PubMed Health⌕ Search

Biomedical subjects

Jürgen Becker

Publications and source records attributed to Jürgen Becker.

42 records · Page 3Linked to original sources

Clinical evaluation of an Er:YAG laser combined with scaling and root planing for non-surgical periodontal treatment. A controlled, prospective clinical study.

OBJECTIVES: The purpose of the present controlled clinical trial was to compare the treatment of advanced periodontal disease with a combination of an Er:YAG laser (KEY II, KaVo, Germany) and scaling and root planing with hand instruments (SRP) to laser alone. MATERIAL AND METHODS: Twenty healthy patients with moderate to advanced periodontal destruction were randomly treated in a split-mouth design with a combination of an Er:YAG laser and SRP (test) or with laser (control) alone. The used energy setting for laser treatment was 160 mJ/pulse at a repetition rate of 10 Hz. Prior to treatment and 3, 6 and 12 months later the following parameters were evaluated by a blinded examiner: Plaque index (PI), gingival index (GI), bleeding on probing (BOP), probing depth (PD), gingival recession (GR) and clinical attachment level (CAL). Subgingival plaque samples were taken at each appointment and analysed using darkfield microscopy for the presence of cocci,-non-motile rods, motile rods and spirochetes. No statistical significant differences in any of the investigated parameters between both groups were observed at baseline. RESULTS: Initially, the plaque index was 1.0 +/- 0.6 in both groups. At the 3-month examination the plaque scores were markedly reduced and remained low throughout the study. A significant reduction of the GI and BOP occurred in both groups after 3, 6 and 12 months (P < 0.05, P < 0.05, respectively). The mean PD decreased in the test group from 5.2 +/- 0.8 mm at baseline to 3.2 +/- 0.8 mm after 12 months (P < 0.05) and in the control group from 5.0 +/- 0.7 mm at baseline to 3.3 +/- 0.7 mm after 12 months (P < 0.05). The mean CAL decreased in the test group from 6.9 +/- 1.0 mm at baseline to 5.3 +/- 1.0 mm after 12 months (P < 0.05) and in the control group from 6.6 +/- 1.1 mm at baseline to 5.0 +/- 0.7 after 12 months (P < 0.05). Both groups showed a significant increase of cocci and-non-motile rods and a decrease in the amount of motile rods and spirochetes. CONCLUSION: In conclusion, the present results have indicated that: (i) non-surgical periodontal therapy with both an Er:YAG laser + SRP and an Er:YAG laser alone may lead to significant improvements in all clinical parameters investigated, and (ii) the combined treatment Er:YAG laser + SRP did not seem to additionally improve the outcome of the therapy compared to Er:YAG laser alone.

Adult↗

Complex dewetting scenarios captured by thin-film models.

In the course of miniaturization of electronic and microfluidic devices, reliable predictions of the stability of ultrathin films have a strategic role for design purposes. Consequently, efficient computational techniques that allow for a direct comparison with experiment become increasingly important. Here we demonstrate, for the first time, that the full complex spatial and temporal evolution of the rupture of ultrathin films can be modelled in quantitative agreement with experiment. We accomplish this by combining highly controlled experiments on different film-rupture patterns with computer simulations using novel numerical schemes for thin-film equations. For the quantitative comparison of the pattern evolution in both experiment and simulation we introduce a novel pattern analysis method based on Minkowski measures. Our results are fundamental for the development of efficient tools capable of describing essential aspects of thin-film flow in technical systems.

Biomedical Engineering↗

Effects of an Er:YAG laser and the Vector ultrasonic system on the biocompatibility of titanium implants in cultures of human osteoblast-like cells.

The aim of the present study was to investigate the effects of an Er:YAG laser (ERL) and the Vector ultrasonic system (VS) on the biocompatibility of titanium implants in cultures of human osteoblast-like cells (SAOS-2). One hundred and sixty-eight titanium discs with four different surfaces (sand-blasted and acid-etched, titanium plasma-sprayed, machine-polished, and hydroxyapatite-coated) were used to evaluate cell attachment. The samples were equally and randomly assigned to the following groups: (1) an ERL at an energy level of 100 mJ/pulse and 10 Hz using a special application tip, (2) the VS using carbon fibre tips, or (3) untreated control (C). The discs were placed in culture plates, covered with a solution of SAOS-2 cells, and incubated for 7 days. The specimens were then washed with phosphate buffer to remove cells not attached to the surface, and the adherent cells were stained with hematoxilin-eosin. Cells were counted using a reflected light microscope and the cell density per mm2 was calculated. Additionally, cell morphology and surface alterations of the titanium discs after treatment were investigated using scanning electron microscopy (SEM). All titanium discs treated with ERL demonstrated nearly the same cell density per mm2 as the untreated C surfaces. There was a significant decrease in the number of cells that attached to the implant surfaces treated with VS. The SEM examination showed no visible differences between lased and C titanium surfaces. All surfaces treated with VS showed conspicuous surface damage and debris of the used carbon fibres. The results of the present study indicate that (i) ERL does not damage titanium surfaces and subsequently does not influence the attachment rate of SAOS-2 cells, and (ii) VS, used with this type of carbon fibre tip, does not seem to be suitable for the instrumentation of titanium surfaces.

Biocompatible Materials↗

Periodontal treatment with an Er:YAG laser or scaling and root planing. A 2-year follow-up split-mouth study.

BACKGROUND: Non-surgical periodontal treatment with an Er:YAG laser has been shown to result in significant clinical attachment level gain; however, clinical results have not been established on a long-term basis following Er:YAG laser treatment. Therefore, the aim of the present study was to present the 2-year results following non-surgical periodontal treatment with an Er:YAG laser or scaling and root planing. METHODS: Twenty patients with moderate to advanced periodontal destruction were treated under local anesthesia, and the quadrants were randomly allocated in a split-mouth design to either 1) Er:YAG laser (ERL) using an energy level of 160 mJ/pulse and 10 Hz, or 2) scaling and root planing (SRP) using hand instruments. The following clinical parameters were evaluated at baseline and at 1 and 2 years after treatment: plaque index (PI), gingival index (GI), bleeding on probing (BOP), probing depth (PD), gingival recession (GR), and clinical attachment level (CAL). Subgingival plaque samples were taken at each appointment and analyzed using dark-field microscopy for the presence of cocci, non-motile rods, motile rods, and spirochetes. The primary outcome variable was CAL. No statistically significant differences between the groups were found at baseline. Power analysis to determine superiority of ERL treatment showed that the available sample size would yield 99% power to detect a 1 mm difference. RESULTS: The sites treated with ERL demonstrated mean CAL change from 6.3 +/- 1.1 mm to 4.5 +/- 0.4 mm (P < 0.001) and to 4.9 +/- 0.4 mm (P < 0.001) at 1 and 2 years, respectively. No statistically significant differences were found between the CAL mean at 1 and 2 years postoperatively. The sites treated with SRP showed a mean CAL change from 6.5 +/- 1.0 mm to 5.6 +/- 0.4 mm (P < 0.001) and to 5.8 +/- 0.4 mm (P < 0.001) at 1 and 2 years, respectively. The CAL change between 1 and 2 years did not present statistically significant differences. Both groups showed a significant increase of cocci and non-motile rods and a decrease in the amount of spirochetes. However, at the 1- and 2-year examination, the statistical analysis showed a significant difference for the CAL (P < 0.001, respectively) between the 2 treatment groups. CONCLUSION: It was concluded that the CAL gain obtained following non-surgical periodontal treatment with ERL or SRP can be maintained over a 2-year period.

Aluminum Silicates↗

[Influence of an Er:YAG laser on the surface structure of titanium implants].

In addition to conventional treatment modalities (mechanical and chemical), the use of lasers has been proposed for cleaning and detoxification of implant surfaces. The aim of the present clinical investigation was (1) to evaluate the effects of an Er:YAG laser on the surface properties of titanium implants in vivo and (2) to determine the effectiveness of this treatment modality for subgingival calculus removal. This investigation was conducted on eight implants of two patients, considered for explantation due to severe peri-implantitis inflammation. Immediately before explanatation, six implants were instrumented subgingivally with an Er:YAG laser (100 mJ/pulse and 10 Hz). Two implants served as a control. All titanium implants were examined using scanning electron microscopy by one calibrated and blinded examiner. In comparison to the untreated control group, non-surgical instrumentation of titanium implants with an Er:YAG laser resulted in an effective removal of subgingival calculus without leading to any thermal damages. However, all samples of the test group revealed amounts of residual debris which should be taken into account under clinical conditions.

Decontamination↗