PubMed Health⌕ Search

Biomedical subjects

J Love

Publications and source records attributed to J Love.

At least 19 recordsLinked to original sources
PubMed2005

Chlorhexidine-modified glass ionomer for band cementation? An in vitro study.

OBJECTIVE: To compare the mean retentive strength, predominant site of band failure, amount of cement remaining on the tooth at deband and survival time of orthodontic micro-etched bands cemented with chlorhexidine-modified (CHXGIC) or conventional glass ionomer cement (GIC). DESIGN: In vitro study. SETTING: Dental Materials Laboratory. MATERIALS AND METHODS: One-hundred-and-twenty intact, caries-free third molars were collected from patients attending for third molar surgery. These were stored for 3 months in distilled water and decontaminated in 0.5% chloramine. To assess retentive strength, 80 teeth were randomly selected and 40 were banded with each cement. Testing was undertaken using a Nene M3000 testing machine at a cross-head speed of 1 mm/min. Following debanding, the predominant site of failure was recorded as cement-enamel or cement-band interface. The amount of cement remaining on the tooth surface following deband was assessed and coded. Survival time for another 40 banded specimens, 20 cemented with each cement, was assessed following application of mechanical stress in a ball mill. MAIN OUTCOME MEASURES: Retentive strength, predominant site of failure, amount of cement remaining on the tooth surface, survival time. RESULTS: Mean retentive strength for bands cemented with CHXGIC (0.32 MPa, SD 0.09) or GIC (0.28 MPa, SD 0.07) did not differ significantly (p=0.05). All bands failed at the enamel-cement interface. There was no significant difference in the amount of cement remaining on the tooth surface after deband for each cement type (p=0.23). The mean survival time of bands cemented with CHXGIC or GIC was 7.0 and 6.4 hours, respectively (p=0.23). CONCLUSIONS: There was no significant difference in mean retentive strength, amount of cement remaining on the tooth after deband or mean survival time of bands cemented with CHXGIC or GIC. Bands cemented with either cement failed predominantly at the enamel-cement interface. The results suggest that CHXGIC may have comparable clinical performance to GIC for band cementation.

Anti-Infective Agents, Local↗
PubMed2003

Resin-modified glass ionomer, modified composite or conventional glass ionomer for band cementation?--an in vitro evaluation.

The aims of this study were to compare the mean shear-peel bond strength and predominant site of bond failure of micro-etched orthodontic bands cemented with resin-modified glass ionomer cement (RMGIC; Fuji Ortho LC or 3M Multi-Cure), a modified composite or a conventional GIC. The survival time of bands was also assessed following simulated mechanical stress in a ball mill. One hundred and twenty molar bands were cemented to extracted human third molars. Eighty bands (20 cemented with each cement) were used to assess the debonding force and 40 bands (10 cemented with each cement) were used to determine survival time. The specimens were prepared in accordance with the manufacturers' instructions for each cement. After storage in a humidor at 37 degrees C for 24 hours, the shear debonding force was assessed for each specimen using a Nene M3000 testing machine with a crosshead speed of 1 mm/minute. The predominant site of band failure was recorded visually for all specimens as either at the band/cement or cement/enamel interface. Survival time was assessed following application of mechanical stress in a ball mill. There was no significant difference in mean shear-peel bond strength between the cement groups (P = 0.816). The proportion of specimens failing at each interface differed significantly between cement groups (P < 0.001). The predominant site of bond failure for bands cemented with the RMGIC (Fuji Ortho LC) or the modified composite was at the enamel/cement interface, whereas bands cemented with 3M Multi-Cure failed predominantly at the cement/band interface. Conventional GIC specimens failed mostly at the enamel/cement interface. The mean survival time of bands cemented with either of the RMGICs or with the modified composite was significantly longer than for those cemented with the conventional GIC. The findings indicate that although there appears to be equivalence in the mean shear-peel bond strength of the band cements assessed, the fatigue properties of the conventional GIC when subjected to simulated mechanical stress seem inferior to those of the other cements for band cementation.

Acid Etching, Dental↗
PubMed2002

Powered vs manual tooth brushing in fixed appliance patients: a short term randomized clinical trial.

Sixty-three orthodontic patients wearing upper and lower fixed appliances were randomly assigned to use either a powered toothbrush fitted with a modified orthodontic brush head (Braun Oral-B Plaque Remover 3D) or a manual toothbrush (Reach Compact Medium). A trained hygienist instructed each patient on the proper use of the allocated brush. Measurements of plaque and gingival health were made at baseline, at four weeks, and at eight weeks. Data for each group were analyzed using paired t-tests. Patients using the powered toothbrush showed a significant reduction in percentage interdental bleeding scores from baseline to four weeks (-12.7, P = .003) and this was still apparent at eight weeks (-8.6, P = .028), although there were no statistically significant changes in either plaque or gingivitis scores for this group. Those patients using a manual toothbrush showed a significant reduction in mean plaque score from baseline (four weeks = -0.18, P = < .001; eight weeks = -0.12, P = .016), but gingivitis scores were only reduced significantly at four weeks. In this group, interdental bleeding scores reduced significantly at four weeks (P = .028), but were not significantly different from baseline at eight weeks (P = .0319). When the two patient groups were compared using two sample t-tests, there were no significant differences in any of the parameters measured at any time point in the study. Over an eight-week period, there were no measurable differences between the powered toothbrush with modified orthodontic brush head and a manual toothbrush with respect to mean change in plaque, gingivitis, or interdental bleeding scores when used by patients wearing fixed appliances.

Adolescent↗
PubMed2001

Reference materials--a view from a small country.

ISO/IEC 17025 has an increased emphasis on traceability and estimation of uncertainty of measurement compared with ISO Guide 25. Demonstration of traceability is a new concept in analytical chemistry and depends on access to relevant reference materials or use of reference methods. Until now most reference materials used in New Zealand have been imported, because they offered international comparability. New Zealand is currently starting to develop the required infrastructure so that it will be able to produce unique reference materials that will contribute to the total international effort in improving the reliability of analytical chemistry.

Chemistry Techniques, Analytical↗
PubMed2001

A framework for modelling in S88 constructs for scheduling purposes.

ISA S88.01 [1] [ISA (ANSI/S88.01.1995), Standard batch control; part 1: models and terminology, Instrument Society of America, 1995] is a standard that provides a methodology for the dissemination of a batch into standard models and provides the terminology for defining the control requirements of batch plants. The nature of S88 is such that it is not only applicable to the development of computer control systems for a batch plant, but also could be utilised within batch management software, i.e. scheduling. This paper presents a method of interpreting multi-purpose/product batch plant into S88 constructs to provide an object oriented framework for the research and development of a batch scheduling Matlab tool-box. Such a framework provides a thorough and efficient method of articulating the model to effectively apply automatic scheduling/optimisation methods.

Journal Article↗
PubMed2001

Bonded molar tubes--an in vitro evaluation.

This study aimed to evaluate the mean shear bond strength of molar tubes with micro-etched bases bonded with either a compomer (Ultra Band-Lok), a resin-modified glass ionomer cement (3M Multi-Cure or Fuji Ortho LC), or a light-cured resin adhesive (Transbond). The amount of adhesive remaining on the tooth surface following tube removal was assessed also. Finally, survival time of molar tubes bonded with each bonding agent was assessed following simulated mechanical fatigue in a ball mill. A total of 120 extracted human third molars were collected and randomly divided into 4 test groups. Thirty teeth (20 to assess debonding force and 10 to assess survival time) were bonded with each adhesive according to the manufacturers' instructions. Debonding was carried out using a Nene M3000 testing machine with a crosshead speed of 0.5 mm/min. The mean shear bond strength of tubes bonded with Transbond was significantly less than that of those bonded with 3M Multi-Cure (P = .0036) or Fuji Ortho LC (P < .0001). Tubes bonded with Ultra Band-Lok also had significantly lower mean shear bond strength than those bonded with Fuji Ortho LC (P = .020). Distribution of adhesive remnant index scores only differed significantly between tubes bonded with 3M Multi-Cure or Transbond. Only I molar tube, bonded with Transbond, debonded in the ball mill at 5 hours, but at 50 hours there was no significant difference in the survival time of tubes bonded with any of the bonding agents. Compomer or resin-modified glass ionomer cements appear to be viable alternatives to light-cured resin adhesive for bonding molar tubes.

Acrylic Resins↗
PubMed2001

A clinical retrospective evaluation of 2 orthodontic band cements.

This study aimed to compare the time to first failure of stainless steel orthodontic first permanent molar bands cemented with either a modified composite (Band-Lok, Reliance Orthodontic Products) or a conventional glass ionomer cement (AquaCem, De Trey Dentsply). The effect of patient sex, patient age at the start of treatment, the presenting malocclusion, treatment mechanics, and the operator proficiency on band survival was also assessed. Data for 219 bands cemented with Band-Lok in 108 patients and for 395 bands cemented with AquaCem in 183 patients were analyzed. For each case, a single molar band, either the band that was first to fail or the band that had the shortest follow-up time, was chosen for analysis. For each cement, whether headgear was used or not, there was no significant difference in time to first band failure (P = .398). Twenty-six percent of patients had at least one band failure with Band-Lok, and 30% of patients had at least one band failure with AquaCem, representing an 18% band failure rate for each cement. There was no significant difference in time to first band failure for either cement with respect to sex of the patient (P = .842), patient age at the start of treatment (P = .257), presenting malocclusion (P = .319), or operator proficiency (P = .062). The use of headgear, however, reduced significantly the time to first band failure irrespective of cement type (P = .0069). Headgear use was identified as a predictor of first permanent molar band survival. Clinical performance of bands cemented with either cement appears to be similar and was influenced significantly by the use of headgear.

Acrylic Resins↗
PubMed2001

Personality and neurocognitive correlates of impulsive aggression in long-term survivors of severe traumatic brain injury.

This study addresses a common outcome of severe traumatic brain injury (TBI), disinhibited aggressive behaviour. This behaviour has been classified in aggression literature as 'impulsive aggression' (IA). The purpose was to: (1) characterize those TBI patients who are likely to be an aggression risk, and (2) determine if TBI patients with IA demonstrate personality style and neurocognitive performance similar to that seen in other IA groups. Participants were 45 survivors of severe TBI (26 of whom had persisting problems with IA), who were clients of a residential brain injury treatment facility. IA participants had a higher incidence of pre-morbid aggressive behaviour, were younger, had a shorter tenure in the programine, and were more impulsive, irritable, and antisocial than the non-aggressive control participants. Unlike past research, no neurocognitive differences were found. The results are discussed in terms of the conceptualization, identification, and treatment of persisting IA in severe TBI.

Adult↗
PubMed2001

Effect of TCDD exposure on CYP1A1 and CYP1B1 expression in explant cultures of human endometrium.

Endometriosis is a debilitating disease estimated to affect 10% of reproductive-age women and characterized by the growth of endometrial tissue outside of the uterus. The present study characterizes a human endometrial explant culture model for studying the direct effects of TCDD exposure by assessing the expression of CYP1A1 and CYP1B1 mRNA (Northern blotting), protein (Western blotting), and activity (7-ethoxyresorufin-O-deethylase; EROD) in explants cultured with and without TCDD. Explants were obtained at laparoscopy or laparotomy from women undergoing surgery for tubal ligation, endometriosis, or pelvic pain unrelated to endometriosis. The explants were cultured with 10 nM estradiol (E(2)) or 1 nM E(2) plus 500 nM progesterone (P(4)) with or without TCDD (first 24 h). The expression of CYP1A1 and CYP1B1 mRNA was greatest with 10 nM TCDD and increased up to 72 h after initial exposure. EROD activity increased up to 120 h. Explants from a secretory phase biopsy became reorganized in culture and formed a new epithelial membrane, while maintaining basic endometrial morphology and viability for up to 120 h. At 24 h, TCDD significantly increased CYP1A1 and CYP1B1 mRNA, and at 72 h, TCDD significantly increased EROD activity and CYP1B1 protein compared to explants cultured without TCDD for similar times. CYP1B1 protein also exhibited substantial constitutive expression that was similar in uncultured biopsies, where CYP1B1 protein was immunolocalized in the cytoplasm of epithelial glands, with only occasional patches of protein in the surface epithelial membrane. In explants cultured with and without TCDD exposure, CYP1B1 protein was localized in the cytoplasm of the new surface epithelial membrane and glands closest to the surface. CYP1A1 protein was not detected in uncultured biopsies or explants. Both younger age (age 30 and under) and proliferative phase were associated with higher TCDD-induced EROD activity in specimens treated with E(2):P(4). No significant endometriosis-related differences were observed for any of the biomarkers, but the detection of disease-specific change was limited by small sample size and variability in tissue-cycle phase. The human endometrial explant culture model will be useful for future studies of the effects of dioxin-like compounds on human endometrium in relationship to cycle phase and hormonal exposure.

Aryl Hydrocarbon Hydroxylases↗
PubMed2001

The Ca(2+) status of the endoplasmic reticulum is altered by induction of calreticulin expression in transgenic plants.

To investigate the endoplasmic reticulum (ER) Ca(2+) stores in plant cells, we generated tobacco (Nicotiana tabacum; NT1) suspension cells and Arabidopsis plants with altered levels of calreticulin (CRT), an ER-localized Ca(2+)-binding protein. NT1 cells and Arabidopsis plants were transformed with a maize (Zea mays) CRT gene in both sense and antisense orientations under the control of an Arabidopsis heat shock promoter. ER-enriched membrane fractions from NT1 cells were used to examine how altered expression of CRT affects Ca(2+) uptake and release. We found that a 2.5-fold increase in CRT led to a 2-fold increase in ATP-dependent (45)Ca(2+) accumulation in the ER-enriched fraction compared with heat-shocked wild-type controls. Furthermore, after treatment with the Ca(2+) ionophore ionomycin, ER microsomes from NT1 cells overproducing CRT showed a 2-fold increase in the amount of (45)Ca(2+) released, and a 2- to 3-fold increase in the amount of (45)Ca(2+) retained compared with wild type. These data indicate that altering the production of CRT affects the ER Ca(2+) pool. In addition, CRT transgenic Arabidopsis plants were used to determine if altered CRT levels had any physiological effects. We found that the level of CRT in heat shock-induced CRT transgenic plants correlated positively with the retention of chlorophyll when the plants were transferred from Ca(2+)-containing medium to Ca(2+)-depleted medium. Together these data are consistent with the hypothesis that increasing CRT in the ER increases the ER Ca(2+) stores and thereby enhances the survival of plants grown in low Ca(2+) medium.

Arabidopsis↗
PubMed2000

Methyl groups of thymine bases are important for nucleic acid recognition by DtxR.

The expression of diphtheria toxin is controlled by the diphtheria toxin repressor (DtxR). Under conditions of high iron concentration, DtxR binds the tox operator to inhibit transcription. To study how DNA binding specificity is achieved by this repressor, we solved the crystal structure of the nickel(II) activated DtxR(C102D) mutant complexed with a 43mer DNA duplex containing the DtxR consensus binding sequence. Structural analysis of this complex and comparison with a previously determined DtxR(C102D)-Ni(II)-tox operator ternary complex revealed unusual van der Waals interactions between Ser37/Pro39 of the repressor helix-turn-helix (HTH) motif and the methyl groups of specific thymine bases in the consensus binding sequence. Gel mobility shift assays utilizing deoxyuridine modified duplex DNA probes proved the importance of these interactions: the four methyl groups shown to interact with Ser37/Pro39 in the crystal structure contribute a total of 3.4 kcal/mol to binding energy. Thus, in addition to making base-specific hydrogen-bonding interactions to the DNA through its Gln43 residue, DtxR also recognizes methyl groups at certain positions in the DNA sequence with its Ser37 and Pro39 side chains, to achieve binding specificity toward its cognate operator sequences.

Amino Acid Sequence↗
PubMed2000

A comparative clinical trial of a compomer and a resin adhesive for orthodontic bonding.

The study aimed to compare the survival time and cariostatic potential of a compomer to that of a resin adhesive when used to bond stainless steel orthodontic brackets to labial segment teeth only. The effect of the patients' sex, age at the start of treatment and presenting malocclusion on bracket survival time was assessed also. Forty-five consecutive patients who attended for fixed appliance therapy were randomly selected. Four hundred twenty-six brackets were bonded (213 with compomer and 213 with resin adhesive) with a split mouth design; the right or left side allocation of compomer in either arch was alternated. Color transparencies of the maxillary incisors, mandibular incisors, or both, and transparencies of the canines, were taken before treatment. At the debond stage, the transparencies were projected (20x) and assessed by an experienced examiner, who used a caries index. The survival time distributions for brackets bonded with each bonding agent were not significantly different (P = .74, paired Prentice-Wilcoxon test; P = .75, Akritas test), with bracket failure rates of 17% and 20% recorded for compomer and resin adhesive, respectively. Neither the patients' sex (P = .85) nor malocclusion (P = .26) appear to affect significantly bracket survival, but patient age was identified as a useful prognostic indicator of bracket survival (P < .001). On average, there was more decalcification related to brackets bonded with resin adhesive than with compomer (P = .0075). Survival time distributions of brackets bonded with compomer or resin adhesive appear comparable, but decalcification was reduced significantly by bonding with compomer.

Adolescent↗
PubMed2000

Technical advance: stringent control of transgene expression in Arabidopsis thaliana using the Top10 promoter system.

We show that the tightly regulated tetracycline-sensitive Top10 promoter system (Weinmann et al. Plant J. 1994, 5, 559-569) is functional in Arabidopsis thaliana. A pure breeding A. thaliana line (JL-tTA/8) was generated which expressed a chimeric fusion of the tetracycline repressor and the activation domain of Herpes simplex virus (tTA), from a single transgenic locus. Plants from this line were crossed with transgenics carrying the ER-targeted green fluorescent protein coding sequence (mGFP5) under control of the Top10 promoter sequence. Progeny from this cross displayed ER-targeted GFP fluorescence throughout the plant, indicating that the tTA-Top10 promoter interaction was functional in A. thaliana. GFP expression was repressed by 100 ng ml-1 tetracycline, an order of magnitude lower than the concentration used previously to repress expression in Nicotiana tabacum. Moreover, the level of GFP expression was controlled by varying the concentration of tetracycline in the medium, allowing a titred regulation of transgenic activity that was previously unavailable in A. thaliana. The kinetics of GFP activity were determined following de-repression of the Top10:mGFP5 transgene, with a visible ER-targeted GFP signal appearing from 24 to 48 h after de-repression.

Arabidopsis↗
PubMed2000

St John's wort, a herbal antidepressant, activates the steroid X receptor.

St John's wort (SJW), an extract of the medicinal plant Hypericum perforatum, is widely used as a herbal antidepressant. Recently, this agent has been found to adversely affect the metabolism of various coadministered drugs. Steroid X receptor (SXR), an orphan nuclear receptor, induces hepatic cytochrome P450 gene expression in response to diverse endogenous steroids, xenobiotics and drugs. Here, we report that, when coexpressed with SXR, a reporter construct derived from the cytochrome P450 3A promoter is activated by St John's wort. A GAL4-SXR ligand binding domain (LBD) fusion mediates concentration-dependent transactivation by SJW, whereas a mutant GAL4-SXR fusion, containing substitutions in key residues in a transactivation domain, is inactive. SJW recruits steroid receptor coactivator-1 to SXR in a two-hybrid assay and competes with radiolabelled ligand in binding studies, suggesting it interacts directly with the receptor LBD. Of two constituents of SJW, we find that hyperforin, but not hypericin, mediates both transactivation and coactivator recruitment by SXR. Our observations suggest that SXR activation by St John's wort mediates its adverse interaction with drugs metabolised via the CYP 3A pathway. Future development of SJW derivatives lacking SXR activation, may enable its antidepressant and drug-metabolising properties to be dissociated.

Animals↗
PubMed2000

Providing care to patients with pancreatic cancer: a retrospective chart review.

Pancreatic cancer may be considered rare, yet in Canada it is the fourth leading cause of death by cancer in the elderly. This study was conducted in a large tertiary centre to determine the symptoms experienced by patients and the response by health professionals in providing supportive care. This paper reports the results of a retrospective review of health records from patients diagnosed with pancreatic cancer (n = 99). Results indicate that pain, nausea, vomiting, and anorexia were frequently reported. There was a lack of consistency in the documentation of nursing care and little evidence of an organized, planned approach for care delivery. The role of the interdisciplinary health care team and its members in managing this devastating disease and its impact on patient quality of life was difficult to ascertain. The development of an integrated approach to the care of patients with pancreatic cancer is presented.

Aged↗