Biomedical subjects

Jaai Kim

Publications and source records attributed to Jaai Kim.

6 recordsLinked to original sources

PubMed2006

Optimization of adenosine 5'-triphosphate extraction for the measurement of acidogenic biomass utilizing whey wastewater.

A set of experiments was carried out to maximize adenosine 5'-triphosphate (ATP) extraction efficiency from acidogenic culture using whey wastewater. ATP concentrations at different microbial concentrations increased linearly as microbial concentration decreased. More than 50% of ATP was extracted from the sample of 39 mg volatile suspended solids (VSS)/l compared to the sample of 2.8 g VSS/l. The ATP concentrations of the corresponding samples were 0.74+/-0.06 and 0.49+/-0.05 mg/l, respectively. For low VSS concentrations ranging from 39 to 92 mg/l, the extracted ATP concentration did not vary significantly at 0.73+/-0.01 mg ATP/l. Response surface methodology with a central composite in cube design for the experiments was used to locate the optimum for maximal ATP extraction with respect to boiling and bead beating treatments. The overall designed intervals were from 0 to 15 min and from 0 to 3 min for boiling and bead beating, respectively. The extracted ATP concentration ranged from 0.01 to 0.74 mg/l within the design boundary. The following is a partial cubic model where eta is the concentration of ATP and x ( k ) is the corresponding variable term (k=boiling time and bead beating time in order): eta=0.629+0.035x (1)-0.818x (2)-0.002x (1) x (2)-0.003x (1) (2) +0.254x (2) (2) +0.002x (1) (2) x (2). This model successfully approximates the response of ATP concentration with respect to the boiling- and bead beating-time. The condition for maximal ATP extraction was 5.6 min boiling without bead beating. The maximal ATP concentration using the model was 0.74 mg/l, which was identical to the experimental value at optimum condition for ATP extraction.

Adenosine Triphosphate↗

PubMed2006

Use of real-time PCR for group-specific quantification of aceticlastic methanogens in anaerobic processes: population dynamics and community structures.

The TaqMan quantitative PCR (QPCR) method was used to detect and quantify the 16S rRNA genes of aceticlastic methanogens at different taxonomic levels. Three different sets of primers coupled with a TaqMan probe for QPCR assays to detect the 16S rRNA genes of the order Methanosarcinales, as well as the families Methanosarcinaceae and Methanosaetaceae, were separately used. Using these primer and probe sets, the 16S rRNA genes of aceticlastic methanogens in samples from various anaerobic processes (i.e., nine pure cultures, batch experiment, and three different continuous processes including a full-scale digester), were monitored and quantified by QPCR assays. A batch experiment cultivating a mixture of aceticlastic methanogens, was conducted to monitor their population dynamics. Using this group-specific quantification method, the dynamics of a competition between two aceticlastic populations, as modulated by the acetate concentration, could well be described. The target 16S rRNA genes in environmental samples, collected from three different anaerobic processes treating sludge, cheese whey, and synthetic wastewaters, were additionally quantified. The quantified 16S rRNA gene concentrations for all samples successfully represented the community structures of the target methanogens, which were correlated accurately with the operational parameters of the anaerobic processes. It was also successful to demonstrate probe nesting of aceticlastic methanogens at the levels of order and family.

Acetates↗

PubMed2006

Absolute and relative QPCR quantification of plasmid copy number in Escherichia coli.

Real-time QPCR based methods for determination of plasmid copy number in recombinant Escherichia coli cultures are presented. Two compatible methods based on absolute and relative analyses were tested with recombinant E. coli DH5alpha harboring pBR322, which is a common bacterial cloning vector. The separate detection of the plasmid and the host chromosomal DNA was achieved using two separate primer sets, specific for the plasmid beta-lactamase gene (bla) and for the chromosomal d-1-deoxyxylulose 5-phosphate synthase gene (dxs), respectively. Since both bla and dxs are single-copy genes of pBR322 and E. coli chromosomal DNA, respectively, the plasmid copy number can be determined as the copy ratio of bla to dxs. These methods were successfully applied to determine the plasmid copy number of pBR322 of E. coli host cells. The results of the absolute and relative analyses were identical and highly reproducible with coefficient of variation (CV) values of 2.8-3.9% and 4.7-5.4%, respectively. The results corresponded to the previously reported values of pBR322 copy number within E. coli host cells, 15-20. The methods introduced in this study are convenient to perform and cost-effective compared to the traditionally used Southern blot method. The primer sets designed in this study can be used to determine plasmid copy number of any recombinant E. coli with a plasmid vector having bla gene.

Algorithms↗

PubMed2005

Group-specific primer and probe sets to detect methanogenic communities using quantitative real-time polymerase chain reaction.

Real-time polymerase chain reaction (PCR) is a highly sensitive method that can be used for the detection and quantification of microbial populations without cultivating them in anaerobic processes and environmental samples. This work was conducted to design primer and probe sets for the detection of methanogens using a real-time PCR with the TaqMan system. Six group-specific methanogenic primer and probe sets were designed. These sets separately detect four orders (Methanococcales, Methanobacteriales, Methanomicrobiales, and Methanosarcinales) along with two families (Methanosarcinaceae and Methanosaetaceae) of the order Methanosarcinales. We also designed the universal primer and probe sets that specifically detect the 16S rDNA of prokaryotes and of the domain Bacteria and Archaea, and which are fully compatible with the TaqMan real-time PCR system. Target-group specificity of each primer and probe set was empirically verified by testing DNA isolated from 28 archaeal cultures and by analyzing potential false results. In general, each primer and probe set was very specific to the target group. The primer and probe sets designed in this study can be used to detect and quantify the order-level (family-level in the case of Methanosarcinales) methanogenic groups in anaerobic biological processes and various environments.

DNA Primers↗

PubMed2003

Isolation and identification of thiocyanate utilizing chemolithotrophs from gold mine soils.

A mixed bacterial culture capable of growing in potassium-thiocyanate containing medium (200 mg KSCN) has been isolated from bacterial suspensions of soil samples collected near gold mines in Kumjung (Korea). The isolates were initially characterized by metabolic profile analysis and were identified as Bacillus thermoglucosidasius, Bacillus cereus, Bacillus licheniformis, Bacillus mycoides, Brevibacterium epidermidis, Brevibacterium otitidis, and Corynebacterium nitrilophilus. One of the seven isolates was initially characterized as Brevibacterium epidermidis, which is not known to degrade thiocyanate. However, using 16S rDNA sequencing, this strain was identified as a member of Klebsiella. The strain shows high similarity values (95.8 to 96.4%) with Klebsiella species, and the closest known relative was found to be K. ornithinolytica ATCC 31898. The result indicates that species of the genus Klebsiella were the closest phylogenetic relatives of the investigated strain. This is the first known report of a member of Klebsiella that is capable of utilizing thiocyanate as sole source of carbon and nitrogen.

Bacillus↗

PubMedDate not supplied

Biokinetic evaluation and modeling of continuous thiocyanate biodegradation by Klebsiella sp.

Biokinetics for autotrophic degradation of thiocyanate using batch culture of Klebsiella sp. were evaluated both analytically and numerically. A sequential approach with an analytical method followed by a numerical approximation was used to evaluate and to ensure the accuracy of the parameter estimation. The nonlinear least-squares method with a 95% confidence interval was employed. The growth conditions were maintained at pH 7 and 38 degrees C for all experiments. With an automated incubation and turbidity reader, a total of 16 different initial thiocyanate concentrations, ranging from 10 to 300 mg L(-1), were used to develop a kinetic expression of specific growth rate as a function of substrate concentration. The biodegradation of thiocyanate with Klebsiella sp. followed a substrate inhibition pattern. Three identical automated bioreactors with working volumes of 1.5 L, equipped with sterilizable sampling ports, were also used for the numerical approximation of the biokinetic parameters in batch mode. A fourth order Runge-Kutta method was used to approximate the substrate inhibition kinetics of the Klebsiella sp. utilizing thiocyanate. Although the kinetic coefficients estimated by analytical and numerical methods were not statistically different at a 0.05 alpha level, model responses of numerical approximation generated a better prediction of changes in thiocyanate and cell mass concentrations. The hypothetical maximum growth rate, micro m, half saturation coefficient, Ks, microbial yield coefficient, Y, cell mass decay rate coefficient, kd, and substrate inhibition coefficient, Ksi, were evaluated as being 0.62 +/- 0.05 d(-1), 85 +/- 8 mg SCN- L(-1), 0.076 +/- 0.011 mg cell mass (mg SCN)(-1), 0.03 +/- 0.002 d(-1), and 131 +/- 22 mg SCN- L(-1), respectively. The calculated maximal substrate concentration, Sm, and apparent maximum specific growth rate, micro'm, were 105.5 +/- 8.7 mg SCN- L(-1) and 0.24 +/- 0.01 d(-1), respectively. Using these estimated parameters, the theoretical performance of the continuous operation was also illustrated, which depicts the residual thiocyanate and Klebsiella sp. concentrations in the non-steady and steady states at different hydraulic retention times (HRTs). Assuming the influent concentration of 250 mg SCN- L(-1), the expected treatment efficiency ranged from 94.9% to 69.4% between 20 and 5 days HRT, respectively. Klebsiella sp. was expected to be washed out at 4.8 days HRT, thus resulting in no treatment of thiocyanate.

Hydrolysis↗