PubMed Health⌕ Search

Biomedical subjects

J K Hörber

Publications and source records attributed to J K Hörber.

At least 19 recordsLinked to original sources
PubMed2001

Lateral mechanical coupling of stereocilia in cochlear hair bundles.

For understanding the gating process of transduction channels in the inner ear it is essential to characterize and examine the functional properties of the ultrastructure of stereociliary bundles. There is strong evidence that transduction channels in hair cells are gated by directly pulling at the so-called tip links. In addition to these tip links a second class of filamentous structures was identified in the scanning and transmission electron microscope: the side-to-side links. These links laterally connect stereocilia of the same row of a hair bundle. This study concentrates on mechanical coupling of stereocilia of the tallest row connected by side-to-side links. Atomic Force microscopy (AFM) was used to investigate hair bundles of outer hair cells (OHCs) from postnatal rats (day 4). Although hair bundles of postnatal rats are still immature at day 4 and interconnecting cross-links do not show preferential direction yet, hair bundles of investigated OHCs already showed the characteristic V-shape of mature hair cells. In a first experiment, the stiffness of stereocilia was investigated scanning individual stereocilia with an AFM tip. The spring constant for the excitatory direction was 2.5 +/- 0.6 x 10(-3) N/m whereas a higher spring constant (3.1 +/- 1.5 x 10(-3) N/m) was observed in the inhibitory direction. In a second set of experiments, the force transmission between stereocilia of the tallest row was measured using AFM in combination with a thin glass fiber. This fiber locally displaced a stereocilium while the force laterally transmitted to the neighboring untouched taller stereocilia was measured by AFM. The results show a weak force interaction between tallest stereocilia of postnatal rats. The force exerted to an individual stereocilium declines to 36% at the nearest adjacent stereocilium of the same row not touched with the fiber. It is suggested that the amount of force transmitted from a taller stereocilium to an adjacent one of the same row depends on the orientation of links. Maximum force transmission is expected to appear along the axis of interconnecting side links. In our studies it is suggested that transmitted forces are small because connecting side links are oriented very close to an angle of 90 degrees with respect of the scan direction (excitatory-inhibitory direction).

Animals↗
PubMed2001

Semi-automatized processing of AFM force-spectroscopy data.

Atomic force microscopy operated in the force-spectroscopy mode is now a widespread technique, often used to investigate ligand-receptor interactions with the goal of measuring forces at the individual molecule level. However, in an experiment, the simultaneous interaction of several ligand/receptor pairs cannot be excluded. This may produce complicated force curves, although unambiguous ruptures are sometimes observed. In the case of the non-specific adhesion of molecules, such as fibrinogen, to a surface, it is usually difficult to identify the real events on the force curves. This can render the application of fixed rules uneasy and in addition can introduce some degree of arbitrariness if the analysis has to be performed by hand. In the present paper a computer algorithm, aimed at speeding up the processing, and at applying selection rules in a reproducible manner, is proposed. It is applied to force recordings performed at various retraction velocities, thus various loading rates. The influence on the evaluation of the rupture forces of the different parameters that can be set by the operator is discussed.

Adsorption↗
PubMed2000

Unbinding process of adsorbed proteins under external stress studied by atomic force microscopy spectroscopy.

We report the study of the dynamics of the unbinding process under a force load f of adsorbed proteins (fibrinogen) on a solid surface (hydrophilic silica) by means of atomic force microscopy spectroscopy. By varying the loading rate r(f), defined by f = r(f) t, t being the time, we find that, as for specific interactions, the mean rupture force increases with r(f). This unbinding process is analyzed in the framework of the widely used Bell model. The typical dissociation rate at zero force entering in the model lies between 0. 02 and 0.6 s(-1). Each measured rupture is characterized by a force f(0), which appears to be quantized in integer multiples of 180-200 pN.

Fibrinogen↗
PubMed2000

States and transitions during forced unfolding of a single spectrin repeat.

Spectrin is a vital and abundant protein of the cytoskeleton. It has an elongated structure that is made by a chain of so-called spectrin repeats. Each repeat contains three antiparallel alpha-helices that form a coiled-coil structure. Spectrin forms an oligomeric structure that is able to cross-link actin filaments. In red cells, the spectrin/actin meshwork underlying cell membrane is thought to be responsible for special elastic properties of the cell. In order to determine mechanical unfolding properties of the spectrin repeat, we have used single molecule force spectroscopy to study the states of unfolding of an engineered polymeric protein consisting of identical spectrin domains. We demonstrate that the unfolding of spectrin domains can occur in a stepwise fashion during stretching. The force-extension patterns exhibit features that are compatible with the existence of at least one intermediate between the folded and the completely unfolded conformation. Only those polypeptides that still contain multiple intact repeats display intermediates, indicating a stabilisation effect. Precise force spectroscopy measurements on single molecules using engineered protein constructs reveal states and transitions during the mechanical unfolding of spectrin. Single molecule force spectroscopy appears to open a new window for the analysis of transition probabilities between different conformational states.

Animals↗
PubMed2000

Sphingolipid-cholesterol rafts diffuse as small entities in the plasma membrane of mammalian cells.

To probe the dynamics and size of lipid rafts in the membrane of living cells, the local diffusion of single membrane proteins was measured. A laser trap was used to confine the motion of a bead bound to a raft protein to a small area (diam < or = 100 nm) and to measure its local diffusion by high resolution single particle tracking. Using protein constructs with identical ectodomains and different membrane regions and vice versa, we demonstrate that this method provides the viscous damping of the membrane domain in the lipid bilayer. When glycosylphosphatidylinositol (GPI) -anchored and transmembrane proteins are raft-associated, their diffusion becomes independent of the type of membrane anchor and is significantly reduced compared with that of nonraft transmembrane proteins. Cholesterol depletion accelerates the diffusion of raft-associated proteins for transmembrane raft proteins to the level of transmembrane nonraft proteins and for GPI-anchored proteins even further. Raft-associated GPI-anchored proteins were never observed to dissociate from the raft within the measurement intervals of up to 10 min. The measurements agree with lipid rafts being cholesterol-stabilized complexes of 26 +/- 13 nm in size diffusing as one entity for minutes.

Alkaline Phosphatase↗
PubMed2000

Mechanical stimulation of individual stereocilia of living cochlear hair cells by atomic force microscopy.

This paper describes the investigation of elastical properties and imaging of living cochlear hair bundles of inner (IHC) and outer hair cells (OHC) on the level of individual stereocilia. A custom-made AFM-setup was used, allowing to scan the mechano-sensitive structures of the inner ear under direct control of an upright differential interference contrast (DIC) microscope with a water-immersion objective. Scanning electron microscopy (SEM) images of the identical hair bundles obtained after AFM investigation demonstrated that forces up to 1.5 nanonewton (nN) did not cause obvious damage of the surface morphology of the stereocilia. These are the first images of hair bundles of living sensory cells of the organ of Corti by AFM. They display the tips of individual stereocilia and the typical V-shape of ciliary bundles. Since line scans clearly show that slope and force interaction depend on the elastical properties of stereocilia, quantitative stiffness measurements and stimulation of single transduction channels are suggested.

Animals↗
PubMed1999

Direct observation of the anchoring process during the adsorption of fibrinogen on a solid surface by force-spectroscopy mode atomic force microscopy.

Atomic force microscopy in a force-spectroscopy mode has been used to investigate the kinetics of the adsorption process of fibrinogen molecules on a silica surface. An original "approach/retraction" cycle of the tip/surface was used for this purpose. Fibrinogen molecules were adsorbed on the atomic force microscopy tip and were brought into contact with the silica surface for different interaction times varying from 5 to 2,000 ms. Multiple consecutive ruptures were observed. The mean number of ruptures nr per cycle increases steadily with the interaction time as well as the mean strength fr which varies from 300 pN for 5 ms to 1,400 pN for 2,000 ms. The minimal interaction time for a fibrinogen molecule to bind strongly to a silica surface during an adsorption process appears to lie between 50 and 200 ms. The histograms of the distances between two consecutive ruptures in one cycle exhibit maxima around 20-25 nm. This length is comparable to the characteristic distance between D and E globules of one fibrinogen molecule and suggests that fibrinogen molecules mainly adsorb through their D and E globules.

Fibrinogen↗
PubMed1999

How dry are dried samples? Water adsorption measured by STM.

When operating scanning probe microscopes, like STM or AFM, under ambient conditions, the presence of water on the sample and the tip always plays an important role. The water not only influences the structure of the sample itself, but also the imaging process; in the case of the STM using a wet etched w-tip, by interfering with the electron transfer process, and in the case of the AFM, due to the capillary forces in the micro Newton range that dominate the tip surface interaction forces. In this paper, the distribution and the amount of adsorbed water on different surfaces is investigated with the help of the STM, which can provide information by imaging and by current/distance spectroscopy. Hydrophilic and hydrophobic surfaces like titanium, gold, and graphite were studied at a relative humidity between 10 and 90%. Under very dry conditions with relative humidity below 15%, the presence of water was only detectable by the longer decay length of the measured current with distance compared to samples prepared in UHV completely free of water. At less dry conditions on gold surfaces, water was found as droplets. With increasing humidity, the quantity and the size of these droplets increased until the whole surface became covered with water. Above 55% humidity, the thickness of the water film increased with increasing humidity up to several 10 nm. On titanium and graphite, water was always present in the form of closed layers growing in thickness with increasing humidity.

Adsorption↗
PubMed1999

Three-dimensional high-resolution particle tracking for optical tweezers by forward scattered light.

A quadrant photodiode placed in the back-focal plane of the microscope of a laser trap provides a high-resolution position sensor. We show that in addition to the lateral displacement of a trapped sphere, its axial position can be measured by the ratio of the intensity of scattered laser light to the total amount of the light reaching the detector. The addition of the axial information offers true three-dimensional position detection in solution, creating, together with a position control, a photonic force microscope with nanometer spatial and microsecond temporal resolution. The measured position signals are explained as interference of the unscattered trapping laser beam with the laser light scattered by the trapped bead. Our model explains experimental data for trapped particles in the Rayleigh regime (radius a <0.2lambda) for displacements up to the focal dimensions. The cross-talk between the signals in the three directions is explained and it is shown that this cross-talk can be neglected for lateral displacements smaller than 75 nm and axial displacements below 150 nm. The advantages of three-dimensional single-particle tracking over conventional video-tracking are shown through the example of the diffusion of the GPI-anchored membrane protein Thy1.1 on a neurite.

Animals↗
PubMed1998

Voltage-dependent membrane displacements measured by atomic force microscopy.

Cells use polar molecules in the membrane to sense changes in the transmembrane potential. The opening of voltage-gated ion channels and membrane bending due to the inverse flexoelectric effect are two examples of such electromechanical coupling. We have looked for membrane motions in an electric field using atomic (or scanning) force microscopy (AFM) with the intent of studying voltage-dependent conformational changes of ion channels. Voltage-clamped HEK293 cells were either untransfected controls or transfected with Shaker K+ channels. Using a +/- 10-mV peak-peak AC carrier stimulus, untransfected cells moved 0.5-15 nm normal to the plane of the membrane. These movements tracked the voltage at frequencies >1 kHz with a phase lead of 60-120 degrees, as expected of a displacement current. The movement was outward with depolarization, but the holding potential only weakly influenced the amplitude of the movement. In contrast, cells transfected with a noninactivating mutant of Shaker K+channels showed similar movements, but these were sensitive to the holding potential; decreasing with depolarization between -80 and 0 mV. Searching for artifactual origins of these movements, we used open or sealed pipettes and AFM cantilever placements just above the cells. These results were negative, suggesting that the observed movements were produced by the cell membrane rather than by movement of the patch pipette, or by acoustic or electrical interactions of the membrane with the AFM tip. In control cells, the electrical motor may arise from the flexoelectric effect, where changes in potential induce changes in curvature. In transfected cells, it appears that channel-specific movements also occurred. These experiments demonstrate that the AFM may be able to exploit voltage-dependent movements as a source of contrast for imaging membrane components. The electrically induced motility will cause twitching during action potentials, and may have physiological consequences.

Artifacts↗
PubMed1997

Understanding intercellular interactions and cell adhesion: lessons from studies on protein-metal interactions.

To understand cell-cell interactions and the interactions of cells to non-biological materials, studies on binding forces between cellular proteins and between proteins and non-biological material such as metal surfaces are essential. The adsorption of proteins to solid-water interfaces is a multifactorial and a multistep process. First steps are determined by long-range interactions where surface properties such as hydrophobicity, distribution of charged groups, ion concentrations and pH play important roles. In later steps structural rearrangements in the protein molecule and dehydration effects become more important making the adsorption process often irreversible. In the following we demonstrate that protein A and tubulin have a specific type of interaction to metal surfaces probably as an intermediate step in the adsorption process. The proteins were attached to the tip of a microfabricated cantilever in such a way that only one molecule interacts with the surface. By recording force-distance curves with an atomic force microscope the adhesion forces of single molecules binding to gold, titanium and indium-tinoxid surfaces were measured.

Animals↗
PubMed1997

Photonic force microscope based on optical tweezers and two-photon excitation for biological applications.

A new scanning probe microscope, the photonic force microscope (PFM), based on optical tweezers and two-photon absorption processes for biological applications is described. Optical tweezers are used to trap a fluorescent latex bead with a diameter of 200 nm in an aqueous solution in all three dimensions. The fluorescent dye is chosen to fulfill the two-photon absorption criterion for the 1064-nm line of a Nd:YVO4 laser. The intensity of the fluorescence emission is utilized as a very sensitive position sensor along the optical axis. Two-dimensional images are formed by laterally scanning the trapped latex bead across biological samples while recording the two-photon-induced fluorescences intensity. A scanning probe image of the outer surface of a small neurite from a cultured rat hippocampal neuron is shown, which is hardly visible under differential interference contrast microscopy. The lateral resolution is given by the bead diameter; the axial resolution is 40 nm. Under the experimental conditions the maximal imaging force applied by the probe is below 5 pN.

Animals↗
PubMed1997

AFM review study on pox viruses and living cells.

Single living cells were studied in growth medium by atomic force microscopy at a high--down to one image frame per second--imaging rate over time periods of many hours, stably producing hundreds of consecutive scans with a lateral resolution of approximately 30-40 nm. The cell was held by a micropipette mounted onto the scanner-piezo as shown in Häberle, W., J. K. H. Hörber, and G. Binnig. 1991. Force microscopy on living cells. J. Vac. Sci. Technol. B9:1210-0000. To initiate specific processes on the cell surface the cells had been infected with pox viruses as reported earlier and, most likely, the liberation of a progeny virion by the still-living cell was observed, hence confirming and supporting earlier results (Häberle, W., J. K. H. Hörber, F. Ohnesorge, D. P. E. Smith, and G. Binnig. 1992. In situ investigations of single living cells infected by viruses. Ultramicroscopy. 42-44:1161-0000; Hörber, J. K. H., W. Häberle, F. Ohnesorge, G. Binnig, H. G. Liebich, C. P. Czerny, H. Mahnel, and A. Mayr. 1992. Investigation of living cells in the nanometer regime with the atomic force microscope. Scanning Microscopy. 6:919-930). Furthermore, the pox viruses used were characterized separately by AFM in an aqueous environment down to the molecular level. Quasi-ordered structural details were resolved on a scale of a few nm where, however, image distortions and artifacts due to multiple tip effects are probably involved--just as in very high resolution (<15-20 nm) images on the cells. Although in a very preliminary manner, initial studies on the mechanical resonance properties of a single living (noninfected) cell, held by the micropipette, have been performed. In particular, frequency response spectra were recorded that indicate elastic properties and enough stiffness of these cells to make the demonstrated rapid scanning of the imaging tip plausible. Measurements of this kind, especially if they can be proven to be cell-type specific, may perhaps have a large potential for biomedical applications. Images of these living cells were also recorded in the widely known (e.g., Radmacher, M., R. W. Tillmann, and H. E. Gaub. 1993. Imaging viscoelasticity by force modulation with the atomic force microscope. Biophys. J. 64:735-742) force modulation mode, yet at one low modulation frequency of approximately 2 kHz. (Note: After the cells were attached to the pipette by suction, they first deformed significantly and then reassumed their original spherical shape, which they also acquire when freely suspended in solution, to a great extent with the exception of the portion adjusting to the pipette edge geometry after approximately 0.5-1 h, which occurred in almost the same manner with uninfected cells, and those that had been infected several hours earlier. This seems to be a process which is at least actively supported by the cellular cytoskeleton, rather than a mere osmotic pressure effect induced by electrolyte transport through the membrane. Furthermore, several hours postinfection (p.i.) infected cells developed many optically visible refraction effects, which appeared as small dark spots in the light microscope, that we believed to be the regions in the cell plasma where viruses are assembled; this is known from the literature on electron microscopy on pox-infected cells and referred to there as "virus factories" (e.g., Moss, B. 1986. Replication of pox viruses. In Fundamental Virology, B. N. Fields and D. M. Knape, editors. Raven Press, New York. 637-655). Therefore, we assume that the cells stay alive during imaging, in our experience for approximately 30-45 h p.i.).

Animals↗
PubMed1997

TEM moiré patterns explain STM images of bacteriophage T5 tails.

A subtle combination of constant current and constant height modes in scanning tunnelling microscopy allowed the imaging of a non-flat uncoated biological specimen, namely the tail of the bacteriophage T5. In parallel, a reference three-dimensional structure of the T5 tail was calculated from cryo-transmission electron microscopy images, based on its helical symmetry. This three dimensional reconstruction was compared with scanning tunnelling microscopy data. The images of the tail obtained by transmission electron microscopy, as well as projections of the reconstructed model, show similar moiré patterns. Here we show that scanning tunnelling microscopy performed in an aqueous environment provides direct images which are remarkably similar to the projection of the three dimensional model obtained by transmission electron microscopy. We deduce that our scanning tunnelling microscopy images are the result of a transmission of electrons through the gap between the scanning tip and the conductive support across the biological specimen.

Image Processing, Computer-Assisted↗
PubMed1995

A look at membrane patches with a scanning force microscope.

We combined scanning force microscopy with patch-clamp techniques in the same experimental setup and obtained images of excised membrane patches spanning the tip of a glass pipette. These images indicate that cytoskeleton structures are still present in such membrane patches and form a strong connection between the membrane and the glass wall. This gives the membrane patch the appearance of a tent, stabilized by a scaffold of ropes. The lateral resolution of the images depends strongly on the observed structures and can reach values as low as 10 nm on the cytoskeleton elements of a (inside-out) patch. The observations suggest that measurements of membrane elasticity can be made, opening the way for further studies on mechanical properties of cell membranes.

Animals↗
PubMed1994

Approaching microtubule structure with the scanning tunneling microscope (STM).

We demonstrate that the scanning tunneling microscope can be used to obtain information about arrangement of tubulin subunits in the microtubule wall. Long rows of subunits with a periodicity of 3.8 +/- 0.4 nm were clearly visible in the images of microtubules. The separation between the rows of subunits was 4.8 +/- 0.4 nm. Close inspection of two images revealed another periodicity of 7.8 +/- 0.4 nm in the contour levels of the protofilaments. This indicates that alpha and beta tubulin monomers can be resolved. In these areas the monomers were arranged according to a 'B-type' lattice. Scanning tunneling microscope images confirm that the lateral contacts between tubulin monomers in adjacent protofilaments are compatible with a three-start, left-handed helix model. This study demonstrates that scanning tunneling microscopy can give direct information on the structure and organization of macromolecular assemblies and can complement the classical methods of electron microscopy and X-ray scattering.

Animals↗
PubMed1992

In situ investigations of single living cells infected by viruses.

In this paper we report the direct observation of biological processes on living cells. The experiments were done in situ by scanning force microscopy on a scale inaccessible by other techniques under physiological conditions. Living monkey-kidney cultured cells were imaged under normal growth conditions and showed reproducible features on the 10 nm scale. Upon adding a suspension of pox viruses, characteristic changes of the cell membrane were repeatedly observed in different experiments on different cells. Almost immediately, a pronounced softening of the cell surface occurred which lasted only for a few minutes. More than two hours later very significant protrusions appeared to grow out of the cell membrane. These protrusions abruptly disappeared again. These events were only observed after infection and we interpret them as the exocytosis of proteins related to viral reproduction. After almost 20 h, a different type of event occurred which we interpret as the exocytosis of the progeny viruses themselves.

Animals↗