Biomedical subjects

J M Teijón

Publications and source records attributed to J M Teijón.

At least 19 recordsLinked to original sources

PubMed2005

Structural and functional implications of the hexokinase-nickel interaction.

The interaction between nickel and yeast hexokinase was studied. The binding of nickel showed a positive cooperativity, and saturation was not reached. The nickel binding induced modifications in the secondary structure of the protein; thus, a lost of alpha helix and beta turns, as well as an increase of the random structure and beta sheet was observed. The monomer/dimmer equilibrium of the protein was modified in the presence of nickel, and the monomer state was mainly obtained at the highest nickel concentrations studied. These changes on the protein structure caused a decrease in the enzyme activity. According to kinetic studies, nickel caused a non-competitive inhibition when glucose was the variable substrate and a linear competitive inhibition when ATP was the variable substrate.

Adenosine Triphosphate↗

PubMed2005

5-Fluorouracil-loaded microspheres prepared by spray-drying poly(D,L-lactide) and poly(lactide-co-glycolide) polymers: characterization and drug release.

5-Fluorouracil (5-FU), a hydrosoluble anti-neoplastic drug, was encapsulated in microspheres of poly(D,L-lactide) (PLA) and poly(lactide-co-glycolide) (PLGA) polymers using the spray-drying technique, in order to obtain small size microspheres with a significant drug entrapment efficiency. Drug-loaded microspheres included between 47 +/- 11 and 67 +/- 12 microg 5-FU mg(-1) microspheres and the percentage of entrapment efficiency was between 52 +/- 12 and 74 +/- 13. Microspheres were of small size (average diameter: 0.9 +/- 0.4-1.4 +/- 0.8 microm microspheres without drug; 1.1 +/- 0.5-1.7 +/- 0.9 microm 5-FU-loaded microspheres) and their surface was smooth and slightly porous, some hollows or deformations were observed in microspheres prepared from polymers with larger Tg. A fractionation process of the raw polymer during the formation of microspheres was observed as an increase of the average molecular weight and also of Tg of the polymer of the microspheres. The presence of 5-FU did not modify the Tg values of the microspheres. Significant interactions between the drug and each one of the polymers did not take place and total release of the included drug was observed in all cases. The time needed for the total drug release (28-129 h) was in the order PLA > PLGA 75/25 > PLGA 50/50. A burst effect (17-20%) was observed during the first hour and then a period of constant release rate (3.52 +/- 0.82-1.46 +/- 0.26 microg 5-FU h(-1) per milligram of microspheres) up to 8 or 13 h, depending on the polymer, was obtained.

Antimetabolites, Antineoplastic↗

PubMed2004

Cytarabine release from comatrices of albumin microspheres in a poly(lactide-co-glycolide) film: in vitro and in vivo studies.

Cytarabine (ara-C) was included in albumin microspheres and these microspheres were immersed in a poly(lactide-co-glycolide) (PLGA) film to constitute a comatrix system to develop a prolonged form of release. Cytarabine-loaded albumin microspheres were synthesized by emulsion, and 25 or 50 mg of drug were included in the disperse phase. Thus, microspheres with 46+/-4 microg drug/mg microspheres and 50+/-5 microg drug/mg microspheres were obtained, which means a percentage of incorporation efficiency of 42+/-4% and 25+/-2%, respectively. These cytarabine-loaded microspheres were used to prepare PLGA-comatrices. Kinetic release studies indicated that total cytarabine release only takes place in the presence of protease, probably due to the fact that glutaraldehyde establishes covalent links with the amine side group of the drug and cross-links it with the protein matrix. A slower kinetic release of the drug was obtained from PLGA-comatrices, although only 80% of the included cytarabine was released on day 7. The comatrices were subcutaneously implanted in the back of rats and in both cases the ara-C administered dose was 36 mg of ara-C per kg of body weight. The drug was detected in plasma 10 days. The mean residence time (MRT) of the drug administered by these comatrices was 87-91 times larger when compared to the value obtained when the drug was administered in solution by intraperitoneal injection. The histological studies show that a degradative process of the comatrices takes place. The comatrices do not damage surrounding tissue; a normal regeneration of the implanted zone was observed.

Animals↗

PubMed2003

Transdermal application of bupivacaine-loaded poly(acrylamide(A)-co-monomethyl itaconate) hydrogels.

Bupivacaine, an amide local anaesthetic agent of long-acting and intense anaesthesia, was incorporated into poly(acrylamide(A)-co-monomethyl itaconate (MMI)) hydrogels. The swelling behaviour of two gel compositions, without drug, 75A/25MMI and 60A/40MMI, through rabbit ear skin, mounted on a modified Franz diffusion cell, was studied. Both gel compositions reach the equilibrium swelling degree (88.9+/-0.7 wt.% for 75A/25MMI and 92.5+/-0.1 wt.% for 60A/40MMI). The swelling kinetics was in accordance with the second Fick's Law; diffusion coefficients indicate faster swelling for gels with lower amount of monomethyl itaconic acid. The skin flux of bupivacaine solution through rabbit ear skin was 105+/-24 microg/cm(2)/h, the effective permeability coefficient was 26 x 10(-3)+/-9 x 10(-3)cm/h, and 77+/-15% of bupivacaine was permeated. Bupivacaine-loaded gels allow the drug was permeated through the skin. 47+/-4% and 36+/-3% of the drug amount included in 75A/25MMI and 60A/40MMI hydrogels, respectively, was permeated. The skin flux of the drug was between 90+/-5 and 16+/-7 microg/cm(2)/h depending on the amount of bupivacaine included in the gel and the gel composition. Skin flux increases with the drug load of the gels. Furthermore, as more MMI in the gel slower skin flux of the drug due to bupivacaine-gel interactions.

Acrylamides↗

PubMed2003

Sustained release of bupivacaine from devices based on chitosan.

Chitosan beads loaded with bupivacaine (16+/-3 microg of drug per milligram of beads) were prepared by cross-linking with glutaraldehyde. In vitro drug release at pH and temperature conditions similar to those of the biological systems were studied. Maximum release of bupivacaine was obtained between 100 and 120 h, depending on the presence of lysozyme in the release medium, since the enzyme facilitates the release process. A constant release rate of the drug, between 11 and 15 microg/h, was observed for 30 h. In order to prolong bupivacaine release, the drug-loaded chitosan beads were coated with a poly(DL-lactide-co-glycolide) film. The resulting device allows the drug to be released in a sustained form; a constant release rate between 28.5 and 29.5 microg/h was obtained for 3 days, and the maximum release of bupivacaine took place at day 9. The in vitro results indicate a possible application of these bupivacaine loaded chitosan systems as drug release devices with an analgesic action. Thus, they could be used in the treatment of dental pain in the buccal cavity, where drug release would be made easier by lysozyme of the saliva.

Bupivacaine↗

PubMed2003

Preparation of bupivacaine-loaded poly(epsilon-caprolactone) microspheres by spray drying: drug release studies and biocompatibility.

Poly(epsilon-caprolactone) microspheres containing bupivacaine were prepared by the spray-drying process. The average size of drug loaded microspheres was less than 3 microm in diameter, and the percentage of entrapment efficiency was 91 +/- 3%. In vitro drug release kinetic in phosphate buffer at 37 degrees C showed a hyperbolic profile, with a burst-effect during the first hour. Subcutaneous injection of bupivacaine-loaded microspheres in the back of rats caused an increase in drug concentration in plasma. Maximum bupivacaine concentration in plasma was 237 +/- 58 ng/ml at 105 h, and drug was detected in plasma for 16 days. The half-life time of the drug was increased by more than 125 times with regard to that of the drug administered in a solution by intraperitoneal injection. After 30 days of injection, a mass formed by microspheres surrounded by a thin fibrous capsule was observed. Small blood vessels and multinucleate foreign body giant cells with macrophagic function around microspheres were detected. After 60 days of injection a subcutaneous mass was also observed, which was formed of more degraded dispersed microspheres in conjunctive tissue, which had a normal structure. Thus, bupivacaine-loaded poly(epsilon-caprolactone) microspheres could be considered as a device to be used in the treatment of severe pain that is not responsive to opioids for example in cancer-related syndromes or in intractable herpetic neuralgia.

Anesthetics, Local↗

PubMed2001

Effect of cadmium acetate on the conformation of lysozyme: functional implications.

Structural variations of lysozyme as a consequence of its interaction with CdAc2, as well as the implications on the protein functionality have been studied. Variations in the conformation of the macromolecule are seen, however these changes are not reflected on the secondary structure. The interaction of the salt with the polypeptide chain is weak and thermodynamically unfavourable. Molecular aggregates (dimer forms) are observed at the highest salt concentrations. This interaction causes an inhibitory effect on lysozyme, the activity loss being 50% at the highest salt concentration studied. The inhibition is of mixed type with an uncompetitive component. Thus cadmium does not bind to the active site of the enzyme which is in accordance with the not very large activity loss observed. The substrate inhibition of lysozyme is favoured in the presence of the salt, so interaction with the macromolecule is at low affinity sites.

Acetates↗

PubMed2000

Chitosan microspheres in PLG films as devices for cytarabine release.

Cytarabine was included in chitosan microspheres and several of these microspheres were embedded in a poly(lactide-co-glycolide) (PLG) film to constitute a comatrix system, to develop a prolonged release form. Chitosan microspheres, in the range of 92+/-65 microm, having good spherical geometry and a smooth surface incorporating cytarabine, were prepared. The cytarabine amount included in chitosan microspheres was 43.7 microg of ara-C per milligram microsphere. The incorporation efficiency of the cytarabine in microspheres was 70.6%. Total cytarabine release from microspheres in vitro was detected at 48 h. Inclusion of cytarabine-loaded microspheres in poly(lactide-co-glycolide) film initiated a slower release of the drug and, in this way, the maximum of cytarabine released (80%) took place in vitro at 94.5 h. Comatrices, with 8.7 mg of cytarabine, signifying a dose of 34.5 microg/kg, were subcutaneously implanted in the back of rats. Maximum plasma cytarabine concentration was 18.5+/-1.5 microg/ml, 48 h after the device implantation and the drug was detected in plasma for 13 days. The histological studies show a slow degradative process. After 6 months of implantation, most of the microspheres of the matrix seemed to be intact, the comatrix appeared surrounded by conjunctive tissue and small blood vessels and nerve packets were detected in the periphery of the implant.

Animals↗

PubMed2000

Analysis of aluminum-yeast hexokinase interaction: modifications on protein structure and functionality.

The aluminum and yeast hexokinase interaction was studied. Structural changes were correlated with variations in protein functionality. Results show two different behaviors: At low metal concentrations preferential adsorption of metal (and water exclusion) induces aggregate formation. No significant changes in the protein structure occur, but there is a continuous loss of activity (from the first concentration). At large salt concentrations a monomerization process and a conformational change in the secondary structure as well as in the three-dimensional structure take place. This change reduces the percentage of alpha-helix conformation, gives thermal stability to the protein, and allows the exposure of some tryptophan residue and hydrophobic regions. The protein inhibition increases. Conformational change and monomerization may allow access of the metal to the substrate site, mainly the ATP site. The inhibition in any case is of mixed type with a competitive component.

Adenosine Triphosphate↗

PubMed1999

Bupivacaine-loaded comatrix formed by albumin microspheres included in a poly(lactide-co-glycolide) film: in vivo biocompatibility and drug release studies.

Bupivacaine-loaded comatrix, formed by bupivacaine-loaded microspheres included in a poly(lactide-co-glycolide) film, was assayed for the controlled release of the drug 'in vivo'. The comatrix, with 66.37 microg of bupivacaine, signifying a dose of 265.5 microg/kg, was subcutaneously implanted in the back of rats. Maximum plasma bupivacaine concentration was 147.6 +/- 5.0 ng/ml 95 h after the device implantation, and the drug was detected in plasma for 17 days. The half-life time of bupivacaine improves by more than 50 times with regard to that of the drug administered in a solution by intraperitoneal injection. After 15 days of implantation the comatrix was included in a thin fibrous capsule and degradation of the microspheres was observed. The histological studies show good biocompatibility of this comatrix. After 50 days the comatrix was degraded and its remains were almost indistinguishable from the surrounding tissue. Small number of microspheres was observed and they were surrounded by conjunctive tissue. Nerve packets and small blood vessels were also observed in the periphery of the implant.

Animals↗

PubMed1998

Poly(acrylamide-co-monoethyl itaconate) hydrogels as devices for cytarabine release in rats.

This study has tested the application of three different copolymeric poly(acrylamide-co-monoethyl itaconate; A/MEI) hydrogels, 90A/10MEI, 75A/25MEI and 60A/40MEI, on the release of cytarabine (ara-C). The drug was incorporated in gels by placing it in the polymerization feed mixture and discs loaded with 5-50 mg ara-C were obtained. The amount of swelling at equilibrium in saline solution (NaCl, 0.9% w/w) was between 78 and 82% w/w, depending on the composition of the copolymer. The diffusion studies followed Fick's second law. The diffusion coefficients for swelling of the gels were between 9.30 x 10(-11) m2 s(-1) and 37.42 x 10(-11) m2 s(-1); those for release of ara-C were between 3.42 x 10(-11) m2 s(-1) and 10.25 x 10(-11) m2 s(-1). The activation energies for swelling were in the range 16.60 +/- 2.59-21.85 +/- 1.78 kJ mol(-1); those for ara-C release were 28.13 +/- 3.1-29.7 +/- 4.6 kJ mo(-1). To determine the applicability of these copolymers, 75A/25MEI gel was subcutaneously implanted in rats and the plasma concentration of the drug was determined by high-performance liquid chromatography. The concentration of ara-C in plasma (range 17.67 +/- 5.68-10.76 +/- 2.15 microg mL(-1)) was maintained during the first stages (2-8 h) and no drug was detected after 32 h. This route of administration was compared with intraperitoneal injection of the drug. In conclusion, ara-C can be incorporated in hydrogels and released in a pharmacologically active form. The concentration of ara-C in plasma is maintained for long enough to improve therapeutic results.

Acrylamides↗

PubMed1997

Cytarabine trapping in poly(2-hydroxyethyl methacrylate) hydrogels: drug delivery studies.

The release of cytarabine (ara-c) from poly(2-hydroxyethyl methacrylate) hydrogels cross-linked with different amounts of ethyleneglycol dimethacrylate (EGDMA) has been studied. The drug (range 5-25 mg) was trapped in polymer discs by including it in the feed mixture of polymerization. The drug delivery was followed by HPLC. The release was in accordance with Fickian behaviour. Total release of ara-C was reached after between 3 and 7 days depending on the percentage of EGDMA in the gels. A constant release rate of ara-C from the hydrogels was obtained, the time depending on the degree of cross-linking of the gels: 22 h for gels with 0.5% EGDMA, 32 h for gels with 5% EGDMA and 42 h for gels with 7% EGDMA; the amount of ara-C released being 50%, 80% and 85%, respectively, of the drug load of the gel discs. An increase of the release rate with the disc load was observed for each sort of hydrogel. Neither during the loading of the gels nor right through the drug release was degradation of ara-C observed.

Chemistry, Pharmaceutical↗

PubMed1997

Controlled release of cytarabine from poly(2-hydroxyethyl methacrylate-co-N-vinyl-2-pyrrolidone) hydrogels.

Controlled release of cytarabine (ara-C) from poly(2-hydroxyethyl methacrylate-co-N-vinyl-2-pyrrolidone) [p(HEMA-co-VP)] hydrogels cross-linked with ethylene glycol dimethacrylate (EGDMA) is reported. Three compositions of copolymer, each one with a different cross-linking degree, have been studied: H50/VP50, H75/VP25, and H80/VP20. Ara-C (5-25 mg by disc) was trapped in the gels by including it in the polymerization feed mixture. The ara-C release time was between 1 day from H50/VP50/E0.5 discs and 16 days from H80/VP20/E15 discs. In all cases there is a time period for which the drug release rate is constant.

Antimetabolites, Antineoplastic↗

PubMed1996

Release of 5-fluorouracil from poly(acrylamide-co-monopropyl itaconate) hydrogels.

The aim of this work was to test the application of copolymeric poly(acrylamide-co-monopropyl itaconate) (A-MPI) hydrogels on the release of 5-fluorouracil (5-FU). The equilibrium degree of swelling in saline solution was 83 +/- 2%. 5-FU, as the sodium salt, was trapped in gels by placing it in the polymerization feed mixture. The diffusion coefficients for both swelling of the gels and the release of 5-FU were determined, in addition to the activation energies for both processes. To determine the applicability of these copolymers, A-MPI (75:25) gel was subcutaneously implanted in rats and the drug plasma concentration was determined by HPLC.

Acrylamide↗

PubMed1996

5-Fluorouracil release from copolymeric hydrogels of itaconic acid monoester. I. Acrylamide-co-monomethyl itaconate.

The aim of this work was to test the application of new copolymeric poly (acrylamide-co-monomethyl itaconate) (A/MMI) hydrogels to 5-fluorouracil (5-FU) release. Three different compositions of copolymers have been studied, 90A:10MMI 75A:25MMI and 60A:40MMI. The equilibrium swelling degree in saline solution was between 76 and 80% depending on the copolymer composition. 5-FU, as the sodium salt, was trapped in the gels by including it in the feed mixture of polymerization. The swelling kinetics of the hydrogels in saline solution were studied at four temperatures, and the diffusion coefficient and the activation energy of the process were obtained. The 5-FU release as a function of temperature and disc load was studied; the diffusion coefficient and the activation energy of the release process were also obtained. The diffusion studies follow Fick's second law.

Acrylamides↗

PubMed1995

Preferential interactions in the H2O/lysozyme/AlCl3 system.

The preferential interactions of lysozyme with solvent components is studied in aqueous solutions of AlCl3. The interaction parameter is negative at large salt concentrations, indicating that the interaction process of both salt and protein is thermodynamically favorable. The transfer free-energy parameter and the solubility data show that aluminum chloride is a salting-in agent for lysozyme. Moreover, these preferential interactions also are correlated with both protein solubility in the solvent medium and the influence of salt on the lysozyme structure. Viscometric and refractometric studies show that lysozyme can undergo a conformational change at 1 mM of salt, and spectrophotometric studies indicate a protein activity of approximately 75% at 10 mM of salt. Therefore, neither the interaction of AlCl3 with the lysozyme nor the conformational change undergone directly affect the catalytic amino acid residues of the active site.

Adsorption↗

PubMed1994

Influence of degree of crosslinking on 5-fluorouracil release from poly(2-hydroxyethyl methacrylate) hydrogels.

Controlled release of 5-fluorouracil (5-FU) from poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogels with three different degrees of crosslinking is reported. The swelling kinetic of PHEMA hydrogels in water was studied at different disc thicknesses and temperatures, and the diffusion coefficient and activation energy of the process were obtained. The gels were loaded with 5-FU by immersing them in concentrated aqueous solutions of the drug. The 5-FU release was studied as a function of temperature, disc thickness, disc load and degree of crosslinking of the gels; the diffusion coefficient and activation energy of the release process were also obtained.

Chemistry, Pharmaceutical↗

PubMed1994

Anticancer drug, ara-C, release from pHEMA hydrogels.

This study investigates the controlled release of cytarabine (ara-C), an anticancer drug, from a polymeric matrix of lightly cross-linked poly(2-hydroxyethyl methacrylate) (pHEMA). The swelling of pHEMA discs in water was analysed as a function of temperature and thickness of xerogel discs. The fractional swelling was linear in (time)1/2 for short time periods. Drug release kinetics were examined as a function of temperature, initial drug load and thickness of pHEMA discs. The fraction of available drug release was also linear in (time)1/2 during the initial stages. These studies allow for the determination of diffusion coefficients for both the transport of water into the hydrogel and ara-C release from the polymer.

Biocompatible Materials↗