Biomedical subjects

J L Sechler

Publications and source records attributed to J L Sechler.

10 recordsLinked to original sources

PubMed2001

A novel fibronectin binding site required for fibronectin fibril growth during matrix assembly.

Fibronectin (FN) assembly into a fibrillar extracellular matrix is a stepwise process requiring participation from multiple FN domains. Fibril formation is regulated in part by segments within the first seven type III repeats (III1-7). To define the specific function(s) of this region, recombinant FNs (recFNs) containing an overlapping set of deletions were tested for the ability to assemble into fibrils. Surprisingly, recFN lacking type III repeat III1 (FNDeltaIII1), which contains a cryptic FN binding site and has been suggested to be essential for fibril assembly, formed a matrix identical in all respects to a native FN matrix. Similarly, displacement of the cell binding domain in repeats III9-10 to a position close to the NH2-terminal assembly domain, as well as a large deletion spanning repeats III4-7, had no effect on assembly. In contrast, two deletions that included repeat III2, DeltaIII1-2 and DeltaIII2-5, caused significant reductions in fibril elongation, although binding of FN to the cell surface and initiation of assembly still proceeded. Using individual repeats in binding assays, we show that III2 but not III1 contains an FN binding site. Thus, these results pinpoint repeat III2 as an important module for FN-FN interactions during fibril growth.

Animals↗

PubMed2000

A novel RGD-independent fibronectin assembly pathway initiated by alpha4beta1 integrin binding to the alternatively spliced V region.

Fibronectin (FN) matrix assembly is a multi-step process that involves binding to integrin receptors, FN-FN interactions and connections to the actin cytoskeleton. Ultimately, FN is converted into stable matrix fibrils that are detergent-insoluble. RGD-binding integrins such as alpha5beta1 play a major role in the assembly of fibrillar FN. Here we show that alpha4beta1 binding to the alternatively spliced V (IIICS) region of FN initiates an alternative assembly pathway. Activation of alpha4beta1 with exogenous agents such as Mn(2+) or a beta1-stimulatory antibody TS2/16 was sufficient to induce initiation of FN fibrillogenesis by Ramos B lymphoma cells and by CHO(B2)alpha4 cells. Using recombinant FNs lacking specific sequences, we show that assembly is independent of the RGD sequence but requires the V25/CS-1 segment. Previously, we have characterized an activated recombinant FN (FN III(1-7)) that rapidly forms detergent-insoluble multimers upon binding to alpha5beta1 integrin. Alpha4beta1 also formed FNdeltaIII(1-7) multimers without the aid of exogenous stimulants, suggesting that an activated form of FN can override the need for activation of the integrin. In contrast to assembly by alpha5beta1, actin filaments remained largely cortical and no change in cell growth rate was observed with alpha4beta1-mediated assembly. These results show that binding sites on FN other than the RGD sequence/synergy site and distant from the cell binding domain can promote FN assembly. Thus, there appear to be multiple, integrin-specific mechanisms for assembly of FN matrix.

Alternative Splicing↗

PubMed1999

Fibronectin fibrillogenesis: a paradigm for extracellular matrix assembly.

Fibronectin matrix assembly is a regulated stepwise process. In the past year, analyses of fibronectin domains, integrin and cytoskeletal contributions, and fibril architecture have provided new insights into assembly mechanisms and matrix control of cell functions. Like fibronectin, laminin polymerization is cell-mediated. Thus a common pathway for extracellular matrix assembly is emerging.

Animals↗

PubMed1998

Modulation of cell-extracellular matrix interactions.

Changes in extracellular matrix (ECM) structure and composition, such as occur during morphogenesis, can have important regulatory effects on cell behavior. Two fibronectin (FN)-based systems have been developed to dissect how cells respond to different types of ECM. One system mimics the provisional matrix of the wound and is composed of FN cross-linked into a fibrin clot matrix. Unlike cells on FN alone, cells on an FN-fibrin matrix are smaller with cortical distribution of actin filaments and membrane ruffles. Addition of the ECM protein tenascin to the FN-fibrin matrix induces a different cell morphology. Thus, matrix composition can have profound effects on cell phenotype. Cells also interact with FN while assembling it into a fibrillar matrix. Using recombinant FNs, a domain that is required for normal progression of FN fibril formation has been identified. During assembly of this recombinant matrix, formation of actin stress fibers and focal adhesions is delayed, demonstrating that changes in FN matrix structure can affect intracellular organization and activation of signaling pathways.

Actins↗

PubMed1998

Control of cell cycle progression by fibronectin matrix architecture.

Developmental patterning and differentiation, maintenance of parenchymal cell function, and the size, shape, and invasiveness of tumors are all orchestrated by cell interactions with the extracellular matrix. Here we show that the fibrillar structure of fibronectin (FN) matrix encodes essential regulatory cues and controls cell proliferation and signaling through changes in matrix architecture. A matrix assembled from native FN stimulated cell growth. In contrast, a mutant FN (FNDeltaIII1-7) that contains all known cell binding motifs but forms a structurally distinct matrix inhibited progression from G0/G1 into S phase. Furthermore, FNDeltaIII1-7 suppressed the stimulatory capacity of native FN and induced different levels of tyrosine phosphorylation of pp125(FAK). The differential effects on cell growth were ablated by blocking formation of matrix fibrils. Thus, modification of matrix architecture provides a novel approach to control cell proliferation.

Bromodeoxyuridine↗

PubMed1997

Modulatory roles for integrin activation and the synergy site of fibronectin during matrix assembly.

Initiation of fibronectin (FN) matrix assembly is dependent on specific interactions between FN and cell surface integrin receptors. Here, we show that de novo FN matrix assembly exhibits a slow phase during initiation of fibrillogenesis followed by a more rapid growth phase. Mn2+, which acts by enhancing integrin function, increased the rate of FN fibril growth, but only after the initial lag phase. The RGD cell-binding sequence in type III repeat 10 is an absolute requirement for initiation by alpha5beta1 integrin. To investigate the role of the cell-binding synergy site in the adjacent repeat III9, a full-length recombinant FN containing a synergy mutation, FN(syn-), was tested for its ability to form fibrils. Mutation of this site drastically reduced FN assembly by CHOalpha5 cells. Only sparse short fibrils were formed even after prolonged incubation, indicating that FN(syn-) is defective in progression of the assembly process. These results show that the synergy site is essential for alpha5beta1-mediated accumulation of a FN matrix. However, the incorporation of FN(syn-) into fibrils and the deoxycholate-insoluble matrix could be stimulated by Mn2+. Therefore, exogenous activation of integrin receptors can overcome the requirement for FN's synergy site as well as modulate the rate of FN matrix formation.

Animals↗

PubMed1997

Coordinated regulation of fibronectin fibril assembly and actin stress fiber formation.

Assembly of a fibronectin (FN) matrix is a multistep process which influences a number of cellular functions including intracellular cytoskeletal organization and signaling responses. We have previously reported on a recombinant FN (recFN), FN delta III1-7, which differs from native FN in its rate of fibril formation. To determine the intracellular consequences of a delay in assembly, we compared the distribution of cytoskeletal proteins during the formation of native and recFN matrices by immunofluorescence at various time points. CHO alpha 5 cell cytoskeleton was reorganized in response to both native and recFN matrix formation. Assembly of native FN induced a rapid reorganization of actin into stress fibers and colocalization of alpha 5 beta 1 integrin, focal adhesion kinase (FAK), vinculin, and paxillin to regions of cell-matrix contact. alpha 5 beta 1 integrins and FAK are also clustered upon binding of FN delta III1-7 to cells but actin reorganization and focal adhesion formation are delayed and appear to be dependent on the formation of FN delta III1-7 fibrils. These results suggest that the structural framework of the matrix plays an important role in the ability of FN to initiate intracellular responses.

Actins↗

PubMed1996

Altered rate of fibronectin matrix assembly by deletion of the first type III repeats.

The assembly of fibronectin (FN) into a fibrillar matrix is a complex stepwise process that involves binding to integrin receptors as well as interactions between FN molecules. To follow the progression of matrix formation and determine the stages during which specific domains function, we have developed cell lines that lack an endogenous FN matrix but will form fibrils when provided with exogenous FN. Recombinant FNs (recFN) containing deletions of either the RGD cell-binding sequence (RGD-) or the first type III repeats (FN delta III1-7) including the III1 FN binding site were generated with the baculovirus insect cell expression system. After addition to cells, recFN matrix assembly was monitored by indirect immunofluorescence and by insolubility in the detergent deoxycholate (DOC). In the absence of any native FN, FN delta III1-7 was assembled into fibrils and was converted into DOC-insoluble matrix. This process could be inhibited by the amino-terminal 70 kD fragment of FN, showing that FN delta III1-7 follows an assembly pathway similar to FN. The progression of FN delta III1-7 assembly differed from native FN in that the recFN became DOC-insoluble more quickly. In contrast, RGD- recFNs were not formed into fibrils except when added in combination with native FN. These results show that the RGD sequence is essential for the initiation step but fibrils can form independently of the III1-7 modules. The altered rate of FN delta III1-7 assembly suggests that one function of the missing repeats might be to modulate an early stage of matrix formation.

Animals↗

PubMed1995

Elastin gene mutations in transgenic mice.

We have constructed several rat tropoelastin minigene recombinants encoding the complete sequence of rat tropoelastin, two isoforms of rat tropoelastin and a truncated tropoelastin lacking the domains encoded by exons 19-31 of the rat gene. Coding and non-coding domains in all these recombinants were placed under the transcriptional control of 3 kb of the promoter domain of the rat tropoelastin gene. These minigenes were used to prepare a total of 28 separate founder lines of transgenic mice. A species-specific reverse-transcriptase polymerase chain reaction (RT-PCR) assay was established to demonstrate the synthesis of rat and mouse tropoelastin mRNA in several tissues obtained from both neonatal and adult transgenic mice. Thermolytic digestion of insoluble elastin isolated from several neonatal mouse tissues revealed the presence of rat tropoelastin peptides in progeny from all those founder mice in which detectable levels of rat tropoelastin mRNA were noted. Phenotypic and histopathological assessment of transgenic and non-transgenic animals revealed the development of two diverse elastic tissue disorders. The progeny of two separate founder lines overexpressing the rat tropoelastin isoform lacking exon 33, developed an emphysematous phenotype in early adulthood. In contrast, transgenic mice, in which expression of the truncated rat tropoelastin minigene lacking exons 19-31 had been observed, died of a ruptured ascending aortic aneurysm. Tropoelastin gene mutations, therefore, will result in heritable disorders of elastic tissue. Moreover, different mutations in the tropoelastin gene will be responsible for very different abnormalities in elastic tissue function.

Animals↗

PubMed1994

Use of an intron polymorphism to localize the tropoelastin gene to mouse chromosome 5 in a region of linkage conservation with human chromosome 7.

The complete coding sequence for mouse tropoelastin was obtained from overlapping reverse transcriptase polymerase chain reaction (PCR) amplimers. These cDNA fragments were derived from mouse tropoelastin mRNA using PCR oligomers complementary to conserved domains within rat tropoelastin mRNA. A comparison of coding domains of mouse and rat tropoelastin mRNA revealed a greater than 93% homology at the nucleotide level and over 96% similarity in the predicted amino acid sequence. PCR primers complementary to regions of the mouse tropoelastin mRNA were used to define a novel intron length polymorphism (ILP) within intron 8 of the mouse tropoelastin gene (Eln). This ILP proved to be informative in an interspecific backcross in which genomic DNA samples from 75 backcross mice were used to map the tropoelastin gene to a position in the distal half of mouse chromosome 5. The linkage and genetic distances between Eln and the closest molecular markers used in this study are centromere-D5Mit95, D5Mit96-6.7 cM-Gus, Eln-4.0 cM-Zp3-telomere.

Amino Acid Sequence↗