PubMed Health⌕ Search

Biomedical subjects

James C Y Dunn

Publications and source records attributed to James C Y Dunn.

At least 19 recordsLinked to original sources
PubMed2007

Analysis of oxygen transport in a diffusion-limited model of engineered heart tissue.

Cardiac tissue engineering has made notable progress in recent years with the advent of an experimental model based on neonatal cardiomyocytes entrapped in collage gels and purified basement membrane extract, known as "engineered heart tissues" (EHTs). EHTs are a formidable display of tissue-level contractile function and cellular-level differentiation, although they suffer greatly from mass transport limitations due to the high density of metabolically active cells and the diffusion-limited nature of the hydrogel. In this report, a mathematical model was developed to predict oxygen levels inside a one-dimensional, diffusion-limited model of EHT. These predictions were then compared to values measured in corresponding experiments with a hypoxia-sensitive stain (pimonidazole). EHTs were cast between two plastic discs, which allowed for mass transfer with the culture medium to occur in only the radial direction. EHTs were cultured for up to 36 h in the presence of pimonidazole, after which time they were snap-frozen, histologically sectioned, and stained for bound pimonidazole. Quantitative image analysis was performed to measure the distance from the culture medium at which hypoxia first occurs under various conditions. As tested by variation of simple design parameters, the trends in oxygen profiles predicted by the model are in reasonable agreement with those obtained experimentally, although a number of ambiguities related to the specific model parameters led to a general overprediction of oxygen concentrations. Based on the sensitivity analysis in the present study, it is concluded that diffusion-reaction models may offer relatively precise predictions of oxygen concentrations in diffusion-limited tissue constructs.

Biological Transport↗
PubMed2006

Modulation of protein delivery from modular polymer scaffolds.

Growth factors are increasingly employed to promote tissue regeneration with various biomaterial scaffolds. In vitro release kinetics of protein growth factors from tissue engineering scaffolds are often investigated in aqueous environment, which is significantly different from in vivo environment. This study investigates the release of model proteins with net-positive (histone) and net-negative charge (bovine serum albumin, BSA) from various scaffolding surfaces and from encapsulated microspheres in the presence of ions, proteins, and cells. The release kinetics of proteins in media with varying concentrations of ions (NaCl) suggests stronger electrostatic interaction between the positively charged histone with the negatively charged substrates. While both proteins released slowly from hydrophobic PCL surfaces, plasma etching resulted in rapid release of BSA, but not histone. Interestingly, although negatively charged BSA released readily from negatively charged collagen (col), BSA released slowly from col-coated PCL scaffolds. Such electrostatic interaction effects were abolished in the presence of serum proteins and cells as evidenced by the rapid release of proteins from col-coated scaffolds. To achieve sustained release in the complex environment of serum proteins and cells, the model proteins were encapsulated into poly(D,L-lactic-co-glycolic acid) (PLGA) microspheres, which were embedded within col-coated PCL scaffolds. Protein release from microspheres was modulated by changing the lactide-to-glycolide ratio of PLGA polymer. BSA adsorbed to col released faster than histone encapsulated in microspheres in the presence of serum and cells. Collectively, the data suggest that growth factor release is highly influenced by scaffold surface and the presence of ions, proteins, and cells in the media. Strategies to deliver multiple growth factors and studies which investigate their release should consider these important variables.

Animals↗
PubMed2006

Cell interaction with three-dimensional sharp-tip nanotopography.

Cells in their native microenvironment interact with three-dimensional (3D) nanofeatures. Despite many reports on the effects of substrate nanotopography on cells, the independent effect of 3D parameters has not been investigated. Recent advances in nanofabrication for precise control of nanostructure pattern, periodicity, shape, and height enabled this systematic study of cell interactions with 3D nanotopographies. Two distinct nanopatterns (posts and grates) with varying three-dimensionalities (50-600 nm in nanostructure height) were created, while maintaining the pattern periodicity (230 nm in pitch) and tip shape (needle- or blade-like sharp tips). Human foreskin fibroblasts exhibited significantly smaller cell size and lower proliferation on needle-like nanoposts, and enhanced elongation with alignment on blade-like nanogrates. These phenomena became more pronounced as the nanotopographical three-dimensionality (structural height) increased. The nanopost and nanograte architectures provided the distinct contact guidance for both filopodia extension and the formation of adhesion molecules complex, which was believed to lead to the unique cell behaviors observed.

Biocompatible Materials↗
PubMed2006

Contractile function of the mechanically lengthened intestine.

BACKGROUND: The application of longitudinal mechanical force induces lengthening of the small intestine. The purpose of this study is to evaluate the contractile function of the mechanically lengthened jejunum in a rodent model. MATERIALS AND METHODS: Three groups of rats including normal jejunum, isolated jejunal segment without mechanical lengthening, and isolated lengthened jejunal segment, were studied for contractile function. The isometric contractions of jejunal segments were investigated in organ baths for spontaneous activity and response to potassium chloride and cholinergic carbachol. RESULTS: The normal control group showed a basal spontaneous activity with an average frequency of 33 +/- 0.68 contractions per min (cpm). The basal spontaneous activity for the isolated group had an average frequency of 26 +/- 2.7 cpm and for the lengthened group had an average frequency of 24 +/- 5.7 cpm. Although the normal control group had a higher frequency of basal spontaneous activity as compared to either the isolated or lengthened groups, there was no statistically significant difference between the frequencies in the isolated and the lengthened groups. All three groups demonstrated a sustained increase in tension upon administration of either potassium chloride or carbachol. CONCLUSIONS: The response to pharmacological stimulation, as measured by total area under the tension curve and maximal change in basal tone, was larger in the normal group than in the isolated groups. The addition of longitudinal mechanical force to lengthen the isolated jejunal segment did not further alter this change.

Animals↗
PubMed2006

Distension enterogenesis: increasing the size and function of small intestine.

INTRODUCTION: The purpose of this study is to evaluate the feasibility of using saline infusion to lengthen small bowel while preserving intestinal enzymatic function. METHODS: Male Sprague-Dawley rats had a 3-cm jejunal segment taken out of continuity. A catheter was inserted in the proximal end, and the distal end was oversewn. Continuous infusion of saline into the isolated jejunal segment was started 2 weeks postoperatively. Segments were harvested 1 week later. Segment weights and lengths were measured preoperatively and at the time of harvest. Histology of harvested segments was performed. Alkaline phosphatase (ALP) and lactase assays were performed. Comparisons were made with normal jejunum from control animals. RESULTS: A 32% increase in length was achieved with saline distension of small intestine. The segment weight to length ratio was significantly increased by saline distension; however, the total protein-to-weight ratio was unchanged. Specific activities of ALP and lactase were not affected by saline distension. Because of the increased length and weight of the distended jejunal segments, total segment activities for both enzymes were significantly increased. CONCLUSIONS: Saline infusion appears to be a viable method for increasing small intestinal length without compromising enzymatic function. This phenomenon may provide a new method for the treatment of patients with short bowel syndrome in the future, and further study is warranted.

Animals↗
PubMed2006

Management of children with pancreatic head mass.

The management of children with a mass in the head of the pancreas is not well defined. The medical records of 3 children with obstructive jaundice because of a mass in the head of the pancreas over a 4-year period were reviewed retrospectively. Abdominal ultrasonography and computed tomography showed intrahepatic and extrahepatic ductal dilatation and a pancreatic mass. Intraoperative frozen section revealed no evidence of malignancy. These patients were separately managed by pylorus-preserving pancreaticoduodenectomy, cholecystectomy and Roux-en-Y choledochojejunostomy, common duct exploration, and T-tube drainage. The final pathology of the pancreatic head mass in all cases demonstrated chronic pancreatitis. Follow-up at an average of 7 months postoperatively showed no recurrence of obstructive jaundice. Unlike adults with a mass in the head of the pancreas, it is recommended that children with similar presentation should undergo biopsy and biliary diversion rather than resection as the primary therapy. Adults presenting with similar radiologic and clinical features would be treated by a pancreaticoduodenectomy in the absence of histologic evidence of malignancy. This series would suggest histologic conformation should be obtained before radical surgery in children.

Adolescent↗
PubMed2006

Sustainability of mechanically lengthened bowel in rats.

INTRODUCTION: It has been shown that the length of an intestinal segment may be doubled by applying gradual mechanical stretching. This study evaluated whether the lengthened intestinal segment retained the structure and function after the stretching device was removed. METHODS: A 1.5-cm jejunal segment was separated from intestinal continuity in 20 rats. After advancing a screw into the isolated jejunal segment by 5 mm 3 times a week until it was stretched by 3 cm, the screw was removed. Three weeks later, the jejunal segments were retrieved for analyses. Comparisons were made between the lengthened jejunal segments. RESULTS: The jejunal segment doubled its length after gradual stretching and retained this length 3 weeks after the screw removal (3.1 +/- 0.8 vs 3.2 +/- 0.4 cm, P > .05). The villous height, the muscular thickness, and the total alkaline phosphatase and lactase activities of the stretched jejunal segments were also unchanged 3 weeks after the screw removal. CONCLUSIONS: Mechanical force induced the sustained lengthening of isolated jejunal segments in rats. The histologic and enzymatic alterations also persisted 3 weeks after the mechanical force was removed. This phenomenon may provide a novel method for the treatment of short bowel syndrome.

Animals↗
PubMed2006

Serum-free cultures of murine adrenal cortical cells.

PURPOSE: The feasibility of culturing murine adrenal cortical cells before transplantation was investigated in this study. METHOD: Primary murine adrenal cortical cells were maintained in either fetal bovine and horse sera-containing media or serum-free media. Real-time polymerase chain reaction was used to quantify the levels of adrenal cortical gene expression in the cultured cells. RESULTS: The use of sera-containing media led to the growth of many cells in the culture, but the expression of Sf-1, Dax-1, and Cyp11b1 in such cultures declined rapidly. In contrast, there was no significant cell growth in the serum-free culture medium. Culturing murine adrenal cortical cells in the serum-free medium resulted in higher levels of Sf-1, Dax-1, and Cyp11b1 gene expression. In the serum-free medium, adrenal cortical cells also responded to adrenocorticotropic hormone by increasing the expression of Cyp11b1 and suppressing the expression of Dax-1 in a dose-dependent manner. The addition of basic fibroblast growth factor to the serum-free medium maintained the expression of Sf-1, Dax-1, and Cyp11b1 for 4 weeks. CONCLUSION: Adrenal cortical cells isolated from adult mice were successfully maintained in a serum-free culture medium with basic fibroblast growth factor. This culture system may be suitable for further manipulation of adrenal cortical cells in vitro before transplantation.

Adrenal Cortex↗
PubMed2006

The behavior of human mesenchymal stem cells in 3D fibrin clots: dependence on fibrinogen concentration and clot structure.

Natural biopolymers such as human fibrin are appealing to tissue engineers, because fibrin is biocompatible, bioresorbable, and essential in normal wound healing. There have been numerous studies to date to develop a fibrin-based injectable cell delivery system, albeit with varying success. We propose that the outcome of fibrin cell delivery can, in part, be attributed to the relative concentrations of fibrinogen and thrombin solutions (i.e., formulations) and the structure of the final 3D fibrin clot. Formulation-dependent proliferation of human mesenchymal stem cells (hMSCs) within 3D fibrin clots was investigated in vitro. Our results indicate that hMSCs are viable in all fibrin sealant formulations investigated, and proliferation rates vary with fibrin formulations. Furthermore, the fibrinogen solution, not thrombin, was found to have a more dominant role on hMSC proliferation, with dilute fibrinogen solutions promoting greater hMSC proliferation. Confocal and electron microscopy reveal formulation dependence on 3D fibrin clot structure, with dilute fibrinogen solutions yielding more open, homogeneous microstructures. This study suggests that the concentrations of fibrinogen and thrombin solutions must be carefully considered for cell delivery because they affect 3D fibrin clot structure and cell proliferation.

Blood Coagulation↗
PubMed2006

Human mesenchymal stem cell proliferation and osteogenic differentiation in fibrin gels in vitro.

This study analyzed human mesenchymal stem cell (hMSC) behavior in a fibrin sealant. hMSC morphology, proliferation, and osteogenic differentiation were analyzed after up to 28 days of incubation in eight different formulations of fibrin gels (Tisseel) prepared with various concentrations of fibrinogen complex (FC) and thrombin. Cell morphology and distribution within the gels were observed by fluorescence microscopy after cell staining with calcein dye. Cell proliferation was assessed by measuring the fluorescence intensity of the cell suspension stained with calcein dye after dissolution of the gels. A standard alkaline phosphatase (ALP) assay, von Kossa staining, and real-time reverse transcriptase-polymerase chain reaction (RT-PCR) were used to analyze hMSC osteogenic differentiation. Cell behavior varied depending on the gel formulation. Proliferation was higher in the formulations containing a low FC concentration, but ALP activity was higher in the formulations containing a high FC concentration. Variations in thrombin concentration had a lesser effect. Small nodules of mineralization were observed at days 21 and 28 in a formulation containing a high FC concentration, in addition to a marked increase in bone sialoprotein (BSP) gene expression level as well as a lower increase in ALP and osteopontin (OPN) levels. However, there was no significant increase in osteocalcin (OCN) expression, a late marker of osteogenic differentiation, up to day 28. In conclusion, this study demonstrated that hMSC morphology, proliferation, and osteogenic differentiation in fibrin gels depended on the FC/thrombin ratio. hMSCs appeared to undergo osteogenic differentiation when seeded in Tisseel fibrin sealant containing a high FC concentration, but they did not fully differentiate into mature osteoblasts.

Biocompatible Materials↗
PubMed2006

Analysis of cell growth in three-dimensional scaffolds.

The in vitro growth of pre-osteoblasts in multi-layer, three-dimensional scaffolds was determined from experimental measurements and was compared to a mathematical model. Immediately following cell seeding, the initial cell density was uniform throughout the scaffold. After 10 days, the cell density increased from 2.1 x 10(5) cells/cm(3) to 1.3 x 10(7) cells/cm(3) at the fluid-scaffold interface. The increase in cell density was largely confined to the outermost 200 microm from the fluid-scaffold interface. The cell density profile was in good agreement with a mathematical model that simulated the cell growth based on the local oxygen tension. The improved understanding derived from this mathematical model may be useful in the design of three-dimensional scaffolds that can support more uniform growth of cells.

3T3 Cells↗
PubMed2005

Modulation of gene expression in neonatal rat cardiomyocytes by surface modification of polylactide-co-glycolide substrates.

Myocardial tissue engineering presents a potential treatment option for heart disease. Cardiomyocytes isolated at various stages of development retain the ability to form contractile networks in vitro, which suggests that it should be possible to reconstitute viable myocardium given the appropriate architecture, stimuli, and cardiomyogenic cell source. This study investigates the effects of modifying substrate surface energy (by plasma etching) and protein coating (by fibronectin adsorption) on neonatal rat ventricular myocyte (NRVM) function. Primary NRVMs were cultured for 96 h on modified and control films of a common degradable polymer, polylactide-co-glycolide. Cultures were analyzed for cell spreading, protein content, and mRNA expression of atrial natriuretic factor and beta-myosin heavy chain. The results demonstrate that NRVMs cultured on etched films significantly increased in spreading, myofibril development, protein content, and gene expression of atrial natriuretic factor and beta-myosin heavy chain compared with unetched films, and that this surface energy effect is overwhelmed by the addition of fibronectin. Conclusions from this study are that surface energy and protein adsorption influence the gene expression of adherent NRVMs, and may be important for modulating the function of engineered myocardium.

Animals↗
PubMed2005

Gelatin-embedded cell-polymer constructs for histological cryosectioning.

Many tissue-engineering strategies involve the delivery of cells via porous polymer scaffolds. Obtaining histological sections of the emerging tissue is often necessary to analyze numerous characteristics of the microscopic environment. However, difficulties arise upon applying standard histological techniques to cell-seeded polymer scaffolds. This report describes a simple and reliable method for cryosectioning cell-polymer constructs embedded in gelatin. Solvent-soluble (PLGA) and insoluble (PGA) scaffolds were cultured in vitro with preosteoblasts, followed by histological processing with paraffin, OCT, or gelatin. Although paraffin-embedded PGA scaffolds withstood standard sectioning and rinsing steps, paraffin-embedded PLGA scaffolds were partially dissolved during the clearing step. OCT-embedded scaffolds produced sections that did not adhere well to slides, and most of the sample was lost during rinsing steps. In contrast, gelatin-embedded scaffolds exhibited adequate structural integrity during cryosectioning, adhered well to the slides, retained the actual polymer morphology, and exhibited compatibility with common stains.

Animals↗
PubMed2005

In vitro response of MC3T3-E1 pre-osteoblasts within three-dimensional apatite-coated PLGA scaffolds.

Biomimetic apatites have been reported to promote osteogenic activities in numerous in vivo and in vitro models, but the precise mechanism by which the apatite microenvironment promotes such activities is not well understood. Such mechanistic studies require reproducible model systems that are relevant to tissue engineering practices. Although two-dimensional (2D) apatite-coated polystyrene culture dishes provide practicality and reproducibility, they do not simulate the effects of the three-dimensional (3D) microenvironment and degrading polymeric substrates. A simple 3D model system to address these relevant effects, and its utilization in the investigation of apatite-promoted osteoblastic differentiation in vitro is reported in this paper. Apatite coating was achieved by sequentially immersing poly(lactide-co-glycolide) (PLGA) scaffolds into different simulated body fluids (SBF). SEM, EDX, FTIR, TEM electron diffraction confirmed the apatite coating to comprise of calcium-deficient carbonated hydroxyapatite crystals. While both apatite-coated and non-coated PLGA scaffolds supported MC3T3-E1 attachment, spreading, and proliferation, significant differences in osteoblastic differentiation were observed. Relative to non-coated controls, quantitative real-time PCR revealed significant apatite-associated suppression of alkaline phosphatase (ALP), early upregulation of osteopontin (OPN) at 3 days, and upregulation of osteocalcin (OCN) and bone sialoprotein (BSP) at 4 weeks. In summary, apatite-promoted osteoblastic differentiation can be observed in a 3D model system that is relevant to tissue engineering.

Animals↗
PubMed2005

The effect of biomimetic apatite structure on osteoblast viability, proliferation, and gene expression.

The conventional biomimetic apatite coating process can be accelerated by immersing substrates into concentrated simulated body fluid (5 x SBF) at 37 degrees C to form an initial coating of apatite precursor spheres, and transform the precursors into plate-like apatite structures. Depending on processing parameters, different apatite structures can be created over the same substrate. The purpose of this study is to investigate the effects of the different apatite microenvironment on cell spreading, viability, proliferation, and gene expression. MC3T3-E1 preosteoblasts were cultured on five surfaces: conventional apatite (CA), precursor apatite spheres (PreA), large plate-like apatites (LgA), small plate-like apatites (SmA), and tissue culture grade polystyrene (TCPS). PreA induced significantly higher cell death during the first two weeks. TCPS supported more uniform spreading (1 day) and higher proliferation (2 weeks) than CA, LgA, and SmA. Apatites restricted spreading and promoted the extension of cellular projections along the textured surfaces under confocal microscopy observation. By 3 weeks, LgA induced highest expression of mature osteogenic markers osteocalcin (OCN) and bone sialoprotein (BSP) in both regular and osteogenic culture media based on quantitative real-time RT-PCR. The results of this study suggest differential cell responses to subtle changes in apatite microenvironment.

3T3 Cells↗
PubMed2005

Scaffold fabrication by indirect three-dimensional printing.

Three-dimensional printing (3DP) has been employed to fabricate porous scaffolds by inkjet printing liquid binder droplets onto particulate matter. Direct 3DP, where the final scaffold materials are utilized during the actual 3DP process, imposes several limitations on the final scaffold structure. This study describes an indirect 3DP protocol, where molds are printed and the final materials are cast into the mold cavity to overcome the limitations of the direct technique. To evaluate the resolution available in this technique, scaffolds with villi features (500 microm diameter, 1 mm height) were produced by solvent casting into plaster molds, followed by particulate leaching. Scanning electron microscope (SEM) showed highly open, well interconnected, uniform pore architecture ( approximately 100-150 microm). The ability of these scaffolds to support intestinal epithelial cell (IEC6) culture was investigated in vitro. IEC6 cells attached to scaffolds uniformly in vitro and grew preferentially in the villi region. To exploit the freeform nature of this technique with large pore size, anatomically shaped zygoma scaffolds with 300-500 microm interconnected pores were produced and characterized. Indirect 3DP provides an alternative method to complement other direct solid freeform fabrication methods.

Biocompatible Materials↗
PubMed2004

The effect of pH on the structural evolution of accelerated biomimetic apatite.

The classic biomimetic apatite coating process can be accelerated by first immersing substrates into concentrated simulated body fluid, 5x SBF (SBF1), at 37 degrees C, to form an initial coating of precursor apatite spheres, and subsequently transferring to a second 5x SBF (SBF2) solution which is devoid of crystal growth inhibitors to promote phase transformation of SBF1-derived precursor apatite spheres into final crystalline apatite plates. Since SBF1 governs the formation kinetics and composition of the initial precursor spheres, we hypothesized that the pH of the SBF1 solution will also influence the final structure of the SBF2-derived crystalline apatite. To test this hypothesis, polystyrene substrates were immersed into SBF1 with different pH (5.8 or 6.5), and then immersed into the identical SBF2 (pH=6.0). The resultant apatites exhibited similar 2 theta XRD peaks; FTIR spectra in terms of hydroxyl, phosphate and carbonate groups; and Ca/P atomic ratio (1.42 for SBF1(5.8) apatite; 1.48 for SBF1(6.5) apatite). SEM, TEM and electron diffraction show that while SBF1(6.5) (pH 6.5) precursor spheres transform into larger, single crystals plates, SBF1(5.8) (pH 5.8) precursor spheres developed minute, polycrystalline plate-like structures over predominantly spherical precursor substrate.

Apatites↗