PubMed Health⌕ Search

Biomedical subjects

J L Ricci

Publications and source records attributed to J L Ricci.

At least 19 recordsLinked to original sources
PubMed1997

Protein denaturation induced by cyclic silicone.

While it has been demonstrated that such low-molecular-weight cyclic silicones as octamethylcyclotetrasiloxane (D4) exhibit adjuvant activity, the mechanism of immunological response to silicone is still not clear. This study therefore used fluorescence and circular dichroism (CD) spectroscopy to investigate the denaturation and conformational change of two proteins, fibronectin (Fn) and fibrinogen (Fbg), induced by D4 in vitro. Incubating D4 with Fbg or Fn at D4-to-protein ratios of > 100 or for > 10 h yielded white and mould-like precipitates of the proteins, indicating massive denaturation and aggregation. The fact that the decrease in fluorescence intensity of D4-treated Fn and Fbg was accompanied by a red shift in the maximum wavelength also indicated that denaturation of the proteins had taken place. These changes in fluorescence might result from exposure of tryptophan residuals in the proteins to polar water molecules inasmuch as the denaturation would lead to changes in the tertiary structures of the proteins and rearrangement of the tryptophan residues. The loss of the tertiary structure leads to protein denaturation and, consequently, precipitation. The difference in CD spectra between control Fbg (or Fn) and D4-treated Fbg (or Fn) indicated conformational changes of the proteins when incubated with D4. Thus it has been demonstrated that D4 can induce denaturation and conformational changes in Fbg and Fn and it can be expected that protein molecules that have undergone denaturation or conformational change induced by D4 may act as antigens and stimulate the immune system to generate antibodies, ultimately resulting in autoimmune disease.

Adjuvants, Immunologic↗
PubMed1997

Bone morphogenetic protein promotes vascularization and osteoinduction in preformed hydroxyapatite in the rabbit.

Early reconstruction of large osseous defects in children is often delayed due to limited availability of autogenous bone graft donor sites. With the advent of growth factors, osteoinductive proteins, and delivery matrices, it is possible to fabricate new bone at extraskeletal sites. Due to their own blood supply, adequate bony volume, and decreased resorption, vascularized bone flaps have demonstrated greater success in restoring large bony defects compared with nonvascularized bone grafts. The purpose of this study is to prefabricate a vascularized bone flap in the immature-age rabbit using the auricularis anterior muscle as a muscle pedicle. Sixteen female New Zealand White rabbits, 2.0 to 2.5 kg, were divided into two groups. Group 1 contained 8 animals that had T-shaped, 10 x 6 x 4-mm hydroxyapatite (HA) implants combined with 100-microgram bovine-derived bone morphogenetic protein (BMP) placed supraperiosteally and fixed deep to the auricularis anterior muscle. Implants with HA alone were placed in the same animal and secured to the contralateral auricularis anterior muscle. Group 2 contained 8 animals that had HA/BMP placed subperiosteally and fixed deep to the auricularis anterior muscle, while implants with HA alone were secured in the same animal to the contralateral auricularis anterior muscle. In each group, 4 animals were sacrificed at 4 and 8 weeks. The animals underwent randomized bilateral carotid artery injection with micropaque barium suspension just prior to sacrifice to help maintain vascularity. At harvest the implants and surrounding muscle and cranium were removed en bloc. New bone formation in the HA implants was examined by using routine histology and scanning electron microscopic backscattering image (quantitative) analysis. Microradiographs were performed on representative specimens. At 4 weeks postimplantation, backscattering analysis in the subperiosteal HA/BMP showed a mean 17.1% bone ingrowth vs. 11.3% of HA alone (p < 0.05). Supraperiosteal HA/BMP showed a mean 12.9% bone ingrowth vs. 0% of HA alone (p < 0.05). At 8 weeks, backscatter analysis of supraperiosteal HA/BMP showed a mean 19.33% bone ingrowth vs. 0% of HA alone (p < 0.05). Subperiosteal HA/BMP showed a mean 22% bone ingrowth vs. 20.85% of HA alone. This was the only group that did not have statistically significant results. Implant histology demonstrated woven bone within the interstices of HA/BMP placed either supra- or subperiosteally. In the HA-alone implants placed supraperiosteally, fibrovascular ingrowth was seen without any evidence of bone formation. In the HA-alone implant placed subperiosteally, woven bone was seen at the calvarium-implant junction. Microradiographs also demonstrated vascularization and bone formation similar to that seen on scanning electron microscopy. BMP-treated specimens appeared to have slightly greater vascularity than the nontreated specimens. The greatest bone formation occurred with the HA/BMP implant placed subperiosteally in the immature rabbit. Furthermore, these results demonstrate the potential prefabrication of vascularized bone flaps as early as 4 to 8 weeks. The clinical advantage of HA permits the surgeon to design osseous flaps that are customized in shape, fill all contour defects, and have little resorptive properties. Such prefabricated bone with an axial blood supply may allow for ultimate transfer as a pedicle or free flap to reconstruct osseous defects in children.

Angiography↗
PubMed1997

Bioresorbable fracture fixation in orthopedics: a comprehensive review. Part I. Basic science and preclinical studies.

Metal alloys are currently the most popular materials for manufacture of fracture-fixation devices. Two major disadvantages of these materials are their extreme stiffness, which causes stress shielding of the underlying bone, and the necessity, in a significant number of cases, of removing metallic implants after fracture healing is complete. These shortcomings of metal alloys have led to the study of bioresorbable materials for use in fracture fixation. Currently, polylactic acid, polyglycolic acid, and polydioxanone implants are available to the orthopedic surgeon for the fixation of small cancellous bone fractures. Part I of this article provides an overview of the basic science of bioresorbable materials and presents a comprehensive review of preclinical studies reported in the orthopedic literature. Clinical studies will be reviewed in Part II.

Alloys↗
PubMed1997

Bioresorbable fracture fixation in orthopedics: a comprehensive review. Part II. Clinical studies.

Bioresorbable materials overcome two major disadvantages of the metal alloys most commonly used in fracture-fixation devices: their extreme stiffness, which causes stress shielding of the underlying bone, and the necessity, in a significant number of cases, of removing metallic implants after fracture healing is complete. The orthopedic surgeon now has the use of polylactic acid, polyglycolic acid, and polydioxanone implants for the fixation of small cancellous bone fractures. The currently available bioresorbable materials lack strength and stiffness and are associated with inflammatory reactions and osteolysis in a significant number of cases. Surgeons should use the available pins and screws with extreme care and attention to the characteristics of each individual injury, particularly its healing characteristics, as well as to the material's initial mechanical properties, degradation rates, and associated complications.

Biocompatible Materials↗
PubMed1996

Biomechanical and histological analysis of an HA coated, arc deposited CPTi canine hip prosthesis.

The interfacial shear strength and bone tissue response was investigated for an arc deposited (AD) commercially pure titanium implant surface, with (AD/HA) and without (AD) plasma-sprayed hydroxyapatite (HA) coating. Ten purpose bred coonhounds received bilateral femoral stem implantation (AD and AD/HA) in the proximal femurs (hemiarthroplasty). The femoral prosthesis consisted of a modular CoCr alloy head, modular Ti-6Al-4V neck, and a 10-mm diameter cylindrical Ti-6Al-4V femoral stem. The AD surface had 30-35% greater surface roughness than the AD/HA surface. The HA coating had a purity greater than 90% and a crystallinity greater than 65%. After 6, 12, and 24 weeks, the implants were retrieved and analyzed with mechanical testing, qualitative and quantitative histology, and electron microscopy. The AD/HA implants had equivalent interfacial shear strengths to the AD implants at all time periods. The AD/HA implants had significantly greater linear bone contact than the AD implants. The 6-week implants had significantly thicker cortical bone than the 12- and 24-week implants. The HA coating was very stable in vivo, evidenced by no thickness reduction at any time period. Qualitatively, the AD/HA implants primarily had bone contacting the implant surface with little fibrous tissue present, and the AD implants had bone and fibrous tissue contacting the implant surface. The electron microscopy analysis showed that the mechanically tested implants exhibited a mixed failure mode at the bone, HA coating, and titanium interfaces.

Animals↗
PubMed1996

Effects of nitric oxide on chondrocyte migration, adhesion, and cytoskeletal assembly.

OBJECTIVE: The migration of cells of chondrocyte lineage is believed to play a role in cartilage growth and repair. The present study examined 1) whether chondrocytes are capable of migration in vitro; and 2) the effects of nitric oxide (NO) on chondrocyte migration, adhesion, and cytoskeletal assembly. METHODS: Chondrocyte migration was evaluated by 2 assays: 1) "centrifugal" migration within a 3-dimensional collagen matrix (dot culture); and 2) directed migration under agarose in response to bone morphogenetic protein. To assess the effects of NO, chondrocytes were treated with either exogenous NO (S-nitrosoglutathione [SNO-GSH]) or a mixture of cytokines known to induce endogenous NO production. The effects of NO on chondrocyte adhesion to fibronectin-coated surfaces, as well as on actin polymerization (determined by indirect immunofluorescence), were also examined. RESULTS: The capacity of chondrocytes to migrate was demonstrated both by the dot culture and by agarose methods. Both SNO-GSH and endogenous NO induced by cytokines inhibited this migration. Exposure to NO also inhibited attachment of chondrocytes to fibronectin and disrupted assembly of actin filaments. These effects of SNO-GSH and cytokine-induced NO production were reversed in the presence of hemoglobin and the NO synthase inhibitor NG-monomethyl arginine, respectively. CONCLUSION: NO interferes with chondrocyte migration and attachment to fibronectin, an extracellular matrix protein, probably via effects on the actin cytoskeleton. These effects of NO may result in impairment of cartilage repair, by interfering with the extracellular matrix regulation of chondrocyte function.

Animals↗
PubMed1996

Analysis of osteoblast mineral deposits on orthopaedic/dental implant metals.

Neonatal rat calvarial osteoblasts were cultured on Ti-6Al-4V, Co-Cr-Mo alloy, 316L stainless steel and polystyrene (reference substrate) in the presence of ascorbic acid and 10 mM beta-glycerophosphate for 16, 17, 18, 19, 20, 21, 24 and 28 d. Scanning electron microscopy examination revealed that osteoblasts cultured on these orthopaedic/dental implant metals synthesized and deposited an extracellular matrix containing collagenous and non-collagenous components, as well as mineral nodules of various morphologies. Energy dispersive spectrometry revealed that the mineral deposits consisted of three distinct chemical compositions: calcium phosphate, calcium-sulphur-phosphorus, and calcium only. Backscattered electron imaging demonstrated that both the calcium phosphate and calcium-only deposits were electron dense, while the calcium-sulphur-phosphorus deposits were electron translucent. X-ray diffraction analysis indicated that the bulk of the osteoblast mineral deposits was amorphous hydroxyapatite; in addition, electron diffraction analysis revealed small regions of crystalline hydroxyapatite.

Alloys↗
PubMed1995

Determination of the mineral phases and structure of the bone-implant interface using Raman spectroscopy.

The bone-implant interface formed in a canine distal femur was examined by means of a Raman microprobe using an implant model designed to test calcium phosphate surface coatings. By using the 960 cm-1 band of calcium phosphate to characterize the interface and adjacent mineral, we obtained spatial and compositional information about the attachment of bone to the synthetic calcium phosphate coating on a titanium support. The interface between bone and the synthetic calcium phosphate is approximately 30-40 microns in width.

Animals↗
PubMed1995

Histology and histomorphometric analysis of the normal and atrophic heel fat pad.

Light and electron microscopy was used for a histologic examination of normal heel fat pads and atrophic heel fat pads from patients with peripheral neuropathies. Histomorphometric analysis revealed an average 30% smaller mean cell area and 16% smaller mean cell diameters in the atrophic pads compared with the normal heel fat pads. Septal walls in the atrophic fat pads were often fragmented and approximately 75% wider than normal. Perineural fibrosis was also found in the atrophic heel fat pads. The Verhoeff elastic staining technique was used to determine the relative percentage of collagen to elastic tissue within the septae. No significant differences were noted between the normal and atrophic heels. The ultrastructure of the adipocytes from the normal and atrophic heel pads was similar to those found in abdominal subcutaneous fat. Lipid droplets of variable size and density thin the center of the adipocyte were surrounded by a thin border of cytoplasm. The interphase between adipocytes contained fine collagen and elastic fibers.

Adipose Tissue↗
PubMed1994

Hydroxyapatite enhancement of posterior spinal instrumentation fixation.

STUDY DESIGN: The ability of hydroxyapatite (HA) materials to enhance the fixation strength of posterior spinal instrumentation was examined in 19 adult mongrel dogs. METHODS: Sixteen dogs underwent bilateral placement of lumbar transpedicular screws from L1 to L6, sacral alar screws, and posterior iliac rods. The six transpedicular screw test groups included standard and plasma-sprayed HA-coated screws with the recommended insertion technique, standard and HA-coated screws with a poor initial fit insertion technique using an oversized pilot hole, and HA-grout augmentation of standard and HA-coated screws with a poor initial fit. The sacral alar screws and posterior iliac rods were either uncoated or HA-coated. Six dogs were killed immediately; ten dogs were killed at 6 weeks, and the fixation elements were mechanically tested or histologically examined. Three additional dogs and synthetic bone material were used for additional baseline mechanical testing. RESULTS: The strength of standard screws with recommended insertion did not change after 6 weeks in vivo. HA-coated screws were initially 13% less resistant to pull out than standard screws, but this difference was not significant at 6 weeks. Screws inserted with a poor initial fit technique were significantly weaker initially; at 6 weeks, pull-out strength was similar to the standard screws properly inserted. The HA-grout material significantly enhanced pull-out strength for both screw types at 6 weeks. Sacral alar screw pull-out strength was not significantly different between standard and HA-coated screws initially or at 6 weeks. HA-coated rods were initially twice as resistant to pull out than standard rods and became stronger after 6 weeks in vivo, whereas standard rods became significantly weaker. Histologically, the quantity and morphology of bone around all implants was similar, with HA-coated rods and screws demonstrating regions of direct attachment to bone. An osteoconductive response and new bone formation was observed within the HA-grout material. Scanning electron microscopic observation of mechanically tested implants revealed a shear failure of surrounding bone (and HA if present) at the screw outer thread margin or at the bone-metal or HA-metal interfaces for the posterior iliac rods. CONCLUSIONS: The strength of poorly inserted transpedicular screws was significantly enhanced in vivo by the resorbable HA-grout material. The lower strength of HA-coated screws was attributed to screw geometry changes resulting from the coating process, and modifications of screw coating are recommended.

Animals↗
PubMed1994

Formation of a calcium phosphate-rich layer on absorbable calcium carbonate bone graft substitutes.

The use of natural coral as a bone graft substitute is common in Europe. However, the bone-coral bonding mechanism remains elusive. A rat subcutaneous model was used to demonstrate changes at the surface of resorbable calcium carbonate in the form of natural coral. Histological results indicated in vivo formation of a calcium phosphate (CaP)-rich layer on the surface of the coral confirmed by backscattered electron imaging and X-ray microanalysis. There appears to be a combination solution-mediated dissolution/cell-mediated degradation of the natural coral with subsequent surface conversion or precipitation. The end result is a CaP-rich layer on the coral. Though this layer has been observed previously, it was originally thought to be a histological artifact. This result is similar, however, to what is seen with Bioglass and glass ceramics and may also explain the good bonding of bone to hydroxyapatite. The fact that this layer is also present on natural coral after implantation in soft tissue sites may explain the intimate bone apposition observed when natural coral is placed in bony sites.

Absorption↗
PubMed1994

In vivo evaluation of collagen-coated Dacron fiber in bone.

To evaluate the influence of type I collagen and hydroxyapatite coatings on the ability of Dacron fiber to achieve biologic fixation to bone, tows with the following coatings were evaluated in vivo: avian collagen (A); an avian collagen/hydroxyapatite composite (AH); bovine tendon collagen (B); a bovine tendon collagen/hydroxyapatite composite (BH); and plain (uncoated) Dacron tow (C). The Dacron tows were placed unstressed in the cancellous bone of both lateral femoral condyles of rabbits. Tissue reaction to each kind of Dacron tow was evaluated histopathologically, histomorphometrically and biomechanically. Inflammatory reaction was apparent around the AH and BH Dacron fibers at 2 weeks. There was no such reaction in the A, B, and C specimens, thus implicating the hydroxyapatite particles as the cause. At later time periods specimens A, B, and C all induced new bone formation. Direct contact between the Dacron fibers and trabecular bone was apparent in A and B. The pull-out strength of the B fibers was higher than the controls at a statistically significant level, but there was no significant difference between any of the other specimens and C (controls). There was no significant difference between any coating and controls at 8 or 16 weeks. Dacron fibers coated with bovine tendon collagen exhibited the best biocompatibility to bone and improved the anchoring to bone in the early time intervals by maintaining direct contact between Dacron fibers and trabecular bone.(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗
PubMed1993

Carcinoid of the ampulla of Vater. Local resection or pancreaticoduodenectomy.

BACKGROUND: Carcinoid of the ampulla of Vater is a rare lesion that may produce obstructive jaundice. Analysis of nodal involvement as a function of primary tumor sizes indicated that metastases occur with tumors smaller than 2.0 cm. The case of a 36-year-old woman is presented and the literature reviewed in an attempt to define the treatment of choice. METHODS: The English literature was reviewed, and 27 cases including the current one were identified. All cases were traced to the original case report. Clinical outcome data were tabulated. RESULTS: The mean age of the sample group was 48.5 years, with 52% men and 48% women. Jaundice occurred in 60% of patients. Ampullary carcinoid developed in nine patients in association with von Recklinghausen disease. Treatment included pancreaticoduodenectomy, local excision, and biliary-enteric and endoscopic stenting. Seven patients had positive nodes. Four had metastatic disease at the time of surgical treatment. Long-term survivals of 5.5 years and 5 years were achieved after local excision and pancreaticoduodenectomy, respectively. CONCLUSIONS: Long-term survival is possible after local excision or pancreaticoduodenectomy.

Adult↗
PubMed1992

Evaluation of a low-temperature calcium phosphate particulate implant material: physical-chemical properties and in vivo bone response.

A study was conducted to evaluate the osteoconductive ability of a particulate, low-temperature hydroxylapatite (HA(LT)) material (OsteoGen; Impladent, Holliswood, NY). An implantable chamber model was used to determine the ability of this material to encourage bone ingrowth into channels lined with either rough-surfaced titanium or rough-surfaced plasma-sprayed hydroxylapatite. The HA(LT) material increased bone ingrowth into the titanium-lined channels comparable with that in plasma-sprayed hydroxylapatite-coated channels. It was incorporated into ingrowing bone without intervening soft tissue, with the bone bonding directly to the material surface in much the same fashion as it bonds at the plasma-sprayed hydroxylapatite surface. Mechanical testing of the ingrown bone showed no weakness because particles were incorporated. At 12 weeks, the particles began to show signs of dissolution. It was concluded that the HA(LT) material is a biocompatible, osteoconductive material that conducts bone ingrowth in much the same way as high-temperature particulate hydroxylapatite ceramics. This material has the additional desirable property of being slowly resorbable, a beneficial characteristic for many bone-filling applications.

Animals↗
PubMed1991

In vitro tendon cell growth rates on a synthetic fiber scaffold material and on standard culture plates.

Growth rates of rat tendon fibroblasts cultured in a three-dimensional carbon fiber matrix were compared with those of cells cultured on standard flat culture plates. The carbon fiber has been used as a tissue scaffold for tendon and ligament repair in animal and clinical studies. While cell growth on the culture plates appears to follow a growth curve containing a lag phase, a log phase, and plateau phase of growth, cell growth in the fiber matrix was characterized by a suppressed log phase of growth. SEM and cytotoxicity studies indicated that this effect was not caused by growth-inhibiting or cytotoxic substances from the carbon fiber. While we cannot rule out the possibility that cell growth was influenced by the surface chemistry of the carbon substrate, evidence from this and other studies suggests that the observed effect was caused by a lack of readily available surface area for cell attachment and growth on the small fibers. Because cell colonies growing on individual fibers are limited (at least in theory) to growing in two directions only, they enjoy limited opportunities for cell migration and growth--in contrast with cell colonies on flat culture plates. These results suggest fundamental differences in the mechanisms controlling cell growth on planar vs. three-dimensional fiber substrates.

Animals↗
PubMed1991

Molecular structure at the bone-implant interface: a vibrational spectroscopic characterization.

Test implant plates surgically retrieved from distal femurs of dogs were studied by Raman spectroscopy in order to characterize the bone-implant interface. The implant surface consisted of phosphate mineral, plasma sprayed on a titanium substrate. On the basis of its spectroscopic signature, the phosphate mineral of bone and the implant surface formed a mixed phase in the interface.

Animals↗