Biomedical subjects

J Vasenius

Publications and source records attributed to J Vasenius.

At least 19 recordsLinked to original sources

PubMed2004

Use of bioabsorbable osteofixation devices in the hand.

Bioabsorbable internal fixation by means of pins, tacks, screws and miniplates offers an alternative to metallic osteofixation for the stabilization of small bone fractures, osteotomies, ligament injuries and fusions in the hand. The advantages of using them include avoidance of metallic-implant-related long-term complications and a secondary removal operation. Currently the most commonly used devices are made of poly L-lactide (PLLA) and copolymers of polylactides (P(L/DL)LA) and polyglycolide (PLGA). In areas of mechanical stress, the use of ultra-high-strength self-reinforced devices is recommended. Biomechanical studies on fresh frozen bones have shown that the fixation rigidity achieved with self-reinforced devices approaches that of metallic osteofixation methods. The reliability of modern implants has been confirmed in several experimental and clinical studies.

Absorbable Implants↗

PubMed2001

MR imaging in chronic rupture of the ulnar collateral ligament of the thumb.

PURPOSE: MR imaging has been shown as the best radiologic method for verifying and classifying acute ulnar collateral ligament (UCL) ruptures of the thumb. Our aim was to analyse the usefulness of MR also in old ruptures and to establish the most useful sequences. MATERIAL AND METHODS: Ten patients with an old UCL rupture of the thumb were preoperatively imaged using 1.5 T MR. Three radiologists blinded to the findings separately analysed the MR images of these patients and of 10 age-and sex-matched voluntary controls. MR findings of the patients were compared with those of surgery. RESULTS: The consensus diagnosis of an UCL rupture was accurate in all 10 patients. All controls were classified as having no UCL rupture. In 5 of the 7 patients with a surgically defined Stener or non-Stener lesion, the consensus diagnosis was the same as the operative diagnosis. Due to excessive scarring it was not possible to verify any Stener lesion intra-operatively in 3 patients. The most informative MR sequence was T2 TSE in the coronal plane, the second most informative was T1 SE with fat suppression in the coronal plane. CONCLUSION: An old UCL rupture is well verified by MR but typing of the lesion as either a Stener or non-Stener type is not always possible.

Adult↗

PubMed2001

Biodegradation and strength retention of poly-L-lactide screws in vivo. An experimental long-term study in sheep.

BACKGROUND AND AIMS: Poly-L-lactide implants have gained popularity in the fixation of fractures and osteotomies in the past decade. The aim of the present experimental long-term study was to examine the degradation and strength retention of self-reinforced poly-L-lactide (SR-PLLA) lag-screws and the bone tissue response. MATERIAL AND METHODS: A total of 27 young adult sheep were used. Self-reinforced poly-L-lactide (SR-PLLA) lag-screws of 6.3 mm were implanted in the left proximal femur of nine sheep. At two, three and five years three of the sheep were sacrificed and the degradation was studied radiologically, microradiographically and histologically. For the strength retention measurements five SR-PLLA lag-screws of 6.3 mm and five lag-screws of 4.5 mm were implanted in the subcutaneous tissue of the five sheep and lag-screws of 6.3 mm for the pull-out test in the left proximal femur of 20 sheep. At 0, 12, 18, 24, 32, and 36 weeks bending and shear strength, molecular weight and pull-out measurements were performed. RESULTS: At five years no SR-PLLA material could be seen. The implant area was surrounded by high density bone with bone ingrowth in the screw area. At 36 weeks the bending strength of the 6.3 mm screws had decreased from 257.9 MPa to 36.4 MPa and the shear strength from 131.8 MPa to 19.8 MPa. The pull-out strength of the lag-screws of 6.3 mm in diameter decreased from 1507 N to 331 N in 24 weeks. CONCLUSIONS: SR-PLLA lag-screws showed high initial values, a controlled strength retention and gradual degradation process making the use of them safe also in demanding fixations.

Absorbable Implants↗

PubMed1999

Conservative treatment of scaphoid fractures: a follow up study.

BACKGROUND AND AIMS: This investigation was made to elucidate the outcome of conservatively treated scaphoid fractures. MATERIAL AND METHODS: 63 patients with a scaphoid fracture were treated initially conservatively and examined retrospectively. The mean follow up time was 54 months. RESULTS: In this group bone union was achieved in 56 cases (89%). Three of the patients ended up to operation because of delayed union soon after conservative treatment and three nonunions were found in the follow up appointment. One fracture did not heal because of dislocation during cast treatment and was treated with operation. Incidence of osteoarthrosis and residual symptoms were studied in the group with totally conservative treatment. Osteoarthrosis was found in 19 (32%) wrists, but no correlation with wrist problems (pain, reduced grip strength or problems at work) was found. 20 (34%) of the patients complained residual symptoms. Most of the symptoms were mild and did not impair their ability to work or cause serious problems during free time. CONCLUSION: According to the present study conservative treatment is a safe method for the treatment of undislocated stabile scaphoid fractures.

Adolescent↗

PubMed1998

Initial stability of femoral neck osteosynthesis with absorbable self-reinforced poly-L-lactide (SR-PLLA) and metallic screws: a comparative study on 21 cadavers.

The initial stability of femoral neck osteosynthesis provided by three self-reinforced poly-L-lactide (SR-PLLA) or three metallic cannulated screws was compared. A standard transverse subcapital osteotomy was created with a hand saw in 19 pairs of human cadaver femora. Two fixation methods were randomly used in each pair. Fixations were exposed to a progressive cyclic loading test to determine the deflection curves, the ultimate load-carrying capacity, and the total amount of load absorbed. One pair served as a pilot and two nonoperated pairs served as controls. The positioning of the three fixation screws, whether one screw proximally and two screws distally or vice versa, provided equal stability. Metallic fixation proved to be more stable than SR-PLLA fixation as the average maximum load-carrying capacity was 3400N for the metallic and 2600N for the SR-PLLA fixation. However, SR-PLLA screws showed sufficient fixation properties for considering clinical trials in Garden I-II femoral neck fractures in well cooperative patients.

Absorption↗

PubMed1998

Redisplacement after ankle osteosynthesis with absorbable implants.

A total of 1202 fractures of the ankle were treated with absorbable implants made of polyglycolide/polylactide copolymer or self-reinforced polyglycolide and/or self-reinforced polylactide between November 5, 1984, and January 12, 1994. A redisplacement after fixation was diagnosed in 30 patients (2.5%). The redisplacement occurred in 8 of 934 (0.9%) simple ankle fractures and in 22 of 268 (8.2%) severer ankle fractures. A breakage or loosening of the absorbable implant was verified at reoperation in 8 cases and was suspected in another 9. A technical failure was the main reason in 13 cases. A reoperation was performed for 25 patients. The absorbable implants seem to provide a secure fixation in the majority of ankle fractures, but the use of these implants showed unsatisfactory results in unstable and comminuted fractures.

Absorption↗

PubMed1998

Clindamycin versus cloxacillin in the treatment of 240 open fractures. A randomized prospective study.

BACKGROUND AND AIMS: Systemic administration of antibiotics is recommended and has proved to lower infection rates in open fractures. However, no antibiotic has proved to be superior to any other. MATERIAL AND METHODS: In a prospective study 227 patients with 240 open fractures were randomized to receive either clindamycin or cloxacillin for infection prevention. RESULTS: The overall infection rate was 15%. Infection occurred in 9.3% of the clindamycin treated and in 20% of the cloxacillin treated fractures (p < 0.05). In the Gustillo Type I and II open fractures all the pathogens causing infection were gram-positive, while in the Type III open fractures 21 pathogens (57%) were gram-positive and 16 (43%) gram-negative. In the clindamycin treated fractures the infection rates in Type I and II open fractures were 3.3 and 1.8%, respectively, while in the cloxacillin group they were 20 and 3.8%, respectively. Both clindamycin and cloxacillin showed low effectiveness in the treatment of Type III open fractures, the highest infection rates being 75 and 67%, respectively (Type III B). CONCLUSIONS: Clindamycin provides good antimicrobic coverage against the most common pathogens causing Type I and II open fracture infections. In the treatment of Type III open fractures additional administration of an antibiotic with good gram-negative coverage is recommended.

Adolescent↗

PubMed1997

Comparison of the fixation of subcapital femoral neck osteotomies with absorbable self-reinforced poly-L-lactide lag-screws or metallic screws in sheep.

Seven subcapital femoral osteotomies of adult sheep were each fixed with two absorbable self-reinforced poly-L-lactide lag-screws, and seven other osteotomies were each fixed with two metallic cancellous bone screws. At 3 and 12 weeks, radiographs were taken and callus formation, displacement, and union were evaluated. At 12 weeks, the animals were killed and strength measurements were carried out. According to the radiographs, union was achieved in six of seven osteotomies in both groups, while after 3 weeks one fixation in both the group treated with absorbable screws and the group treated with metallic screws had failed. There were no statistical differences between the groups with respect to callus formation or displacement. Regarding the strength of the osteotomized bones, at 12 weeks there were no statistically significant differences in the load-carrying capacity between the bones fixed with self-reinforced poly-L-lactide screws and those fixed with metallic screws. These results showed that self-reinforced poly-L-lactide screws, which have been used successfully in fractures and osteotomies in cancellous bone, are strong enough to support this more demanding fixation of weight-bearing bones.

Animals↗

PubMed1997

Osteolytic changes after polyglycolide pin fixation in chevron osteotomy.

Absorbable polyglycolide pins were used for fixation of 94 chevron osteotomies in 70 patients at the Department of Orthopaedics and Traumatology, Helsinki University Central Hospital, between 1986 and 1992. Postoperative osteolytic changes around the degrading pin occurred in 21 of 94 (22%) metatarsal heads. In 17 of 21 metatarsal heads, polydioxanone-coated polyglycolide pins were used. This type of pin has not been used since 1988. At follow-up, 16 of 21 osteolytic changes resolved completely and four partially resolved. In the remaining one, the osteolytic area remained visible after 6 years. Cystic changes in the metatarsal head, not attributable to the location of the absorbable implants, occurred in seven (7.4%) metatarsal heads and avascular necrosis of the entire metatarsal head in one (1.1%). Foreign body reaction occurred in six (6.3%) metatarsal heads and wound infection in three (3.2%) metatarsal heads. No association was observed between osteolytic changes and foreign body reaction or infection. Osteolysis in patients receiving polyglycolide implants only require observation, because associated symptoms with the radiographic findings are transient.

Adolescent↗

PubMed1994

Absorbable self-reinforced polyglycolide (SR-PGA) screws for the fixation of fractures and osteotomies: strength and strength retention in vitro and in vivo.

The initial mechanical strength and strength retention in vitro and in vivo of novel absorbable and self-reinforced polyglycolide (SR-PGA) screws for the fixation of fractures and osteotomies were determined. The SR-PGA screws showed initial bending strength values comparable with those of yield strength of standard stainless steel. The SR-PGA screws lost all their bending and shear strengths in 6 weeks in vivo. The strength retention properties of SR-PGA screws are sufficient for safe fixation of relatively rapidly consolidating fractures and osteotomies of cancellous bone that are not exposed to hard mechanical stresses.

Animals↗

PubMed1994

The effect of osteotomy and osteosynthesis in the mandibular condyle. A radiologic and histologic study in sheep.

Eighteen oblique osteotomies in sheep mandibular condylar necks were fixed with self-reinforced poly-L-lactide (SR-PLLA) (n = 9) or stainless steel (n = 9) screws (core diameters 2.4, 2.7, 3.0, or 3.5 mm). No intermaxillary fixation (IMF) was applied. The follow-up periods were 6, 12, and 24 weeks, respectively, after which the sheep were killed, and the status of the condylar head was assessed radiographically and histologically. The results showed that the fixation had been adequate. Bony destruction, osteophytes, and flattening of the condylar head, however, were frequently observed in both groups, as compared with the unoperated contralateral condyle. Histologic studies revealed that the thickness of the condylar head cartilage had increased and that the boundaries of the different cell layers were irregular, as was the junction of cartilage and bone. The diameter of the screw did not seem to have any influence on the occurrence of either radiologic or histologic signs of condylar degeneration. These findings indicate that screw fixation of condylar fractures in the mandible without IMF might result in degenerative joint disease.

Animals↗

PubMed1993

Fixation of subcapital femoral osteotomies by poly-L-lactic acid pins. An experimental study in sheep.

In an experimental study in nine sheep, self-reinforced poly-L-lactic pins were used to fix subcapital femoral osteotomies. One out of three was consolidated at 3 weeks. At 6 weeks, one out of 3 had failed, and the other two were united by bone. At 12 weeks all the osteotomies had healed. These results showed that absorbable SR-PLLA pins could be used to fix this type of osteotomy.

Animals↗

PubMed1993

Mechanical properties of biodegradable poly-L-lactide ligament augmentation device in experimental anterior cruciate ligament reconstruction.

The mechanical properties, including maximum load, elongation, and axial rigidity, of the biodegradable poly-L-lactic acid (PLLA) ligament augmentation device were investigated, 6, 12, 24, and 48 weeks after experimental anterior cruciate ligament (ACL) repair in 32 sheep. In 16 sheep the cut ACL was removed and reconstructed with the fascia lata augmented with a braided PLLA implant 3.2 mm in diameter. In 16 sheep the ACL was cut from its midportion, sutured, and then augmented with a PLLA implant. The contralateral knee served as a control. At 6 weeks the maximum loads of the reconstructed ACL in the fascia lata-PLLA and primary suture-PLLA groups were 9% and 6%, respectively, of the contralateral ACL, but they increased with time and at 48 weeks were 21% and 12%, respectively, of the control. In the fascia lata-PLLA group the increase in maximum load was evident (P < 0.05) during the follow-up period. During the first 12 weeks the axial rigidity (expressing the elasticity of the reconstruction) was poor, especially in the high-stress region corresponding to the tensile load close to the maximum load. Thereafter the axial rigidity increased, being 48% of the control in the fascia lata-PLLA group and 29% in the primary suture-PLLA group at 48 weeks. In the low-stress region between 10 N and 100 N the increase in axial rigidity in the fascia lata-PLLA group was apparent (P < 0.05) throughout the follow-up, with values of 72% of the control in the fascia lata-PLLA and 47% in the primary suture-PLLA group at 48 weeks.(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗

PubMed1992

Intramedullary fixation of cortical bone osteotomies with self-reinforced polylactic rods in rabbits.

Osteotomies of the femoral shaft in rabbits were fixed with intramedullary rods made of poly-L-lactic acid (SR-PLLA) and poly-DL/L-lactic acid (SR-PDLLA/PLLA). Follow up was from one week to 2 years. In the PLLA group, in 37 out of 40 osteotomies the fixation was firm and the bone was united. In the PDLLA/PLLA group, the fixation was firm in 30 out of 45, but in 13 of these angular deformity of more than 10 degrees had occurred. The fixation had failed in 15. No inflammatory or foreign body reaction was seen in either group. This study demonstrates that SR-PLLA rods are suitable fixation for cortical osteotomies in rabbits.

Animals↗

PubMed1992

Do intramedullary rods of self-reinforced poly-L-lactide or poly-DL/L-lactide cause lactic acid acidosis in rabbits?

Intramedullary rods of self-reinforced poly-DL/L-lactic acid or poly-L-lactic acid were implanted in both femurs of ten rabbits for 60 weeks. Levels of arterial blood L- and D-lactate, pyruvate, pH, pCO2, base excess, standard bicarbonate, pO2 and O2-saturation were determined before implantation and 1, 3, 6, 12, 24, 36, 48 and 60 weeks after implantation. No significant increase in blood L- and D-lactate level was observed at any follow-up. Also, the blood acid-base balance remained normal throughout the study. Further studies on larger implants and on larger animals with follow-ups up to 5 years are recommended.

Acid-Base Equilibrium↗

PubMed1992

Comparison of absorbable self-reinforced multilayer poly-l-lactide and metallic plates for the fixation of mandibular body osteotomies: an experimental study in sheep.

Eighteen unfavorable transverse osteotomies were created in the mandibular body of sheep. Nine were fixed with self-reinforced poly-l-lactide and nine with metallic dynamic compression plates. Both plates were fixed with similar titanium screws. The follow-up times for radiographic, histologic, and microradiographic studies were 6, 12, and 24 weeks. With both methods, bony union with callus formation was accomplished by 6 weeks in all but one osteotomy in the metallic fixation group. There were no signs of plate failure.

Animals↗

PubMed1992

Degradation and tissue replacement of an absorbable polyglycolide screw in the fixation of rabbit femoral osteotomies.

Degradation and tissue replacement of a totally absorbable polyglycolide screw, 4.5 millimeters in diameter and thirty millimeters in length, were studied histologically, morphometrically, and radiographically at sequential stages of resorption at as long as thirty-six weeks after fixation of a transverse distal femoral osteotomy in rabbits. The initial mean shear force to failure was 95.0 newtons for the specimens that had been fixed with the polyglycolide screw compared with 257.0 newtons for the distal part of the contralateral, intact femur. The physical appearance of the screw was unaltered at three weeks. The first histological signs of degradation were seen at six weeks, along the thread ridge. Premature breakage of the screw resulted in gross displacement and non-union of the osteotomy in one animal. The degradation of polyglycolide was accompanied histologically by a typical non-specific foreign-body reaction. This kind of tissue response seemed to be associated with an osteolytic proximal expansion of the implant cavity that was suggestive of increased pressure within the cavity during degradation of the screw. In eight specimens, a wall of new bone formed around this area of osteolysis and demarcated the implant cavity from the surrounding normal cancellous bone. Seventy-four per cent of the periphery and 28 per cent of the central core of the screw had been resorbed at twelve weeks. At thirty-six weeks, no polymeric material could be discerned, and the predominant tissue component within the implant cavity was loose connective tissue. The volume fractions of trabecular bone and hematopoietic bone marrow were significantly lower (p less than 0.01) than those of the intact, control side, but the degree of restoration of tissue varied considerably from animal to animal.

Animals↗

PubMed1992

The tissue-implant interface during degradation of absorbable polyglycolide fracture fixation screws in the rabbit femur.

A transverse transcondylar osteotomy of the distal femur was fixed with an axially placed absorbable fracture fixation screw made of polyglycolide (PGA) in 25 rabbits. Changes at the tissue-implant interface accompanying degradation of the screw were examined histologically, histomorphometrically, and microradiographically seven, 20, 40, 80, and 250 days after implantation. At seven days postimplantation, a layer of fibroblasts was seen surrounding the implant, and new bone formation was discernible in the host tissues adjacent to this membranous structure. At 20 days postimplantation, the geometry of the screw was still intact and the tissue-implant boundary was distinct. The first signs of invasion of vascular granulation tissue into the implant were observed 40 days after implantation, at which time the osteotomies were united. The apparent walling-off response by formation of new trabecular bone outlining the PGA profile continued, with the greatest mean trabecular bone volume fraction at the interface, 23.9%, measured at 40 days. A significant decrease in the new bone volume occurred between 40 and 80 days postimplantation. The intensity of the foreign-body reaction seen was histologically moderate. The giant cell count was highest at 80 days postimplantation, when the migratory activity of phagocytic cells had transported intracellular particulate polymeric debris 400-800 microns away from the original tissue-implant boundary. At 250 days postimplantation, no birefringent polymeric material could be seen in the specimens. No contraindications for the clinical application of PGA implants emerged in this study.

Animals↗