PubMed Health⌕ Search

Biomedical subjects

J P Canler

Publications and source records attributed to J P Canler.

2 recordsLinked to original sources

Nitrification in biofilters under variable load and low temperature.

The evolution of European legislation has led to the rehabilitation of many wastewater treatment plants, sometimes through the installation of a biological complementary treatment stage. Among these sites, some plants in mountain areas are considering a biofiltration process. The design of such plants, especially for winter, appears to be tricky because of the very low influent temperature, the high performance requested for ammonia removal and the important and short term variations of the influent loads. The monitoring of a site during two consecutive winters has allowed us to study some aspects of the treatment. The major results are: a maximal nitrification capacity of about 0.59 kg of formed N-NO3- x m(-3) of material x d(-1) with an influent temperature around 7 degrees C at the plant inlet; a nitrifying biomass growth rate, expressed as nitrifying capacity increase, of 0.03 kg of N-NO3- x m(-3) of material x d(-2); quick and short terms load variations require a specific operation of the filters prior to the load increase, in order to grow enough active biomass to be able to treat the peak load immediately.

Ammonia↗

Aerobic biological treatment of grease from urban wastewater treatment plants.

Biological grease treatment is rapidly expanding in France, with about sixty plants recorded in 1998. They are designed at a volumetric loading of 2.5 kg COD/m3 of reactor per day. Several sites have been selected for their representativity and studied. Prior to detailed monitoring over a long period, preliminary investigations provided some information on the operation of these reactors. They showed that most of them are not optimized (low removal efficiency), but have limited operational constraints given their low load. This study enabled us to assess the quantity actually skimmed from the surface of the aerated grease separator in relation to the lipids in raw sewage, and to define the precautions to be taken for sampling and analysis of grease, before any data interpretation. A detailed measurement series was then implemented. It shows the considerable value of this process for the reduction of lipids and highlights the main operational parameters in order to obtain high performance while keeping low operating constraints.

Biodegradation, Environmental↗