PubMed Health⌕ Search

Biomedical subjects

J M Delaney

Publications and source records attributed to J M Delaney.

13 recordsLinked to original sources
PubMed1999

Folding and purification of a recombinantly expressed interferon regulatory factor, IRF-4.

Interferon regulatory factor 4 (IRF-4), an intracellular, multidomain protein, is a member of the interferon regulatory factor family and a lymphoid-specific transcription factor that can form a ternary complex with DNA and the transcription factor PU.1. Recombinant human IRF-4 was expressed in Escherichia coli and purified from the soluble cell extract and the insoluble inclusion bodies. The inclusion bodies were solubilized with guanidinium-hydrochloride and sequentially buffer exchanged into urea- and then NaCl-containing solutions. This two-step process for the removal of the denaturants was the critical step to allow for the correct folding of IRF-4. Following purification through immobilized metal affinity, hydrophobic interaction, and gel permeation chromatographies, the renatured protein was shown to be structurally and physically equivalent to a sample of IRF-4 produced in the soluble fraction of E. coli cells. This was confirmed by near and far UV circular dichroism analysis, including thermal stability analysis. The purified IRF-4 was also shown to be capable of binding DNA in a PU.1-dependent manner by electrophoretic mobility shift analysis. The protein folding and purification methods are suitable for producing large quantities of full-length IRF-4.

DNA-Binding Proteins↗
PubMed1995

Toxicity of microcystin-LR, isolated from Microcystis aeruginosa, against various insect species.

Microcystin-LR (MC-LR), isolated from the cyanobacterium Microcystis aeruginosa Kuetzing emend. Elenkin strain CCAP 1450/4 was tested for biological activity against four species of insect and the invertebrate Artemia salina. The efficacy of pesticidal activity was compared with various insecticides. The 24 hr LD50 value for third instar diamond-backed moth, Plutella xylostella, on ingestion from a treated leaf surface was 1.0 micrograms cm2, compared with a 72 hr LD50 value for rotenone of 2.0 micrograms cm-2. The 24 hr LD50 values of MC-LR and malathion on intrathoracic injection into adult house flies (Musca domestica) were 0.5 and 3.7 mg kg-1, respectively. MC-LR had no effect on M. domestica when applied topically at dosages up to 32 mg kg-1. MC-LR and malathion gave 24 hr LD50 values of 4.7 and 13.1 mg kg-1, respectively when injected into third instar cotton leafworm (Spodoptera littoralis). In fourth instar cabbage white butterfly larvae (Pieris brassicae) MC-LR injected gave 24 and 48 hr LD50 values of 3.9 and 1.9 mg kg-1, respectively, whilst the 24 and 48 hr LD50 values for carbofuran were 0.4 and 0.3 mg kg-1, respectively. An immersion bioassay with 1-day-old brine shrimp larvae (Artemia salina) gave 24 hr LD50 values of 3.8 micrograms ml-1 for MC-LR and 1.8 micrograms ml-1 for carbofuran. MC-LR has appreciable insect toxicity, comparable to the three insecticides tested. The toxin look 24-48 hr to exert its full lethal effect in insects, much longer than the 1-3 hr it takes in mammals. The potential use of MC-LR as an insecticide is discussed.

Amino Acid Sequence↗
PubMed1993

Molecular characterization of the Escherichia coli htrD gene: cloning, sequence, regulation, and involvement with cytochrome d oxidase.

The Escherichia coli htrD gene was originally isolated during a search for new genes required for growth at high temperature. Insertional inactivation of htrD leads to a pleiotropic phenotype characterized by temperature-sensitive growth in rich medium, H2O2 sensitivity, and sensitivity to cysteine. The htrD gene was cloned and sequenced, and an htrD::mini-Tn10 insertion mutation was mapped within this gene. The htrD gene was shown to encode a protein of approximately 17.5 kDa. Expression of the htrD gene was examined by using an phi (htrD-lacZ) operon fusion. It was found that htrD is not temperature regulated and therefore is not a heat shock gene. Further study revealed that htrD expression is increased under aerobic growth conditions. Conversely, under anaerobic growth conditions, htrD expression is decreased. In addition, a mutation within the nearby cydD gene was found to drastically reduce htrD expression under all conditions tested. These results indicate that htrD is somehow involved in aerobic respiration and that the cydD gene product is necessary for htrD gene expression. In agreement with this conclusion, htrD mutant bacteria are unable to oxidize the cytochrome d-specific electron donor N,N,N',N'-tetramethyl-p-phenylenediamine.

ATP-Binding Cassette Transporters↗
PubMed1992

arc-dependent thermal regulation and extragenic suppression of the Escherichia coli cytochrome d operon.

In a screen for Escherichia coli genes whose products are required for high-temperature growth, we identified and characterized a mini-Tn10 insertion that allows the formation of wild-type-size colonies at 30 degrees C but results in microcolony formation at 36 degrees C and above (Ts- phenotype). Mapping, molecular cloning, and DNA sequencing analyses showed that the mini-Tn10 insertion resides in the cydB gene, the distal gene of the cydAB operon (cytochrome d). The Ts- growth phenotype was also shown to be associated with previously described cyd alleles. In addition, all cyd mutants were found to be extremely sensitive to hydrogen peroxide. Northern (RNA) blot analysis showed that cyd-specific mRNA levels accumulate following a shift to high temperature. Interestingly, this heat shock induction of the cyd operon was not affected in an rpoH delta background but was totally absent in an arcA or arcB mutant background. Extragenic suppressors of the Cyd Ts- phenotype are found at approximately 10(-3). Two extragenic suppressors were shown to be null alleles in either arcA or arcB. One interpretation of our results is that in the absence of ArcA or ArcB, which are required for the repression of the cyo operon (cytochrome o), elevated levels of Cyo are produced, thus compensating for the missing cytochrome d function. Consistent with this interpretation, the presence of the cyo gene on a multicopy plasmid suppressed the Ts- and hydrogen peroxide-sensitive phenotypes of cyd mutants.

Bacterial Outer Membrane Proteins↗
PubMed1992

Isolation and characterization of the Escherichia coli htrD gene, whose product is required for growth at high temperatures.

Those genes in Escherichia coli defined by mutations which result in an inability to grow at high temperatures are designated htr, indicating a high temperature requirement. A new htr mutant of E. coli was isolated and characterized and is designated htrD. The htrD gene has been mapped to 19.3 min on the E. coli chromosome. Insertional inactivation of htrD with a mini-Tn10 element resulted in a pleiotropic phenotype characterized by a severe inhibition of growth at 42 degrees C and decreased survival at 50 degrees C in rich media. Furthermore, htrD cells were sensitive to H2O2. Growth rate analysis revealed that htrD cells grow very slowly in minimal media supplemented with amino acids. This inhibitory effect has been traced to the presence of cysteine in the growth medium. Further studies indicated that the rate of cysteine transport is higher in htrD cells relative to the wild type. All of these results, taken together, indicate that the htrD gene product may be required for proper regulation of intracellular cysteine levels and that an increased rate of cysteine transport greatly affects the growth characteristics of E. coli.

Bacterial Proteins↗
PubMed1990

A cya deletion mutant of Escherichia coli develops thermotolerance but does not exhibit a heat-shock response.

An adenyl cyclase deletion mutant (cya) of E. coli failed to exhibit a heat-shock response even after 30 min at 42 degrees C. Under these conditions, heat-shock protein synthesis was induced by 10 min in the wild-type strain. These results suggest that synthesis of heat-shock proteins in E. coli requires the cya gene. This hypothesis is supported by the finding that a presumptive cyclic AMP receptor protein (CRP) binding site exists within the promoter region of the E. coli htpR gene. In spite of the absence of heat-shock protein synthesis, when treated at 50 degrees C, the cya mutant is relatively more heat resistant than wild type. Furthermore, when heat shocked at 42 degrees C prior to exposure at 50 degrees C, the cya mutant developed thermotolerance. These results suggest that heat-shock protein synthesis is not essential for development of thermotolerance in E. coli.

Adenylyl Cyclases↗
PubMed1990

Requirement of the Escherichia coli dnaK gene for thermotolerance and protection against H2O2.

Thermotolerance in Escherichia coli is induced by exposing cells to a brief heat shock (42 degrees C for 15 min). This results in resistance to the lethal effect of exposure to a higher temperature (50 degrees C). Mutants defective in the recA, uvrA and xthA genes are more sensitive to heat than the wild-type. However, after development of thermotolerance these mutants are like the wild-type in their heat sensitivity. This suggests that thermotolerance is an inducible response capable of protecting cells from the lethal effects of heat, independently of recA, uvrA and xthA. Thermotolerance does not develop in a dnaK mutant. In addition, the dnaK mutant is sensitive to heat and H2O2, but is resistant to UV irradiation. This implies that the E. coli heat-shock response includes a mechanism that protects cells from heat and H2O2, but not from UV.

Chromosome Deletion↗
PubMed1990

A grpE mutant of Escherichia coli is more resistant to heat than the wild-type.

The grpE gene of Escherichia coli is essential for bacteriophage lambda DNA replication and is also necessary for host RNA and DNA synthesis at high temperature. A grpE mutant of E. coli was found to be substantially more resistant to 50 degrees C heat treatment than the wild-type. Upon receiving a 42 degrees C heat shock for 15 min, both the wild-type and the grpE mutant became more resistant to heat (i.e. they became thermotolerant). A grpE+ revertant behaved similarly to the wild-type in that it was more sensitive to heat than grpE cells. In addition, grpE cells had the same H2O2 and UV sensitivity as the wild-type. This implies that the conditions for which a grpE mutation is beneficial are unique to heat exposure and are not caused by H2O2 or UV exposure. Furthermore, synthesis of heat-shock proteins occurred sooner in the grpE mutant than in the wild-type, indicating that the grpE gene of E. coli may influence the regulation of the heat-shock response.

Bacterial Proteins↗
PubMed1978

An inquiry into the sterilization of dental handpieces relative to transmission of hepatitis B virus.

The transmission of the hepatitis B virus has been implicated in the dental office. The dental profession should be keenly aware of aseptic clinical techniques and effective sterilization procedures. Some dental handpieces can be damaged by conventional sterilization procedures. Alternative procedures are discussed. A review of currently available handpieces and their appropriate sterilization procedures is presented.

Dental Instruments↗
PubMed1973

Spiral plate method for bacterial determination.

A method is described for determining the number of bacteria in a solution by the use of a machine which deposits a known volume of sample on a rotating agar plate in an ever decreasing amount in the form of an Archimedes spiral. After the sample is incubated, different colony densities are apparent on the surface of the plate. A modified counting grid is described which relates area of the plate of volume of sample. By counting an appropriate area of the plate, the number of bacteria in the sample is estimated. This method was compared to the pour plate procedure with the use of pure and mixed cultures in water and milk. The results did not demonstrate a significant difference in variance between duplicates at the alpha = 0.01 level when concentrations of 600 to 12 x 10(5) bacteria per ml were used, but the spiral plate method gave counts that were higher than counts obtained by the pour plate method. The time and materials required for this method are substantially less than those required for the conventional aerobic pour plate procedure.

Agar↗