PubMed Health⌕ Search

Biomedical subjects

J M Sanger

Publications and source records attributed to J M Sanger.

At least 73 records · Page 4Linked to original sources
PubMed1986

Observations of microfilament bundles in living cells microinjected with fluorescently labelled contractile proteins.

Fluorescently labelled contractile proteins (alpha-actinin and filamin) were used to study the dynamic nature of three types of microfilament bundles: myofibrils, stress fibres and polygonal networks. Cultured muscle and non-muscle cells that were microinjected with fluorescent alpha-actinin rapidly incorporated the labelled protein into Z-bands, stress fibre densities and the polygonal foci. Living, injected cells were then observed for varying periods of time, and changes in orientation and periodicity of the myofibrils, stress fibres and polygonal networks were recorded. Permeabilized cells were also reacted with fluorescently labelled proteins and with contractile protein antibodies in order to analyse further the changes taking place in the myofibrils and stress fibres. In both living cardiac myocytes and living skeletal muscle myotubes, contractile myofibrils were present in the same cell with non-contractile nascent myofibrils. The periodicities of small Z-bodies in the nascent non-contractile myofibrils were shorter than the Z-band spacings in the contractile myofibrils, yet both types of myofibrils contained muscle myosin. Over a period of 24 h, a nascent myofibril in a living, microinjected myotube was observed to grow from Z-body spacings of 0.9-1.3 micron to full sarcomere spacings (2.3 microns). During the same time, nascent myofibrils appeared de novo and Z-band alignment became more ordered in the fully formed myofibrils. Stress fibres were not observed to undergo the predictable type of growth seen in myofibrils, but stress fibre periodicities did change in some fibres; some shortened while others lengthened. The orientation of fibres shifted in cytoplasm of both mobile cells and stationary cells. Attachment plaques and foci also changed position and in some cases subdivided and/or disappeared. Models of stress fibres and polygonal networks are presented that suggest that the changes in the periodicities of the dense bodies in stress fibres and the distances between polygonal foci are related to the movement of the interdigitating actin and myosin filaments.

Actin Cytoskeleton↗
PubMed1985

Midbody sealing after cytokinesis in embryos of the sea urchin Arabacia punctulata.

Cytokinesis consists of a contractile phase followed by sealing of the connecting midbody to form two separated cells. To determine how soon the midbody sealed after cleavage furrow contraction, the fluorescent dye Lucifer Yellow CH(457.3 M.W.) was microinjected into cells at various intervals after cleavage had begun. Mitotic PtK2 cells were recorded with video-microscopy so that daughter cells in the epithelial sheet could be identified for several hours after cell division. One daughter cell of each pair followed was microinjected to determine whether the dye diffused into the other daughter cell. For intervals up to four hours after the beginning of cytokinesis, diffusion took place between daughter cells. After this time the dye did not spread between daughter cells. In sea urchin blastomeres of the first, second and third divisions, Lucifer Yellow passed between daughter blastomeres only during the first 15 min after cytokinesis. If one cell of a two-cell, four-cell or eight-cell embryo was microinjected more than 15 min after the last cleavage, the dye remained in the injected cell and was distributed to all progeny of that cell, resulting in blastulae that were eigher one-half, one-quarter or one-eighth fluorescent, respectively. Thus, although cleavage furrow contraction takes approximately the same amount of time in sea urchin blastomeres and PtK2 cells, the time of midbody sealing differs dramatically in the two cell types. Our results also indicate the importance of knowing the mitotic history of cells when injecting dyes into interphase cells for the purpose of detecting gap junctions.

Animals↗
PubMed1984

Formation of myofibrils in spreading chick cardiac myocytes.

Cardiac myocytes were isolated from 5-6-day-old chick embryos and allowed to spread in culture. The distribution of alpha-actinin in the cells was followed for five days in culture by exposing permeabilized cells to rhodamine-labeled alpha-actinin and also by injecting the labeled alpha-actinin into living myocytes. In addition to labeling the Z bands of sarcomeres, the added alpha-actinin also labeled small particles that were usually arranged periodically in linear arrays with a spacing between particles of 0.3-2.0 micron. Actin was localized between the particles of alpha-actinin by means of fluorescein-labeled heavy meromyosin. The punctate localization of alpha-actinin was prominent in pseudopods, behind ruffles, and at the periphery of spreading cells. Long rows of particles of alpha-actinin were often parallel to one another with the alpha-actinin particles in register. These linear arrays appeared to merge laterally to form strands with broader concentrations of alpha-actinin. Other linear arrays were parallel to myofibrils in the cell and some extended outward from the ends of myofibrils. We conclude that during spreading of cardiac myocytes, myofibrils form at the cell periphery behind the extending margins of the cell, and that the aggregates of alpha-actinin found in these areas are nascent Z bands in the forming myofibrils.

Actinin↗
PubMed1984

Cell surface changes during mitosis and cytokinesis of epithelial cells.

PtK2 cells were studied with scanning electron microscopy to record changes on the cell surface during mitosis and cytokinesis. During prophase, prometaphase and metaphase, the cells remain very flat with few microvilli on their surfaces. In anaphase cells, there is a marked increase in the number of microvilli, most of which are clumped over the separating chromosomes and polar regions of the mitotic spindle leaving the surface of the interzonal spindle region relatively smooth. Microvilli appear over the interzonal spindle region in telophase and the cells also increase in height. At the beginning of cleavage, the distribution of microvilli is roughly uniform over the surface but it becomes asymmetric at the completion of cleavage when the daughter cells begin to spread. At this time most microvilli are over the daughter nuclei and the surfaces that border the former cleavage furrow. The regions of the daughter cells distal to the furrow are the first to spread and their surfaces have very few microvilli. When chromosome movement is inhibited by either Nocodazole or Taxol, microvilli formation is inhibited on the arrested cells. Nevertheless cell rounding still takes place in the normal time period. It is concluded from these observations that the signal for the onset of chromosome movement in anaphase is accompanied by a signal for the formation of microvilli. It is suggested that there is also a separate signal for the cell-rounding event in mitosis and that microvilli do not play a role in this contractile process.

Animals↗
PubMed1984

Analysis of myofibrillar structure and assembly using fluorescently labeled contractile proteins.

To study how contractile proteins become organized into sarcomeric units in striated muscle, we have exposed glycerinated myofibrils to fluorescently labeled actin, alpha-actinin, and tropomyosin. In this in vitro system, alpha-actinin bound to the Z-bands and the binding could not be saturated by prior addition of excess unlabeled alpha-actinin. Conditions known to prevent self-association of alpha-actinin, however, blocked the binding of fluorescently labeled alpha-actinin to Z-bands. When tropomyosin was removed from the myofibrils, alpha-actinin then added to the thin filaments as well as the Z-bands. Actin bound in a doublet pattern to the regions of the myosin filaments where there were free cross-bridges i.e., in that part of the A-band free of interdigitating native thin filaments but not in the center of the A-band which lacks cross-bridges. In the presence of 0.1-0.2 mM ATP, no actin binding occurred. When unlabeled alpha-actinin was added first to myofibrils and then labeled actin was added fluorescence occurred not in a doublet pattern but along the entire length of the myofibril. Tropomyosin did not bind to myofibrils unless the existing tropomyosin was first removed, in which case it added to the thin filaments in the l-band. Tropomyosin did bind, however, to the exogenously added tropomyosin-free actin that localizes as a doublet in the A-band. These results indicate that the alpha-actinin present in Z-bands of myofibrils is fully complexed with actin, but can bind exogenous alpha-actinin and, if actin is added subsequently, the exogenous alpha-actinin in the Z-band will bind the newly formed fluorescent actin filaments. Myofibrillar actin filaments did not increase in length when G-actin was present under polymerizing conditions, nor did they bind any added tropomyosin. These observations are discussed in terms of the structure and in vivo assembly of myofibrils.

Actinin↗
PubMed1984

Interaction of fluorescently-labeled contractile proteins with the cytoskeleton in cell models.

To determine if a living cell is necessary for the incorporation of actin, alpha-actinin, and tropomyosin into the cytoskeleton, we have exposed cell models to fluorescently labeled contractile proteins. In this in vitro system, lissamine rhodamine-labeled actin bound to attachment plaques, ruffles, cleavage furrows and stress fibers, and the binding could not be blocked by prior exposure to unlabeled actin. Fluorescently labeled alpha-actinin also bound to ruffles, attachment plaques, cleavage furrows, and stress fibers. The periodicity of fluorescent alpha-actinin along stress fibers was wider in gerbil fibroma cells than it was in PtK2 cells. The fluorescent alpha-actinin binding in cell models could not be blocked by the prior addition of unlabeled alpha-actinin suggesting that alpha-actinin was binding to itself. While there was only slight binding of fluorescent tropomyosin to the cytoskeleton of interphase cells, there was stronger binding in furrow regions of models of dividing cells. The binding of fluorescently labeled tropomyosin could be blocked by prior exposure of the cell models to unlabeled tropomyosin. If unlabeled actin was permitted to polymerize in the stress fibers in cell models, fluorescently labeled tropomyosin stained the fibers. In contrast to the labeled contractile proteins, fluorescently labeled ovalbumin and BSA did not stain any elements of the cytoskeleton. Our results are discussed in terms of the structure and assembly of stress fibers and cleavage furrows.

Actinin↗
PubMed1983

Microinjection of Lucifer yellow CH into sea urchin eggs and embryos.

Eggs and embryos of Arbacia punctulata were microinjected with the fluorescent dye, Lucifer yellow CH, using a simple pressure injection system. When injected into eggs that were subsequently fertilized, the dye was distributed throughout all cells of the developing embryo. If one cell of a two-cell embryo was injected, dye did not diffuse into the uninjected blastomere. During subsequent development, all progeny of the injected cell contained dye resulting in an embryo that was half-fluorescent. Blue light irradiation of a two-cell embryo, one cell of which had been injected with Lucifer yellow, caused the injected blastomere to stop further divisions while the uninjected blastomere developed normally and was free of dye. These results indicate that the first two blastomeres of Arbacia embryos are not electrically coupled, nor up to the time of hatching, is there any coupling between cells in one half of the first cleavage plane and cells in the other half.

Animals↗
PubMed1983

Differences in the stress fibers between fibroblasts and epithelial cells.

In the stress fibers of two types of nonmuscle cells, epithelia (PtK2, bovine lens) and fibroblasts (Gerbil fibroma, WI-38, primary human) the spacing between sites of alpha-actinin localization differs by a factor of about 1.6 as determined by indirect immunofluorescence and ultrastructural localization with peroxidase-labeled antibody. Both methods reveal striations along the stress fibers with a center-to-center spacing in the range of 0.9 mum in epithelial cells and 1.5 mum in fibroblasts. Periodic densities spaced at comparable distances are seen in PtK2 and in gerbil fibroma cells when they are treated with tannic acid and examined in the electron microscope. In such cells, densities are found not only along stress fibers but also at cell-cell junctions, attachment plaques, and foci from which stress fibers radiate. These latter three sites all stain with alpha-actinin antibody on the light and electron microscope level. Stress fibers in the two cell types also vary in the periodicity produced by indirect immunofluorescence with tropomyosin antibodies. As is the case for alpha-actinin, the tropomyosin center-to-center banding is approximately 1.6 times as long in gerbil fibroma cells (1.7 mum) as it is in PtK2 cells (1.0 mum). These results suggest that the densities seen in the electron microscope are sites of alpha-actinin localization and that the proteins in stress fibers have an arrangement similar to that in striated muscle. We propose a sarcomeric model of stress fiber structure based on light and electron microscopic findings.

Actinin↗
PubMed1983

Differential response of three types of actin filament bundles to depletion of cellular ATP levels.

The effect of low levels of ATP on actin filament bundles in PtK2 cells was investigated by using 2-deoxyglucose, together with either sodium cyanide, sodium azide, or 2,4-dinitrophenol. Three actin filament systems were examined: stress fibers, cleavage rings, and dimethyl-sulfoxide (DMSO)-induced actin bundles in the nucleus. Of the three, only stress fibers disassembled when the ATP production was inhibited. The disassembly progressed slowly with the cells losing all stress fibers after about 90 min, but remaining in flat interconnected sheets. Mitotic cells that had progressed as far as metaphase when inhibitors were added, assembled cleavage rings. The process of cytokinesis took place in these cells but at a rate 5 to 10 times slower than normal, and disassembly of the cleavage ring was inhibited after the completion of cytokinesis. DMSO-induced nuclear actin bundles did not disassemble in cells depleted of ATP even when DMSO was eliminated from the medium. The peripheral aggregates of contractile proteins present in these cells became redistributed, however, and the cells flattened in the low ATP environment when DMSO was removed. Nuclear actin bundles did not form in DMSO-treated cells if the ATP inhibitors were present for as little as 5 min prior to DMSO exposure. Thus, the three types of actin filament bundles are affected in different ways by low intracellular levels of ATP. Stress fibers are most sensitive and cleavage rings, the least.

Actins↗
PubMed1980

Dissolution of cytoplasmic actin bundles and the induction of nuclear actin bundles by dimethyl sulfoxide.

Within 30 minutes of exposure to medium containing 10% dimethyl sulfoxide, PtK2 cells begin to round up and lose their cytoplasmic actin bundles. At the same time, bundles of actin filaments appear in the nuclei of the cells. One to 2 hours after the dimethyl sulfoxide is removed from the medium, the cells revert to their flattened shape, losing the nuclear actin bundles and regaining the cytoplasmic bundles.

Actins↗
PubMed1980

Surface and shape changes during cell division.

Rat kangaroo cells (PtK2) were studied with scanning and transmission electron microscopy in order to correlate shape changes during the cell cycle with the presence or absence of microvilli andd stress fibers. During interphase, bundles of actin are prominent in the cytoplasm, and microvilli are localized over and around the centrally positioned nucleus. As mitosis begins, the interphase bundles of actin and the microvilli disappear, but the mitotic cells maintain a flattened shape. At metaphase the cell is still so flat that both the chromosomes and spindle apparatus are visible through the intact cell membrane. Microvilli reappear in late anaphase above the chromosomes and poles. Before cleavage begins, microvilli increase in number until they cover the apical surface of the cell. At the same time, the cell increases in height so that the chromosomes and mitotic apparatus can no longer be detected through the cell membrane. During cleavage, microvilli continue to cover the cell in a uniform manner but become greatly diminished in number after cytokinesis is completed and the cells flatten and enter interphase. It is suggested that the microvilli organize a network of actin filaments which interact with cortical myosin to produce the cell rounding porior to cleavage.

Anaphase↗
PubMed1980

Reversible translocation of cytoplasmic actin into the nucleus caused by dimethyl sulfoxide.

The addition of 10% dimethyl sulfoxide (Me2SO) to PtK2 and WI-38 cells caused stress fibers to disappear from the cytoplasm and numerous elongated inclusions to appear in the nucleus. When Me2SO was removed, the stress fibers reformed and the nuclear inclusions disappeared. These nuclear inclusions reacted with fluorescent heavy meromyosin, phalloidin, and actin antibody. In the electron microscope, needle-like structures were seen to be composed of wavy filaments that bound heavy meromyosin. Antibodies against other components of stress fibers--tropomyosin, alpha-actinin, and myosin--did not react with the inclusions. When fluorescently labeled actin was microinjected into living PtK2 and WI-38 cells, the fluorescent actin was incorporated into stress fibers. Subsequent exposure of the same cells to Me2SO led to breakdown of the fluorescent stress fibers and the appearance of fluorescent inclusions in the nucleus. Removal of Me2SO caused reversion to the normal interphase structure. These results indicate that under the influence of Me2SO, dissolution of stress fiber releases actin in a form which allows it to diffuse into the nucleus where it then becomes organized into filamentous bundles.

Actins↗
PubMed1980

Banding and polarity of actin filaments in interphase and cleaving cells.

Heavy meromyosin (HMM) decoration of actin filaments was used to detect the polarity of microfilaments in interphase and cleaving rat kangaroo (PtK2) cells. Ethanol at -20 degrees C was used to make the cells permeable to HMM followed by tannic acid-glutaraldehyde fixation for electron microscopy. Uniform polarity of actin filaments was observed at cell junctions and central attachment plaques with the HMM arrowheads always pointing away from the junction or plaque. Stress fibers were banded in appearance with their component microfilaments exhibiting both parallel and antiparallel orientation with respect to one another. Identical banding of microfilament bundles was also seen in cleavage furrows with the same variation in filament polarity as found in stress fibers. Similarly banded fibers were not seen outside the cleavage furrow in mitotic cells. By the time that a mid-body was present, the actin filaments in the cleavage furrow were no longer in banded fibers. The alternating dark and light bands of both the stress fibers and cleavage furrow fibers are approximately equal in length, each measuring approximately 0.16 micrometer. Actin filaments were present in both bands, and individual decorated filaments could sometimes be traced through four band lengths. Undecorated filaments, 10 nm in diameter, could often be seen within the light bands. A model is proposed to explain the arrangement of filaments in stress fibers and cleavage furrows based on the striations observed with tannic acid and the polarity of the actin filaments.

Actins↗
PubMed1980

Intermediate filament aggregation: effect on cell topology, cell spreading and surface transport.

When chick fibroblasts are treated with cytochalasin-B and then transferred to medium containing colcemid, they become very flat and acquire corrugations on the apical cell surface. Bundles of intermediate filaments are found beneath the cell membrane in the troughs of the corrugations. When subcultured in colcemid, the cells retain the bundles of intermediate filaments and corrugations, and spread out both on untreated surfaces and on surfaces coated with gold particles. Gold particles are transported over the apical surface and phagocytosed by the cell. There is no accumulation of gold particles on the membrane under which the cables of intermediate filaments lie, and phagocytosed gold is excluded from the area occupied by the cables. These experiments indicate that a cell does not need microtubules and (a normal distribution of) intermediate filaments in order to spread, or to pick up, transport and phagocytose particulate material. The experimental aggregation of intermediate filaments does, however, alter the cell topology and the way in which particles are transported over the surface and ingested.

Animals↗
PubMed1975

Polymerization of sperm actin in the presence of cytochalasin-B.

The polymerization of globular actin to fibrous actin which occurs when sperm are activated, was not inhibited by cytochalasin-B. The acrosomal filament and its component actin filaments formed in the presence of cytochalasin-B; and once formed, the actin filaments did not depolymerize when exposed to cytochalasin-B.

Acrosome↗