled with the equivalent intake from drinking water for a typical Bangladesh diet. Daily consumption of rice with a total arsenic level of 0.08 microg As g(-1) would be equivalent to a drinking water arsenic level of 10 microg L(-1).

Arsenates↗

Variation in arsenic speciation and concentration in paddy rice related to dietary exposure.

Ingestion of drinking water is not the only elevated source of arsenic to the diet in the Bengal Delta. Even at background levels, the arsenic in rice contributes considerably to arsenic ingestion in subsistence rice diets. We set out to survey As speciation in different rice varieties from different parts of the globe to understand the contribution of rice to arsenic exposure. Pot experiments were utilized to ascertain whether growing rice on As contaminated soil affected speciation and whether genetic variation accounted for uptake and speciation. USA long grain rice had the highest mean arsenic level in the grain at 0.26 microg As g(-1) (n = 7), and the highest grain arsenic value of the survey at 0.40 microg As g(-1). The mean arsenic level of Bangladeshi rice was 0.13 microg As g(-1) (n = 15). The main As species detected in the rice extract were AsIII, DMAV, and AsV. In European, Bangladeshi, and Indian rice 64 +/- 1% (n = 7), 80 +/- 3% (n = 11), and 81 +/- 4% (n = 15), respectively, of the recovered arsenic was found to be inorganic. In contrast, DMAV was the predominant species in rice from the USA, with only 42 +/- 5% (n = 12) of the arsenic being inorganic. Pot experiments show that the proportions of DMAV in the grain are significantly dependent on rice cultivar (p = 0.026) and that plant nutrient status is effected by arsenic exposure.

Arsenicals↗

Gold nanoparticles quench fluorescence by phase induced radiative rate suppression.

The fluorescence quantum yield of Cy5 molecules attached to gold nanoparticles via ssDNA spacers is measured for Cy5-nanoparticle distances between 2 and 16 nm. Different numbers of ssDNA per nanoparticle allow to fine-tune the distance. The change of the radiative and nonradiative molecular decay rates with distance is determined using time-resolved photoluminescence spectroscopy. Remarkably, the distance dependent quantum efficiency is almost exclusively governed by the radiative rate.

Carbocyanines↗

Wave function engineering in elongated semiconductor nanocrystals with heterogeneous carrier confinement.

We explore two routes to wave function engineering in elongated colloidal CdSe/CdS quantum dots, providing deep insight into the intrinsic physics of these low-dimensional heterostructures. Varying the aspect ratio of the nanoparticle allows control over the electron-hole overlap (radiative rate), and external electric fields manipulate the interaction between the delocalized electron and the localized hole. In agreement with theory, this leads to an exceptional size dependent quantum confined Stark effect with field induced intensity modulations, opening applications as electrically switchable single photon sources.

Journal Article↗

Experimental evidence for exciton scaling effects in self-assembled molecular wires.

Resonant Rayleigh scattering from self-assembled one-dimensional molecular J-aggregate wires reveals a distinct dependence of the exciton energy on the width of lateral extension. For the J aggregates used in this study, strong in-line dipole coupling leads to a delocalization of the exciton wave function over several molecular units. Polarization dependent measurements of resonantly scattered light from the wires show that the exciton dipole moment is oriented perpendicular to the long axis. The experimental observations can be described by applying a quantization condition to the center of mass motion of the J-band exciton in the wires.

Journal Article↗

Monitoring surface charge movement in single elongated semiconductor nanocrystals.

We demonstrate a universal correlation between the spectral linewidth and position of the excitonic transition in the spectral jitter observed from single elongated colloidal quantum dots. Breaking the symmetry of electron and hole confinement as well as of the spatial directions for surface charge diffusion enables us to microscopically track meandering surface charges, providing a novel probe of the particle's nanoenvironment. Spectral diffusion exhibits only a weak temperature dependence, which allows us to uncover the single particle homogeneous linewidth of 50 meV at room temperature.

Journal Article↗

Arsenic speciation in hair extracts.

Ingested arsenic is known to be not only excreted by urine, but to be stored in sulphydryl-rich tissue like hair, nail or skin. We developed an extraction method for arsenic species from these tissues and studied the stability of different arsenic species during the extraction process. Inorganic and pentavalent methylated arsenic was found to be stable under the extraction conditions, whereas trivalent methylated arsenicals and the thio-analogue of DMA(V) (DMAS) showed reduced stability. The absorption ability of hair for these different species was studied as well. Inorganic arsenic is better absorbed by hair than monomethyl- or dimethyl-arsenicals, whereby the trivalent forms are taken up better than the pentavalent forms. Independent of which methylated arsenical was used for the incubation, the pentavalent form was always the dominant form after extraction. Hair and nail samples from humans suffering from chronic arsenic intoxication contained dominantly inorganic arsenic with small and strongly varying amounts of DMA(V) and MA(V) present. DMAS was only found in some nail sample extracts containing unusually high amounts of DMA(V) and is believed to be formed during the extraction process.

Arsenic↗

Linewidth-limited energy transfer in single conjugated polymer molecules.

Using low temperature single molecule spectroscopy on rigid-rod conjugated polymers we are able to identify homogeneously broadened, strongly polarized emission from individual chromophore units on a single chain. Gated fluorescence spectroscopy allows real time imaging of intramolecular energy transfer as the chain behaves as a series of weakly interacting chromophores. Energy transfer is controlled by the chromophoric spectral linewidth, which depends on temperature. Linewidths exceeding intramolecular disorder lead to incoherent chromophore coupling and collective fluorescence phenomena.

Journal Article↗

Fluorescence quenching of dye molecules near gold nanoparticles: radiative and nonradiative effects.

The radiative and nonradiative decay rates of lissamine dye molecules, chemically attached to differently sized gold nanoparticles, are investigated by means of time-resolved fluorescence experiments. A pronounced fluorescence quenching is observed already for the smallest nanoparticles of 1 nm radius. The quenching is caused not only by an increased nonradiative rate but, equally important, by a drastic decrease in the dye's radiative rate. Assuming resonant energy transfer to be responsible for the nonradiative decay channel, we compare our experimental findings with theoretical results derived from the Gersten-Nitzan model.

Biophysical Phenomena↗

Precursor states for charge carrier generation in conjugated polymers probed by ultrafast spectroscopy.

Photocurrent experiments using two femtosecond laser pulses are performed on a photodiode using a ladder-type conjugated polymer as the active layer. With a photon energy of 3.1 eV the first pulse excites singlet excitons. A time-delayed second pulse with a photon energy of 2.49 eV leads to a decrease of the photocurrent by exciton depletion due to stimulated emission. S1 excitons being dissociated during their entire lifetime are identified as the only relevant channel for charge carrier generation. Intrachain polaron pairs are also formed on an ultrafast time scale with a yield of approximately 10%. They can be efficiently dissociated by reexcitation with photons of an energy of 1.9 eV.

Journal Article↗

Drastic reduction of plasmon damping in gold nanorods.

The dephasing of particle plasmons is investigated using light-scattering spectroscopy on individual gold nanoparticles. We find a drastic reduction of the plasmon dephasing rate in nanorods as compared to small nanospheres due to a suppression of interband damping. The rods studied here also show very little radiation damping, due to their small volumes. These findings imply large local-field enhancement factors and relatively high light-scattering efficiencies, making metal nanorods extremely interesting for optical applications. Comparison with theory shows that pure dephasing and interface damping give negligible contributions to the total plasmon dephasing rate.

Journal Article↗

Species-specific isotope-ratio measurements of volatile tin and antimony compounds using capillary GC-ICP-time-of-flight MS.

The analytical performance of an axial inductively-coupled-plasma time-of-flight mass spectrometer (ICP-TOFMS) as a detector for fast transient chromatographic signals resulting from the coupling to capillary gas chromatography (CGC) was investigated. A cryotrapping GC-ICP-TOFMS method for the determination of volatile metal(loid) compounds (VOMs) in gases was used and the suitability of the TOF mass analyzer for multielemental speciation analysis and multi-isotope ratio determinations was studied in terms of accuracy and precision. Isotope ratios 118Sn/120Sn and 121Sb/123Sb have been determined in in-house gas standard atmospheres in Tedlar bags at two different levels (100 pg and 1 ng) for different elemental species (SnH4, MeSnH3, Me2SnH2, Me3SnH, BuSnH3, SbH3, and MeSbH2). A limitation arising from counting statistics in both detection modes could be shown. A solution containing rhodium (10 ng mL(-1)) and cadmium (40 ng mL(-1)) was introduced simultaneously to the GC outlet. Rhodium acts as a continuous internal standard and Cd is used for mass-bias correction (by measuring the 111Cd/113Cd ratio). The detection system in both pulse counting and analog mode was examined. The best attainable precision was established for Me2SnH2 (analog mode, 12 replicates, 1 ng, RSD 0.34%, accuracy 0.31%) whereas most other species ranged between 0.4 and 0.5% RSD if higher concentrations were used. The limitations of the pulse counting system are clearly seen, with peak heights of more than 2000 counts reaching saturation (for an integration time of 100 ms), which reduces the accuracy of isotope ratio determinations. A dozen VOM could be detected in an aged landfill gas sample; several unidentified Sn compounds were present. Although their isotope ratios are within the confidence value of the standards, it is not yet clear if the acquired precision is good enough to identify isotopic fractionation of metal(loid)s through biovolatilization processes. With the precision achieved, the combination of cryotrapping GC and ICP-TOFMS is a powerful tool for monitoring volatile multi-element species in multi-tracer experiments and isotope dilution methodology.

Antimony↗

Electric field directed layer-by-layer assembly of highly fluorescent CdTe nanoparticles.

An electric field directed layer-by-layer assembly technique has been developed by combining electrophoretic deposition and the layer-by-layer self-assembly method. This technique is employed to realize spatially selective deposition of CdTe nanoparticles on electrodes of indium-tin oxide (ITO). The fluorescence measurements prove that the selectivity of the film deposition increases against applied voltage and reaches 99% when the voltage is 1.4 V. Upon further increase of the voltage, the selectivity slightly decreases. This decrease occurs because high voltage leads to a degradation of CdTe particles and thus reduces fluorescence intensity of the resultant CdTe film. However, fluorescence investigation indicates that a spacer layer of polyelectrolyte complex between the ITO electrode and the CdTe film is useful to protect the CdTe from being destroyed under high voltages.

Ammonium Chloride↗

Sampling of trace volatile metal(loid) compounds in ambient air using polymer bags: a convenient method.

The sampling of volatile metal(loid) compounds (VOMs) such as hydrides, methylated, and permethylated species of arsenic, antimony, and tin is described using Tedlar bags. Advantages as well as limitations and constraints are discussed and compared to other widely used sampling techniques within this area, namely, stainless steel canisters, cryotrapping, and solid adsorbent cartridges. To prove the suitability of Tedlar bags for the sampling of volatile metal(loid) compounds, series of stability tests have been run using both laboratory synthetic and real samples analyzed periodically after increasing periods of storage. The samples have been stored in the dark at 20 degrees C and at 50 degrees C. Various volatile arsenic species (AsH3, MeAsH2, Me2AsH, Me3As), tin species (SnH4, MeSnH3, Me2SnH2, Me3SnH, Me4Sn, BuSnH3), and antimony species (SbH3, MeSbH2, Me2SbH, Me3Sb) have been generated using hydride generation methodology and mixed with moisturized air. Three static gaseous atmospheres with concentrations of 0.3-18 ng/L for the various compounds have been generated in Tedlar bags, and the stability of the VOMs has been monitored over a period of 5 weeks. Sewage sludge digester gas samples have been stored only at 20 degrees C for a period of 48 h. Cryotrapping GC/ICPMS has been used for the determination of the VOMs with a relative standard deviation of 5% for 100 pg. After 8 h, the recovery rate of all the compounds in the air atmospheres was better than 95% at 20 and 50 degrees C, whereas the recovery after 24 h was found to be between 81 and 99% for all VOMs at 20 and 50 degrees C except for Me3Sb and Me3As. These species show a loss between 48 and 73% at both temperatures. After 5 weeks at 20 degrees C, a loss of only 25-50% for arsine and stibine and the above-mentioned tin compounds was determined. Only Me3Sb, Me3Bi, and Me2Te were present in the digester gas sample. After 24 h, losses of 44, 10, and 12%, respectively, could be determined. Given these results, Tedlar bags could even be used, with some limitations, for long-term sampling of air containing traces of VOMs. The loss is more pronounced at higher temperatures.

Air↗

Observation of hot-electron pressure in the vibration dynamics of metal nanoparticles

We investigate the vibration dynamics of ellipsoidal silver nanoparticles, using time-resolved optical pump-probe spectroscopy. When excited with femtosecond laser pulses, the particles execute anisotropic shape oscillations. We show that these vibrations are triggered by the thermal expansion of the optically heated particles. The time dependence of the vibrations indicates that this expansion is caused by two mechanisms: The lattice anharmonicity and the extremely large pressure of the hot conduction electrons.

Journal Article↗

Arsenic metabolism in seaweed-eating sheep from Northern Scotland.

Cation exchange and anion exchange liquid chromatography were coupled to an ICP-MS and optimised for the separation of 13 different arsenic species in body fluids (arsenite, arsenate, dimethylarsinic acid (DMAA), monomethylarsonic acid (MMAA), trimethylarsine oxide (TMAO), tetramethylarsonium ion (TMA), arsenobetaine (AsB), arsenocholine (AsC), dimethylarsinoyl ethanol (DMAE) and four common dimethylarsinoylribosides (arsenosugars). The arsenic species were determined in seaweed extracts and in the urine and blood serum of seaweed-eating sheep from Northern Scotland. The sheep eat 2-4 kg of seaweed daily which is washed ashore on the most northern Island of Orkney. The urine, blood and wool of 20 North Ronaldsay sheep and kidney, liver and muscle from 11 sheep were sampled and analysed for their arsenic species. In addition five Dorset Finn sheep, which lived entirely on grass, were used as a control group. The sheep have a body burden of approximately 45-90 mg arsenic daily. Since the metabolism of arsenic species varies with the arsenite and arsenate being the most toxic, and organoarsenic compounds such as arsenobetaine the least toxic compounds, the determination of the arsenic species in the diet and their body fluids are important. The major arsenic species in their diet are arsenoribosides. The major metabolite excreted into urine and blood is DMAA (95 +/- 4.1%) with minor amounts of MMAA, riboside X, TMA and an unidentified species. The occurrence of MMAA is assumed to be a precursor of the exposure to inorganic arsenic, since demethylation of dimethylated or trimethylated organoarsenic compounds is not known (max. MMAA concentration 259 microg/L). The concentrations in the urine (3179 +/- 2667 microg/L) and blood (44 +/- 19 microg/kg) are at least two orders of magnitude higher than the level of arsenic in the urine of the control sheep or literature levels of blood for the unexposed sheep. The tissue samples (liver: 292 +/- 99 microg/kg, kidney: 565 +/- 193 microg/kg, muscle: 680 +/- 224 microg/kg) and wool samples (10470 +/- 5690 microg/kg) show elevated levels which are also 100 times higher than the levels for the unexposed sheep.

Animals↗

Mutations in RAB27A cause Griscelli syndrome associated with haemophagocytic syndrome.

Griscelli syndrome (GS, MIM 214450), a rare, autosomal recessive disorder, results in pigmentary dilution of the skin and the hair, the presence of large clumps of pigment in hair shafts and an accumulation of melanosomes in melanocytes. Most patients also develop an uncontrolled T-lymphocyte and macrophage activation syndrome (known as haemophagocytic syndrome, HS), leading to death in the absence of bone-marrow transplantation. In contrast, early in life some GS patients show a severe neurological impairment without apparent immune abnormalities. We previously mapped the GS locus to chromosome 15q21 and found a mutation in a gene (MYO5A) encoding a molecular motor in two patients. Further linkage analysis suggested a second gene associated with GS was in the same chromosomal region. Homozygosity mapping in additional families narrowed the candidate region to a 3.1-cM interval between D15S1003 and D15S962. We detected mutations in RAB27A, which lies within this interval, in 16 patients with GS. Unlike MYO5A, the GTP-binding protein RAB27A appears to be involved in the control of the immune system, as all patients with RAB27A mutations, but none with the MYO5A mutation, developed HS. In addition, RAB27A-deficient T cells exhibited reduced cytotoxicity and cytolytic granule exocytosis, whereas MYO5A-defective T cells did not. RAB27A appears to be a key effector of cytotoxic granule exocytosis, a pathway essential for immune homeostasis.

B-Lymphocytes↗

Arsenic in the Meager Creek hot springs environment, British Columbia, Canada.

Levels of arsenic in water from Meager Creek hot springs, British Columbia, Canada, were found to be naturally elevated. Biota including microbial mats, green algae, sedge, cedar, fleabane, monkey flower, moss, mushrooms and lichens, that were expected to be impacted by the water, were analyzed for total levels of arsenic and for arsenic species. The major arsenic species extracted from all samples were arsenate and arsenite, which are toxic forms of arsenic. Additionally, small amounts of arsenosugars X and XI were detected in microbial mats and green algae, implying that cyanobacteria/bacteria, and possibly green algae are capable of synthesizing arsenosugars from arsenate. Low to trace amounts of arsenosugars X and XI were detected in lichens and the fungus Tarzetta cupularis. A large fraction (on average, greater than 50%) of arsenic was not extracted by using methanol/water (1:1) and the chemical and toxicological significance of this arsenic remains unknown.

Arsenic↗