PubMed Health⌕ Search

Biomedical subjects

J J Torres-Labandeira

Publications and source records attributed to J J Torres-Labandeira.

9 recordsLinked to original sources

Estradiol sustained release from high affinity cyclodextrin hydrogels.

Hydrogels for loading estradiol and controlling its release were prepared cross-linking various cyclodextrins with ethyleneglycol diglycidylether. To select the more adequate cyclodextrins, estradiol solubility diagrams in water with beta-cyclodextrin (betaCD), methyl-beta-cyclodextrin (MbetaCD), hydroxypropyl-beta-cyclodextrin (HPbetaCD), and sulfobutyl-beta-cyclodextrin (SBbetaCD) were made in absence and presence of hydroxypropyl methylcellulose (HPMC) applying or not autoclaving. Although all cyclodextrins showed enough complexation capability, the low solubility of betaCD and the high anionic character of SBbetaCD hindered the cross-linking process, and these cyclodextrins were discarded for preparing hydrogels. Hydrogels prepared with MbetaCD (20%, 25%) or HPbetaCD (20%, 25%, and 30%), with or without HPMC 0.25%, absorbed 4-10 times their weight in water and loaded up to 24 mg estradiol per gram, which is 500 times greater than the amount of drug that can be dissolved in their aqueous phase. Positive linear correlation was found between the stability constant and the network/water partition coefficients of drug. The hydrogels sustained the release up to one week; the affinity of estradiol for the cyclodextrin units controlling the process, as shown by the negative correlation with the release rate constants. These results highlight the potential of cyclodextrin complexation for the development of hydrogels useful in loading hydrophobic drugs and controlling their release.

2-Hydroxypropyl-beta-cyclodextrin↗

Utility of nuclear magnetic resonance spectroscopy to characterize the structure of dexamethasone sodium phosphate inclusion complexes with cyclodextrins in solution and to analyze potential competitive effects.

The interaction between dexamethasone sodium phosphate (DSP) and four cyclodextrin (CyD) derivatives [2,6-di-O-beta-cyclodextrin (DIMEB), gamma-cyclodextrin (gamma-CyD), and hydroxypropyl-beta-cyclodextrin with either 2.7 or 4.6 degrees of substitution (HPbetaCyD 2.7 and HPbetaCyD 4.6, respectively)] was investigated by proton nuclear magnetic resonance spectroscopy (1H NMR). The data suggested the formation of inclusion complexes in solution in which B and C rings of the molecule are located inside the cavity. Nevertheless, the structure, in terms of depth within CyD, depends on the derivative considered. Molecular mechanics calculations of DSP complexes with DIMEB and gamma-CyD support the NMR results. The potential displacement of DSP from the CyD cavity by usual ophthalmic drugs (e.g., polymyxin B, trimethoprim, and benzalkonium chloride) was determined by NMR. The technique has been found useful to analyze this problem in pharmaceutical preparations.

Anti-Bacterial Agents↗

Effect of cyclodextrins on the solubility and antimycotic activity of sertaconazole: experimental and computational studies.

This study investigated the effects of the complexation of sertaconazole nitrate with different cyclodextrin (CD) derivatives (alpha-CD, beta-CD, gamma-CD, hydroxypropyl-beta-CD, and hydroxypropyl-gamma-CD) on the aqueous solubility and antimycotic activity of the drug. Phase solubility studies indicated that the solubility of sertaconazole in enzyme-free simulated gastric- and enzyme-free simulated enteric fluids was significantly increased in the presence of cyclodextrins. The observed order of solubility increasing effect was: gamma-CD > HPgamma-CD > HPbeta-CD > beta-CD > alpha-CD. Solid-state sertaconazole-cyclodextrin complexes were prepared by freeze drying, and characterized by X-ray powder difractometry, differential scanning calorimetry (DSC), and infrared spectroscopy (FTIR). Freeze-dried complexes showed markedly higher solubility than both physical mixtures and sertaconazole alone. The antimycotic activities of sertaconazole-cyclodextrin complexes in solution were evaluated by inhibition zone assays with Candida albicans. The activity ranking agrees with the solubility ranking observed for these complexes, with the gamma-CD-sertaconazole complex showing the strongest antimycotic activity. Finally, molecular modeling studies were carried out using the MM2 force field method, for complexes in vacuum and in water. This enable indentification of the preferred orientation of sertaconazole in the gamma-CD cavity and of the main structural features responsible for the enhancement of its solubility and antimycotic activity.

Antifungal Agents↗

Improvement of water solubility of sulfamethizole through its complexation with beta- and hydroxypropyl-beta-cyclodextrin. Characterization of the interaction in solution and in solid state.

The aim of this study was to increase the solubility of sulfamethizole in water by complexing it with beta-cyclodextrin (BCD) and hydroxypropyl-beta-cyclodextrin (HPBCD). The interaction of sulfamethizole with the cyclodextrins was evaluated by the solubility, 1H NMR spectrometry and molecular modelling. The stability constants calculated from the phase solubility method increase in order HPBCD<BCD. From the NMR studies could be concluded that the sulfamethizole:cyclodextrin mole ratio was 1:1 (mol/mol) in the BCD complex and 2:3 (mol/mol) in the HPBCD complex. In both cases the sulfamethizole moiety included in the cyclodextrin was the thiadiazole group. MM2 calculations, either in vacuum or in the presence of a solvent, support this structure. Solid inclusion complexes of sulfamethizole with BCD and HPBCD were obtained by freeze drying 1:1 (mol/mol) solutions in aqueous ammonium hydroxide. Host-guest interactions were studied in the solid state by powder X-ray diffractometry and differential scanning calorimetry. The dissolution rates of sulfamethizole increased by the complexation with BCD or HPBCD.

2-Hydroxypropyl-beta-cyclodextrin↗

Molecular modeling (MM2 and PM3) and experimental (NMR and thermal analysis) studies on the inclusion complex of salbutamol and beta-cyclodextrin.

The inclusion complex of salbutamol and beta-cyclodextrin (beta-CD) is studied by computational (MM2 and PM3) and experimental techniques. Molecular modeling calculations predict two different orientations of salbutamol in the beta-CD cavity in vacuo and in aqueous solution. In vacuo calculations show that the introduction of the aromatic ring of salbutamol is preferred to the introduction of the tert-butyl group into the beta-CD cavity. However, in aqueous solution both computational methods predict the introduction of the alkyl chain instead of the aromatic ring in the beta-CD cavity contrary to experimental results published previously. These quantitative predictions were experimentally confirmed here by studying the inclusion complex in solution by NMR. A 1:1 stoichiometry was found by (1)H NMR studies for this complex. A 2D ROESY (rotating-frame Overhauser enhancement spectroscopy) experiment shows that there are no cross-peaks between the aromatic protons of salbutamol and any of the protons of beta-CD. Cross-peaks for the protons of the tert-butyl group and protons inside the cavity of beta-CD demonstrate the full involvement of this group in the complexation process and confirm the orientation of the complex predicted by molecular modeling. The solid-state complex was prepared and its stoichiometry (beta-CD.C(13)H(21)NO(3).8H(2)O) and dissociation process studied by thermogravimetric analysis.

Albuterol↗

Complexation of the interferon inducer, bropirimine, with hydroxypropyl-beta-cyclodextrin.

Bropirimine (ABPP) is an orally active immunomodulator that increases endogenous alpha-interferon and other cytokines used clinically against carcinoma in situ of the bladder. The oral absorption of ABPP is poor because its low solubility in water. The purpose of this study is to develop a technological procedure useful to increase the water solubility of ABPP. To this end, the interaction of ABPP with several cyclodextrin derivatives-alpha-, beta-, gamma- and hydroxypropyl-beta-cyclodextrin with a degree of substitution 2.7 (HPbetaCD) was studied and the effect of the complexation process on the water solubility of the drug was evaluated. The best results were obtained with the hydroxypropyl derivative, HPbetaCD, that interacts in a 1:1 drug:cyclodextrin molar ratio. The inclusion complex ABPP-HPbetaCD was characterized in solution by nuclear magnetic resonance (1H-NMR). The solid inclusion complex was obtained by freeze-drying and characterized by differential scanning calorimetry (DSC), X-ray diffractometry and mass spectrometry. The dissolution rate of ABPP from the HPbetaCD solid inclusion complex was increased compared to the powdered drug but not differences were found between the complex and a physical mixture with a similar molar ratio. The increase of the dissolution rate of the drug can be attributed to the breakdown in solution of the drug dimers in the presence of the cyclodextrin and to the complex formation.

2-Hydroxypropyl-beta-cyclodextrin↗

Oversaturated solutions of drug in hydroxypropylcyclodextrins: parenteral preparation of pancratistatin.

The effect of 15 cyclodextrin derivatives (polar-electroneutral, cationic, anionic, and lipophilic) and of three 2-hydroxypropyldigitonins on the solubility of pancratistatin, an anticancer drug, was evaluated. The direct solubilizations into aqueous solutions were invariably low (0.1-1.2 mg/mL compared with 50 micrograms/mL in water). Complexes of pancratistatin with hydroxypropyl-beta-cyclodextrin were more stable (Kapp 153 M-1) than those with hydroxypropyl-gamma-cyclodextrin (Kapp 108 M-1). Acceptable preparations were made by dissolution of pancratistatin in a large excess (50x) of hydroxypropylcyclodextrin by ammonia and then freeze drying to ammonia-free preparations. In these preparations, both the inclusion and interdispersion phenomena were operative, and the preparations dissolved rapidly forming clear solutions of pancratistatin of concentrations up to 9 mg/mL. These solutions were oversaturated and while those based on hydroxypropyl-beta-cyclodextrin precipitated within 1 h; those based on hydroxypropyl-gamma-cyclodextrin were stable for at least 4 h when kept in a plastic container (i.e., time sufficient for potential use in parenteral preparations).

Amaryllidaceae Alkaloids↗

Combination of 2D-, 3D-connectivity and quantum chemical descriptors in QSPR. Complexation of alpha- and beta-cyclodextrin with benzene derivatives.

Quantitative models are found to describe the complexation of alpha- and beta-cyclodextrin with mono- and 1,4-disubstituted benzene derivatives by using combinations of 2D-, 3D-connectivity and quantum chemical molecular descriptors. The association constants (K(a)) for the inclusion complexation of cyclodextrins and benzene derivatives are calculated by the models found with a high degree of precision. These models also permit the interpretation of the driving forces of such complexation processes. In the case of the complexation of alpha-cyclodextrin with benzene derivatives these driving forces are mainly the electronic repulsion between frontier orbitals of the host and guest molecules. However, the complexation of beta-cyclodextrin with benzene derivatives is controlled by topological and topographic parameters indicating the relevance of the van der Waals and hydrophobic interactions. We also carried out molecular modeling studies showing that for alpha-cyclodextrin complexes the benzene ring is outside the cavity of the cyclodextrin, while in beta-cyclodextrin they penetrate deeply into the apolar and hydrophobic cavity of the host, which explain the differences in the driving forces for both complexation processes.

Journal Article↗

Drug solubilization and delivery from cyclodextrin-Pluronic aggregates.

Colloidal systems based on Pluronic F127 (PF127) and hydroxypropyl-beta-cyclodextrin (HPbetaCD) have been characterized with a view to their potential use as delivery systems of hydrophobic drugs. Complexation of PF127 and HPbetaCD was evaluated by surface tension measurements, 1H-NMR spectroscopy and transmission electron microscopy. The critical micellar concentration, CMC, at 25 degrees C of PF127 (0.39 mM in pH 5.8 and 7.4 phosphate buffers, and 0.59 mM in pH 4.5 acetic/acetate and lactic/lactate buffers) was shifted to higher values by the addition of 38.17 mM HPbetaCD (CMC(app) = 1.18 mM). This is related to the threading of HPbetaCD onto the PF127 chains, as confirmed by 1H NMR experiments. HPbetaCD at this concentration notably raised the sol-gel transition temperature; the minimum PF127 concentration required for providing gelling systems in physiological environments being 13.4 mM. Both HPbetaCD and PF127 by themselves are able to notably increase the solubility of sertaconazole (SN). At HPbetaCD concentrations below 80 mM, an additive effect of both components on SN solubility was observed. At greater HPbetaCD concentrations, a non-additive increase occurred, which is related to the complexation of some PF127 unimers with HPbetaCD molecules, decreasing the total number of micelles and HPbetaCD cavities available for interacting with SN. The 13.4 mM PF127/38.17 mM HPbetaCD system, able to increase up to 100 times the SN solubility in pH5.8 phosphate buffer, showed temperature-dependent drug diffusion coefficients, able to control the release for one week at 37 degrees C.

Antifungal Agents↗