PubMed Health⌕ Search

Biomedical subjects

J R Pringle

Publications and source records attributed to J R Pringle.

At least 19 recordsLinked to original sources
PubMed1992

Molecular analysis of Saccharomyces cerevisiae chromosome I. On the number of genes and the identification of essential genes using temperature-sensitive-lethal mutations.

Previous analyses of Saccharomyces cerevisiae chromosome I have suggested that the majority (greater than 75%) of single-copy essential genes on this chromosome are difficult or impossible to identify using temperature-sensitive (Ts-) lethal mutations. To investigate whether this situation reflects intrinsic difficulties in generating temperature-sensitive proteins or constraints on mutagenesis in yeast, we subjected three cloned essential genes from chromosome I to mutagenesis in an Escherichia coli mutator strain and screened for Ts- lethal mutations in yeast using the "plasmid-shuffle" technique. We failed to obtain Ts- lethal mutations in two of the genes (FUN12 and FUN20), while the third gene yielded such mutations, but only at a low frequency. DNA sequence analysis of these mutant alleles and of the corresponding wild-type region revealed that each mutation was a single substitution not in the previously identified gene FUN19, but in the adjacent, newly identified essential gene FUN53. FUN19 itself proved to be non-essential. These results suggest that many essential proteins encoded by genes on chromosome I cannot be rendered thermolabile by single mutations. However, the results obtained with FUN53 suggest that there may also be significant constraints on mutagenesis in yeast. The 5046 base-pair interval sequenced contains the complete FUN19, FUN53 and FUN20 coding regions, as well as a portion of the adjacent non-essential FUN21 coding region. In all, 68 to 75% of this interval is open reading frame. None of the four predicted products shows significant homologies to known proteins in the available databases.

Amino Acid Sequence↗
PubMed1992

A Ser/Thr-rich multicopy suppressor of a cdc24 bud emergence defect.

MSB2 was identified previously as a multicopy suppressor of a temperature-sensitive mutation in CDC24, a gene required for polarity establishment and bud formation in Saccharomyces cerevisiae. The inferred MSB2 product contains 1306 amino acids, 42% of which are Ser or Thr. Its Ser+Thr-richness and hydrophobicity profile suggest that Msb2p may be an integral membrane protein containing a long, periplasmic, N-terminal domain and a short, cytoplasmic, C-terminal domain. Cells that lack MSB2 display no obvious mutant phenotypes. MSB2 is located between the centromere and KSS1 on the right arm of chromosome VII. Although physical mapping suggests that MSB2 and LEU1 (on the left arm of chromosome VII) are approximately 40 kb apart, the genetic map distance observed between leu1 and an msb2::URA3 marker was only 2.3 cM.

Amino Acid Sequence↗
PubMed1992

RSR1, a ras-like gene homologous to Krev-1 (smg21A/rap1A): role in the development of cell polarity and interactions with the Ras pathway in Saccharomyces cerevisiae.

The Saccharomyces cerevisiae ras-like gene RSR1 is particularly closely related to the mammalian gene Krev-1 (also known as smg21A and rap1A). RSR1 was originally isolated as a multicopy suppressor of a cdc24 mutation, which causes an inability to bud or establish cell polarity. Deletion of RSR1 itself does not affect growth but causes a randomization of bud position. We have now constructed mutant alleles of RSR1 encoding proteins with substitutions of Val for Gly at position 12 (analogous to constitutively activated Ras proteins) or Asn for Lys at position 16 (analogous to a dominant-negative Ras protein). rsr1Val-12 could not restore a normal budding pattern to an rsr1 deletion strain but could suppress a cdc24 mutation when overexpressed. rsr1Asn-16 could randomize the budding pattern of a wild-type strain even in low copy number but was not lethal even in high copy number. These and other results suggest that Rsr1p functions only in bud site selection and not in subsequent events of polarity establishment and bud formation, that this function involves a cycling between GTP-bound and GDP-bound forms of the protein, and that the suppression of cdc24 involves direct interaction between Rsr1p[GTP] and Cdc24p. Functional homology between Rsr1p and Krev-1 p21 was suggested by the observations that expression of the latter protein in yeast cells could both suppress a cdc24 mutation and randomize the budding pattern of wild-type cells. As Krev-1 overexpression can suppress ras-induced transformation of mammalian cells, we looked for effects of RSR1 on the S. cerevisiae Ras pathway. Although no suppression of the activated RAS2Val-19 allele was observed, overexpression of rsr1Val-12 suppressed the lethality of strains lacking RAS gene function, apparently through a direct activation of adenyl cyclase. This interaction of Rsr1p with the effector of Ras in S. cerevisiae suggests that Krev-1 may revert ras-induced transformation of mammalian cells by affecting the interaction of ras p21 with its effector.

Adenylyl Cyclases↗
PubMed1991

Yeast BUD5, encoding a putative GDP-GTP exchange factor, is necessary for bud site selection and interacts with bud formation gene BEM1.

Cells of the yeast S. cerevisiae choose bud sites in an axial or bipolar spatial pattern depending on their cell type. We have identified a gene, BUD5, that resembles BUD1 and BUD2 in being required for both patterns; bud5- mutants also exhibit random budding in all cell types. The BUD5 nucleotide sequence predicts a protein of 538 amino acids that has similarity to the S. cerevisiae CDC25 product, an activator of RAS proteins that catalyzes GDP-GTP exchange. Two potential targets of BUD5 are known: BUD1 (RSR1) and CDC42, proteins involved in bud site selection and bud formation, respectively, that have extensive similarity to RAS. We also show that BUD5 interacts functionally with a gene, BEM1, that is required for bud formation. This interaction provides further support for the view that products involved in bud site selection guide the positioning of a complex necessary for bud formation.

Amino Acid Sequence↗
PubMed1991

Cellular morphogenesis in the Saccharomyces cerevisiae cell cycle: localization of the CDC11 gene product and the timing of events at the budding site.

The Saccharomyces cerevisiae CDC3, CDC10, CDC11, and CDC12 genes encode a family of homologous proteins that are not closely related to other known proteins [Haarer BK, Ketcham SR, Ford SK, Ashcroft DJ, and Pringle JR (submitted)]. Temperature-sensitive mutants defective in any of these four genes display essentially identical pleiotropic phenotypes that include abnormal cell-wall deposition and bud growth, an inability to complete cytokinesis, and a failure to form the ring of 10 nm filaments that normally lies directly subjacent to the plasma membrane in the neck region of budding cells. We showed previously that the CDC3 and CDC12 gene products localize to the region of the mother-bud neck and are probably constituents of the ring of 10 nm filaments. We now report the generation of polyclonal antibodies specific for the CDC11 product (Cdc11p) and the use of these antibodies in immunofluorescence experiments with wild-type and mutant cells. The results suggest that Cdc11p is also a constituent of the filament ring, and thus support the hypothesis that the S. cerevisiae 10 nm filaments represent a novel type of eukaryotic cytoskeletal element. Cdc11p and actin both localize to the budding site well in advance of bud emergence and at approximately the same time, and both proteins also remain localized at the old budding site for some time after cytokinesis. Cdc11p also localizes to regions of cell-wall reorganization in mating cells and in cells responding to purified mating pheromone. Surprisingly, most preparations of affinity purified Cdc11p-specific antibodies also stained the nuclear and cytoplasmic microtubules. Although this staining probably reflects the existence of an epitope shared by Cdc11p and some microtubule-associated protein, the possibility that a fraction of the Cdc11p is associated with the microtubules could not be eliminated.

Cell Cycle↗
PubMed1991

Budding and cell polarity in Saccharomyces cerevisiae.

Budding by yeast follows a sequence of three stages. These include selection of a non-random bud-site, organization of that site and establishment of an associated axis of cytoskeletal polarity, and localized growth of the cell surface to produce the bud. Numerous components involved in each stage have been identified. As some of these components have close homologs in other organisms, there may exist common mechanisms involved in the establishment of cell polarity.

Animal Population Groups↗
PubMed1991

Cellular morphogenesis in the Saccharomyces cerevisiae cell cycle: localization of the CDC3 gene product and the timing of events at the budding site.

Budding cells of the yeast Saccharomyces cerevisiae possess a ring of 10-nm-diameter filaments, of unknown biochemical nature, that lies just inside the plasma membrane in the neck connecting the mother cell to its bud. Electron microscopic observations suggest that these filaments assemble at the budding site coincident with bud emergence and disassemble shortly before cytokinesis (Byers, B. and L. Goetsch. 1976. J. Cell Biol. 69:717-721). Mutants defective in any of four genes (CDC3, CDC10, CDC11, or CDC12) lack these filaments and display a pleiotropic phenotype that involves abnormal bud growth and an inability to complete cytokinesis. We showed previously by immunofluorescence that the CDC12 gene product is probably a constituent of the ring of 10-nm filaments (Haarer, B. and J. Pringle. 1987. Mol. Cell. Biol. 7:3678-3687). We now report the use of fusion proteins to generate polyclonal antibodies specific for the CDC3 gene product. In immunofluorescence experiments, these antibodies decorated the neck regions of wild-type and mutant cells in patterns suggesting that the CDC3 gene product is also a constituent of the ring of 10-nm filaments. We also used the CDC3-specific and CDC12-specific antibodies to investigate the timing of localization of these proteins to the budding site. The results suggest that the CDC3 protein is organized into a ring at the budding site well before bud emergence and remains so organized for some time after cytokinesis. The CDC12 product appears to behave similarly, but may arrive at the budding site closer to the time of bud emergence, and disappear from that site more quickly after cytokinesis, than does the CDC3 product. Examination of mating cells and cells responding to purified mating pheromone revealed novel arrangements of the CDC3 and CDC12 products in the regions of cell wall reorganization. Both proteins were present in normal-looking ring structures at the bases of the first zygotic buds.

Antibodies, Fungal↗
PubMed1991

Genetic analysis of Saccharomyces cerevisiae chromosome I: on the role of mutagen specificity in delimiting the set of genes identifiable using temperature-sensitive-lethal mutations.

In a previous attempt to identify as many as possible of the essential genes on Saccharomyces cerevisiae chromosome I, temperature-sensitive (Ts-) lethal mutations that had been induced by ethyl methane-sulfonate or nitrosoguanidine were analyzed. Thirty-two independently isolated mutations that mapped to chromosome I identified only three complementation groups, all of which had been known previously. In contrast, molecular analyses of segments of the chromosome have suggested the presence of numerous additional essential genes. In order to assess the degree to which problems of mutagen specificity had limited the set of genes detected using Ts- lethal mutations, we isolated a new set of such mutations after mutagenesis with UV or nitrogen mustard. Surprisingly, of 21 independently isolated mutations that mapped to chromosome I, 17 were again in the same three complementation groups as identified previously, and two of the remaining four mutations were apparently in a known gene involved in cysteine biosynthesis. Of the remaining two mutations, one was in one of the essential genes identified in the molecular analyses, and the other was too leaky to be mapped. These results suggest that only a minority of the essential genes in yeast can be identified using Ts- lethal mutations, regardless of the mutagen used, and thus emphasize the need to use multiple genetic strategies in the investigation of cellular processes.

Chromosome Mapping↗
PubMed1991

Molecular analysis of Saccharomyces cerevisiae chromosome I: identification of additional transcribed regions and demonstration that some encode essential functions.

Saccharomyces cerevisiae chromosome I has provided a vivid example of the "gene-number paradox." Although molecular studies have suggested that there are greater than 100 transcribed regions on the chromosome, classical genetic studies have identified only about 15 genes, including just 6 identified in intensive studies using Ts- lethal mutations. To help elucidate the reasons for this disparity, we have undertaken a detailed molecular analysis of a 34-kb segment of the left arm of the chromosome. This segment contains the four known genes CDC24, WHI1, CYC3 and PYK1 plus at least seven transcribed regions of unknown function. The 11 identified transcripts have a total length of approximately 25.9 kb, suggesting that greater than or equal to 75% of the DNA in this region is transcribed. Of the transcribed regions of unknown function, three are essential for viability on rich medium and three appear to be nonessential, as judged by the lethality or nonlethality of deletions constructed using integrative transformation methods. No obvious phenotypes were associated with the deletions in the apparently nonessential genes. However, two of these genes may have homologs elsewhere in the genome, as judged from the appearance of additional bands when DNA-DNA blot hybridizations were performed at reduced stringency. Taken together, the results provide further evidence that the limitations of classical genetic studies of chromosome I cannot be explained solely by a lack of genes, or even a lack of essential genes, on the chromosome.

Bacteriophage lambda↗
PubMed1991

CDC55, a Saccharomyces cerevisiae gene involved in cellular morphogenesis: identification, characterization, and homology to the B subunit of mammalian type 2A protein phosphatase.

Microscopic screening of a collection of cold-sensitive mutants of Saccharomyces cerevisiae led to the identification of a new gene, CDC55, which appears to be involved in the morphogenetic events of the cell cycle. CDC55 maps between CDC43 and CHC1 on the left arm of chromosome VII. At restrictive temperature, the original cdc55 mutant produces abnormally elongated buds and displays a delay or partial block of septation and/or cell separation. A cdc55 deletion mutant displays a cold-sensitive phenotype like that of the original isolate. Sequencing of CDC55 revealed that it encodes a protein of about 60 kDa, as confirmed by Western immunoblots using Cdc55p-specific antibodies. This protein has greater than 50% sequence identity to the B subunits of rabbit skeletal muscle type 2A protein phosphatase; the latter sequences were obtained by analysis of peptides derived from the purified protein, a polymerase chain reaction product, and cDNA clones. An extragenic suppressor of the cdc55 mutation lies in BEM2, a gene previously identified on the basis of an apparent role in bud emergence.

Amino Acid Sequence↗
PubMed1991

Use of a screen for synthetic lethal and multicopy suppressee mutants to identify two new genes involved in morphogenesis in Saccharomyces cerevisiae.

Genes CDC24 and CDC42 are required for the establishment of cell polarity and for bud formation in Saccharomyces cerevisiae. Temperature-sensitive (Ts-) mutations in either of these genes cause arrest as large, unbudded cells in which the nuclear cycle continues. MSB1 was identified previously as a multicopy suppressor of Ts- cdc24 and cdc42 mutations. We have now sequenced MSB1 and constructed a deletion of this gene. The predicted amino acid sequence does not closely resemble any other in the available data bases, and the deletion does not produce any readily detectable phenotype. However, we have used a colony-sectoring assay to identify additional genes that appear to interact with MSB1 and play a role in bud emergence. Starting with a strain deleted for the chromosomal copy of MSB1 but containing MSB1 on a high-copy-number plasmid, mutants were identified in which MSB1 had become essential for viability. The new mutations defined two genes, BEM1 and BEM2; both the bem1 and bem2 mutations are temperature sensitive and are only partially suppressed by MSB1. In bem1 cells, a single copy of MSB1 is necessary and sufficient for viability at 23 or 30 degrees C, but even multiple copies of MSB1 do not fully suppress the growth defect at 37 degrees C. In bem2 cells, a single copy of MSB1 is necessary and sufficient for viability at 23 degrees C, multiple copies are necessary for viability at 30 degrees C, and even multiple copies of MSB1 do not suppress the growth defect at 37 degrees C. In a wild-type background (i.e., a single chromosomal copy of MSB1), both bem1 and bem2 mutations cause cells to become large and multinucleate even during growth at 23 degrees C, suggesting that these genes are involved in bud emergence. This suggestion is supported for BEM1 by other evidence obtained in a parallel study (J. Chant, K. Corrado, J. Pringle, and I. Herskowitz, submitted for publication). BEM1 maps centromere distal to TYR1 on chromosome II, and BEM2 maps between SPT15 and STP2 on chromosome V.

Amino Acid Sequence↗
PubMed1990

CDC42 and CDC43, two additional genes involved in budding and the establishment of cell polarity in the yeast Saccharomyces cerevisiae.

Budding in the yeast Saccharomyces cerevisiae involves a polarized deposition of new cell surface material that is associated with a highly asymmetric disposition of the actin cytoskeleton. Mutants defective in gene CDC24, which are unable to bud or establish cell polarity, have been of great interest with regard to both the mechanisms of cellular morphogenesis and the mechanisms that coordinate cell-cycle events. To gain further insights into these problems, we sought additional mutants with defects in budding. We report here that temperature-sensitive mutants defective in genes CDC42 and CDC43, like cdc24 mutants, fail to bud but continue growth at restrictive temperature, and thus arrest as large unbudded cells. Nearly all of the arrested cells appear to begin nuclear cycles (as judged by the occurrence of DNA replication and the formation and elongation of mitotic spindles), and many go on to complete nuclear division, supporting the hypothesis that the events associated with budding and those of the nuclear cycle represent two independent pathways within the cell cycle. The arrested mutant cells display delocalized cell-surface deposition associated with a loss of asymmetry of the actin cytoskeleton. CDC42 maps distal to the rDNA on chromosome XII and CDC43 maps near lys5 on chromosome VII.

Cell Cycle↗
PubMed1990

Molecular characterization of CDC42, a Saccharomyces cerevisiae gene involved in the development of cell polarity.

The Saccharomyces cerevisiae CDC42 gene product is involved in the morphogenetic events of the cell division cycle; temperature-sensitive cdc42 mutants are unable to form buds and display delocalized cell-surface deposition at the restrictive temperature (Adams, A. E. M., D. I. Johnson, R. M. Longnecker, B. F. Sloat, and J. R. Pringle. 1990. J. Cell Biol. 111:131-142). To begin a molecular analysis of CDC42 function, we have isolated the CDC42 gene from a yeast genomic DNA library. The use of the cloned DNA to create a deletion of CDC42 confirmed that the gene is essential. Overexpression of CDC42 under control of the GAL10 promoter was not grossly deleterious to cell growth but did perturb the normal pattern of selection of budding sites. Determination of the DNA and predicted amino acid sequences of CDC42 revealed a high degree of similarity in amino acid sequence to the ras and rho (Madaule, P., R. Axel, and A. M. Myers. 1987. Proc. Natl. Acad. Sci. 84:779-783) families of gene products. The similarities to ras proteins (approximately 40% identical or related amino acids overall) were most pronounced in the regions that have been implicated in GTP binding and hydrolysis and in the COOH-terminal modifications leading to membrane association, suggesting that CDC42 function also involves these biochemical properties. The similarities to the rho proteins (approximately 60% identical or related amino acids overall) were more widely distributed through the coding region, suggesting more extensive similarities in as yet undefined biochemical properties and functions.

Amino Acid Sequence↗