PubMed Health⌕ Search

Biomedical subjects

J O Lampen

Publications and source records attributed to J O Lampen.

At least 19 recordsLinked to original sources

The penicillin sensory transducer, BlaR, involved in the inducibility of beta-lactamase synthesis in Bacillus licheniformis is embedded in the plasma membrane via a four-alpha-helix bundle.

Prediction studies, conformational analyses and membrane-topology mapping lead to the conclusion that the penicillin sensory transducer, BlaR, involved in the inducibility of beta-lactamase synthesis in Bacillus licheniformis, is embedded in the plasma membrane bilayer via four transmembrane segments TM1-TM4 that form a four-alpha-helix bundle. The extracellular 262-amino-acid-residue polypeptide, S340-R601, that is fused at the carboxy end of TM4, possesses the amino acid sequence signature of a penicilloyl serine transferase. It probably functions as penicillin sensor. As an independent entity, this polypeptide behaves as a high-affinity penicillin-binding protein. As a component of the full-size BlaR, it adopts a different conformation presumably because of interactions with the extracellular 63-amino-acid-residue P53-S115 loop that connects TM2 and TM3. Reception of the penicillin-induced signal requires a precise conformation of the sensor but it does not involve penicilloylation of the serine residue S402 of motif STYK. Signal transmission through the plasma membrane by the four-alpha-helix bundle may proceed in a way comparable to that of the aspartate receptor, Tar. Signal emission in the cytosol by the intracellular 189-amino-acid-residue Y134-K322 loop that connects TM3 and TM4, may proceed via the activation of a putative metallopeptidase.

Amino Acid Sequence↗

Structure, function, and fate of the BlaR signal transducer involved in induction of beta-lactamase in Bacillus licheniformis.

The membrane-spanning protein BlaR is essential for the induction of beta-lactamase in Bacillus licheniformis. Its nature and location were confirmed by the use of an antiserum specific for its carboxy-terminal penicillin sensor, its function was studied by genetic dissection, and the structure of the penicillin sensor was derived from hydrophobic cluster analysis of the amino acid sequence by using, as a reference, the class A beta-lactamases with known three-dimensional structures. During the first 2 h after the addition of the beta-lactam inducer, full-size BlaR, bound to the plasma membrane, is produced, and then beta-lactamase is produced. By 2 h after induction, BlaR is present in various (membrane-bound and cytosolic) forms, and there is a gradual decrease in beta-lactamase production. The penicillin sensors of BlaR and the class D beta-lactamases show strong similarities in primary structures. They appear to have the same basic spatial disposition of secondary structures as that of the class A beta-lactamases, except that they lack several alpha helices and, therefore, have a partially uncovered five-stranded beta sheet and a more readily accessible active site. Alterations of BlaR affecting conserved secondary structures of the penicillin sensor and specific sites of the transducer annihilate beta-lactamase inducibility.

Amino Acid Sequence↗

Expression in Escherichia coli of the carboxy terminal domain of the BLAR sensory-transducer protein of Bacillus licheniformis as a water-soluble Mr 26,000 penicillin-binding protein.

A cloning vector has been constructed which allows production and export by Escherichia coli of the Met346-Arg601 carboxy terminal domain of the 601 amino acid BLAR sensory-transducer involved in beta-lactamase inducibility in Bacillus licheniformis. The polypeptide, referred to as BLAR-CTD, accumulates in the periplasm of E. coli in the form of a water-soluble, Mr 26,000 penicillin-binding protein. These data and homology searches suggest that BLAR has a membrane topology similar to that of other sensory-transducers involved in chemotaxis.

Amino Acid Sequence↗

Identification of BlaR, the signal transducer for beta-lactamase production in Bacillus licheniformis, as a penicillin-binding protein with strong homology to the OXA-2 beta-lactamase (class D) of Salmonella typhimurium.

The blaR gene of Bacillus licheniformis encodes the signal transducer for induction of the class A beta-lactamase. The protein product, BlaR, has a hydrophilic carboxy region that binds beta-lactams and shows high sequence homology to the class D beta-lactamases, particularly the OXA-2 beta-lactamase of Salmonella typhimurium. The BlaR-beta-lactam complex is stable and may provide the continuing stimulus needed for the prolonged production of the enzyme.

Amino Acid Sequence↗

Interaction of BlaI, the repressor for the beta-lactamase gene of Bacillus licheniformis, with the blaP and blaI promoters.

BlaI repressor for the beta-lactamase gene (blaP) of Bacillus licheniformis 749, was shown to repress expression of blaP and of the repressor gene (blaI), using the purified protein in a DNA-directed in vitro translation assay. Binding of BlaI to the promoter regions of blaP and blaI was examined by equilibrium and competitive binding assays. BlaI binds to the blaP promoter with an equal or only slightly higher affinity than to the blaI promoter. DNase I footprinting shows that BlaI binds directly to the blaP and blaI promoters, such that RNA polymerase binding and/or transcript elongation would be blocked.

Bacillus↗

Differential transcription of the bla regulatory region during induction of beta-lactamase in Bacillus licheniformis.

Induction of beta-lactamase (blaP) in Bacillus licheniformis involves the regulatory genes blaI (repressor), blaR1 (coinducer) and R2 (function unknown). Transcription of the bla genes during induction was followed by Northern hybridization. In the first 30 min 2.3-kb transcripts encoding blaI and blaR1 were present. Subsequently, blaP mRNA and short transcripts encoding only blaI accumulated and reached a peak at 1 h. All bla transcripts turn over rapidly. Active repressor is not required for the burst of blaI-blaR1 mRNA. The production of blaI-blaR1 mRNA, and thus of BlaR1, is probably controlled both at initiation of transcription and at a later step in its synthesis and degradation.

Bacillus↗

Repressor gene, blaI, for Bacillus licheniformis 749 beta-lactamase.

The repressor gene, blaI, for the beta-lactamase of Bacillus licheniformis 749 was functional when cloned in Escherichia coli, but addition of a beta-lactam did not lead to induction. One plasmid contained fragments from the inducible strain (source of repressor), the other carried fragments from the blaI- mutant 749/C (target). blaI lies just 5' to the promoter for the structural gene, blaP, and the target is the promoter region between the two genes. Interaction with both promoters seemed necessary for full repression. BlaI is a hydrophilic protein (Mr 15036) with the some structural similarities to repressors from Gram-negative bacteria.

Bacillus↗

Purification and DNA binding properties of the blaI gene product, repressor for the beta-lactamase gene, blaP, of Bacillus licheniformis.

The location of the repressor gene, blaI, for the beta-lactamase gene blaP of Bacillus licheniformis 749, on the 5' side of blaP, was confirmed by sequencing the bla region of the constitutive mutant 749/C. An amber stop codon, likely to result in a nonfunctional truncated repressor, was found at codon 32 of the 128 codon blaI open reading frame (ORF) located 5' to blaP. In order to study the DNA binding activity of the repressor, the structural gene for blaI, from strain 749, with its ribosome binding site was expressed using a two plasmid T7 RNA polymerase/promotor system (S. Tabor and C. C. Richardson. Proc. Natl. Acad. Sci. 82, 1074-1078 (1985). Heat induction of this system in Escherichia coli K38 resulted in the production of BlaI as 5-10% of the soluble cell protein. Repressor protein was then purified by ammonium sulfate fractionation and cation exchange chromatography. The sequence of the N-terminal 28 amino acid residues was determined and was as predicted from the DNA. Binding of BlaI to DNA was detected by the slower migration of protein DNA complexes during polyacrylamide gel electrophoresis. BlaI was shown to selectively bind DNA fragments carrying the promoter regions of blaI and blaP.

Bacillus↗

Cloning and sequencing of the blaZ gene encoding beta-lactamase III, a lipoprotein of Bacillus cereus 569/H.

It has not been clear whether the membrane-bound beta-lactamase III of Bacillus cereus 569 is a separate enzyme or a modified form of the secreted beta-lactamase I. The membrane enzyme is an acyl-glyceride thioether-linked lipoprotein (J. B. K. Nielsen and J. O. Lampen, Biochemistry 22:4652-4656, 1983) and thus is probably a separate entity. We cloned the beta-lactamase III gene (blaZ) on a 4.9-kilobase-pair ClaI fragment from mutant strain 569/H (constitutive for high-level production of beta-lactamases I, II, and III), and the nucleotide sequence was determined. The structural gene was flanked by typical promoter, transcription termination, and translation initiation sequences. Expression of the cloned gene in Escherichia coli was low in exponential-phase cultures and increased only as the cultures reached the stationary phase. The deduced amino acid sequence indicates a pre-beta-lactamase III of 316 amino acid residues (35,021 daltons), with a 29-residue signal peptide and a mature lipoprotein form of approximately 32,500 daltons. The 12 NH2-terminal residues of a 21-kilodalton tryptic peptide from the B. cereus membrane enzyme were in agreement with the sequence deduced from the cloned gene. The amino acid sequence was highly homologous to the class A beta-lactamases, especially that of Bacillus licheniformis 749. beta-Lactamase III is a distinct class A enzyme and the product of a separate gene (blaZ).

Amino Acid Sequence↗

A second regulatory gene, blaR1, encoding a potential penicillin-binding protein required for induction of beta-lactamase in Bacillus licheniformis.

A second regulatory locus (blaR1) required for the induction of beta-lactamase synthesis in Bacillus licheniformis 749 was cloned and sequenced. The gene was located on a 5.2-kilobase-pair SphI DNA fragment which also contained the beta-lactamase (blaP) and repressor (blaI) genes. Bacillus subtilis BD224 carrying these three genes synthesized beta-lactamase on exposure to cephalosporin C, whereas Escherichia coli HB101 carrying the genes did not show any detectable induction of the enzyme. An open reading frame of 1,803 bases was identified as the blaR1 gene by subcloning and DNA sequencing. The gene started 2 bases downstream of the termination codon of bla1 and was preceded by a putative Shine-Dalgarno sequence (AAGGA) with a spacing of 5 bases. The deduced blaR1 product (601 amino acids) had a molecular weight of 68,425. Five transmembrane regions were predicted from the hydrophobicity profile. The region around Phe-Ala-Pro-Ala-Ser-Thr-Tyr-Lys (amino acids 398 to 405), which appeared to be located outside the membrane, was homologous to the binding regions of penicillin-binding proteins, including the beta-lactamases. The segment of 22 amino acids from 400 to 421 showed more than 70% homology to the penicillin-binding region of PBP 2 of E. coli. The blaR1 gene encodes a potential penicillin receptor which is required for the induction of beta-lactamase in B. licheniformis 749.

Amino Acid Sequence↗

Transcriptional analysis of beta-lactamase regulation in Bacillus licheniformis.

The expression of the blaP gene for the beta-lactamase of Bacillus licheniformis was examined by transcriptional analyses. Radiolabeled probes containing the blaP gene or various regions 3' or 5' to it were used to analyze RNA samples prepared from induced and uninduced cultures of wild-type and mutant B. licheniformis strains. The level of blaP mRNA was low in uninduced wild-type cells. At 37 degrees C, blaP mRNA levels reached a maximum 1 h after induction while rising up to 180-fold and then declined, but remained severalfold above the uninduced level for several hours. The rate of beta-lactamase synthesis was roughly proportional to the levels of blaP mRNA in both wild-type and mutant strains, indicating that regulation of beta-lactamase formation occurs primarily at the level of transcription. Turnover of blaP mRNA in the presence of rifampin was rapid, giving a blaP mRNA half-life of about 2 min. Yet, high levels of blaP mRNA were maintained for at least 1 h after removal of free inducer. Three blaP mRNAs of 1.2, 2.9, and 3.4 kilobases were produced from the blaP promoter. The most abundant made up about 97% of all blaP transcripts and was also the smallest, ending at a transcriptional terminator located about 60 bases 3' to the blaP structural gene. Variables such as incubation temperature, cytotoxicity of inducer, and type of strain had essentially no effect on the ratio of large blaP mRNA to total blaP mRNA. The 2.9- and 3.4-kilobase blaP mRNAs identify potential locations of genetically linked regulators of beta-lactamase synthesis.

Bacillus↗

Processing of Bacillus cereus 569/H beta-lactamase I in Escherichia coli and Bacillus subtilis.

The gene for Bacillus cereus 569/H beta-lactamase I, penPC, has recently been cloned and sequenced (Mézes, P. S. F., Yang, Y. Q., Hussain, M., and Lampen, J. O. (1983) FEBS Lett. 161, 195-200). A typical prokaryotic signal peptide but with no lipoprotein modification site, as present in the Bacillus licheniformis 749/C beta-lactamase, was indicated by the DNA sequence for this secretory protein. We have here purified the beta-lactamase I products found in Escherichia coli and Bacillus subtilis carrying penPC and have determined the first 20 NH2-terminal amino acids of each of the forms. Processing of the beta-lactamase I in E. coli occurs at a single site which is characteristic for cleavage by a signal peptidase. B. subtilis secreted two distinct products to the culture medium which were both smaller than the single product formed in E. coli. Sequencing of [35S]Met-labeled pre-beta-lactamase I from phenylethyl alcohol-treated cells of B. cereus 569/H indicated that UUG is being utilized as the initiation codon for penPC. The same result was obtained for the pre-beta-lactamase I from similarly treated cells of the closely related B. cereus 5/B strain.

Amino Acid Sequence↗

Cloning and sequencing of the beta-lactamase I gene of Bacillus cereus 5/B and its expression in Bacillus subtilis.

The beta-lactamases of Bacillus cereus have attracted interest because they are secreted efficiently, because multiple enzymes are frequently present, and because their regulation has unusual features. beta-Lactamase I of strain 5/B is produced constitutively at a high level, and the exoenzyme appears to be several thousand daltons larger than the corresponding product of strain 569/H. We have cloned the gene for 5/B beta-lactamase I in Escherichia coli and B. subtilis and have sequenced the structural portion and the regulatory regions. The 5/B enzyme is produced at a low level in E. coli RR1(pRWY200) and remains cellbound. In B. subtilis it is formed in large amounts, and over 90% of it is released into the medium. There is a large degree of homology between the promoter and leader peptide regions of the 5/B and 569/H genes; both utilize UUG as the translation initiation codon (P. S. F. Mézes, R. W. Blacher, and J. O. Lampen, (J. Biol. Chem. 260:1218-1223, 1985). Although there are significant differences in the peptide segment where processing would be expected to occur, the NH2 terminus of the major 5/B product from B. subtilis BD170(pRWY215) is His-44, which is the same as the NH2 terminus of the major 569/H product from B. subtilis BD170(pRWM5).

Amino Acid Sequence↗

Cloning and sequencing of the metallothioprotein beta-lactamase II gene of Bacillus cereus 569/H in Escherichia coli.

The structural gene for beta-lactamase II (EC 3.5.2.6), a metallothioenzyme, from Bacillus cereus 569/H (constitutive for high production of the enzyme) was cloned in Escherichia coli, and the nucleotide sequence was determined. This is the first class B beta-lactamase whose primary structure has been reported. The amino acid sequence of the exoenzyme form, deduced from the DNA, indicates that beta-lactamase II, like other secreted proteins, is synthesized as a precursor with a 30-amino acid N-terminal signal peptide. The pre-beta-lactamase II (Mr, 28,060) is processed in E. coli and in B. cereus to a single mature protein (Mr, 24,932) which is totally secreted by B. cereus but in E. coli remains intracellular, probably in the periplasm. The expression of the gene in E. coli RR1 on the multicopy plasmid pRWHO12 was comparable to that in B. cereus, where it is presumably present as a single copy. The three histidine residues that are involved (along with the sole cysteine of the mature protein) in Zn(II) binding and hence in enzymatic activity against beta-lactams were identified. These findings will help to define the secondary structure, mechanism of action, and evolutionary lineage of B. cereus beta-lactamase II and other class B beta-lactamases.

Amino Acid Sequence↗

Beta-lactamase III of Bacillus cereus 569: membrane lipoprotein and secreted protein.

A third beta-lactamase in Bacillus cereus 569 has been identified and characterized. It corresponds to gamma-penicillinase reported by Pollock [Pollock, M. R. (1956) J. Gen. Microbiol. 15, 154-169] but whose existence has been questioned since then. It will be called beta-lactamase III. It resembles the class A beta-lactamases but is immunologically distinct from the major class A secreted beta-lactamase I of B. cereus. As with several other Gram-positive beta-lactamases it occurs in two forms, membrane bound as a glyceride-cysteine lipoprotein and as a hydrophilic secreted protein formed by cleavage on the carboxyl side of the modified cysteine that is the membrane attachment site. It is produced in all B. cereus 569 strains tested but is absent in B. cereus 5/b. Antibody to beta-lactamase III interacts to varying degrees with all the known class A beta-lactamases, most strongly with that of B. licheniformis 749/C.

Antigen-Antibody Complex↗