PubMed Health⌕ Search

Biomedical subjects

J W Matthews

Publications and source records attributed to J W Matthews.

15 recordsLinked to original sources
PubMed1996

Real-time 3D dose calculation and display: a tool for plan optimization.

PURPOSE: Both human and computer optimization of treatment plans have advantages; humans are much better at global pattern recognition, and computers are much better at detailed calculations. A major impediment to human optimization of treatment plans by manipulation of beam parameters is the long time required for feedback to the operator on the effectiveness of a change in beam parameters. Our goal was to create a real-time dose calculation and display system that provides the planner with immediate (fraction of a second) feedback with displays of three-dimensional (3D) isodose surfaces, digitally reconstructed radiographs (DRRs), dose-volume histograms, and/or a figure of merit (FOM) (i.e., a single value plan score function). This will allow the experienced treatment planner to optimize a plan by adjusting beam parameters based on a direct indication of plan effectiveness, the FOM value, and to use 3D display of target, critical organs, DRRs, and isodose contours to guide changes aimed at improving the FOM value. METHODS AND MATERIALS: We use computer platforms that contain easily utilized parallel processors and very tight coupling between calculation and display. We ported code running on a network of two workstations and an array of transputers to a single multiprocessor workstation. Our current high-performance graphics workstation contains four 150-MHz processors that can be readily used in a shared-memory multithreaded calculation. RESULTS: When a 10 x 10-cm beam is moved, using an 8-mm dose grid, the full 3D dose matrix is recalculated using a Bentley-Milan-type dose calculation algorithm, and the 3D dose surface display is then updated, all in < 0.1s. A 64 x 64-pixel DRR calculation can be performed in < 0.1 s. Other features, such as automated aperture calculation, are still required to make real-time feedback practical for clinical use. CONCLUSION: We demonstrate that real-time plan optimization using general purpose multiprocessor workstations is a practical goal. Parallel processing technology provides this capability for 3D planning systems, and when combined with objective plan ranking algorithms should prove effective for optimizing 3D conformal radiation therapy. Compared to our earlier transputer work, multiprocessor workstations are more easily programmed, making software development costs more reasonable compared with uniprocessor development costs. How the dose calculation is partitioned into parallel tasks on a multiprocessor work station can make a significant difference in performance. Shared-memory multiprocessor workstations are our first choice for future work, because they require minimum programming effort and continue to be driven to higher performance by competition in the workstation arena.

Computer Graphics↗
PubMed1995

Preliminary results of a prospective trial using three dimensional radiotherapy for lung cancer.

PURPOSE: To evaluate the preliminary results of a prospective trial using three-dimensional (3D) treatment for lung cancer. METHODS AND MATERIALS: Seventy patients with inoperable Stage I through IIIB lung cancer were treated with three-dimensional thoracic irradiation with or without chemotherapy (35% received chemotherapy). Total prescribed dose to the tumor ranged from 60-74 Gy (uncorrected for lung density). All patients were evaluated for local control, survival, and development of pneumonitis. These parameters were evaluated in respect to and compared with three-dimensional parameters used in their treatment planning. RESULTS: With a minimum follow-up of 6 to 30 months, the 2-year cause-specific survival rate for Stages I and II was 90% and 53% for Stage III (no difference between Stages IIIA and IIIB). Patients with local tumor control had a better 2-year overall survival rate (47%) than those with local failure (31%). Volumetrically heterogeneously calculated doses were important to the accurate delineation of dose-volume coverage as there was a wide range of discrepancies between a homogeneously prescribed point dose calculation and the heterogeneously calculated volume coverage of that prescription. High-grade pneumonitis was correlated with the location of the tumor with lower lobe tumors having a much higher risk than those with upper lobe tumors. A critical volume effect and threshold dose were apparent in the development of high-grade pneumonitis. CONCLUSIONS: Three-dimensional therapy for lung cancer has been practically implemented at the Mallinckrodt Institute of Radiology and shows promising results in our preliminary analysis. The incidence of high-grade pneumonitis, however, warrants careful selection of patients for future dose escalation. Future dose escalation trials in lung cancer should be directed to volumes that limit the amount of elective nodal irradiation. However, the volume of necessary elective nodal irradiation remains unknown and should be studied prospectively. Dose escalation trials are indicated and may be facilitated by smaller target volumes.

Adenocarcinoma↗
PubMed1995

Three-dimensional treatment planning and conformal radiation therapy: preliminary evaluation.

Preliminary clinical results are presented for 209 patients with cancer who had treatment planned on our three-dimensional radiation treatment planning (3-D RTP) system and were treated with external beam conformal radiation therapy. Average times (min) for CT volumetric simulation were: 74 without or 84 with contrast material; 36 for contouring of tumor/target volume and 44 for normal anatomy; 78 for treatment planning; 53 for plan evaluation/optimization; and 58 for verification simulation. Average time of daily treatment sessions with 3-D conformal therapy or standard techniques was comparable for brain, head and neck, thoracic, and hepatobiliary tumors (11.8-14 min and 11.5-12.1, respectively). For prostate cancer patients treated with 3-D conformal technique and Cerrobend blocks, mean treatment time was 19 min; with multileaf collimation it was 14 min and with bilateral arc rotation, 9.8 min. Acute toxicity was comparable to or lower than with standard techniques. Sophisticated 3-D RTP and conformal irradiation can be performed in a significant number of patients at a reasonable cost. Further efforts, including dose-escalation studies, are necessary to develop more versatile and efficient 3-D RTP systems and to enhance the cost benefit of this technology in treatment of patients with cancer.

Bile Duct Neoplasms↗
PubMed1994

Three-dimensional radiation treatment planning study for patients with carcinoma of the lung.

PURPOSE: Several reports in the literature suggest that local-regional control and possibly survival could be improved for inoperable nonsmall cell lung cancer if the radiation dose to the target volume could be increased. Higher doses, however, bring with them the potential for increased side effects and complications of normal tissues. Three-dimensional treatment planning has shown significant potential for improving radiation treatment planning in several sites, both for tumor coverage and for sparing of normal tissue from high doses of radiation and, thus, has the potential of developing radiation therapy techniques that result in uncomplicated local-regional control of lung cancer. We have studied the feasibility of large-scale implementation of true three-dimensional technologies in the treatment of patients with cancers of the thorax. METHODS AND MATERIALS: CT scans were performed on 10 patients with inoperable nonsmall cell lung cancer to obtain full volumetric image data, and therapy was planned on our three-dimensional radiotherapy treatment planning system. Target volumes were determined using the new ICRU nomenclature--Gross Tumor Volume, Clinical Target Volume, and Planning Target Volume. Plans were performed according to our standard treatment policies based on traditional two-dimensional radiotherapy treatment planning methodologies and replanned using noncoplanar three-dimensional beam techniques. The results were quantitatively compared using dose-volume histograms, dose-surface displays, and dose statistics. RESULTS: Target volume delineation remains a difficult problem for lung cancer. Defining Gross Tumor Volume and Clinical Target Volume may depend on window and level settings of the three-dimensional radiotherapy treatment planning system, suggesting that target volume delineation on hard copy film is inadequate. Our study shows that better tumor coverage is possible with three-dimensional plans. Dose to critical structures (e.g., the heart) could often be reduced (or at least remain acceptable) using noncoplanar beams even with dose escalation to 75 to 80 Gy for the planning volume surrounding the Gross Target Volume. CONCLUSION: Commonly used beam arrangements for treatment of lung cancer appear to be inadequate to safely deliver tumor doses of higher than 70 Gy. Although conventional treatment techniques may be adequate for tumor coverage, they are inadequate for sparing of normal tissues when the prescription dose is escalated. The ability to use noncoplanar fields for such patients is a major advantage of three-dimensional planning. This capability led to better tumor coverage and reduced dose to critical normal tissues. However, this advantage was achieved at the expense of a greater time commitment by the treatment planning staff (particularly the radiation oncologist) and a greater complexity of treatment delivery. In summary, three-dimensional radiotherapy treatment planning appears to provide the radiation oncologist with the necessary tools to increase tumor dose, which may lead to increased local-regional control in patients with lung cancer while maintaining normal tissue doses at acceptable tolerance levels.

Carcinoma, Non-Small-Cell Lung↗
PubMed1993

Advances in 3-dimensional radiation treatment planning systems: room-view display with real time interactivity.

PURPOSE: We describe our 3-dimensional (3-D) radiation treatment planning system for external photon and electron beam 3-D treatment planning which provides high performance computational speed and a real-time display which we have named "room-view" in which the simulated target volumes, critical structures, skin surfaces, radiation beams and/or dose surfaces can be viewed on the display monitor from any arbitrary viewing position. METHODS AND MATERIALS: We have implemented the 3-D planning system on a graphics superworkstation with parallel processing. Patient's anatomical features are extracted from contiguous computed tomography scan images and are displayed as wireloops or solid surfaces. Radiation beams are displayed as a set of diverging rays plus the polygons formed by the intersection of these rays with planes perpendicular to the beam axis. Controls are provided for each treatment machine motion function. Photon dose calculations are performed using an effective pathlength algorithm modified to accommodate 3-D off-center ratios. Electron dose calculations are performed using a 3-D pencil beam model. RESULTS: Dose distribution information can be displayed as 3-D dose surfaces, dose-volume histograms, or as isodoses superimposed on 2-D gray scale images of the patient's anatomy. Tumor-control-probabilities, normal-tissue-complication probabilities and a figure-of-merit score function are generated to aid in plan evaluation. A split-screen display provides a beam's-eye-view for beam positioning and design of patient shielding block apertures and a concurrent "room-view" display of the patient and beam icon for viewing multiple beam set-ups, beam positioning, and plan evaluation. Both views are simultaneously interactive. CONCLUSION: The development of an interactive 3-D radiation treatment planning system with a real-time room-view display has been accomplished. The concurrent real-time beam's-eye-view and room-view display significantly improves the efficacy of the 3-D planning process.

Computer Systems↗
PubMed1993

Use of transputers for real time dose calculation and presentation for three-dimensional radiation treatment planning.

PURPOSE: Real-time 3-dimensional dose calculation will allow display of isodose contours and other metrics for a planner to assess plan effectiveness during plan development, facilitating optimization. METHODS AND MATERIALS: Parallel processing provides an effective means to calculate 3-dimensional dose distribution in real-time while plan parameters are being chosen and adjusted. An array of 20 transputers and a high performance graphics workstation have demonstrated the feasibility of real-time 3-dimensional beam parameter specification, dose calculation, and dose-distribution presentation for evaluation. A mesh connected set of processors using surface processors to generate and terminate rays, and ray processors to calculate ray attenuation and dose distribution has been developed to efficiently utilize large numbers of processors and provide good load sharing, even for small beams that intersect only a small part of the volume. RESULTS: Our feasibility study has calculated dose distribution by the Effective Path Length method in about one second per beam for a treatment volume of 56,400 voxels. We expect to reduce the total time for computation, communication, and display, with even larger volumes, to less than one second. The number of processors can easily be increased for larger treatment volumes or more accurate and computation-intensive dose-calculation algorithms. Transputers provide an elegant and economical method for harnessing up to hundreds of powerful general-purpose processors for computational tasks including dose calculation and isodose contour generation. The same distributed-memory parallel-processing configuration is also suitable for calculation of isodose contours and dose-volume histograms for plan evaluation, automatic calculation of apertures and filters as beam parameters are manipulated, and more accurate dose calculation algorithms that incorporate the effects of scatter. CONCLUSION: Parallel processors can efficiently provide real-time calculation of the information necessary to evaluate treatment plans as they are developed allowing the planner to optimize the plan based on dose distribution and its effects on tumor control and complications.

Humans↗
PubMed1987

State of the art of high energy photon treatment planning.

A virtual revolution in computer capability has occurred in the last few years, based largely on rapidly decreasing costs and increasing reliability of digital memory and mass-storage capability. These developments have now made it possible to consider the application of both computer and display technologies to a much broader range of problems in radiation therapy including dose computation, therapy planning and treatment verification. Various similar methods of three-dimensional dose computations in heterogeneous media capable of 2-3% accuracy are likely to be available, but significant work still remains especially for high energy X-rays where electron transport, and possibly pair production, needs to be considered. Innovative display and planning techniques are emerging and show great promise for the future. No doubt these advances will lead to substantially improved treatment planning systems in the next few years. However, it must be emphasized that for many of these applications a tremendous software and hardware development effort is required. Yet it is not clear whether the investments and efforts for improved capabilities and accuracies are warranted with respect to clinical outcome. The question must be addressed for the advancement in the practice of radiotherapy.

Humans↗
PubMed1986

Intrahypothalamic noradrenaline injection in the rat enhances operant licking but not lever pressing for milk reward.

Injection of noradrenaline into the hypothalamus of the rat produces poor performance of lever pressing for liquid food reinforcement at moderate ratio values, even though such injection facilitates intake of liquid food available without an operant requirement. The present work shows that a tube-licking operant response was more facilitated and less suppressed by noradrenaline than a lever-pressing response. Noradrenaline produced rear-limb ataxia which might have affected lever pressing more than licking, but results of manipulating the height of the tube suggested that this was unlikely. It is concluded that the operant performance deficit is more evident with lever pressing than with a response naturally involved in ingestion.

Animals↗
PubMed1985

Norepinephrine-facilitated eating: reduction in saccharin preference and conditioned flavor preferences with increase in quinine aversion.

Paraventricular (PVN) hypothalamic norepinephrine (NE) injections which facilitated feeding were nonetheless found to reduce both the unconditioned preference for saccharin and starch-conditioned preferences for almond odor and lemon taste, as well as enhancing aversion to quinine. These results add to the evidence that PVN NE elicits eating by attenuating a satiety signal.

Animals↗
PubMed1978

Factors influencing feeding elicited by intracranial noradrenaline in rats.

An improved design of microcannula was used to inject noradrenaline into discrete areas of the rat hypothalamus. The area of the paraventricular nucleus was shown to be a more effective site than the midlateral anterior hypothalamus for eliciting feeding with noradrenaline (4.8 microgram). The magnitude but not the direction of the effect of noradrenaline on feeding was influenced by the day-night cycle. The facilitating effect of the drug reached significance in the light period but not in the dark period, possibly because the baseline food intake was higher by night than by day. The facilitation of feeding occurred whether the rats were maintained and tested on a diet of solid or liquid food.

Animals↗