Biomedical subjects

Jacques Berthelin

Publications and source records attributed to Jacques Berthelin.

5 recordsLinked to original sources

PubMed2006

Evaluation of matrices for the sorption and biodegradation of phenanthrene.

Permeable reactive barriers (PRBs), a new cost effective technology for the remediation of contaminated groundwater, have rarely been considered for PAH contamination. We evaluated three candidate matrices (activated carbon (AC), pouzzolana coated (PzF) or not (Pz) with heavy fuel oil) for phenanthrene (PHE) sorption capacity and the biodegradation of adsorbed PHE. Adsorption-desorption batch experiments showed higher sorption capacity of AC than PzF (60 fold) and Pz (1,500 fold). Sorption isotherms were not linear for all matrices as described by a Freundlich model. Phenanthrene desorption from AC and PzF within 48 h was limited (1-3%). Mineralization of (14)C-PHE by a PAH-degrading bacterial strain increased in the presence of AC and Pz (+16 and +12%). Among the three matrices, AC may be a good candidate for PRBs due to high adsorption, low desorption and increased PHE degradation.

Adsorption↗

PubMed2006

Stabilization of the initial electrochemical potential for a metal-based potentiometric titration study of a biosorption process.

An interactive metal-based potentiometric titration method has been developed using an ion selective electrode for studying the sorption of metal cations. The accuracy of this technique was verified by analyzing the metal sorption mechanism for the biomass of Rhizopus arrhizus fungus and diatomite, two dissimilar materials (organic and mineral, strong sorbent and weak sorbent) of a different order of cation exchange capacity. The problem of the initial electrochemical potential was addressed identifying the usefulness of a Na-sulfonic resin as a strong chelating agent applied before the beginning of sorption titration experiments so that the titration curves and the sorption uptake could be quantitatively compared. The resin stabilized the initial electrochemical potential to -405+/-5 mV corresponding to 2 micro gl(-1) of lead concentration in solution. The amounts of lead sorbed by R. arrhizus biomass and diatomite were 0.9 mmol g(-1) (C(e)=5.16 x 10(-2)mM) and 0.052 mmol g(-1) (C(e)=5.97 x 10(-2) mM), respectively. Lead sorption by the fungal biomass was pinpointed to at least two types of chemical active sites. The first type was distinguished by high reactivity and a low number of sites whereas the other was characterized by their higher number and lower reactivity.

Adsorption↗

PubMed2005

EPR monitoring of the bioavailability of an organic xenobiotic (4-hydroxy-TEMPO) in model clay suspensions and pastes.

Electron paramagnetic resonance spectroscopy is used to monitor the bioavailability of a nitroxide spin probe, 4-hydroxy-Tempo or Tempol, in Ca-hectorite suspensions and pastes, to bacteria capable of degrading this probe co-metabolically. In nutrient solutions with an initial probe concentration of 1.2 mM and in the absence of hectorite, bacteria are able to denature Tempol and eliminate its paramagnetic signal within 48 h. In the presence of hectorite and after flocculation, the effect of bacteria is significantly delayed, but almost complete denaturation still occurs, after roughly 120 h. When hectorite is added but the bacterial/clay suspension is not centrifuged, Tempol denaturation levels off after about 24 h and reaches a plateau with approximately 45% of Tempol remaining. This plateau does not constitute evidence of limited bioavailability, as is widely assumed, since subsequent addition of nutrients causes the denaturation reaction to proceed to a second plateau, with merely 10% of Tempol remaining.

Aluminum Silicates↗

PubMed2005

Lead biosorption study with Rhizopus arrhizus using a metal-based titration technique.

Acid-base and metal-based potentiometric titration methods were used to analyze sorption mechanisms of lead by Rhizopus arrhizus fungal biomass. Biosorption was not considered globally but as the result of successive sorption reactions on various binding sites with different selectivities. Precipitation occurred rapidly when lead concentration increased. Lead was sorbed essentially by carboxylic groups and by phosphates and sulfonates (less abundant) of the organic matter. The lead affinity to carboxylic, sulfonate and phosphate binding sites depended on the association coefficient with proton or counter-ion and on the spatial distribution of the surface sites promoting the formation of mono- or bi-dentate complexes. Chemical bonds and binding sites were confirmed using microscopic and spectroscopic techniques (IR, MET-EDAX). It appeared that although the total organic acidity was reached, number of ionized and free carboxylic groups were not involved in lead sorption reactions. In spite of lead speciation in the solution, surface micro-precipitation was observed and the two processes, surface adsorption and micro-precipitation, are sequential and possibly overlapping. At low concentrations (<10(-6) M) adsorption is the dominant phenomenon and beyond (>10(-5) M) surface clusters appeared before the predicted solution precipitation phenomenon.

Adsorption↗

PubMed2004

A high-resolution titrator: a new approach to studying binding sites of microbial biosorbents.

The high-resolution potentiometric titration was used as a physico-chemical method to study the acid properties of selected biosorbent materials in order to quantify the functional acidic groups for sorption and to determine their affinities by considering their partial or total ionization equilibrium reactions. The Gran's method and the Henderson-Hasselbach's equation were employed in establishing the partition of the total acidity as associated with strong, weak and very weak acidic chemical active groups. The differences in the total organic acidity (A(TO)) for the two selected types of bacteria and two mycelia revealed by this method were explained by the chemical composition of their cell walls. The total organic acidities obtained were 3.87 me g(-1) for Thiobacillus ferrooxidans, 1.31 me g(-1) for Corynebacterium glutamicum, 0.81 me g(-1) for Aspergillus niger and 2.54 me g(-1) for Rhizopus arrhizus. The links between the activity of protons and the sorption capacities of the selected bioorganic matters were established. Sorption of lead by C. glutamicum and R. arrhizus biomass indicated an optimum pH of 6. It appeared that 64% (Pb(uptake)=0.48 me g(-1)) and 38% (Pb(uptake)=0.28 me g(-1)) of A(TO) were involved during lead sorption onto R. arrhizus and C. glutamicum, respectively. The applications of titration techniques become a powerful tool for the characterization of heterogeneous materials involved in biosorption and bioremediation processes.

Aspergillus niger↗