PubMed Health⌕ Search

Biomedical subjects

J Karolin

Publications and source records attributed to J Karolin.

8 recordsLinked to original sources

Chloride-sensitive fluorescent indicators.

Three fluorescent halide-sensitive quinolinium dyes have been produced by the reaction of the 6-methylquinoline heterocyclic nitrogen base with methyl bromide, methyl iodide, and 3-bromo-1-propanol. The quaternary salts, unlike the precursor molecule, are readily water soluble and the fluorescence intensity of these salts is reduced in the presence of aqueous chloride, bromide, and iodide ions, allowing halide solution concentrations to be determined using well-known Stern-Volmer kinetics. One of the dyes, dye 1, has a chloride Stern-Volmer constant of 255 mol(-1) dm(3) which is more than twice that of SPQ [6-methoxy-N-(3-sulfopropyl)quinolinium] used in recent physiological measurements to measure intracellular chloride levels. The dyes have been characterized using steady-state fluorescence spectroscopy and are compared to three similar dyes based on the 6-methoxyquinoline nucleus, reported earlier by the authors, and also to dyes reported by Krapf et al. (Anal. Biochem. 169, 142-150, 1988). The interference of aqueous anions and the potential for using these dyes in biological halide-sensing applications are discussed.

Chlorides↗

Conformational studies of plasminogen activator inhibitor type 1 by fluorescence spectroscopy. Analysis of the reactive centre of inhibitory and substrate forms, and of their respective reactive-centre cleaved forms.

The inhibitors that belong to the serpin family are suicide inhibitors that control the major proteolytic cascades in eucaryotes. Recent data suggest that serpin inhibition involves reactive centre cleavage followed by loop insertion, whereby the covalently linked protease is translocated away from the initial docking site. However under certain circumstances, serpins can also be cleaved like a substrate by target proteases. In this report we have studied the conformation of the reactive centre of plasminogen activator inhibitor type 1 (PAI-1) mutants with inhibitory and substrate properties. The polarized steady-state and time-resolved fluorescence anisotropies were determined for BODIPY(R) probes attached to the P1' and P3 positions of the substrate and active forms of PAI-1. The fluorescence data suggest an extended orientational freedom of the probe in the reactive centre of the substrate form as compared to the active form, revealing that the conformation of the reactive centres differ. The intramolecular distance between the P1' and P3 residues in reactive centre cleaved inhibitory and substrate mutants of PAI-1, were determined by using the donor-donor energy migration (DDEM) method. The distances found were 57+/-4 A and 63+/-3 A, respectively, which is comparable to the distance obtained between the same residues when PAI-1 is in complex with urokinase-type plasminogen activator (uPA). Following reactive centre cleavage, our data suggest that the core of the inhibitory and substrate forms possesses an inherited ability of fully inserting the reactive centre loop into beta-sheet A. In the inhibitory forms of PAI-1 forming serpin-protease complexes, this ability leads to a translocation of the cognate protease from one pole of the inhibitor to the opposite one.

Boron Compounds↗

The use of site-directed fluorophore labeling and donor-donor energy migration to investigate solution structure and dynamics in proteins.

The use of molecular genetics for introducing fluorescent molecules enables the use of donor-donor energy migration to determine intramolecular distances in a variety of proteins. This approach can be applied to examine the overall molecular dimensions of proteins and to investigate structural changes upon interactions with specific target molecules. In this report, the donor-donor energy migration method is demonstrated by experiments with the latent form of plasminogen activator inhibitor type 1. Based on the known x-ray structure of plasminogen activator inhibitor type 1, three positions forming the corners of a triangle were chosen. Double Cys substitution mutants (V106C-H185C, H185C-M266C, and M266C-V106C) and corresponding single substitution mutants (V106C, H185C, and M266C) were created and labeled with a sulfhydryl specific derivative of BODIPY (=the D molecule). The side lengths of this triangle were obtained from analyses of the experimental data. The analyses account for the local anisotropic order and rotational motions of the D molecules, as well as for the influence of a partial DD-labeling. The distances, as determined from x-ray diffraction, between the C(alpha)-atoms of the positions V106C-H185C, H185C-M266C, and M266C-V106C were 60.9, 30.8, and 55.1 A, respectively. These are in good agreement with the distances of 54 +/- 4, 38 +/- 3, and 55 +/- 3 A, as determined between the BODIPY groups attached via linkers to the same residues. Although the positions of the D-molecules and the C(alpha)-atoms physically cannot coincide, there is a reasonable agreement between the methods.

Boron Compounds↗

Donor-donor energy migration for determining intramolecular distances in proteins: I. Application of a model to the latent plasminogen activator inhibitor-1 (PAI-1).

A new fluorescence spectroscopic method is presented for determining intramolecular and intermolecular distances in proteins and protein complexes, respectively. The method circumvents the general problem of achieving specific labeling with two different chromophoric molecules, as needed for the conventional donor-acceptor transfer experiments. For this, mutant forms of proteins that contain one or two unique cysteine residues can be constructed for specific labeling with one or two identical fluorescent probes, so-called donors (d). Fluorescence depolarization experiments on double-labeled Cys mutant monitor both reorientational motions of the d molecules, as well as the rate of intramolecular energy migration. In this report a model that accounts for these contributions to the fluorescence anisotropy is presented and experimentally tested. Mutants of a protease inhibitor, plasminogen activator inhibitor type-1 (PAI-1), containing one or two cysteine residues, were labeled with sulfhydryl specific derivatives of 4,4-difluoro-4-borata-3a-azonia-4a-aza-s-indacence (BODIPY). From the rate of energy migration, the intramolecular distance between the d groups was calculated by using the Forster mechanism and by accounting for the influence of local anisotropic orientation of the d molecules. The calculated intramolecular distances were compared with those obtained from the crystal structure of PAI-1 in its latent form. To test the stability of parameters extracted from experiments, synthetic data were generated and reanalyzed.

Biophysics↗

Biochemical and biophysical studies of reactive center cleaved plasminogen activator inhibitor type 1. The distance between P3 and P1' determined by donor-donor fluorescence energy transfer.

Plasminogen activator inhibitor type 1 (PAI-1) is a fast acting inhibitor of plasminogen activators (PAs). In accordance with other serpins, PAI-1 is thought to undergo a conformational change upon reactive center cleavage. In this study we have developed methods to produce and purify reactive center cleaved wild-type PAI-1 and characterized this molecular form of PAI-1 by biochemical and biophysical methods. Incubation with Sepharose-bound trypsin caused cleavage only at the P1-P1' bond in the reactive center and resulted in 39- and 4-kDa polypeptides, strongly held together by noncovalent interactions. Circular dichroism measurements suggest that the reactive center cleavage triggers larger conformational changes than the conversion from the active to the latent form. Cleaved PAI-1 did not bind to either PAs or vitronectin but retained the heparin-binding capacity. To study the structure of cleaved PAI-1 by polarized fluorescence spectroscopy and to measure intramolecular distances, we used cysteine substitution mutants to which extrinsic fluorescence probes were attached. These studies revealed increasing orientational freedom of probes in the P3 and P1' positions upon cleavage. Distance measurements based on fluorescence energy transfer between probes in positions P3 and P1' indicate that these residues are separated by at least 68 +/- 10 A in cleaved PAI-1.

Amino Acid Sequence↗

Time-resolved polarized fluorescence spectroscopy studies of plasminogen activator inhibitor type 1: conformational changes of the reactive center upon interactions with target proteases, vitronectin and heparin.

Plasminogen activator inhibitor type 1 (PAI-1) is an important physiological inhibitor of the plasminogen activator system. To investigate the structure-functional aspects of this inhibitor, we have taken advantage of the lack of cysteine residues in the PAI-1 molecule and substituted Ser344 (P3) and Met347 (P1'), in the reactive center loop, with cysteines, thereby creating unique attachment sites for extrinsic fluorescent probe. Both cysteine mutants were purified and labeled with a sulfhydryl specific fluorophore, N-(4,4-difluoro-5,7-dimethyl-4-bora-3a,4a-diaza-s-indacen yl-3-propionyl)-N- (iodoacetyl)ethylenediamine (BDYIA). The labeled mutants were found to reveal biochemical characteristics very similar to those of wild type PAI-1. Time-resolved fluorescence spectroscopy was used to examine orientational freedom of BDYIA in the reactive center loop of PAI-1. The orientational freedom of the probe was found to be greater in the latent form than in the active form of PAI-1, suggesting that the reactive center has a more relaxed conformation in the latent form than in the active form. Complex formation with target proteases, tissue type plasminogen activator (tPA) and urokinase type plasminogen activator (uPA), caused decreased orientational freedom of BDYIA in the P3 position, while the orientational freedom of BDYIA in position P1' increased to a level similar to that of BDYIA in reactive center-cleaved PAI-1. In contrast, complex formation with modified anhydro-uPA, which is unable to cleave its substrate, largely restricted the orientational freedom of BDYIA probe in the P1' position.(ABSTRACT TRUNCATED AT 250 WORDS)

Base Sequence↗

Fluorescence studies on plasminogen activator inhibitor 1: reactive centre cysteine mutants remain active after fluorophore attachment.

To investigate structural-functional aspects of plasminogen activator inhibitor 1 (PAI-1) we have taken advantage of the lack of cysteines in the PAI-1 molecule and replaced Ser344 (P3) and Asn329 (P18) with cysteine residues, thereby creating unique attachment sites for extrinsic fluorescent probes. After expression in E. coli and purification to homogeneity, both of the mutant proteins were found to have similar biochemical characteristics as wild type PAI-1 (wtPAI-1). Following labelling with 4-chloro-7-nitrobenzofurazan (NBD) and 2-(4'-iodoacetamido-anilino)naphtalene-6-sulfonic acid (IAANS) the mutant inhibitors showed similar inhibitory activities and heat stability as wtPAI-1. The purified complex between uPA and NBD-labelled P3cys mutant was found to be extremely stable, suggesting that no slow cleavage or reversible reaction occurs in complexes that have been properly formed. The rate of labelling of both mutants was decreased when the mutants were in the latent form indicating that these cysteine residues may be less accessible in the latent configuration. The PAI-1 mutants labelled with both NBD and IAANS could convert from the active to the latent form, but P3cys labelled with the larger IAANS chromophore showed a two fold decrease in the rate of conversion to latency, suggesting that a large chromophore in the P3 position may interfere with the active to latent conversion. The fluorescence spectra of the two NBD labelled mutants were similar, but the intensity was three times higher for the P3cys mutant than for P18cys. No significant spectral changes could be seen when the P3cys mutant was transferred to latency. In contrast, the P18cys mutant showed a major change in the excitation spectra characteristic of migration of the NBD chromophore from a thiol to an amine. Complex formation with uPA had no effect on the fluorescence spectrum of P18cys-NBD while the spectrum of P3cys-NBD revealed changes consistent with a restriction of the mobility of NBD probe in the uPA-PAI-1 complex.

Base Sequence↗