On the species involved in the vaporization of imidazolium ionic liquids in a steam-distillation-like process.
Explore the source record for details and available documents.
Journal Article↗
Biomedical subjects
Jairton Dupont
Publications and source records attributed to Jairton Dupont.
Synthesis and characterization of Pt0 nanoparticles in imidazolium ionic liquids.
The controlled decomposition of Pt2(dba)3 (dba = dibenzylideneacetone) dispersed in 1-n-butyl-3-methylimidazolium tetrafluoroborate (BMI.BF4) and hexafluorophosphate (BMI.PF6) ionic liquids in the presence of cyclohexene by molecular hydrogen produces Pt0 nanoparticles. The formation of these nanoparticles follows the two-step [A --> B, A + B --> 2B (k1, k2)] autocatalytic mechanism. The catalytic activity in the hydrogenation of cyclohexene is influenced by the nature of the anion rather than the mean-diameter of the nanoparticles. Thus, higher catalytic activity was obtained with Pt0 dispersed in BMI.BF4 containing the less coordinating anion although these nanoparticles possess a larger mean diameter (3.4 nm) than those obtained in BMI.PF6 (2.3 nm). Similar mean diameter values were estimated from in situ XRD and SAXS. XPS analyses clearly show the interactions of the ionic liquid with the metal surface demonstrating the formation of an ionic liquid protective layer surrounding the platinum nanoparticles. SAXS analysis indicated the formation of a semi-organized ionic liquid layer surrounding the metal particles with an extended molecular length of around 2.8 nm in BMI.BF4 and 3.3 nm in BMI.PF6.
Journal Article↗
Synthesis and characterization of catalytic iridium nanoparticles in imidazolium ionic liquids.
The reduction of [Ir(cod)Cl](2) (cod=1,5-cyclooctadiene) dissolved in 1-n-butyl-3-methyl tetrafluoroborate, hexafluorophosphate and trifluoromethane sulphonate ionic liquids in the presence of 1-decene by molecular hydrogen produces Ir(0) nanoparticles. The formation of these nanoparticles follows the two-step [A-->B, A+B-->2B (k(1),k(2))] autocatalytic mechanism. The same mean diameter values of around 2-3 nm were estimated from in situ TEM and SAXS analyses of the Ir(0) nanoparticles dispersed in the ionic liquids and by XRD of the isolated material. XPS and EXAFS analyses clearly show the interactions of the ionic liquid with the metal surface demonstrating the formation of an ionic liquid protective layer surrounding the iridium nanoparticles. SAXS analysis indicated the formation of an ionic liquid layer surrounding the metal particles with an extended molecular length of around 2.8-4.0 nm depending on the type of the anion.
Journal Article↗
Physico-chemical processes in imidazolium ionic liquids.
Among the various properties exhibited by ionic liquids (ILs)--especially those based on the imidazolium cation-their inherent ionic patterns, very low vapour pressure and pronounced self-organization in the solid, liquid and even in the gas phase are particularly interesting since this allows the use of these fluids as alternative and complementary media to classical organic solvents and water in many applications. Hence, reaction paths that involve charge-separated intermediates or transition states are accelerated--by lowering the activation barrier-in the presence of ILs when compared with those performed in classical organic solvents. It is also possible, for example, to observe, by electrochemical methods, transient species (ionic and radical) that are otherwise undetectible in water or in molecular organic solvents and to investigate the interactions and behaviour of molecular, biological and macromolecular species in solution using physical and chemical methods which require special conditions such as high-vacuum, and which have been traditionally limited to solid state chemistry.
Journal Article↗
Statistical design of experiments as a tool for optimizing the batch conditions to Cr(VI) biosorption on Araucaria angustifolia wastes.
In order to reduce the total number of experiments for achieving the best conditions for Cr(VI) uptake using Araucaria angustifolia (named pinhão) wastes as a biosorbent, three statistical design of experiments were carried out. A full 2(4) factorial design with two blocks and two central points (20 experiments) was experimented (pH, initial metallic ion concentration-C(o), biosorbent concentration-X and time of contact-t), showing that all the factors were significant; besides, several interactions among the factors were also significant. These results led to the performance of a Box-Behnken surface analysis design with three factors (X, C(o) and t) and three central points and just one block (15 experiments). The performance of these two statistical designs of experiments led to the best conditions for Cr(VI) biosorption on the pinhão wastes using a batch system, where: pH 2.0; C(o) = 1200 mg l(-1) Cr(VI); X = 1.5 g l(-1) of biosorbent; t = 8 h. The maximum Cr(VI) uptake in these conditions was 125 mg g(-1). After evaluating the best Cr(VI) biosorption conditions on pinhão wastes, a new Box-Behnken surface analysis design was employed in order to verify the effects of three concomitant ions (Cl(-), NO(3)(-) and PO(4)(3-)) on the biosorption of Cr(VI) as a dichromate on the biosorbent (15 experiments). These results showed that the tested anions did not show any significant effect on the Cr(VI) uptake by pinhão wastes. In order to evaluate the pinhão wastes as a biosorbent in dynamic system, a glass column was fulfilled with pinhão wastes (4.00 g) as biosorbent, and it was fed with 25.0 mg l(-1) Cr(VI) at pH 2.0 and 2.5 ml min(-1). The breakpoint was attained when concentrations of effluent of the column attained the value of 0.05 mg l(-1) Cr(VI) using 5550 ml of the metallic ion solution. In these conditions, the biosorbent was able to remove completely Cr(VI) from aqueous solution with a ratio of Cr(VI) effluent volume/biosorbent volume of 252.3.
Adsorption↗
Kinetics and mechanistic aspects of the Heck reaction promoted by a CN-palladacycle.
In the Heck reaction between aryl halides and n-butyl acrylate, the palladacycle {Pd[kappa(1)-C, kappa(1)-N-C=(C(6)H(5))C(Cl)CH(2)NMe(2)](mu-Cl)}(2), 1, is merely a reservoir of the catalytically active Pd(0) species [1](Pd colloids or highly active forms of low ligated Pd(0) species) that undergoes oxidative addition of the aryl halide on the surface with subsequent detachment, generating homogeneous Pd(II) species. The main catalytic cycle is initiated by oxidative addition of iodobenzene to [1], followed by the reversible coordination of the olefin to the oxidative addition product. All the unimolecular subsequent steps are indistinguishable kinetically and can be combined in a single step. This kinetic model predicts that a slight excess of alkene relative to iodobenzene leads to a rapid rise in the Pd(0) concentration while when using a slight excess of iodobenzene, relative to alkene, the oxidative addition product is the resting state of the catalytic cycle. Competitive experiments of various bromoarenes and iodoarenes with n-butyl acrylate catalyzed by 1 and CS, CP, and NCN palladacycles gave the same rho value (2.4-2.5 for Ar-Br and 1.7-1.8 for Ar-I) for all palladacycles employed, indicating that they generate the same species in the oxidative addition step. The excellent fit of the slope with the sigma(0) Hammett parameter and the entropy of activation of -43 +/- 8 J mol(-1) K(-1) are consistent with an associative process involving the development of only a partial charge in the transition state for the oxidative step of iodobenzene.
Journal Article↗
Laser-induced fragmentation of transition metal nanoparticles in ionic liquids.
Stable Pd(0) and Rh(0) nanoparticles with small and narrow size distribution can be prepared from relative large and agglomerated transition-metal particles dispersed in 1-n-butyl-3methylimidazolium hexafluorophosphate ionic liquid by simple laser irradiation. The laser irradiation is a complementary method for the generation of stable metal colloids in ionic liquids and also for the regeneration of small-size nanoparticles that may result from their agglomeration after different applications.
Journal Article↗
Identification of 1,3-dialkylimidazolium salt supramolecular aggregates in solution.
The nature of the interactions between 1,3-dialkylimidazolium cations and noncoordinating anions such as tetrafluoroborate, hexafluorophosphate, and tetraphenylborate has been studied in the solid state by X-ray diffraction analysis and in solution by (1)H NMR spectroscopy, conductivity, and microcalorimetry. In the solid state, these compounds show an extended network of hydrogen-bonded cations and anions in which one cation is surrounded by at least three anions and one anion is surrounded by at least three imidazolium cations. In the pure form, imidazolium salts are better described as polymeric supramolecules of the type {[(DAI)(3)(X)](2+)[(DAI)(X)(3)](2-)}(n) (where DAI is the dialkylimidazolium cation and X is the anion) formed through hydrogen bonds of the imidazolium cation with the anion. In solution, this supramolecular structural organization is maintained to a great extent, at least in solvents of low dielectric constant, indicating that mixtures of imidazolium ionic liquids with other molecules can be considered as nanostructured materials. This model is very useful for the rationalization of the majority of the unusual behavior of the ionic liquids.
Journal Article↗
The role of Pd nanoparticles in ionic liquid in the Heck reaction.
Pd(0) nanoparticles with approximately 2 nm diameter, immobilized in 1-n-butyl-3-methylimidazolium hexafluorophosphate ionic liquid, are efficient catalyst precursors for coupling of aryl halides with n-butylacrylate. In situ TEM analysis of the ionic liquid catalytic solution after the catalytic reaction shows the formation of larger nanoparticles ( approximately 6 nm). The palladium content in the organic phase during the arylation reaction was checked by ICP-AS and shows significant metal leaching (up 34%) from the ionic phase to the organic phase at low substrate conversions and drops to 5-8% leaching at higher conversions. These results strongly suggest that the Pd(0) nanoparticles serve as a reservoir of "homogeneous" catalytic active species.
Journal Article↗
The potential of palladacycles: more than just precatalysts.
Explore the source record for details and available documents.
Catalysis↗
Gaseous supramolecules of imidazolium ionic liquids: "magic" numbers and intrinsic strengths of hydrogen bonds.
Electrospray ionization mass spectrometry (ESI-MS) is found to gently and efficiently transfer small to large as well as singly to multiply charged [X+]n[A-]m supramolecules of imidazolium ion (X+) ionic liquids to the gas phase, and to reveal "magic numbers" for their most favored assemblies. Tandem mass spectrometric experiments (ESI-MS/MS) were then used to dissociate, via low-energy collision activation, mixed and loosely bonded [A- - - -X- - - -A']- and [X- - - -A- - - -X']+ gaseous supramolecules, as well as their higher homologues, and to estimate and order via Cooks' kinetic method (CKM) and B3LYP/6-311G(d,p) calculations the intrinsic solvent-free magnitude of hydrogen bonds. For the five anions studied, the relative order of intrinsic hydrogen-bond strengths to the 1-n-butyl-3-methylimidazolium ion [X1]+ is: CF3CO2- (zero) > BF4- (-3.1) > PF6- (-10.0) > InCl4- (-16.4) and BPh4- (-17.6 kcal mol(-1)). The relative hydrogen-bond strength for InCl4- was measured via CKM whereas those for the other anions were calculated and used as CKM references. A good correlation coefficient (R=0.998) between fragment ion ratios and calculated hydrogen-bond strengths and an effective temperature (Teff) of 430 K demonstrate the CKM reliability for measuring hydrogen-bond strengths in gaseous ionic liquid supramolecules. Using CKM and Teff of 430 K, the intrinsic hydrogen-bond strengths of BF4- for the three cations investigated is: 1-n-butyl-3-methyl-imidazolium ion (0) > 1,3-di-[(R)-3-methyl-2-butyl]-imidazolium ion (-2.4) > 1,3-di-[(R)-alpha-methylbenzyl]-imidazolium ion (-3.0 kcal mol(-1)). As evidenced by "magic" numbers, greater stabilities are found for the [(X1)2(BF4)3]- and [(X1)5A4]+ supramolecules (A not equal InCl4-).
Journal Article↗
Microwave activation in ionic liquids induces high temperature-high speed electrochemical processes.
Self-focusing of intense microwave radiation at the tip of a 25 microm diameter platinum disk microelectrode immersed into the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM(+)PF(6)(-)) containing 1 mM ferrocene causes dramatically (two orders of magnitude) enhanced voltammetric current signals and temperatures in excess of 600 K (at the electrode surface)--extreme conditions sufficient for condensed phase pyrolysis processes to occur.
Journal Article↗
On the noninnocent nature of 1,3-dialkylimidazolium ionic liquids.
Explore the source record for details and available documents.
Journal Article↗
The partial hydrogenation of benzene to cyclohexene by nanoscale ruthenium catalysts in imidazolium ionic liquids.
The controlled decomposition of an Ru(0) organometallic precursor dispersed in 1-n-butyl-3-methylimidazolium hexafluorophosphate (BMI.PF(6)), tetrafluoroborate (BMI.BF(4)) or trifluoromethane sulfonate (BMI.CF(3)SO(3)) ionic liquids with H(2) represents a simple and efficient method for the generation of Ru(0) nanoparticles. TEM analysis of these nanoparticles shows the formation of superstructures with diameters of approximately 57 nm that contain dispersed Ru(0) nanoparticles with diameters of 2.6+/-0.4 nm. These nanoparticles dispersed in the ionic liquids are efficient multiphase catalysts for the hydrogenation of alkenes and benzene under mild reaction conditions (4 atm, 75 degrees C). The ternary diagram (benzene/cyclohexene/BMI.PF(6)) indicated a maximum of 1 % cyclohexene concentration in BMI.PF(6), which is attained with 4 % benzene in the ionic phase. This solubility difference in the ionic liquid can be used for the extraction of cyclohexene during benzene hydrogenation by Ru catalysts suspended in BMI.PF(6). Selectivities of up to 39 % in cyclohexene can be attained at very low benzene conversion. Although the maximum yield of 2 % in cyclohexene is too low for technical applications, it represents a rare example of partial hydrogenation of benzene by soluble transition-metal nanoparticles.
Journal Article↗
A new totally flat N(sp(2))C(sp(2))N(sp(2)) pincer palladacycle: synthesis and photoluminescent properties.
The Sonogashira coupling of 2-bromopyridine with 8-quinolinyl-acetylene affords 2-pyridinyl-8-quinolinyl-acetylene (1) in high yields. The chloropalladation of 1 with Li(2)PdCl(4) in methanol at room temperature affords the pincer palladacycle (C(5)H(4)N-2-C=C(Cl)-8-C(9)H(6)kappaN,kappaC,kappaN)PdCl (2) in 63% yield. The X-ray molecular structure of (2) shows that it is totally flat and that it is associated in pairs though pi-stacking between alternate pyridine-quinoline moieties (3.448 A). The pairs are also connected by pi-stacking with an interpair distance of 3.452 A between quinoline-quinoline moieties. A very low fluorescence emission was also revealed by the pincer palladacycle 2 in both solution and the solid state, which has been ascribed to an excimeric emission due to the particular structure (rigid and totally flat) of 2 in the solid state.
Journal Article↗
Nanoscale Pt(0) particles prepared in imidazolium room temperature ionic liquids: synthesis from an organometallic precursor, characterization, and catalytic properties in hydrogenation reactions.
The reaction of Pt(2)(dba)(3) (dba = bis-dibenzylidene acetone) dispersed in room temperature 1-n-butyl-3-methylimidazolium (BMI) hexafluorophosphate ionic liquid with molecular hydrogen (4 atm) at 75 degrees C leads to stable and isolable nanometric Pt(0) particles. The X-ray diffraction analysis (XRD) of the material indicated that it is constituted of Pt(0). Transmission electron microscopy (TEM) analysis of the particles dispersed in the ionic liquid shows the formation of [Pt(0)](n) nanoparticles of 2.0-2.5 nm in diameter. A detailed examination of the nanoparticles imbibed in the ionic liquid and their environment shows an interaction of the BMI.PF(6) ionic liquid with the Pt(0) nanoparticles. The isolated [Pt(0)](n) nanoparticles can be redispersed in the ionic liquid or in acetone or used in solventless conditions for liquid-liquid biphasic, homogeneous, or heterogeneous hydrogenation of alkenes and arenes under mild reaction conditions (75 degrees C and 4 atm). The recovered platinum nanoparticles can be reused as a solid or redispersed in the ionic liquid several times without any significant loss in catalytic activity.
Journal Article↗
The use of imidazolium ionic liquids for the formation and stabilization of ir0 and rh0 nanoparticles: efficient catalysts for the hydrogenation of arenes.
Stable transition-metal nanoparticles of the type [M(0)](n) are easily accessible through the reduction of Ir(I) or Rh(III) compounds dissolved in "dry" 1-n-butyl-3-methylimidazolium hexafluorophosphate ionic liquid by molecular hydrogen. The formation of these [M(0)](n) nanoparticles is straightforward; they are prepared in dry ionic liquid whereas the presence of the water causes the partial decomposition of ionic liquid with the formation of phosphates, HF and transition-metal fluorides. Transmission electron microscopy (TEM) observations and X-ray diffraction analysis (XRD) show the formation of [Ir(0)](n) and [Rh(0)](n) nanoparticles with 2.0-2.5 nm in diameter. The isolated [M(0)](n) nanoparticles can be redispersed in the ionic liquid, in acetone or used in solventless conditions for the liquid-liquid biphasic, homogeneous or heterogeneous hydrogenation of arenes under mild reaction conditions (75 degrees C and 4 atm). The recovered iridium nanoparticles can be reused several times without any significant loss in catalytic activity. Unprecedented total turnover numbers (TTO) of 3509 in 32 h, for arene hydrogenation by nanoparticles catalysts, have been achieved in the reduction of benzene by the [Ir(0)](n) in solventless conditions. Contrarily, the recovered Rh(0) nanoparticles show significant agglomeration into large particles with a loss of catalytic activity. The hydrogenation of arenes containing functional groups, such as anisole, by the [Ir(0)](n) nanoparticles occurs with concomitant hydrogenolysis of the C-O bond, suggesting that these nanoparticles behave as "heterogeneous catalysts" rather than "homogeneous catalysts".
Journal Article↗
Transition-metal nanoparticles in imidazolium ionic liquids: recyclable catalysts for biphasic hydrogenation reactions.
1-n-Butyl-3-methylimidazolium hexafluorophosphate room-temperature ionic liquid is not only suitable as a medium for the preparation and stabilization of iridium nanoparticles but also ideal for the generation of recyclable biphasic catalytic systems for hydrogenation reactions. Thus, Ir(0) nanoparticles with a mean diameter of 2 nm have been prepared by reduction of Ir(I) dissolved in the ionic liquid with H2. This catalytic solution can be reused several times for the biphasic hydrogenation of olefins under mild reaction conditions.
Journal Article↗