Biomedical subjects

James G Kushmerick

Publications and source records attributed to James G Kushmerick.

10 recordsLinked to original sources

PubMed2007

Rapid proton-coupled electron-transfer of hydroquinone through phenylenevinylene bridges.

We describe the synthesis of two oligo(phenylene vinylene)s (OPVs) with a hydroquinone moiety and a thiol anchor group: 4-(2',5'-dihydroxystyryl)benzyl thioacetate and 4-[4'-(2' ',5' '-dihydroxystyryl)styryl]benzyl thioacetate. Monolayers on gold of these molecules were examined by electrochemical techniques to determine the electron transfer kinetics of the hydroquinone functionality (H2Q) through these delocalized tethers ("molecular wires") as a function of pH. Between pH 4 and 9, rate constants were ca. 100-fold faster than for the same H2Q functionality confined to the surface via alkane tethers. Also, in this same pH range rate constants were independent of the length of the OPV bridge. These new electroactive molecules in which the hydroquinone functionality is wired to the gold surface by means of OPV tethers should be useful platforms for constructing bioelectronic devices such as biosensors, biofuel cells, and biophotovoltaic cells with a fast response time.

Chemistry, Physical↗

PubMed2007

Switching surface chemistry with supramolecular machines.

Tethered supramolecular machines represent a new class of active self-assembled monolayers in which molecular configurations can be reversibly programmed using electrochemical stimuli. We are using these machines to address the chemistry of substrate surfaces for integrated microfluidic systems. Interactions between the tethered tetracationic cyclophane host cyclobis(paraquat-p-phenylene) and dissolved pi-electron-rich guest molecules, such as tetrathiafulvalene, have been reversibly switched by oxidative electrochemistry. The results demonstrate that surface-bound supramolecular machines can be programmed to adsorb or release appropriately designed solution species for manipulating surface chemistry.

Electrochemistry↗

PubMed2006

Single-molecule charge-transport measurements that reveal technique-dependent perturbations.

We compare scanning tunneling microscopy (STM) imaging with single-molecule conductive atomic force microscopy (C-AFM) measurements by probing a series of structurally related thiol-terminated oligo(phenylenevinylene)s (OPVs) designed to have unique charge-transport signatures. When one or two methylene spacers are inserted between the thiol points of attachment and the OPV core, a systematic reduction in the imaged molecular transconductance and the current transmitted through a metal-molecule-metal junction containing the molecule is observed, indicating good agreement between STM and C-AFM measurements. However, a structure where the OPV backbone is interrupted by a [2.2]paracyclophane core has a low molecular transconductance, as determined from STM images, and a high measured single-molecule conductance. This apparent disconnect can be understood by comparing the calculated molecular orbital topology of the OPV with one thiol bound to a gold surface (the geometry in the STM experiment) with the topology of the molecule with both thiol termini bound to gold (relevant to C-AFM). In the former case, a single contact splits low-lying molecular orbitals into two discrete fragments, and in the latter case, molecular orbitals that span the entire molecule are observed. Although the difference in observed conductance between the two different measurements is resolved, the overall set of observations highlights the importance of using combined techniques to better characterize charge-transport properties relevant to molecular electronics.

Journal Article↗

PubMed2006

Transition from direct tunneling to field emission in metal-molecule-metal junctions.

Current-voltage measurements of metal-molecule-metal junctions formed from pi-conjugated thiols exhibit an inflection point on a plot of ln(I/V(2)) vs 1/V, consistent with a change in transport mechanism from direct tunneling to field emission. The transition voltage was found to scale linearly with the offset in energy between the Au Fermi level and the highest occupied molecular orbital as determined by ultraviolet photoelectron spectroscopy. Asymmetric voltage drops at the two metal-molecule interfaces cause the transition voltage to be dependent on bias polarity.

Journal Article↗

PubMed2006

Structural contributions to charge transport across Ni-octanedithiol multilayer junctions.

We report the fabrication and characterization of multilayer thin films incorporating 1,8-octanedithiols and Ni atoms. Low-temperature charge transport measurements exhibit inelastic co-tunneling and resonant tunneling features that correspond energetically to vibrational excitations of the molecular multilayer. Several junctions exhibit changes in conductance features characteristic of charge defect-gating. Transport through our junctions is shown to be dominated by the intrinsic properties of the multilayer.

Electron Transport↗

PubMed2005

Ru2(ap)4(sigma-oligo(phenyleneethynyl)) molecular wires: synthesis and electronic characterization.

Reported in this contribution are the synthesis, characterization, and charge transport properties of wire-like Ru2(ap)4(OPEn), where ap is 2-anilinopyridinate and OPE is -(CCC6H4)nSCH2CH2SiMe3 with n = 1 (1) and 2 (2). Scanning tunneling microscopy (STM) measurements of compound 2 inserted into a SAM of C11 thiol reveal that molecule 2 exhibits (i) the stochastic switching characteristic of wire molecules embedded in insulating SAMs and (ii) higher conductivity than the C11 thiol SAM. More importantly, analysis of the molecular electronic decay constant (beta) exhibits a decrease of at least 15% as compared to purely organic molecular analogues. Hence, the transport characteristics of molecules can be significantly improved for nanoscale electronics through the incorporation of a Ru2 fragment into conjugated backbone.

Journal Article↗

PubMed2005

Probing pi-coupling in molecular junctions.

Charge transport characteristics for metal-molecule-metal junctions containing two structurally related pi-conjugated systems were studied to probe pi-pi interactions in molecular junctions. The first molecule contains a typical pi-conjugated framework derived from phenylene vinylene units, whereas the second has the phenylene vinylene structure interrupted by a [2.2]paracyclophane (pCp) core. Electrochemical investigations were used to characterize the defects and packing density of self-assembled monolayers of the two molecules on gold surfaces and to enable quantitative comparison of their transport characteristics. Current-voltage measurements across molecular junctions containing the two species demonstrate that the pCp moiety yields a highly conductive break in through-bond pi-conjugation. The observed high conductivity is consistent with density functional theory calculations, which demonstrate strong through-space pi-pi coupling across the pCp moiety.

Electrochemistry↗

PubMed2005

Molecularly inherent voltage-controlled conductance switching.

Molecular electronics has been proposed as a pathway for high-density nanoelectronic devices. This pathway involves the development of a molecular memory device based on reversible switching of a molecule between two conducting states in response to a trigger, such as an applied voltage. Here we demonstrate that voltage-triggered switching is indeed a molecular phenomenon by carrying out studies on the same molecule using three different experimental configurations-scanning tunnelling microscopy, crossed-wire junction, and magnetic-bead junction. We also demonstrate that voltage-triggered switching is distinctly different from stochastic switching, essentially a transient (time-dependent) phenomenon that is independent of the applied voltage.

Journal Article↗

PubMed2003

Ligand effects on charge transport in platinum(II) acetylides.

To investigate the electrical characteristics of organometallic complexes as molecular conductors, organometallic pi-conjugated molecules of the type trans-[PtL2(CCC6H4SAc-4)2], where L = PCy3, PBu3, PPh3, P(OEt)3, P(OPh)3, were synthesized and characterized by NMR, IR, UV, and X-ray spectroscopies. For the three complexes (L = PCy3, PPh3, and P(OEt)3) that could be measured using a cross-wire junction technique, the current-voltage (I-V) characteristics of a molecular monolayer of these complexes showed no ligand effect, despite spectroscopic evidence that electronic interaction between the phosphine ligands and the pi-system does occur. It was concluded that the tunneling efficiency across the molecule is the determining factor for conduction in this metal-molecule-metal system. It was also shown that the incorporation of a transition metal in pi-conjugated molecular wires does not adversely affect charge transport compared to all-carbon pi-conjugated molecular wires.

Journal Article↗

PubMed2002

Effect of bond-length alternation in molecular wires.

Current-voltage (I-V) characteristics for metal-molecule-metal junctions formed from three classes of molecules measured with a simple crossed-wire molecular electronics test-bed are reported. Junction conductance as a function of molecular structure is consistent with I-V characteristics calculated from extended Hückel theory coupled with a Green's function approach, and can be understood on the basis of bond-length alternation.

Journal Article↗