PubMed Health⌕ Search

Biomedical subjects

J W Austin

Publications and source records attributed to J W Austin.

27 records · Page 2Linked to original sources

Identification, characterization, and spatial localization of two flagellin species in Helicobacter pylori flagella.

Flagellar filaments were isolated from Helicobacter pylori by shearing, and flagellar proteins were further purified by a variety of techniques, including CsCl density gradient ultracentrifugation, pH 2.0 acid disassociation-neutral pH reassociation, and differential ultracentrifugation followed by molecular sieving with a Sephacryl S-500 column or Mono Q anion-exchange column, and purified to homogeneity by preparative sodium dodecyl sulfate-polyacrylamide gel electrophoresis and transfer to an Immobilon membrane. Two flagellin species of pI 5.2 and with apparent subunit molecular weights (Mrs) of 57,000 and 56,000 were obtained. N-terminal amino acid analysis showed that the two H. pylori flagellin species were related to each other and shared sequence similarity with the N-terminal amino acid sequence of Campylobacter coli, Bacillus, Salmonella, and Caulobacter flagellins. Analysis of the amino acid composition of the predominant 56,000-Mr flagellin species isolated from two strains showed that it was comparable to the flagellins of other species. The minor 57,000-Mr flagellin species contained a higher content of proline. Immunoelectron microscopic studies with polyclonal monospecific H. pylori antiflagellin antiserum and monoclonal antibody (MAb) 72c showed that the two different-Mr flagellin species were located in different regions of the assembled flagellar filament. The minor 57,000-Mr species was located proximal to the hook, and the major 56,000-Mr flagellin composed the remainder of the filament. Western immunoblot analysis with polyclonal rabbit antisera raised against H. pylori or Campylobacter jejuni flagellins and MAb 72c showed that the 56,000-Mr flagellin carried sequences antigenetically cross-reactive with the 57,000-Mr H. pylori flagellin and the flagellins of Campylobacter species. This antigenic cross-reactivity did not extend to the flagellins of other gram-negative bacteria. The 56,000-Mr flagellin also carried H. pylori-specific sequences recognized by two additional MAbs. The epitopes for these MAbs were not surface exposed on the assembled inner flagellar filament of H. pylori but were readily detected by immunodot blot assay of sodium dodecyl sulfate-lysed cells of H. pylori, suggesting that this serological test could be a useful addition to those currently employed in the rapid identification of this important pathogen.

Amino Acid Sequence↗

Structural and chemical characterization of the S layer of a Pseudomonas-like bacterium.

Sections and freeze-fractured preparations showed an S layer on the surface of Pseudomonas-like strain EU2. Polyacrylamide gel electrophoresis of cell envelopes extracted with 1% sodium dodecyl sulfate (SDS) at room temperature showed three proteins (45K, 55K, and 110K). The 55K protein was identified as the S-layer protein. Incubation in 1.5 M guanidine hydrochloride removed the S layer from cell envelopes and dissociated the structure into subunits. The soluble 55K protein reassembled into planar sheets upon removal of the guanidine hydrochloride by dialysis. Electron microscopy and image processing indicated that these sheets had p4 symmetry in projection with a lattice constant of 13.2 +/- 0.1 nm (corresponding to 9.3 nm between adjacent fourfold axes). In some instances these reassemblies appeared to form small three-dimensional crystals which gave particularly clear views of the structure in projection because of the superimposition of information from a number of layers. A model is proposed with molecules having rounded lobes connected by a narrower linker region and joining at the lobes to form the fourfold axes of the array. The pattern superficially resembles those of other bacterial S layers, such as those of Aeromonas salmonicida, Aeromonas hydrophila, and Azotobacter vinelandii. Extraction of cell envelopes with 1% SDS at 50 degrees C released the 110K protein from the envelopes and removed an amorphous backing layer from the S layer. The 45K protein displayed heat-modifiable migration in SDS-polyacrylamide gel electrophoresis and was insoluble in SDS at 50 degrees C or in high concentrations of guanidine hydrochloride, suggesting that it was associated with the peptidoglycan.

Bacteria↗

Isolation and in vitro assembly of the components of the outer S layer of Lampropedia hyalina.

The outermost component of the S layer of Lampropedia hyalina, the punctate layer, is assembled onto an inner perforate layer. The punctate layer is composed of long, tapered cylindrical units centered on p6 symmetry axes and connected by six fine linking arms, joining at the axis of threefold symmetry to create a hexagonal layer with a lattice constant of 25.6 +/- 0.5 nm (J. A. Chapman, R. G. E. Murray, and M. R. J. Salton, Proc. R. Soc. London Ser. B 158:498-513, 1963; R. G. E. Murray, Can. J. Microbiol. 9:593-600, 1963). Extraction of cell envelopes with 100 mM Tris buffer (pH 8) containing 2% deoxycholate resulted in the release of several proteins, but left the S layers intact. The punctate layer was then extracted with 3 M guanidine hydrochloride or 6 M urea, leaving the perforate layer intact. This treatment led to the release of three polypeptides with molecular weights of 60,000, 66,000, and 240,000 (60K, 66K, and 240K polypeptides). These three polypeptides reassembled on the perforate layer as a template to form the S-layer complex or self-assembled to form the punctate layer alone after dialysis of the extract against 50 mM HEPES (N-2-hydroxyethylpiperazine-N'-2-ethanesulfonic acid) buffer (pH 7.5) containing 10 mM CaCl2. The self-assemblies were composed of a 240K polypeptide and a 60K polypeptide. The 240K and 60K polypeptides were separated by column chromatography and examined by electron microscopy. The 240K polypeptide appeared in negative stain as a long, flexible structure and assembled into loose arrays with sixfold symmetry with obvious Y-shaped linking elements, while fractions containing both the 60K and 240K polypeptides showed assemblies closely resembling the punctuate layer. Immunoelectron microscopy was used to confirm the presence of both the 60K and 240K polypeptides as components of the punctuate layer.

Cell Fractionation↗

Antigenic differences among Campylobacter fetus S-layer proteins.

Sodium dodecyl sulfate-polyacrylamide gel electrophoresis of S-layer proteins extracted from Campylobacter fetus strains by using acid glycine buffer showed that the predominant S-layer proteins of different strains had subunit molecular weights in the range of 90,000 to 140,000. Electron microscopy revealed oblique S-layer lattices with a spacing of approximately 5.6 nm (gamma = 75 degrees) on wild-type strains VC1, VC119, VC202, and VC203. Three variants of C. fetus VC119 producing a predominant S-layer subunit protein of different molecular weight (Mr) from that of the parent were also examined. Each variant produced an oblique lattice morphologically indistinguishable from that of the parent. Amino-terminal sequence analysis showed that the S-layer proteins of the VC119 parent and variants were identical up to residue 18 and that this sequence differed from but was related to the first 16 N-terminal residues shared by the S-layer proteins of the three other wild-type C. fetus isolates. Western immunoblot analysis with an antiserum prepared to the VC119 protein and an antiserum prepared to C. fetus 84-40 LP (Z. Pei, R. T. Ellison, R. V. Lewis, and M. J. Blaser, J. Biol. Chem. 263:6416-6420, 1988) showed that strains of C. fetus were capable of producing S-layer proteins with at least four different antigenic specificities. Immunoelectron microscopy with antiserum to the VC119 S-layer protein showed that C. fetus cultures contained cells with immunoreactive oblique S-layer lattices as well as cells with oblique S-layer lattices which did not bind antibody. This suggests that C. fetus S-layer proteins undergo antigenic variation. Thermal denaturation experiments indicated that the antigenicity conferred by the surface-exposed C. fetus S-layer epitopes was unusually resistant to heat, and the thermal stability appeared to be due to the highly organized lattice structure of the S. layer. Protease digestion of purified VC119 S-layer protein revealed a trypsin-, chymotrypsin-, and endoproteinase Glu-C-resistant domain with an apparent Mr of 110,000, which carried the majority of the epitopes of the S-layer protein, and a small enzyme-sensitive domain. The trypsin- and chymotrypsin-resistant polypeptides shared an overlapping sequence which differed from the N-terminal sequence of the intact S-layer protein.

Amino Acid Sequence↗

Purification, characterization, and localization of a protein antigen shared by thermophilic campylobacters.

A protein antigen with an apparent molecular weight (Mr) of 31,000 was isolated from 0.2 M glycine hydrochloride (pH 2.2) extracts of a typical human fecal isolate, Campylobacter jejuni VC74. The protein was purified to homogeneity on a preparative scale by immunoaffinity chromatography followed by molecular sieving with a Superose 12 column. Isoelectric focusing under nondenaturing conditions indicated a pI of 9.3, and amino acid composition analysis showed that the protein was unusually rich in lysine, containing 14.9 mol% of this basic amino acid. Cysteine and tryptophan were absent. The protein also contained approximately 35% hydrophobic amino acid residues, and N-terminal amino acid analysis showed that 17 of the first 38 residues were hydrophobic. This amino-terminal sequence to residue 22 was virtually identical to that of an antigenically cross-reactive 31,000-Mr protein isolated from another C. jejuni strain belonging to a different heat-labile serogroup. Western blotting (immunoblotting) of glycine extracts of other C. jejuni, Campylobacter coli, and Campylobacter laridis strains belonging to different thermolabile and thermostable serotypes, as well as Campylobacter fetus, with a rabbit polyclonal antiserum raised against the purified C. jejuni VC74 protein showed that all C. jejuni, C. coli, and C. laridis strains tested contained a 31,000-Mr protein with epitopes which were antigenically cross-reactive with the C. jejuni VC74 protein. The antigenically cross-reactive epitopes of this protein were also readily detected by immunodot blot assay of glycine extracts of C. jejuni, C. coli, and C. laridis with monospecific polyclonal antisera to the 31,000-Mr protein, suggesting that this serological test could be a useful addition to those currently employed in the rapid identification of these important pathogens. Slide agglutination reactions, immunofluorescence assay, and immunogold electron microscopy with antisera to purified 31,000-Mr protein and trypsin treatment of whole cells indicated that the cross-reactive epitopes of the 31,000-Mr protein were not exposed on the cell surface. Cell fractionation analysis and immunogold electron microscopy located the protein on the outer surface of the cytoplasmic membrane. This finding suggests that the 31,000-Mr protein is not a good candidate for inclusion in a monovalent subunit Campylobacter vaccine.

Amino Acid Sequence↗

Effect of staphylococcal alpha-hemolysin upon anion transport in the rabbit erythrocyte.

Equilibrium exchange of SO4(2-) was measured prior to and during hemolysis in rabbit erythrocytes exposed to staphylococcal alpha-hemolysin. The anion-transport protein of the rabbit erythrocyte has also been identified. Equilibrium exchange of SO4(2-) was measured by both efflux and influx of 35SO4(2-). The rate of influx of SO4(2-) in rabbit erythrocytes exposed to alpha-hemolysin was twice that of the untreated cells. The rate of SO4(2-) efflux was unchanged by alpha-hemolysin. Inhibition of anion exchange with 4,4'-diisothiocyano-2,2'-stilbenedisulfonic acid (DIDS) did not inhibit hemolysis, therefore, the increased influx of SO4(2-) may occur through a DIDS-insensitive pathway.

4,4'-Diisothiocyanostilbene-2,2'-Disulfonic Acid↗