PubMed Health⌕ Search

Biomedical subjects

J Mitchell Guss

Publications and source records attributed to J Mitchell Guss.

At least 19 recordsLinked to original sources

A C-terminal disulfide bond in the copper-containing amine oxidase from pea seedlings violates the twofold symmetry of the molecular dimer.

The structure of a newly crystallized form of the copper-dependent amine oxidase from pea seedlings has been refined at a resolution of 2.2 A to a final R factor of 0.181. The structure (form II) was originally discovered during a study of xenon binding to copper-dependent amine oxidases as a probe for dioxygen-binding sites [Duff et al. (2004), J. Mol. Biol. 344, 599-607]. The form II crystals belong to space group P2(1), with two dimers in the asymmetric unit. The overall structure is very similar to the crystals of form I in space group P2(1)2(1)2(1) with a dimer in the asymmetric unit [Kumar et al. (1996), Structure, 4, 943-955]. In form I the last three residues (644-647) observable in the two subunits were apparently splayed apart. It was noted that the absence of a disulfide bond between the Cys647 residues of the two subunits was inconsistent with chemical evidence for the absence of free sulfhydryl groups. In both of the crystallographically independent dimers of form II the two subunits are clearly joined by a disulfide bridge between the C-terminal cysteine residues. This is only possible if the two polypeptide chains in the dimer adopt different conformations near the C-terminus so that the twofold symmetry is lost. A proline residue (645) two residues before the cysteine has a cis conformation in one chain and a trans conformation in the other. As a result, the disulfide bond lies more than 5 A from the twofold axis. The loss of local twofold symmetry in form II can be explained by intermolecular contacts, which provide an asymmetric environment.

Amine Oxidase (Copper-Containing)↗

The copper-containing amine oxidase from Arthrobacter globiformis: refinement at 1.55 and 2.20 A resolution in two crystal forms.

Copper-containing amine oxidases are found in all the major kingdoms of life. They catalyse the oxidation of organic amines in the presence of molecular dioxygen to aldehydes and hydrogen peroxide. The catalytic centres contain a Cu atom and a topaquinone cofactor formed autocatalytically from a tyrosine residue in the presence of Cu and molecular oxygen. The structure of the Cu-containing amine oxidase from Arthrobacter globiformis, which was previously refined at 1.8 A resolution in space group C2 with unit-cell parameters a = 157.84, b = 63.24, c = 91.98 A, beta = 112.0 degrees [Wilce et al. (1997), Biochemistry, 36, 16116-16133], has been re-refined with newly recorded data at 1.55 A resolution. The structure has also been solved and refined at 2.2 A resolution in a new crystal form, space group C2, with unit-cell parameters a = 158.04, b = 64.06, c = 69.69 A, beta = 111.7 degrees.

Amine Oxidase (Copper-Containing)↗

Stabilization of a binary protein complex by intein-mediated cyclization.

The study of protein-protein interactions can be hampered by the instability of one or more of the protein complex components. In this study, we showed that intein-mediated cyclization can be used to engineer an artificial intramolecular cyclic protein complex between two interacting proteins: the largely unstable LIM-only protein 4 (LMO4) and an unstructured domain of LIM domain binding protein 1 (ldb1). The X-ray structure of the cyclic complex is identical to noncyclized versions of the complex. Chemical and thermal denaturation assays using intrinsic tryptophan fluorescence and dynamic light scattering were used to compare the relative stabilities of the cyclized complex, the intermolecular (or free) complex, and two linear versions of the intramolecular complex (in which the interacting domains of LMO4 and ldb1 were fused, via a flexible linker, in either orientation). In terms of resistance to denaturation, the cyclic complex is the most stable variant and the intermolecular complex is the least stable; however, the two linear intramolecular variants show significant differences in stability. These differences appear to be related to the relative contact order (the average distance in sequence between residues that make contacts within a structure) of key binding residues at the interface of the two proteins. Thus, the restriction of the more stable component of a complex may enhance stability to a greater extent than restraining less stable components.

Adaptor Proteins, Signal Transducing↗

The 1.23 Angstrom structure of Pichia pastoris lysyl oxidase reveals a lysine-lysine cross-link.

The structure of Pichia pastoris lysyl oxidase (PPLO) in a new crystal form has been refined at 1.23 Angstrom resolution. PPLO, a copper amine oxidase (CuAO) with a 2,4,5-trihydroxyphenylalanine quinone (TPQ) cofactor, differs from most other members of the CuAO enzyme family in having the ability to oxidize the side chain of lysine residues in a polypeptide. In the asymmetric unit of the crystals, the structure analysis has located residues 43-779 of the polypeptide chain, seven carbohydrate residues, the active-site Cu atom, an imidazole molecule bound at the active site, two buried Ca(2+) ions, five surface Mg(2+) ions, five surface Cl(-) ions and 1045 water molecules. The crystallographic residuals are R = 0.112 and R(free) = 0.146. The TPQ cofactor and several other active-site residues are poorly ordered, in contrast to the surrounding well ordered structure. A covalent cross-link is observed between two lysine residues, Lys778 and Lys66. The cross-link is likely to have been formed by the oxidation of Lys778 followed by a spontaneous reaction with Lys66. The link is modelled as dehydrolysinonorleucine.

Binding Sites↗

Kinetic and crystallographic analysis of mutant Escherichia coli aminopeptidase P: insights into substrate recognition and the mechanism of catalysis.

Aminopeptidase P (APPro) is a manganese-dependent enzyme that cleaves the N-terminal amino acid from polypeptides where the second residue is proline. APPro shares a similar fold, substrate specificity, and catalytic mechanism with methionine aminopeptidase and prolidase. To investigate the roles of conserved residues at the active site, seven mutant forms of APPro were characterized kinetically and structurally. Mutation of individual metal ligands selectively abolished binding of either or both Mn(II) atoms at the active site, and none of these metal-ligand mutants had detectable catalytic activity. Mutation of the conserved active site residues His243 and His361 revealed that both are required for catalysis. We propose that His243 stabilizes substrate binding through an interaction with the carbonyl oxygen of the requisite proline residue of a substrate and that His361 stabilizes substrate binding and the gem-diol catalytic intermediate. Sequence, structural, and kinetic analyses reveal that His350, conserved in APPro and prolidase but not in methionine aminopeptidase, forms part of a hydrophobic binding pocket that gives APPro its proline specificity. Further, peptides in which the required proline residue is replaced by N-methylalanine or alanine are cleaved by APPro, but they are extremely poor substrates due to a loss of interactions between the prolidyl ring of the substrate and the hydrophobic proline-binding pocket.

Aminopeptidases↗

Structural and functional implications of metal ion selection in aminopeptidase P, a metalloprotease with a dinuclear metal center.

The effect of metal substitution on the activity and structure of the aminopeptidase P (APPro) from Escherichia coli has been investigated. Measurements of activity in the presence of Mn2+, Mg2+, Zn2+, Na+, and Ca2+ show that significant activity is seen only in the Mn-bound form of the enzyme. The addition of Zn2+ to [MnMn(APPro)] is strongly inhibitory. Crystal structures of [MnMn(APPro)], [MgMg(APPro)], [ZnZn(APPro)], [ZnMg(APPro)], [Ca_(APPro)], [Na_(APPro)], and [apo(APPro)] were determined. The structures of [Ca_(APPro)] and [Na_(APPro)] have a single metal atom at their active site. Surprisingly, when a tripeptide substrate (ValProLeu) was soaked into [Na_(APPro)] crystals in the presence of 200 mM Mg2+, the structure had substrate, but no metal, bound at the active site. The structure of apo APPro complexed with ValProLeu shows that the N-terminal amino group of a substrate can be bound at the active site by carboxylate side chains that normally bind the second metal atom, providing a model for substrate binding in a single-metal active enzyme. Structures of [MnMn(APPro)] and [ZnZn(APPro)] complexes of ProLeu, a product inhibitor, in the presence of excess Zn reveal a third metal-binding site, formed by two conserved His residues and the dipeptide inhibitor. A Zn atom bound at such a site would stabilize product binding and enhance inhibition.

Aminopeptidases↗

Structures of two minor-groove-binding quinolinium quaternary salts complexed with d(CGCGAATTCGCG)(2) at 1.6 and 1.8 Angstrom resolution.

The structures of the complexes formed between two anticancer minor-groove-binding quinolinium quaternary salts and the dodecamer d(CGCGAATTCGCG)(2) have been refined to resolutions of 1.6 and 1.8 Angstrom. The complexes crystallized in space group P2(1)2(1)2(1) and the structures are isomorphous with previously solved dodecamer structures. The ligands both bind in the central AT region of the minor groove and although the crystallization conditions and structures of the ligands are very similar, they bind in opposing orientations. The structures are compared with two previously published structures of quinolinium quaternary salts, refined at 2.5 Angstrom resolution, complexed with d(CGCGAATTCGCG)(2) and an e(6)G-modified DNA.

Antineoplastic Agents↗

Reversible inhibition of copper amine oxidase activity by channel-blocking ruthenium(II) and rhenium(I) molecular wires.

Molecular wires comprising a Ru(II)- or Re(I)-complex head group, an aromatic tail group, and an alkane linker reversibly inhibit the activity of the copper amine oxidase from Arthrobacter globiformis (AGAO), with K(i) values between 6 muM and 37 nM. In the crystal structure of a Ru(II)-wire:AGAO conjugate, the wire occupies the AGAO active-site substrate access channel, the trihydroxyphenylalanine quinone cofactor is ordered in the "off-Cu" position with its reactive carbonyl oriented toward the inhibitor, and the "gate" residue, Tyr-296, is in the "open" position. Head groups, tail-group substituents, and linker lengths all influence wire-binding interactions with the enzyme.

Amine Oxidase (Copper-Containing)↗

Dihydroorotase from Escherichia coli: loop movement and cooperativity between subunits.

Escherichia coli dihydroorotase has been crystallized in the presence of the product, L-dihydroorotate (L-DHO), and the structure refined at 1.9A resolution. The structure confirms that previously reported (PDB entry 1J79), crystallized in the presence of the substrate N-carbamyl-D,L-aspartate (D, L-CA-asp), which had a dimer in the asymmetric unit, with one subunit having the substrate, L-CA-asp bound at the active site and the other having L-DHO. Importantly, no explanation for the unusual structure was given. Our results now show that a loop comprised of residues 105-115 has different conformations in the two subunits. In the case of the L-CA-asp-bound subunit, this loop reaches in toward the active site and makes hydrogen-bonding contact with the bound substrate molecule. For the L-DHO-bound subunit, the loop faces in the opposite direction and forms part of the surface of the protein. Analysis of the kinetics for conversion of L-DHO to L-CA-asp at low concentrations of L-DHO shows positive cooperativity with a Hill coefficient n=1.57(+/-0.13). Communication between subunits in the dimer may occur via cooperative conformational changes of the side-chains of a tripeptide from each subunit: Arg256-His257-Arg258, near the subunit interface.

Amino Acid Sequence↗

Crystal structures of recombinant human purple Acid phosphatase with and without an inhibitory conformation of the repression loop.

The crystal structure of human purple acid phosphatase recombinantly expressed in Escherichia coli (rHPAP(Ec)) and Pichia pastoris (rHPAP(Pp)) has been determined in two different crystal forms, both at 2.2A resolution. In both cases, the enzyme crystallized in its oxidized (inactive) state, in which both Fe atoms in the dinuclear active site are Fe(III). The main difference between the two structures is the conformation of the enzyme "repression loop". Proteolytic cleavage of this loop in vivo or in vitro results in significant activation of the mammalian PAPs. In the crystals obtained from rHPAP(Ec), the carboxylate side-chain of Asp145 of this loop acts as a bidentate ligand that bridges the two metal atoms, in a manner analogous to a possible binding mode for a phosphate ester substrate in the enzyme-substrate complex. The carboxylate side-chain of Asp145 and the neighboring Phe146 side-chain thus block the active site, thereby inactivating the enzyme. In the crystal structure of rHPAP(Pp), the enzyme "repression loop" has an open conformation similar to that observed in other mammalian PAP structures. The present structures demonstrate that the repression loop exhibits significant conformational flexibility, and the observed alternate binding mode suggests a possible inhibitory role for this loop.

Acid Phosphatase↗

Using xenon as a probe for dioxygen-binding sites in copper amine oxidases.

Potential dioxygen-binding sites in three Cu amine oxidases have been investigated by recording X-ray diffraction data at 1.7-2.2A resolution for crystals under a high pressure of xenon gas. Electron-density difference maps and crystallographic refinement provide unequivocal evidence for a number of Xe-binding sites in each enzyme. Only one of these sites is present in all three Cu amine oxidases studied. Structural changes elsewhere in the protein molecules are insignificant. The results illustrate the use of xenon as a probe for cavities, in which a protein may accommodate a dioxygen molecule. The finding of a potential dioxygen-binding cavity close to the active site of Cu amine oxidases may be relevant to the function of the enzymes, since the formation of a transient protein-dioxygen complex is a likely step in the catalytic mechanism. No evidence was found for xenon binding in a region of the molecule that was previously identified in two other Cu amine oxidases as a potential transient dioxygen-binding site.

Amine Oxidase (Copper-Containing)↗

Structure of Escherichia coli aminopeptidase P in complex with the inhibitor apstatin.

Aminopeptidase P (APPro) is a metalloprotease whose active site includes a dinuclear manganese(II) cluster. The enzyme cleaves the N-terminal residue from a polypeptide when the second residue is proline. A complex of Escherichia coli APPro (EcAPPro) with an inhibitor, apstatin [N-(2S,3R)-3-amino-2-hydroxy-4-phenyl-butanoyl-L-prolyl-L-prolyl-L-alaninamide], has been crystallized. Apstatin binds to the active site of EcAPPro with its N-terminal amino group coordinated to one of the two Mn(II) atoms at the metal centre. The apstatin hydroxyl group replaces a hydroxide ion which bridges the two metal atoms in the native enzyme. The first proline residue of apstatin lies in a small hydrophobic cleft. The structure of the apstatin-EcAPPro complex has been refined at 2.3 A resolution with residuals R = 0.179 and R(free) = 0.204. The structure of the complex illustrates how apstatin inhibits APPro and suggests how substrates may bind to the enzyme, but the basis of the proline-specificity remains elusive.

Amino Acid Sequence↗

Crystallization of GcnA, an N-acetyl-beta-D-glucosaminidase, from Streptococcus gordonii.

Streptococcus gordonii is a primary colonizer of the surface of human teeth. The gcnA gene is one of a number of genes involved in glycoside metabolism. GcnA has N-acetyl-beta-D-glucosaminidase (EC 3.2.1.52) activity; it has been overexpressed, purified and crystallized. Diffraction has been observed to beyond 1.5 A resolution and synchrotron data have been recorded to 1.55 A resolution. The crystals belong to the orthorhombic space group P2(1)2(1)2, with unit-cell parameters a = 112.5, b = 104.0, c = 110.0 A. The crystals contain either a monomer or a dimer in the asymmetric unit.

Acetylglucosaminidase↗

Tandem LIM domains provide synergistic binding in the LMO4:Ldb1 complex.

Nuclear LIM-only (LMO) and LIM-homeodomain (LIM-HD) proteins have important roles in cell fate determination, organ development and oncogenesis. These proteins contain tandemly arrayed LIM domains that bind the LIM interaction domain (LID) of the nuclear adaptor protein LIM domain-binding protein-1 (Ldb1). We have determined a high-resolution X-ray crystal structure of LMO4, a putative breast oncoprotein, in complex with Ldb1-LID, providing the first example of a tandem LIM:Ldb1-LID complex and the first structure of a type-B LIM domain. The complex possesses a highly modular structure with Ldb1-LID binding in an extended manner across both LIM domains of LMO4. The interface contains extensive hydrophobic and electrostatic interactions and multiple backbone-backbone hydrogen bonds. A mutagenic screen of Ldb1-LID, assessed by yeast two-hybrid and competition ELISA analysis, identified key features at the interface and revealed that the interaction is tolerant to mutation. These combined properties provide a mechanism for the binding of Ldb1 to numerous LMO and LIM-HD proteins. Furthermore, the modular extended interface may form a general mode of binding to tandem LIM domains.

Adaptor Proteins, Signal Transducing↗

Differential inhibition of six copper amine oxidases by a family of 4-(aryloxy)-2-butynamines: evidence for a new mode of inactivation.

A series of compounds derived from a previously identified substrate analogue of copper amine oxidases (CuAOs) (Shepard et al. (2002) Eur. J. Biochem. 269, 3645-3658) has been screened against six different CuAOs with a view to designing potent and selective inhibitors. The substrate analogues investigated were 4-(1-naphthyloxy)-2-butyn-1-amine, 4-(2-methylphenoxy)-2-butyn-1-amine, 4-(3-methylphenoxy)-2-butyn-1-amine, 4-(4-methylphenoxy)-2-butyn-1-amine, and 4-phenoxy-2-butyn-1-amine. These compounds were screened against equine plasma amine oxidase (EPAO), Pisum sativum amine oxidase (PSAO), Pichia pastoris lysyl oxidase (PPLO), bovine plasma amine oxidase (BPAO), human kidney diamine oxidase (KDAO), and Arthrobacter globiformis amine oxidase (AGAO) to examine the effect of different substituent groups on potency. Despite the similar structures of the 4-aryloxy analogues evaluated, striking differences in potency were observed. In addition, crystal structures of AGAO derivitized with 4-(2-naphthyloxy)-2-butyn-1-amine and 4-(4-methylphenoxy)-2-butyn-1-amine were obtained at a resolution of 1.7 A. The structures reveal a novel and unprecedented reaction mechanism involving covalent attachment of the alpha,beta-unsaturated aldehyde turnover product to the amino group of the reduced 2,4,5-trihydroxyphenylalanine quinone (TPQ) cofactor. Collectively, the structural and inhibition results support the feasibility of designing selective mechanism-based inhibitors of copper amine oxidases.

Allylamine↗

Structure of 9-amino-[N-(2-dimethylamino)propyl]acridine-4-carboxamide bound to d(CGTACG)(2): a comparison of structures of d(CGTACG)(2) complexed with intercalatorsin the presence of cobalt.

The structure of the complex formed between 9-amino-[N-(2-dimethylamino)propyl]acridine-4-carboxamide and d(CGTACG)(2) has been refined to a resolution of 1.55 A. The complex crystallized in space group C222. An asymmetric unit comprises two strands of DNA, one disordered drug molecule, two cobalt(II) ions, two magnesium ions and 32 water molecules. The DNA helices stack in continuous columns, with their four central base pairs adopting a B-like motif. The terminal G.C base pairs engage in different interactions. At one end of the duplex there is a CpG dinucleotide overlap modified by ligand intercalation and terminal cytosine exchange between symmetry-related duplexes. An intercalation complex is formed involving four DNA duplexes, four disordered ligand molecules and two pairs of base tetrads. The other end of the DNA is frayed, with the terminal guanine lying in the minor groove of the next duplex in the column. The structure is stabilized by guanine N7-cobalt(II) coordination. The structure is compared with previously published isomorphous structures of d(CGTACG)(2) complexed with intercalators in the presence of cobalt and it is concluded that the formation of this crystal form is primarily determined by DNA-DNA interactions and packing forces, rather than by special interactions between the ligand and the DNA. Given the nature of the ligands found in these complexes, the relevance of the quadruplex structure to the biological activity of those agents, known to be topoisomerase poisons, is questioned.

Acridines↗

Structure of the prolidase from Pyrococcus furiosus.

The structure of prolidase from the hyperthermophilic archaeon Pyrococcus furiosus (Pfprol) has been solved and refined at 2.0 A resolution. This is the first structure of a prolidase, i.e., a peptidase specific for dipeptides having proline as the second residue. The asymmetric unit of the crystals contains a homodimer of the enzyme. Each of the two protein subunits has two domains. The C-terminal domain includes the catalytic site, which is centered on a dinuclear metal cluster. In the as-isolated form of Pfprol, the active-site metal atoms are Co(II) [Ghosh, M., et al. (1998) J. Bacteriol. 180, 4781-9]. An unexpected finding is that in the crystalline enzyme the active-site metal atoms are Zn(II), presumably as a result of metal exchange during crystallization. Both of the Zn(II) atoms are five-coordinate. The ligands include a bridging water molecule or hydroxide ion, which is likely to act as a nucleophile in the catalytic reaction. The two-domain polypeptide fold of Pfprol is similar to the folds of two functionally related enzymes, aminopeptidase P (APPro) and creatinase. In addition, the catalytic C-terminal domain of Pfprol has a polypeptide fold resembling that of the sole domain of a fourth enzyme, methionine aminopeptidase (MetAP). The active sites of APPro and MetAP, like that of Pfprol, include a dinuclear metal center. The metal ligands in the three enzymes are homologous. Comparisons with the molecular structures of APPro and MetAP suggest how Pfprol discriminates against oligopeptides and in favor of Xaa-Pro substrates. The crystal structure of Pfprol was solved by multiple-wavelength anomalous dispersion. The crystals yielded diffraction data of relatively high quality and resolution, despite the fact that one of the two protein subunits in the asymmetric unit was found to be significantly disordered. The final R and R(free) values are 0.24 and 0.28, respectively.

Archaeal Proteins↗

Metal-substituted derivatives of the rubredoxin from Clostridium pasteurianum.

Five different metal-substituted forms of Clostridium pasteurianum rubredoxin have been prepared and crystallized. The single Fe atom present in the Fe(S-Cys)(4) site of the native form of the protein was exchanged in turn for Co, Ni, Ga, Cd and Hg. All five forms of rubredoxin crystallized in space group R3 and were isomorphous with the native protein. The Co-, Ni- and Ga-substituted proteins exhibited metal sites with geometries similar to that of the Fe form (effective D(2d) local symmetry), as did the Cd and Hg proteins, but with a significant expansion of the metal-sulfur bond lengths. A knowledge of these structures contributes to a molecular understanding of the function of this simple iron-sulfur electron-transport protein.

Bacterial Proteins↗