PubMed Health⌕ Search

Biomedical subjects

J Vörös

Publications and source records attributed to J Vörös.

17 recordsLinked to original sources
PubMed2006

Dynamic, electronically switchable surfaces for membrane protein microarrays.

Microarray technology is a powerful tool that provides a high throughput of bioanalytical information within a single experiment. These miniaturized and parallelized binding assays are highly sensitive and have found widespread popularity especially during the genomic era. However, as drug diagnostics studies are often targeted at membrane proteins, the current arraying technologies are ill-equipped to handle the fragile nature of the protein molecules. In addition, to understand the complex structure and functions of proteins, different strategies to immobilize the probe molecules selectively onto a platform for protein microarray are required. We propose a novel approach to create a (membrane) protein microarray by using an indium tin oxide (ITO) microelectrode array with an electronic multiplexing capability. A polycationic, protein- and vesicle-resistant copolymer, poly(l-lysine)-grafted-poly(ethylene glycol) (PLL-g-PEG), is exposed to and adsorbed uniformly onto the microelectrode array, as a passivating adlayer. An electronic stimulation is then applied onto the individual ITO microelectrodes resulting in the localized release of the polymer thus revealing a bare ITO surface. Different polymer and biological moieties are specifically immobilized onto the activated ITO microelectrodes while the other regions remain protein-resistant as they are unaffected by the induced electrical potential. The desorption process of the PLL-g-PEG is observed to be highly selective, rapid, and reversible without compromising on the integrity and performance of the conductive ITO microelectrodes. As such, we have successfully created a stable and heterogeneous microarray of biomolecules by using selective electronic addressing on ITO microelectrodes. Both pharmaceutical diagnostics and biomedical technology are expected to benefit directly from this unique method.

Electrodes↗
PubMed2006

Adhesion of polyelectrolyte microcapsules through biotin-streptavidin specific interaction.

Adhesion of PAH/PSS and PDADMAC/PSS capsules through electrostatic and specific interactions has been investigated using reflective interference contrast microscopy (RICM). Adhesion of capsules via electrostatic interactions was found to be spontaneous and strong. Capsules functionalized with poly(l-lysine)-graft-poly(ethylene glycol) (PLL-g-PEG) did not exhibit significant adhesion (as determined by the adhesion area) to streptavidin-coated substrates, whereas capsules functionalized with biotinylated PLL-g-PEG showed a significantly larger adhesion area. Using continuum mechanical models, the total adhesion energies for these cases were calculated and were found to correspond to several tens of individual biotin-streptavidin pairs. The application of specific interactions such as the biotin-streptavidin system for controlled capsule adhesion has been demonstrated in this study.

Adhesiveness↗
PubMed2005

Waveguide excitation fluorescence microscopy: a new tool for sensing and imaging the biointerface.

A novel biosensing and imaging technique, the waveguide excitation fluorescence microscope, has been developed for the dynamic and quantitative investigation of bio-interfacial events in situ, ranging from ligand-receptor binding to focal adhesion formation in cell-surface interactions. The technique makes use of the evanescent field created when light travels in a mono-mode, planar optical waveguide to excite fluorescence in the near interface region. Advantages of the technique include high target sensitivity for fluorescence detection (femtomolar range), high surface specificity (ca. 100 nm perpendicular to the waveguide), large area analysis with submicron resolution, 'built-in' calibration of fluorescent light gain, and the capability to perform multi-colour imaging in situ and in real time. In this work, the sensitivity of the system has already been demonstrated through dynamic measurements of the streptavidin-biotin binding event to below 20 pM concentrations, signal to noise comparisons with conventional fluorescence microscopy have shown more than a 10-fold improvement, and surface specificity of the technique has also been illustrated in a comparison of fibroblast focal adhesion images. Thus, this new tool can be used to illuminate processes occurring at the interface between biology and synthetic surfaces in a unique manner.

Biosensing Techniques↗
PubMed2005

Locally Addressable Electrochemical Patterning Technique (LAEPT) applied to poly(L-lysine)-graft-poly(ethylene glycol) adlayers on titanium and silicon oxide surfaces.

The protein-resistant polycationic graft polymer, poly(L-lysine)-g-poly(ethylene glycol) (PLL-g-PEG), was uniformly adsorbed onto a homogenous titanium surface and subsequently subjected to a direct current (dc) voltage. Under the influence of an ascending cathodic and anodic potential, there was a steady and gradual loss of PLL-g-PEG from the conductive titanium surface while no desorption was observed on the insulating silicon oxide substrates. We have implemented this difference in the electrochemical response of PLL-g-PEG on conductive titanium and insulating silicon oxide regions as a biosensing platform for the controlled surface functionalization of the titanium areas while maintaining a protein-resistant background on the silicon oxide regions. A silicon-based substrate was micropatterned into alternating stripes of conductive titanium and insulating silicon oxide with subsequent PLL-g-PEG adsorption onto its surfaces. The surface modified substrate was then subjected to +1800 mV (referenced to the silver electrode). It was observed that the potentiostatic action removed the PLL-g-PEG from the titanium stripes without inducing any polyelectrolyte loss from the silicon oxide regions. Time-of-flight secondary ions mass spectroscopy and fluorescence microscopy qualitatively confirmed the PLL-g-PEG retention on the silicon oxide stripes and its absence on the titanium region. This method, known as "Locally Addressable Electrochemical Patterning Technique" (LAEPT), offers great prospects for biomedical and biosensing applications. In an attempt to elucidate the desorption mechanism of PLL-g-PEG in the presence of an electric field on titanium surface, we have conducted electrochemical impedance spectroscopy experiments on bare titanium substrates. The results showed that electrochemical transformations occurred within the titanium oxide layer; its impedance and polarization resistance were found to decrease steadily upon both cathodic and anodic polarization resulting in the polyelectrolyte desorption from the titanium surface.

Biosensing Techniques↗
PubMed2005

Change of zeta potential of biocompatible colloidal oxide particles upon adsorption of bovine serum albumin and lysozyme.

The amounts of negatively charged bovine serum albumin and positively charged lysozyme adsorbed on alumina, silica, titania, and zirconia particles (diameters 73 to 271 nm) in aqueous suspensions are measured. The adsorbed proteins change the zeta potentials and the isoelectric points (IEP) of the oxide particles. The added to adsorbed protein ratios at pH 7.5 are compared with the protein treated particle zeta potentials. It is found that the amounts of adsorbed proteins on the alumina, silica, and titania (but not on the zirconia) particle surfaces are highly correlated with the zeta potential. For the slightly less hydrophilic zirconia particles high amounts of protein adsorption are observed even under repulsive electrostatic conditions. One reason could be that the hydrophobic effect plays a more important role for zirconia than electrostatic interaction.

Adsorption↗
PubMed2004

About the role of water in surface-grafted poly(ethylene glycol) layers.

We focus on the role of water in a protein-resistant poly(ethylene glycol) (PEG) layer. Using the combination of two experimental techniques, namely, the extended surface forces apparatus and the quartz crystal microbalance, we demonstrate that the water content inside these surface-grafted layers is over 80 vol % while the conformational space of the PEG chains is significantly modulated in water. Discrete and reversible film thickness transitions of 1.25 A size are shown to occur when the film is compressed, a finding that suggests a high degree of organization in the PEG/water complex. The results are discussed in terms of the excellent protein resistance properties of this type of surface.

Letter↗
PubMed2003

Surface modification of PLGA microspheres.

Microspheres made of poly(lactic-co-glycolic acid) (PLGA) are biocompatible and biodegradable, rendering them a promising tool in the context of drug delivery. However, nonspecific adsorption of plasma proteins on PLGA micro- and nanospheres is a main limitation of drug targeting. Poly(L-lysine)-g-poly(ethylene glycol) (PLL-g-PEG), physisorbed on flat metal oxide surfaces, has previously been shown to suppress protein adsorption drastically. The goal of our work was to characterize the efficiency of the protein repellent character of PLL-g-PEG on PLGA microspheres and to show the feasibility of introducing functional groups on the PLGA microspheres via functionalized PLL-g-PEG. To quantify the adsorbed amount of protein, a semiquantitative method that uses confocal laser scanning microscopy (CLSM) was applied. The first part of the experiment confirms the feasibility of introducing specific functional groups on PLL-g-PEG-coated PLGA microspheres. In the second part of the experiment, PLL-g-PEG-coated PLGA microspheres show a drastic decrease of adsorbed proteins by two orders of magnitude in comparison to uncoated PLGA microspheres. Low protein-binding, functionalizable microspheres provide a fundamental basis for the design of drug delivery and biosensor systems.

Biosensing Techniques↗
PubMed2003

Electrochemical optical waveguide lightmode spectroscopy (EC-OWLS): a pilot study using evanescent-field optical sensing under voltage control to monitor polycationic polymer adsorption onto indium tin oxide (ITO)-coated waveguide chips.

A new technique has been developed that combines evanescent-field optical sensing with electrochemical control of surface adsorption processes. This new technique, termed "electrochemical optical waveguide lightmode spectroscopy" (EC-OWLS), proved efficient in monitoring molecular surface adsorption and layer thickness changes of an adsorbed polymer layer examined in situ as a function of potential applied to a waveguide in a pilot study. For optical sensing, a layer of indium tin oxide (ITO) served as both a high-refractive-index waveguide and a conductive electrode. In addition, an electrochemical flow-through fluid cell was provided, which incorporated working, reference, and counter electrodes, and was compatible with the constraints of optical sensing. Poly(L-lysine)-grafted-poly(ethylene glycol) (PLL-g-PEG) served as a model, polycation adsorbate. Adsorption of PLL-g-PEG from aqueous buffer solution increased from 125 to 475 ng/cm(2 )along a sigmoidal path as a function of increasing potential between 0 and 1.5 V versus the Ag reference electrode. Upon buffer rinse, adsorption was partially reversible when a potential of >/=0.93 V was maintained on the ITO waveguide. However, reducing the applied potential back to 0 V before rinsing resulted in irreversible polymer adsorption. PLL-g-PEG modified with biotin demonstrated similar adsorption characteristics, but subsequent streptavidin binding was independent of biotin concentration. Applying positive potentials resulted in increased adsorbed mass, presumably due to polymer chain extension and reorganization in the molecular adlayer.

Adsorption↗
PubMed2003

Chemically patterned, metal-oxide-based surfaces produced by photolithographic techniques for studying protein- and cell-interactions. II: Protein adsorption and early cell interactions.

Protein adsorption and adhesion of primary human osteoblasts on chemically patterned, metal-oxide-based surfaces comprising combinations of titanium, aluminium, vanadium and niobium were investigated. Single metal samples with a homogeneous surface and bimetal samples with a surface pattern produced by photolithographic techniques were used. The physical and chemical properties of the samples have been extensively characterised and are presented in a companion paper. Here, we describe their properties in terms of cell responses during the initial 24h of cell culture. Regarding the cell number and activity there was no significant difference between any of the single metal surfaces. However the morphology of cells on vanadium surfaces became spindle-like. In contrast to the behaviour on single metal samples, cells exhibited a pronounced reaction on bimetallic surfaces that contained aluminium. Cells tended to stay away from aluminium, which was the least favoured metal in all two-metal combinations. An initial cell alignment relative to the pattern geometry was detectable after 2h and was fully developed after 18h of incubation. The organisation of f-actin and microtubules as well as the localisation of vinculin were all more pronounced on non-aluminium regions. We hypothesised that the differences in cell response could be associated with differences in the adsorption of serum proteins onto the various metal oxides. Protein adsorption experiments were performed using microscopy in conjunction with immunofluorescent stains. They indicated that both fibronectin and albumin adsorption were significantly greater on the non-aluminium regions, suggesting that differences in cellular response correlate with a modulation of the concentration of serum proteins on the surface.

Adsorption↗
PubMed2002

Optical grating coupler biosensors.

By incorporating a grating in a planar optical waveguide one creates a device with which the spectrum of guided lightmodes can he measured. When the surface of the waveguide is exposed to different solutions, the peaks in the spectrum shift due to molecular interactions with the surface. Optical waveguide lightmode spectroscopy (OWLS) is a highly sensitive technique that is capable of real-time monitoring of these interactions. Since this integrated optical method is based on the measurement of the polarizability density (i.e., refractive index) in the vicinity of the waveguide surface, radioactive, fluorescent or other kinds of labeling are not required. In addition, measurement of at least two guided modes enables the absolute mass of adsorbed molecules to be determined. In this article, the technique will be described in some detail, and applications from different areas will be discussed. Selected examples will be presented to demonstrate how monitoring the modification of different metal oxides with polymers and the response of the coated oxides to biofluids help in the design of novel biomaterials; how OWLS is useful for accurate bioaffinity sensing, which is a key issue in the development of new drugs; and how the quantitative study of protein-DNA/RNA and cell surface interactions can enhance the understanding of processes in molecular and cellular biology.

Adsorption↗
PubMed2000

Feasibility study of an online toxicological sensor based on the optical waveguide technique.

Morphological properties of the cells often change as an early response to the presence of a pharmacologically acting toxic substance [Etcheverry, S.B., Crans, D.C., Keramidas, A.D., Cortizo, A.M., Arch. Biochem. Biophys. 338 (1997) 7-14]. Recently it has been shown that living animal cell adhesion and spreading can be monitored online and quantitatively via the interaction of the cells with the evanescent electromagnetic field present at the surface of an optical waveguide [Ramsden, J.J., Li, S.Y., Heinzle, E., Prinosil, J.E. Cytometry 19 (1995) 97-102]. In the present study, optical waveguide lightmode spectroscopy (OWLS) and confocal laser scanning microscopy (CLSM), which provides information about the shape of the cells at the surface, were compared under identical experimental conditions. This allowed for the correlation between the cell-shape information from CLSM and the cell-surface interaction measurements from OWLS. The proposed design of the microsystem sensor involves the establishment of a cell layer on the surface of the waveguide and the subsequent online measurement of the morphological response of the cells to various toxic substances. In the present study, the setup was evaluated using cells from an osteoblastic MC 3T3-E1 cell line, and sodium hypochlorite was used as model toxic substance. Comparing the OWLS signal to the morphological response measured by CLSM reveals that OWLS is effective in monitoring not only cell attachment and spreading but also the cellular response to toxic compounds (i.e. by means of change in cell morphology). For the model toxin, the OWLS measurements indicate that, at concentrations above 0.01%, the cells exhibit a clearly discernable morphological effect (i.e. a decrease in average cell contact area). Thus, the potential of an on-line sensor based on OWLS to applications in toxicology, pharmacy and biocompatibility was demonstrated.

3T3 Cells↗
PubMed1999

Phosphorylcholine-containing polyurethanes for the control of protein adsorption and cell attachment via photoimmobilized laminin oligopeptides.

In this study, we synthesized a biomaterial whose surface inhibits non-specific protein and cell attachment. The polymer was designed to mimic the external cell plasma membrane properties through the introduction of particular chemical constituents of the cell membrane: phospholipid polar headgroups. This was done by copolymerizing phosphorylcholine (PC) groups into a polyurethane polymer backbone (PCPUR). Peptides known to induce specific cell attachment were subsequently bound to the surface of this copolymer in a photoadressible manner to obtain surfaces that allowed the attachment of cells in a specific pattern. Two polymers with different phosphorylcholine concentrations were synthesized and their bulk and surface properties were characterized through differential scanning calorimetry, wettability measurements, angle-resolved X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry. Protein and lipid adsorption investigation using optical waveguide light mode spectroscopy showed that the irreversible adsorption of both proteins and lipids is drastically reduced as a result of simultaneous contributions of the PC groups, molecular mobility and strong hydrophilicity of the polymers. Consequently, this leads to a marked reduction in the cellular attachment response, which further decreases with increasing PC concentration. Finally, when the polymer surface was photo-derivatized, attachment of the neural NG108-15 cell line occurred only on the areas of the PCPUR where the laminin CDPGYIGSR peptide sequence was photoimmobilized. Cell attachment was nevertheless found to be non-specific with respect to the peptide sequence used and reasons for such results are therefore discussed.

Adsorption↗
PubMed1996

[Intrauterine management of Rh-alloimmunization].

The authors report the strategy of invasive management of Rh alloimmunisation in pregnancy. From the 34 pregnancies 6 were monitored by amniocenteses, 11 by fetal blood sampling, and 4 with combination of the two above mentioned diagnostic procedures. In 13 cases the fetuses were treated with intrauterine intravascular blood transfusions. All the procedures were ultrasound guided. The fetal blood sampling and the transfusions were carried out by puncturing the umbilical vein or artery. For transfusions, maternal blood was used in case of identical blood type, otherwise adult Rh negative, filtered, washed, irradiated blood was transfused. They report the complications as well, giving the cause of their fetal losses in details. There were no maternal complications observed. Out of the 34 pregnant women 25 had healthy newborns, which number is acceptable in this disease with a very high mortality rate. The authors underline that the technique of fetal blood sampling and intrauterine transfusion if needed is necessary in the management of Rh alloimmunised pregnancies.

Adult↗