PubMed Health⌕ Search

Biomedical subjects

James N Culver

Publications and source records attributed to James N Culver.

13 recordsLinked to original sources

Transgene-free genome editing in citrus and poplar trees using positive and negative selection markers.

Transgene-free genome editing of the gene of interest in citrus and poplar has been achieved by co-editing the ALS gene via transient transgene expression of an efficient cytosine base editor. CRISPR-Cas genome editing systems have been widely used in plants. However, such genome-edited plants are nearly always transgenic in the first generation when Agrobacterium-mediated transformation is used. Transgene-free genome-edited plants are valuable for genetic analysis and breeding as well as simplifying regulatory approval. It can be challenging to generate transgene-free genome-edited plants in vegetatively propagated or perennial plants. To advance transgene-free genome editing in citrus and poplar, we investigated a co-editing strategy using an efficient cytosine base editor (CBE) to edit the ALS gene to confer herbicide resistance combined with transient transgene expression and potential mobile RNA-based movement of CBE transcripts to neighboring, non-transgenic cells. An FCY-UPP based cytotoxin system was used to select non-transgenic plants that survive after culturing on 5-FC containing medium. While the editing efficiency is higher in poplar than in citrus, our results show that the CBE-based co-editing strategy works in both citrus and poplar, albeit with low efficiency for biallelic edits. Unexpectedly, the addition of the TLS mobile RNA sequence reduced genome editing efficiency in both transgenic and non-transgenic plants. Although a small fraction of escaping plants is detected in both positive and negative selection processes, our data demonstrate a promising approach for generating transgene-free base-edited plants.

Populus↗

Molecularly imprinted polymers for tobacco mosaic virus recognition.

Molecular imprinted Polymers (MIP) targeted for Tobacco mosaic virus (TMV) have been synthesized. Batch equilibrium studies using imprinted and non-imprinted polymer hydrogels in TMV and TNV solutions were conducted to determine virus-binding capacities. TMV-imprinted hydrogels showed increased binding to TMV (8.8 mg TMV/gpolymer) compared to non-imprinted hydrogels (4.2 mg TMV/gpolymer). Furthermore, TMV-imprinted hydrogels exhibited increased binding to TMV compared to TNV, while non-imprinted hydrogels bound similar amounts of TMV or TNV. This research has demonstrated that molecular imprinting of viruses can be used to selectively induce binding of target viruses based on shape differences of their virions.

Biocompatible Materials↗

Characterization of silica-coated tobacco mosaic virus.

The deposition of silica on the surface of tobacco mosaic virus (TMV) is achieved at a higher pH (>7) as a means to enhance its usefulness as a template for the synthesis of nanostructures. Electron energy loss spectroscopy definitively shows the presence of a silica shell on the surface of the TMV while small angle X-ray scattering differentiates successfully between silica-coated TMV and silica particles in the presence of uncoated TMV. Importantly, coating reactions done in a 50% w/v methanol/water solution produce smaller silica nanostructures during the condensation of the hydrolysis intermediates, possibly aiding in obtaining uniform coating. Furthermore, TMV-templated silica coatings are found to enhance the stability of the virus particle in methanol at conditions that would ordinarily disrupt the assembled particle. Combined these findings demonstrate that TMV can function as an efficient template for the controlled deposition of silica at neutral pH.

Journal Article↗

The Tobacco mosaic virus replicase protein disrupts the localization and function of interacting Aux/IAA proteins.

Previously, we identified a correlation between the interaction of the Tobacco mosaic virus (TMV) 126/183-kDa replicase with the auxin response regulator indole acetic acid (IAA)26/PAP1 and the development of disease symptoms. In this study, the TMV replicase protein is shown to colocalize with IAA26 in the cytoplasm and prevent its accumulation within the nucleus. Furthermore, two additional auxin (Aux)/IAA family members, IAA27 and IAA18, were found to interact with the TMV replicase and displayed alterations in their cellular localization or accumulation that corresponded with their ability to interact with the TMV replicase. In contrast, the localization and accumulation of noninteracting Aux/IAA proteins were unaffected by the presence of the viral replicase. To investigate the effects of the replicase interaction on Aux/IAA function, transgenic plants expressing a proteolysis-resistant IAA26-P108L-green fluorescent protein (GFP) protein were created. Transgenic plants accumulating IAA26-P108L-GFP displayed an abnormal developmental phenotype that included severe stunting and leaf epinasty. However, TMV infection blocked the nuclear localization of IAA26-P108L-GFP and attenuated the developmental phenotype displayed by the transgenic plants. Combined, these findings suggest that TMV-induced disease symptoms can be attributed, in part, to the ability of the viral replicase protein to disrupt the localization and subsequent function of interacting Aux/IAA proteins.

Arabidopsis↗

Deposition of platinum clusters on surface-modified Tobacco mosaic virus.

Nanoscaled Pt conductors were prepared from genetically engineered Tobacco mosaic virus (TMV) templates through Pt cluster deposition on the outer surface of the TMV. Pt clusters were synthesized and deposited on the engineered TMV with surface-exposed cysteine via the in situ mineralization of hexachloroplatinate anions. This deposition was driven by the specific binding between thiols and the solid metal clusters. In addition, Pt-thiolate adducts are suggested to form on the engineered TMV in aqueous solutions that work as nucleation sites for the formation of the Pt clusters. The specific binding between Pt clusters and the engineered TMV template was investigated using UV/vis spectrophotometry and quartz crystal microbalance (QCM) analysis. The electric conductance of Pt-deposited TMV was greater than that of the uncoated TMV virion particles. This result suggests the application of metal cluster-deposited engineered TMV in future electrical devices such as rapid response sensors.

Adsorption↗

Effect of CuCl2 concentration on the aggregation and mineralization of Tobacco mosaic virus biotemplate.

Aggregation of the biotemplates in mineralization processes is a considerable obstacle in preparing well-dispersed bio-inorganic hybrid materials. In this study, aggregation and mineralization of Tobacco mosaic virus (TMV) biotemplates were investigated as a function of the copper precursor (CuCl2) concentration. The mean hydrodynamic radius of TMV in an aqueous CuCl2 solution was determined by dynamic light scattering for the monitoring of the TMV aggregation. At CuCl2 concentration of 0.5 mM or higher, the mean hydrodynamic radius of TMV increased dramatically indicating aggregation of the TMV particles. Numerical calculations on the long-range interaction energy between parallel model TMV particles agreed with the experimental observations for the TMV aggregation. Mineralization of copper precursors on the TMV biotemplates was achieved only at the CuCl2 concentrations that induced considerable aggregation of the biotemplate. From the numerical calculations and experimental results, it was concluded that a dense copper cluster deposition cannot be achieved without aggregation of TMV templates.

Copper↗

Patterned assembly of genetically modified viral nanotemplates via nucleic acid hybridization.

The patterning of nanoparticles represents a significant obstacle in the assembly of nanoscale materials and devices. In this report, cysteine residues were genetically engineered onto the virion surface of tobacco mosaic virus (TMV), providing attachment sites for fluorescent markers. To pattern these viruses, labeled virions were partially disassembled to expose 5' end RNA sequences and hybridized to virus-specific probe DNA linked to electrodeposited chitosan. Electron microscopy and RNAase treatments confirmed the patterned assembly of the virus templates onto the chitosan surface. These findings demonstrate that TMV nanotemplates can be dimensionally assembled via nucleic acid hybridization.

Amino Acid Substitution↗

Interaction of the tobacco mosaic virus replicase protein with the Aux/IAA protein PAP1/IAA26 is associated with disease development.

Virus-infected plants often display developmental abnormalities that include stunting, leaf curling, and the loss of apical dominance. In this study, the helicase domain of the Tobacco mosaic virus (TMV) 126- and/or 183-kDa replicase protein(s) was found to interact with the Arabidopsis Aux/IAA protein PAP1 (also named IAA26), a putative regulator of auxin response genes involved in plant development. To investigate the role of this interaction in the display of symptoms, a TMV mutant defective in the PAP1 interaction was identified. This mutant replicated and moved normally in Arabidopsis but induced attenuated developmental symptoms. Additionally, transgenic plants in which the accumulation of PAP1 mRNA was silenced exhibit symptoms like those of virus-infected plants. In uninfected tissues, ectopically expressed PAP1 accumulated and localized to the nucleus. However, in TMV-infected tissues, PAP1 failed to accumulate to significant levels and did not localize to the nucleus, suggesting that interaction with the TMV replicase protein disrupts PAP1 localization. The consequences of this interaction would affect PAP1's putative function as a transcriptional regulator of auxin response genes. This is supported by gene expression data indicating that approximately 30% of the Arabidopsis genes displaying transcriptional alterations in response to TMV contain multiple auxin response promoter elements. Combined, these data indicate that the TMV replicase protein interferes with the plant's auxin response system to induce specific disease symptoms.

Arabidopsis Proteins↗

Tobacco mosaic virus induced alterations in the gene expression profile of Arabidopsis thaliana.

In this study, mRNA profiles generated from cDNA microarrays were used to identify gene expression changes in Arabidopsis thaliana ecotype Shahdara infected with Tobacco mosaic virus (TMV). Shahdara is a susceptible TMV host, permitting rapid accumulations of virus in both inoculated and systemic tissues, accompanied by defined disease symptoms that include stunting, necrosis, and leaf curling. Gene expression profiles were monitored in whole tissues of inoculated leaves at four days postinoculation (dpi) and in systemically infected leaves at 14 dpi. Microarrays contained cDNAs representing between 8,000 and 10,000 Arabidopsis genes. Expression analysis identified 68 genes that displayed significant and consistent changes in expression levels, either up or down, in either TMV inoculated or systemically infected tissues, or both. Identified TMV-responsive genes encode a diverse array of functional proteins that include transcription factors, antioxidants, metabolic enzymes, and transporters. Thus, the TMV infection process has a significant impact on a wide array of cellular processes that likely reflect the biochemical and physiological changes involved in the development of this disease syndrome.

Arabidopsis↗

Oligomerization and activity of the helicase domain of the tobacco mosaic virus 126- and 183-kilodalton replicase proteins.

A protein-protein interaction within the helicase domain of the Tobacco mosaic virus (TMV) 126- and 183-kDa replicase proteins was previously implicated in virus replication (S. Goregaoker, D. Lewandowski, and J. Culver, Virology 282:320-328, 2001). To further characterize the interaction, polypeptides covering the interacting portions of the TMV helicase domain were expressed and purified. Biochemical characterizations demonstrated that the helicase domain polypeptides hydrolyzed ATP and bound both single-stranded and duplexed RNA in an ATP-controlled fashion. A TMV helicase polypeptide also was capable of unwinding duplexed RNA, confirming the predicted helicase function of the domain. Biochemically active helicase polypeptides were shown by gel filtration to form high-molecular-weight complexes. Electron microscopy studies revealed the presence of ring-like oligomers that displayed six-sided symmetry. Taken together, these data demonstrate that the TMV helicase domain interacts with itself to produce hexamer-like oligomers. Within the context of the full-length 126- and 183-kDa proteins, these findings suggest that the TMV replicase may form a similar oligomer.

Adenosine Triphosphatases↗

A nuclear localization signal and a membrane association domain contribute to the cellular localization of the Tobacco mosaic virus 126-kDa replicase protein.

A transient expression system using onion epidermal cells was used to investigate domains of the Tobacco mosaic virus (TMV) 126-kDa replicase protein involved in cellular localization. Initially, a nuclear localization signal (NLS), identified within the amino-terminus of the 126-kDa protein, was investigated for its functionality using fusion constructs containing the green fluorescent protein (GFP). Fusion of the amino-terminal 70 amino acids of the 126-kDa protein, containing the NLS, to a beta-glucuronidase-GFP open reading frame (ORF), directed the accumulation of fluorescence to the nucleus. In contrast, similar constructs lacking the NLS or containing a mutated NLS sequence failed to accumulate within the nucleus. Additional investigations using GFP fusion constructs containing the first 178 or 388 amino acids of the 126-kDa protein also displayed nuclear localization. However, fusion constructs encoding the first 781 amino acids or the entire 126-kDa ORF did not accumulate within the nucleus but instead associated with the endoplasmic reticulum (ER), forming spot-like inclusions. Thus, a dominant ER association domain exists between amino acids 388 and 781 of the 126-kDa protein. Interestingly, a full-length 126-kDa GFP fusion construct encoding a nonfunctional NLS mutation also localized to the ER but did not form inclusions. Furthermore, a TMV mutant containing the same nonfunctional NLS mutation failed to replicate in protoplasts. Together these findings suggest that both the NLS and the ER retention domain contribute to the functional localization of the 126-kDa protein.

Amino Acid Sequence↗

Tobacco mosaic virus assembly and disassembly: determinants in pathogenicity and resistance.

The structural proteins of plant viruses have evolved to self-associate into complex macromolecules that are centrally involved in virus biology. In this review, the structural and biophysical properties of the Tobacco mosaic virus (TMV) coat protein (CP) are addressed in relation to its role in host resistance and disease development. TMV CP affects the display of several specific virus and host responses, including cross-protection, systemic virus movement, hypersensitive disease resistance, and symptom development. Studies indicate that the three-dimensional structure of CP is critical to the control of these responses, either directly through specific structural motifs or indirectly via alterations in CP assembly. Thus, both the structure and assembly of the TMV CP function as determinants in the induction of disease and resistance responses.

Biological Transport↗

Biofabrication with chitosan.

The traditional motivation for integrating biological components into microfabricated devices has been to create biosensors that meld the molecular recognition capabilities of biology with the signal processing capabilities of electronic devices. However, a different motivation is emerging; biological components are being explored to radically change how fabrication is achieved at the micro- and nanoscales. Here we review biofabrication, the use of biological materials for fabrication, and focus on three specific biofabrication approaches: directed assembly, where localized external stimuli are employed to guide assembly; enzymatic assembly, where selective biocatalysts are enlisted to build macromolecular structure; and self-assembly, where information internal to the biological material guides its own assembly. Also reviewed are recent results with the aminopolysaccharide chitosan, a material that offers a combination of properties uniquely suited for biofabrication. In particular, chitosan can be directed to assemble in response to locally applied electrical signals, and the chitosan backbone provides sites that can be employed for the assembly of proteins, nucleic acids, and virus particles.

Animals↗