PubMed Health⌕ Search

Biomedical subjects

J W Weisel

Publications and source records attributed to J W Weisel.

At least 55 records · Page 3Linked to original sources
PubMed1989

Fibrinogen sialic acid residues are low affinity calcium-binding sites that influence fibrin assembly.

Calcium ions occupy low (n congruent to 10; Kd congruent to 1 mM) and high (n = 3; Kd congruent to 1 microM) affinity sites on fibrinogen and facilitate fibrin monomer polymerization. We have previously localized two of the three high affinity Ca2+ sites to gamma 311-gamma 336. However, optimal enhancement of fibrin monomer polymerization occurs only at physiological millimolar Ca2+ concentrations which are two orders of magnitude higher than the concentration required for occupancy of the high affinity Ca2+-binding sites. In this study, we show that removal of fibrinogen sialic acid residues results in loss of low affinity Ca2+-binding sites. Clotting of asialofibrinogen appears to be Ca2+-independent and results in fiber bundles thicker in diameter than normal fibrin bundles as determined by turbidometry and scanning and transmission electron microscopy. By using a Ca2+-sensitive electrode, free sialic acid is shown to bind Ca2+ (Kd congruent to 1 mM). These observations suggest that the high affinity fibrinogen D-domain Ca2+-binding sites may play a role in the tertiary structure of the D-domain, whereas, sialic acid residues are low affinity sites whose occupancy by Ca2+ at physiological calcium concentration facilitates fibrin polymerization.

Asialoglycoproteins↗
PubMed1989

Interaction of fibrinogen and its derivatives with fibrin.

The binding between complementary polymerization sites of fibrin monomers plays an essential role in the formation of the fibrin clot. One set of polymerization sites involved in the interaction of fibrin monomers is believed to pre-exist in fibrinogen, while the complementary set of binding sites is exposed after the cleavage of fibrinopeptides from fibrinogen. The polymerization sites present in fibrinogen and its derivatives mediate their binding to fibrin. Although the binding of fibrinogen and its derivatives to fibrin have been qualitatively studied, there has been no systematic, quantitative investigation of their interaction with forming or preformed clots. In the present study, the binding of fibrinogen and fragments DD, D1, and E1 was measured using a sonicated suspension of plasminogen- and thrombin-free human cross-linked fibrin as a model of a preformed clot. Dissociation constants of 0.056, 0.19, and 2.44 microM, and the number of binding sites corresponding to 0.10, 0.21, and 0.13/fibrin monomer unit of fibrin polymer were found for fibrinogen, fragment DD, and fragment D1, respectively. Fragment E1 did not bind to sonicated noncross-linked or cross-linked fibrin suspensions. However, it was bound to forming fibrin clots as well as to fibrin-Celite, suggesting that the binding sites on fibrin involved in the interaction with fragment E1 may have been altered upon sonication. Affinity chromatography of various fibrinogen derivatives on a fibrin-Celite column showed that only part of the bound fragment DD was displaced by arginine, whereas fragments D1 and E1 were completely eluted under the same conditions. The results indicate that interaction of fibrinogen with the preformed fibrin clots is characterized by affinity in the nanomolar range and that binding between fibrin monomers, in the process of clot formation, could be characterized by even a higher affinity.

Binding Sites↗
PubMed1988

Deglycosylation of fibrinogen accelerates polymerization and increases lateral aggregation of fibrin fibers.

Fibrinogen, the major structural precursor of blood clots, was deglycosylated by peptide-N-(N-acetyl-beta-glucosaminyl)asparagine amidase without denaturation of the polypeptide chains. Deglycosylated fibrinogen behaved normally in clinical coagulation assays, although it is less soluble than normal fibrinogen. However, the turbidity of clots formed from deglycosylated fibrinogen always rose faster and higher than that of clots from normal fibrinogen. Scanning and transmission electron microscopy demonstrated that fibrin made from clots of deglycosylated fibrinogen consisted of thicker, less-branched fiber bundles in a more porous network. Moreover, the degree of lateral aggregation was directly related to clot turbidity and inversely related to branching. Deglycosylation promoted turbidity development, lateral aggregation, and porosity of clots under all conditions tested. All other steps in the coagulation pathways appeared to be unaffected by the absence of carbohydrate. These results suggest that carbohydrate constitutively affects the behavior of deglycosylated fibrinogens by 1) contributing a repulsive force that promotes fibrinogen solubility and limits fibrin assembly and 2) sensitizing fibrin to conditions that influence assembly and clot structure.

Factor XII↗
PubMed1987

Involvement of the COOH-terminal portion of the alpha-chain of fibrin in the branching of fibers to form a clot.

A modified fibrinogen molecule which is missing the COOH-terminal portion of the A alpha chain has been used in structural investigations of the mechanism of assembly of the fibrin clot. Brief plasmin digestion of human fibrinogen, followed by ammonium sulfate fractionation and column chromatography, yielded a highly clottable fragment X-like preparation. Molecules in this preparation contain mostly intact B beta and gamma chains, but are missing the COOH-terminal two-thirds of the A alpha chain. Clots formed by addition of thrombin to this fragment were mechanically unstable and easily dispersed. Electron microscopy showed that the clots consist mainly of a suspension of individual fibers, in contrast to clots made from native fibrinogen, which are highly branched. It appears, therefore, that a part of the COOH-terminal two-thirds of the alpha chain is necessary for branching of fibers to form a stable three-dimensional gel. Intermolecular interactions of this portion of the alpha chain are consistent with certain of its unusual features, such as its apparent existence, in part, as a single polypeptide chain and its involvement in Factor XIIIa-mediated ligation between molecules.

Blood Coagulation↗
PubMed1987

Twisting of fibrin fibers limits their radial growth.

Electron microscopy of freeze-dried, shadowed fibrin fibers has demonstrated that these structures are twisted. The pitch and radius of many fibers were measured from the micrographs. Although there is some variability, the average pitch of 1930 +/- 280 (SD) nm is independent of radius. The distribution of observed radii of fibers assembled in vitro is highly skewed, suggesting that individual fibers grow to a maximum radius of about 50 nm, except when both pH and ionic strength are high; fibers aggregate to form thicker fiber bundles under some conditions. The observed twisting may be responsible for limiting the lateral growth of individual fibers. Protofibrils near the surface of a twisted fiber are stretched relative to those near the center. Consequently, the degree to which a protofibril can be stretched limits the radius of a fiber; protofibrils can be added to a growing fiber until the energy required to stretch an added protofibril exceeds the energy of binding. These properties of assembly arise directly from the intrinsic twist of the fibrinogen molecule determined from structural evidence. Simple geometric considerations lead to conclusions regarding the locations of the binding sites for assembly of the protofibril and the flexibility of the fibrin molecule.

Biophysical Phenomena↗
PubMed1986

Fibrin assembly. Lateral aggregation and the role of the two pairs of fibrinopeptides.

The structural basis of the wide variability of the physical properties of fibrin clots and the process of assembly of the clot were investigated by electron microscopy of fibers formed under various ionic conditions. In addition, highly specific proteolytic enzymes from different snake venoms were used to remove selectively only the A (batroxobin) or the B (venzyme) fibrinopeptides from fibrinogen, in contrast to thrombin, which removes both pairs. Fibers produced by cleavage of only the B fibrinopeptides displayed a characteristic band pattern indistinguishable from that of fibers formed upon removal of either the A fibrinopeptides alone or of both pairs. Computer modeling studies suggest that there is a unique molecular packing that gives rise to this fibrin band pattern. These findings imply that the release of either fibrinopeptide triggers similar modes of aggregation; the intermolecular binding sites can be localized to particular molecular domains. The diameters of fibers formed with each condition of enzyme, pH, salt concentration, and temperature were measured from electron micrographs. All fibers, except for those produced at both high ionic strength and pH, had about the same average diameter of 85 +/- 13 nm. The degree of lateral aggregation of the fibers themselves varied greatly, however; fibers aggregated more readily with cleavage of both pairs of fibrinopeptides and at lower pH and salt concentrations. The formation of such thick fiber bundles increases the stability of the clot and its resistance to proteolytic dissolution.

Fibrin↗
PubMed1985

A model for fibrinogen: domains and sequence.

Electron microscopy of rotary-shadowed fibrinogen demonstrates that the molecules modified for crystallization by limited cleavage with a bacterial protease retain the major features of the native structure. This evidence, together with image processing and x-ray analysis of the crystals and of fibrin, has been used to develop a three-dimensional low resolution model for the molecule. The data indicate that the two large end domains of the molecule would be composed of the carboxyl-terminus of the B beta chain (proximal) and gamma chain (distal), respectively; the carboxyl-terminus of the A alpha chain would fold back to form an additional central domain. On this basis, the carboxyl-terminal region of each of the three chains of fibrinogen is folded independently into a globular domain.

Amino Acid Sequence↗
PubMed1983

The structure of fibrinogen and fibrin: II. Architecture of the fibrin clot.

Our present low resolution model for fibrinogen based on electron microscopy and x-ray diffraction data has been described by Cohen et al. A unique aspect of the structural analysis of fibrous proteins is that the molecular packing in ordered arrays reflects biologically significant intermolecular interactions. We have shown that the orthogonal sheet microcrystals, which are closely related to fibrin, are made up of a highly regular arrangement of two-stranded protofibrils, and we have visualized aspects of both the substructure of the protofibrils as well as their packing to form the fibrin clot. By correlation of structural data with biochemical studies we have begun to identify certain functional regions of the fibrinogen model related to fibrin. Many aspects of fibrinogen's physiological activity remain to be related to its structure. As our present model is improved by higher resolution studies, we will see with increasing clarity molecular features critical for clot formation and fibrinolysis.

Computers↗
PubMed1983

Xenopus fibrinogen. Characterization of subunits and hormonal regulation of biosynthesis.

In this paper we describe the purification and characterization of Xenopus plasma fibrinogen and the hormonal factors which regulate synthesis and secretion of fibrinogen in liver parenchymal cells in primary culture. As in other vertebrate species, Xenopus fibrinogen is composed of three nonidentical polypeptide chains, A alpha, B beta, and gamma. In contrast to mammalian fibrinogens, the B beta chain of Xenopus fibrinogen has a higher apparent molecular weight than the A alpha chain. The gamma chain has the lowest molecular weight in the frog protein, as in that of other species. The relatively large size of the frog B beta chain results from the unusually large size of the NH2-terminal B fibrinopeptide, which is released by thrombin cleavage of fibrinogen. Hormonal regulation of fibrinogen biosynthesis was examined using a primary cell culture system. Purified Xenopus liver parenchymal cells, maintained for several weeks in a defined culture medium, gradually decrease the synthesis and secretion of fibrinogen. Sustained production of this protein is dependent upon the addition of a glucocorticoid, dexamethasone, to the culture medium. Fibrinogen production is suppressed if an estrogen, estradiol-17 beta, is added to the culture medium together with dexamethasone and triiodothyronine. The Xenopus system provides new insight into the structure of fibrinogen, the evolution of this protein, and the hormonal factors which regulate its synthesis.

Animals↗
PubMedDate not supplied

The electron microscope band pattern of human fibrin: various stains, lateral order, and carbohydrate localization.

Human fibrin negatively contrasted with a variety of heavy metal compounds and examined by electron microscopy displays a distinctive, nonpolar band pattern with a repeat of 22.5 nm. These results together with a reversal of contrast observed in images of positively stained fibrin, indicate that the striations reflect the protein density along the fiber. All major features of the band pattern can be accounted for directly in terms of a model for the structure of fibrinogen. Optical and computed diffraction patterns of micrographs of fibrin show that most specimens are highly ordered along the fiber axis but have only diffuse equatorial reflections arising from the average spacing of the protofibrils, although occasional fibers have discrete reflections at about 19 nm. Finally, the resulting change in negative staining pattern upon binding of lectins to the carbohydrate moieties is distinctive and allows the carbohydrate-containing beta domain of the molecule to be localized.

Fibrin↗