PubMed Health⌕ Search

Biomedical subjects

James M Anderson

Publications and source records attributed to James M Anderson.

At least 19 recordsLinked to original sources
PubMed2005

Novel bactericidal surface: Catechin-loaded surface-erodible polymer prevents biofilm formation.

We developed a novel bactericidal surface based on a catechin-loaded surface-erodible polymer. (-)-Epigallocatechin-3-gallate (EGCg), which is the main constituent of tea catechins, showed a dose-dependent inhibitory effect on Escherichia coli biofilm formation and a dose-dependent enhanced destructive effect on biofilm. EGCg-immobilized surfaces were prepared by photopolymerization of liquid biodegradable polyesters. The releasing rate was enhanced with an increase in surface-erosion rate of photocured polymers. Polymers with high releasing capacity dose-dependently reduced biofilm formation on the surfaces. The confocal laser scanning microscopic and scanning electron microscopic observations revealed that EGCg induced biofilm-destructing activities, which include bacterial membrane damage, degradation of exopolysaccharides, and detachment of colonized cells. From these results, potential advantages of the clinical use of catechin-loaded polymer-coated implants or catheters are discussed in terms of a reduced occurrence of biomaterial-centered infections without substantial toxicity or adverse effects.

Anti-Infective Agents↗
PubMed2005

Lymphocytes and the foreign body response: lymphocyte enhancement of macrophage adhesion and fusion.

The host foreign body response ensues immediately following implantation of medical devices and prostheses. We have previously identified the role of macrophages in adhering to biomaterial surfaces and guiding the foreign body response while fusing into foreign body giant cells (FBGCs) and concentrating degradative and phagocytic activities. Despite their early and transient presence around implanted biomaterials, few studies have focused on the role of lymphocytes in the foreign body response and biocompatibility. To address this, an in vitro human lymphocyte/macrophage coculture system has been developed. Using this system, it has been shown that when lymphocytes are present during the initial adhesion of monocytes, the rate of monocyte adhesion and fusion is significantly increased (1,500 cells/mm2 and 60%, respectively) when compared to either no lymphocytes present (500 cells/mm2 adhesion and 0% fusion). Although lymphocytes adhered to the tissue culture polystyrene surface, 90% of the lymphocytes were associated with adherent macrophages. However, these cell-cell direct interactions were not necessary to influence macrophage adhesion or fusion as separating the two cell types by a Transwell insert still resulted in significantly increased levels of macrophage adhesion (p < 0.05 when compared to macrophage only cultures). Conversely, the presence of macrophages in Transwell experiments increased lymphocyte proliferation rates at all time points tested. These studies begin to detail the interactions between lymphocytes and macrophages in the absence of known antigen that appropriately relates to the scenarios experienced upon implantation of biomedical devices and the initiation of the foreign body response.

Adult↗
PubMed2005

Phospholipid polymer surfaces reduce bacteria and leukocyte adhesion under dynamic flow conditions.

Persistence of infection can occur when the host immune response is compromised because of the presence of a foreign implant. Surface modification of biomaterials with phospholipid polymers may enhance biocompatibility and reduce incidence of infection by impeding bacterial and leukocyte adhesion. A rotating disk model, which generates shear stress from 0 to 18 dynes/cm(2), was used to characterize adhesion of neutrophils, monocytes, and bacteria in phosphate-buffered saline (PBS) or 25% human serum on polyethylene terephthalate surfaces coated with a phospholipid polymer, poly[omega-methacryloyloxyalkyl phosphorylcholine (MAPC)-co-n-butyl methacrylate (BMA)]. The material designated PMB30 contains a methylene chain length, (CH(2))(n), of n = 2, whereas PMHB30 contains a chain length of n = 6. In PBS, bacterial adhesion was shear stress dependent with the lowest bacterial density observed on PMB30. However, the presence of serum proteins eliminated shear stress and surface chemistry effects in addition to bacterial adhesion reduced to <10% of adhesion in PBS. Trends for leukocyte adhesion in serum demonstrated shear dependence with PMB30 exhibiting the lowest cell density throughout the range of shear stresses. In conclusion, modification of the polyethylene terephthalate surfaces with phospholipid polymers resulted in reduced bacterial and leukocyte adhesion. Furthermore, shortening the methylene chain length of the MAPC copolymer most effectively reduced adhesion.

Bacterial Adhesion↗
PubMed2005

Surface modification of poly(ether urethane urea) with modified dehydroepiandrosterone for improved in vivo biostability.

In this study, a fatty acid urethane derivative of dehydroepiandrosterone (DHEA) was synthesized and evaluated as a polyurethane additive to increase long-term biostability. The modification was hypothesized to reduce the water solubility of the DHEA and physically anchor the additive in the polyurethane during implantation. Polyurethane film weight loss in water as a function of time was studied to determine the polymer retention of the modified DHEA. The polyurethane film with unmodified DHEA had significant weight loss in the first day (10%) that was previously correlated to rapid leaching of the additive. The polyurethane film with modified DHEA had significantly less weight loss at all time points indicating improved polymer retention. The effect of the modified DHEA additive on the biostability of a poly(ether urethane urea) was examined after 5 weeks of subcutaneous implantation in Sprague-Dawley rats. Optical micrographs and infrared analysis of the specimens indicated that the modified DHEA bloomed to the surface of the film forming a crystalline surface layer approximately 10-15 microns thick. After explantation, this surface layer was intact without measurable differences in surface chemistry as monitored by attenuated total reflectance-Fourier transform infrared spectroscopy. There was no evidence of degradation of the polyurethane underneath the modified DHEA surface layer as compared with the polyurethane control. We have concluded that the modified DHEA self-assembled into a protective surface coating that inhibited degradation of the polyurethane. The roughness of the modified DHEA surface layer prevented adherent cell analysis to determine if the additive retained the ability to down-regulate macrophage activity. Subsequent studies will investigate the ability of surface-modifying additives to modulate cellular respiratory bursts in addition to the formation of an impermeable barrier. This bimodal approach to improving biostability holds great promise in the field of polyurethane biomaterials.

Animals↗
PubMed2005

Palmitoylation of claudins is required for efficient tight-junction localization.

Palmitoylation of integral membrane proteins can affect intracellular trafficking, protein-protein interactions and protein stability. The goal of the present study was to determine whether claudins, transmembrane-barrier-forming proteins of the tight junction, are palmitoylated and whether this modification has functional implications for the tight-junction barrier. Claudin-14, like other members of the claudin family, contains membrane-proximal cysteines following both the second and the fourth transmembrane domains, which we speculated could be modified by S-acylation with palmitic acid. We observed that [(3)H]-palmitic acid was incorporated into claudin-14 expressed by transfection in both cultured epithelial cells and fibroblasts. Mutation of cysteines to serines following either the second or the fourth transmembrane segments decreased the incorporation of [(3)H]-palmitic acid, and mutation of all four cysteines eliminated palmitoylation. We previously reported that expression of claudin-14 in epithelial monolayers results in a fivefold increase in electrical resistance. By contrast, expression of the mutant claudin-14 resulted in smaller increases in resistance. The mutants localized less well to tight junctions and were also found in lysosomes, suggesting an alteration in trafficking or stability. However, we observed no change in protein half-life and only a small shift in fractionation out of caveolin-enriched detergent-resistant membranes. Although less well localized to the tight junction, palmitoylation-deficient claudin-14 was still concentrated at sites of cell-cell contact and was competent to assemble into freeze-fracture strands when expressed in fibroblasts. These results demonstrate that palmitoylation of claudin-14 is required for efficient localization into tight junctions but not stability or strand assembly. Decreased ability of the mutants to alter resistance is probably the result of their less efficient localization into the barrier.

Animals↗
PubMed2004

Repeated in vivo electrochemical activation and the biological effects of microelectromechanical systems drug delivery device.

The repeated activation of a microelectromechanical systems (MEMS) drug delivery device was studied in vivo in rats to examine the effect of implantation on the device operation and the effect of electrochemical activation on the inflammatory and wound-healing response. The MEMS devices were fabricated from a silicon wafer into which reservoirs were etched and covered with gold membranes. The membranes were electrochemically removed when an anodic voltage was applied. Devices were implanted subcutaneously both with and without stainless steel mesh cages for 4, 7, 14, 21, or 28 days before activation. Devices were activated every other day for five activations. Leukocyte concentrations indicated that both the application of voltage and the gold corrosion products elevated the inflammatory response which was resolved within 48 h after each activation. The efficiency of gold membrane removal was not impaired throughout the implantation, although a bimodal distribution of background current densities was observed after long implantation times. The thickness of the fibrous capsule surrounding the MEMS devices was similar between activated and control devices explanted at each time point. It was concluded that the repeated activation of MEMS drug delivery devices was successful and the activation produced an acceptable biological response that resolved promptly.

Animals↗
PubMed2004

Surface chemistry mediates adhesive structure, cytoskeletal organization, and fusion of macrophages.

Surface chemistry modulates many critical functions of monocyte/macrophages such as adhesion, fusion, spreading, phagocytosis, and secretion. In this study, we investigated the effect of silicone modification on adhesive structure development and cytoskeletal reorganization of adherent macrophages on polyurethanes. Confocal scanning laser microscopy (CSLM) was used for qualitative and quantitative evaluation of cytoskeletal reorganization of adherent macrophages. Data presented here showed less spreading for adherent cells on silicone-modified materials due to the higher hydrophobicity and protein adsorption profile. This decrease in spreading was accompanied by less F-actin content in adherent cells on silicone-modified polyurethanes and PDMS control, indicating that silicone modification reduces the strength of adhesion. With the addition of interleukin-4 (IL-4) at days 3 and 7 to our culture, adherent cell morphology dramatically changed. The change in morphology led to higher macrophage fusion and foreign body giant cell (FBGC) formation on silicone modified materials after 10 days. In addition, mannose receptor (MR) expression was up-regulated on the silicone-modified polyurethanes and PDMS control in the presence of IL-4. Up-regulation of MR expression suggests an alternatively activated phenotype for adherent macrophages, which is accompanied with an attenuated proinflammatory cytokine production and reactive oxygen secretion. It appears that silicone modification accelerates acquisition of an alternative macrophage and FBGC phenotype, which may then result in increased polyurethane biostability.

Actins↗
PubMed2004

Oxidative mechanisms of poly(carbonate urethane) and poly(ether urethane) biodegradation: in vivo and in vitro correlations.

This study used an in vitro environment that simulated the microenvironment at the adherent cell-material interface to reproduce and accelerate the biodegradation of poly(ether urethane) (PEU) and poly(carbonate urethane) (PCU). Polyurethane films were treated in vitro for 24 days in 20% hydrogen peroxide/0.1 M cobalt chloride solution at 37 degrees C. Characterization with ATR-FTIR and SEM showed soft segment and hard segment degradation consistent with the chemical changes observed after long-term in vivo treatment. Overall, the PCU underwent less degradation and the degraded surface layer was much thinner than PEU. Nevertheless, the results supported a common oxidation mechanism for biodegradation of these polymers. The observed in vitro degradation was inhibited by adding an antioxidant to the polyurethane film. Our findings further support the use of the in vitro H(2)O(2)/CoCl(2) system in evaluating the biostability of polyurethanes under accelerated conditions.

Animals↗
PubMed2004

Confocal imaging of biofilm formation process using fluoroprobed Escherichia coli and fluoro-stained exopolysaccharide.

We developed a novel method of evaluating biofilm architecture on a synthetic material using green fluorescent protein-expressing Escherichia coli and red fluorescence staining of exopolysaccharides. Confocal laser scanning microscopy observation revealed the time course of the change in the in situ three-dimensional structural features of biofilm on a polyurethane film without structural destruction: initially adhered cells are grown to form cellular aggregates and secrete exopolysaccharides. These cells were spottily distributed on the surface at an early incubation time but fused to form a vertically grown biofilm with incubation time. Fluorescence intensity, which is a measure of the number of cells, determined using a fluorometer and biofilm thickness determined from confocal laser scanning microscopy vertical images were found to be effective for quantification of time-dependent growth of biofilms. The curli (surface-located fibers specifically binding to fibronectin and laminin)-producing Escherichia coli strain, YMel, significantly proliferated on fibronectin-coated polyurethane, whereas the curli-deficient isogenic mutant, YMel-1, did not. The understanding of biofilm architecture in molecular and morphological events and new fluorescence microscopic techniques may help in the logical surface design of biomaterials with a high antibacterial potential.

Bacterial Adhesion↗
PubMed2004

Biomaterial surface-dependent neutrophil mobility.

Compromised neutrophil function in the presence of an implanted biomaterial may represent an important mechanism that allows for the development of implant-associated infections. Here, human neutrophil mobility has been investigated on a polyurethane (ChronoFlex AR), a hydrophobic surface consisting of an octadecyltrichlorosilane (OTS) self-assembled monolayer, and a glass reference material. Neutrophil mobility was quantified, based on cell movement speed and persistence time obtained from time-lapse optical microscopy, while neutrophil cytoskeletal structures and morphology were visualized using confocal microscopy and atomic force microscopy. Our results show that material surface properties affect neutrophil-surface interactions, as reflected by morphological changes, and the mobility of neutrophils stimulated by N-formylmethionyl-leucyl-phenylalanine (fMLP). In the absence of adsorbed plasma proteins, the mobility of stimulated neutrophils increased with increasing material hydrophobicity from glass, to polyurethane, to OTS. The opposite trend was observed in the presence of adsorbed plasma proteins, such that neutrophil mobility increased with decreasing material hydrophobicity. Analysis of the results showed that the mobility of fMLP-stimulated neutrophils cells was inversely related to the extent of cell spreading on the materials.

Biocompatible Materials↗
PubMed2004

Inhibition of macrophage development and foreign body giant cell formation by hydrophilic interpenetrating polymer network.

The ability of monocytes to adhere, differentiate into macrophages, and fuse to form foreign body giant cells (FBGCs) on an implanted material surface is a critical step toward biomaterial degradation. Novel homogeneous surfaces were utilized to mediate adhesion. These surfaces consisted of N-(2 aminoethyl)-3-aminopropyltrimethoxysilane (EDS) and an interpenetrating polymer network (IPN) of polyacrylamide and poly(ethylene glycol). These surfaces were designed to control cell adhesion and morphology and mediate cell differentiation, activation, metabolic ability, and apoptosis, resulting in a reduced or controlled inflammatory response. The EDS surface promotes cell adhesion and the IPN minimizes protein adsorption and subsequent cell adhesion. Both surfaces had similar cellular adhesion rates at each respective time point. However, the adherent macrophage morphology was similar at 2 h and day 3, and at days 7 and 10 adherent macrophages on the EDS surface formed FBGCs (46% at day 7 and 40% at day 10). Adherent cells on the IPN surface did not form FBGCs but instead formed monocyte aggregates (73% of adherent cells formed aggregates at day 7 and 63% at day 10). It is indicated that the two surface chemistries differentially controlled monocyte differentiation into macrophages and subsequent macrophage fusion to form FBGCs.

Acrylic Resins↗
PubMed2004

Alternative approach to enhancing cation selectivity in ion chromatography.

A new approach to enhance cation selectivity in ion chromatography (IC) is described. Two packings, one carrying a conventional carboxylate cation exchanger and the other carrying a crown ether (CE) phase are packed into two separate columns and used in series. The resolution between sodium and ammonium and between ammonium and potassium is increased significantly. The two stationary phases may also be mixed and packed into a single column. The selectivity of the cations can be adjusted easily by varying the dimensions of the carboxylate and CE columns (in the two-column configuration), or by changing the ratio of the carboxylate cation exchanger to the CE packing (in the single-column configuration). These new systems separate ammonium and sodium, even when the sodium concentration is 5000 times higher. Amines such as ethanolamine and triethanolamine can also be separated from the alkali and alkaline-earth cations.

Cations↗
PubMed2004

Effect of fibrous capsule formation on doxorubicin distribution in radiofrequency ablated rat livers.

In this study, we report the histological findings of a combined therapy using radiofrequency ablation and intratumoral drug delivery in rat livers, with special attention to wound-healing processes and their effects on drug transport in post-ablated tissue. Doxorubicin-loaded millirods were implanted in rat livers that had undergone medial lobe ablation. Millirods and liver samples were retrieved upon animal sacrifice at time points ranging from 1 h to 8 days. Results demonstrate a clearly defined area of coagulative necrosis within the ablation boundary. The wound-healing response, complete with the appearance of inflammatory cells, neovascularization, and the formation of a fibrous capsule, was also observed. At the 8-day time point, fluorescence imaging analysis showed a higher concentration of doxorubicin localized within the ablation region, with its distribution hampered primarily by fibrous capsule formation at the boundary. Given the variant nature of ablated liver, a mathematical model devised previously by our laboratory describes the data well up to 4 days, but loses reliability at 8 days. These results provide useful mechanistic insights into the wound-healing response after radiofrequency ablation and polymer millirod implantation, as well as the impact this natural corollary has on drug distribution.

Animals↗
PubMed2004

Poly(carbonate urethane) and poly(ether urethane) biodegradation: in vivo studies.

Several strategies have been used to increase the biostability of medical-grade polyurethanes while maintaining biocompatibility and mechanical properties. One approach is to chemically modify or replace the susceptible soft segment. Currently, poly(carbonate urethanes) (PCUs) are being evaluated as a replacement of poly(ether urethanes) (PEUs) in medical devices because of the increased oxidative stability of the polycarbonate soft segment. Preliminary in vivo and in vitro studies have reported improved biostability of PCUs over PEUs. Although several studies have reported evidence of in vitro degradation of these new polyurethanes, there has been no evidence of significant in vivo degradation that validates a degradation mechanism. In this study, the effect of soft segment chemistry on the phase morphology, mechanical properties, and in vivo response of commercial-grade PEU and PCU elastomers was examined. Results from dynamic mechanical testing and infrared spectroscopy suggested that the phase separation was better in PCU as compared with PEU. In addition, the higher modulus and reduced ultimate elongation of PCU was attributed to the reduced flexibility of the polycarbonate soft segment. Following material characterization, the in vivo biostability and biocompatibility of PEU and PCU were studied using a subcutaneous cage implant protocol. The results from the cage implant study and cell culture experiments indicated that monocytes adhere, differentiate, and fuse to form foreign body giant cells on both polyurethanes. It is now generally accepted that the reactive oxygen species released by these adherent macrophages and foreign body giant cells initiate PEU biodegradation. Attenuated total reflectance-Fourier transform infrared analysis of explanted samples provided evidence of chain scission and crosslinking in both polyurethanes. This indicated that the PCU was also susceptible to biodegradation by agents released from adherent cells. These results reinforce the need to evaluate and understand the biodegradation mechanisms of PCUs.

Biocompatible Materials↗
PubMed2004

Effect of soft-segment chemistry on polyurethane biostability during in vitro fatigue loading.

The effect of soft-segment chemistry on biostability of polyurethane elastomers was studied with a diaphragm-type film specimen under conditions of static and dynamic loading. During testing, the films were exposed to an H(2)O(2)/CoCl(2) solution, which simulated the oxidative component of the in vivo environment. Films treated for up to 24 days were evaluated by IR spectroscopy and by optical and scanning electron microscopy. Biostability of a poly(ether urethane) (PEU), which is known to undergo oxidative degradation, was compared with biostability of a poly(carbonate urethane) (PCU), which is thought to be more resistant to oxidation than PEU. Materials similar to PEU and PCU, in which the polyether or polycarbonate soft segment was partially replaced with poly(dimethylsiloxane) (PDMS), were also tested with the expectation that PDMS would improve soft-segment biostability. Oxidative degradation of the polyether soft segment of PEU was manifest chemically as chain scission and cross-linking and physically as surface pitting. Biaxial fatigue accelerated chemical degradation of PEU and eventually caused brittle stress cracking. In comparison, the polycarbonate soft segment was more stable to oxidation; there was minimal chemical or physical degradation of PCU, even in biaxial fatigue. Partial substitution of the polyether soft segment with PDMS enhanced oxidative stability of PEU. Although both strategies for modifying soft-segment chemistry improved the resistance to oxidative degradation, the outstanding mechanical properties of PEU were compromised to some extent.

Biocompatible Materials↗
PubMed2004

In vivo inflammatory and wound healing effects of gold electrode voltammetry for MEMS micro-reservoir drug delivery device.

The in vivo biocompatibility and biofouling of gold electrodes for a microelectromechanical systems drug delivery device were investigated in a rodent model. The role of the applied voltage and gold electrolysis products in modulating the inflammatory response (biocompatibility), and the temporal adhesion of cellular populations onto macroscopic gold film electrodes (biofouling) were analyzed in reference to two controls, devices to which voltage was not applied (uncorroded) or voltage was applied to inert platinum electrodes (electrical controls). Voltammetry was applied to the gold surfaces once (day 4, 7, 14, 21, 28, 35, 42, or 49), while voltage of identical magnitude was applied to the electrical controls. An inflammatory response characterized by a rapid decrease of leukocyte concentration to control levels was observed 48 h following voltage application with no significant cell concentration difference (p > 0.05) between the corroded devices and electrical controls. The histological evaluation of the direct implant fibrous capsule showed comparable thickness of voltage applied and control specimens. The gold corrosion peak current showed no significant difference (p > 0.05) among peak values at all time points. It was concluded that gold electrode corrosion was biocompatible and its electrochemical performance was not hindered by fibrous capsule formation.

Animals↗
PubMed2004

Differential degradation rates in vivo and in vitro of biocompatible poly(lactic acid) and poly(glycolic acid) homo- and co-polymers for a polymeric drug-delivery microchip.

The biocompatibility and biodegradation rate of component materials are critical when designing a drug-delivery device. The degradation products and rate of degradation may play important roles in determining the local cellular response to the implanted material. In this study, we investigated the biocompatibility and relative biodegradation rates of PLA, PGA and two poly(lactic-co-glycolic acid) (PLGA) polymers of 50:50 mol ratio, thin-film component materials of a drug-delivery microchip developed in our laboratory. The in vivo biocompatibility and both in vivo and in vitro degradation of these materials were characterized using several techniques. Total leukocyte concentration measurements showed normal acute and chronic inflammatory responses to the PGA and low-molecular-weight PLGA that resolved by 21 days, while the normal inflammatory responses to the PLA and high-molecular-weight PLGA were resolved but at slower rates up to 21 days. These results were paralleled by thickness measurements of fibrous capsules surrounding the implants, which showed greater maturation of the capsules for the more rapidly degrading materials after 21 days, but less mature capsules of sustained thicknesses for the PLA and high-molecular-weight PLGA up to 49 days. Gel-permeation chromatography of residual polymer samples confirmed classification of the materials as rapidly or slowly degrading. These materials showed thinner fibrous capsules than have been reported for other materials by our laboratory and have suitable biocompatibility and biodegradation rates for an implantable drug-delivery device.

Biocompatible Materials↗